3,842 Matching Results

Search Results

Advanced search parameters have been applied.
in subjects: "Control Systems"  
Results: 1 - 24 next
open access

DWPF waste glass Product Composition Control System

Description: The Defense Waste Processing Facility (DWPF) will be used to blend aqueous radwaste (PHA) with solid radwaste (Sludge) in a waste receipt vessel (the SRAT). The resulting SRAT material is transferred to the SME an there blended with ground glass (Frit) to produce a batch of melter feed slurry. The SME material is passed to a hold tank (the MFT) which is used to continuously feed the DWPF melter. The melter. The melter produces a molten glass wasteform which is poured into stainless steel canist… more
Date: January 1, 1992
Creator: Brown, K.G. & Postles, R.L.
Item Type: Refine your search to only Article
Partner: UNT Libraries Government Documents Department
open access

Low cost Czochralski crystal growing technology: near term implementation of the flat plate photovoltaic cost reduction of the Low Cost Solar Array Project. Fifth quarterly progress report, April 1-June 30, 1980

Description: During this reporting period, the primary activity has been to develop microprocessor control of the crystal growth process and to develop and demonstrate the accelerated crystal growth program. Accelerated recharging of the quartz crucible by the RF melting of polycrystalline silicon feed rods was deemphasized by JPL primarily due to the unavailability of suitable quality feed rods at an effective economical price. The development of the cold crucible program as an alternative method of crucib… more
Date: January 1, 1980
Creator: Roberts, E. G.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Solar heating and domestic hot water system installed at Kansas City, Fire Station, Kansas City, Missouri. Final report

Description: This document is the final report of the solar energy heating and hot water system installed at the Kansas City Fire Station, Number 24, 2309 Hardesty Street, Kansas City, Missouri. The solar system was designed to provide 47 percent of the space heating, 8800 square feet area and 75 percent of the domestic hot water (DHW) load. The solar system consists of 2808 square feet of Solaron, model 2001, air, flat plate collector subsystem, a concrete box storage subsystem which contains 1428 cubic fe… more
Date: July 1980
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

The U5. 0 undulator design for the advanced light source at LBL

Description: The U5.0 undulator, currently under design, is the first in a series of insertion devices planned for the Advanced Light Source at LBL. U5.0 parameters include a 5 cm period, 5 m length with a 0.837 T maximum field at a 14 mm gap. A hybrid configuration utilizing Nd-Fe-B permanent magnet material and Vanadium Permendur poles is used for the magnetic structure. Construction is modular with many pole assemblies attached to a pole mount, which in turn is fastened onto one of the backing beams. Ver… more
Date: August 1, 1989
Creator: Hoyer, E.; Chin, J.; Halbach, K.; Hassenzahl, W.; Humphries, D.; Kincaid, B. et al.
Item Type: Refine your search to only Article
Partner: UNT Libraries Government Documents Department
open access

The collaborative program of research in engineering sciences

Description: Research programs in the following areas are briefly described: High-Temperature Gas-Particle Reactions; Mathematical Modelling of Plasma Systems; Metal Transfer in Gas Metal-Arc Welding; Multivariable Control of Gas Metal-Arc Welding; Synthesis of Heat and Work Integration Systems for Chemical Process Plants; Parity Simulation of Dynamic Processes; Fundamentals of Elastic-Plastic Fracture: Three-Dimensional and Mechanistic Modelling; and Comminution of Energy Materials. Publications from each … more
Date: August 1, 1989
Creator: White, D.C.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

EPICS System: An Overview

Description: This paper presents an overview of the EPICS control system at FERMILAB. EPICS is a distributed, multi-user, interactive system for the control and monitoring of particle beamlines at a high-energy experimental physics laboratory. The overview discusses the operating environment of the control system, the requirements which determined the design decisions, the hardware and software configurations, and plans for the future growth and enhancement of the present system. This paper is the first of … more
Date: February 1, 1984
Creator: Bartlett, J. F.; Bobbitt, J. S.; Kramper, B. J.; Lahey, T. E.; MacKinnon, B. A. & West, R. E.
Item Type: Refine your search to only Article
Partner: UNT Libraries Government Documents Department
open access

Alignment and focusing device for a multibeam laser system

Description: Large inertial confinement fusion laser systems have many beams focusing on a small target. The Antares system is a 24-beam CO/sub 2/ pulse laser. To produce uniform illumination, the 24 beams must be individually focused on (or near) the target's surface in a symmetric pattern. To assess the quality of a given beam, we will locate a Smartt (point diffraction) interferometer at the desired focal point and illuminate it with an alignment laser. The resulting fringe pattern shows defocus, lateral… more
Date: January 1, 1980
Creator: Sweatt, W.C.
Item Type: Refine your search to only Article
Partner: UNT Libraries Government Documents Department
open access

Experimental process system development unit for producing semiconductor-grade silicon using the silane-to-silicon process. Quarterly progress report, October-December 1979

Description: This program consists of the engineering design, fabrication, assembly, operation, economic analysis, and process support R and D for an Experimental Process System Development Unit (EPSDU). EPSDU equipment specification, vendor development, and evaluation of quotations represent a significant effort which will permit the start of ordering EPSDU equipment during the next quarter. Initial mini-burner test results are encouraging. It appears that a fairly simple and cost-effective waste treatment… more
Date: January 1, 1979
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Performance estimates for personnel access control systems

Description: Current performance estimates for personnel access control systems use estimates of Type I and Type II verification errors. A system performance equation which addresses normal operation, the insider, and outside adversary attack is developed. Examination of this equation reveals the inadequacy of classical Type I and II error evaluations which require detailed knowledge of the adversary threat scenario for each specific installation. Consequently, new performance measures which are consistent … more
Date: October 1, 1980
Creator: Bradley, R. G.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Operating experience with the ALS linac

Description: The linac injector for the Advanced Light Source (ALS) at LBL was recently put into operation. Energy is 50 MeV, frequency 3 GHz. The electron gun delivers up to 6nC in a 3.0-ns bunch at 120 kV. A train of bunches is injected into a 1-Hz booster and accelerated to 1.5 GHz for storage ring injection. A magnetic analysis system is used for optimizing the linac. Measured beam properties from the gun and after acceleration in the linac are described. 9 refs., 3 figs.
Date: May 1, 1991
Creator: Selph, F. & Massoletti, D.
Item Type: Refine your search to only Article
Partner: UNT Libraries Government Documents Department
open access

Repetitive, small-bore two-stage light gas gun

Description: A repetitive two-stage light gas gun for high-speed pellet injection has been developed at Oak Ridge National Laboratory. In general, applications of the two-stage light gas gun have been limited to only single shots, with a finite time (at least minutes) needed for recovery and preparation for the next shot. The new device overcomes problems associated with repetitive operation, including rapidly evacuating the propellant gases, reloading the gun breech with a new projectile, returning the pis… more
Date: January 1, 1991
Creator: Combs, S. K.; Foust, C. R.; Fehling, D. T.; Gouge, M. J. & Milora, S. L.
Item Type: Refine your search to only Article
Partner: UNT Libraries Government Documents Department
open access

Thin polymer icemaker development and test program

Description: We have constructed and tested a small device to produce ice in ice/water mixtures using a cold fluid as the heat sink. The device is a flexible heat exchanger constructed from a thin film of a suitable polymer. When filled with circulating liquid coolant the heat exchanger consists of an inflated series of parallel tubes; ice forms on the outside in complementary half cylinders. When the circulation is cut off, gravity drains the coolant and the static head of the water bath crushes the tubes,… more
Date: August 1, 1991
Creator: Leigh, R.W. (Pratt Inst., Brooklyn, NY (United States))
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

DAS performance analysis

Description: This report begins with an overview of the Data Acquisition System (DAS), which supports several of PPPL's experimental devices. Performance measurements which were taken on DAS and the tools used to make them are then described.
Date: February 1, 1984
Creator: Bates, G.; Bodine, S.; Carroll, T. & Keller, M.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

The safety record at the tritium systems test assembly

Description: This work addresses an important objective of the TSTA-demonstrating that the large tritium inventories required for fusion reactors can be routinely handled, without radiation exposure to operating personnel and without significant environemtnal releases. The techniques by which TSTA has achieved low releases and personnel exposures include high-integrity primary piping systems that exclude contact between tritium and organic materials, a secondary containment system that encloses all primary … more
Date: February 1, 1988
Creator: Coffin, D.O.
Item Type: Refine your search to only Article
Partner: UNT Libraries Government Documents Department
open access

Technical Area 55 Entry Control System (ECS). [Plutonium facilities]

Description: The exchange badge system which was used at the Plutonium Facility located in Technical Area 55 was replaced on a trial basis with an automated Entry Control System. As a result of the success of the trial system, a new system incorporating expanded features and increased reliability is being implemented. The new Entry Control System incorporates several features not previously available in relatively inexpensive entry systems. The reliability of the system is enhanced by redundant microprocess… more
Date: January 1, 1984
Creator: Beaumont, A.; Brundige, E.; DesJardin, R. & Rivera, R.
Item Type: Refine your search to only Article
Partner: UNT Libraries Government Documents Department
open access

Error Analysis of Acceleration Control Loops of a Synchrotron

Description: For beam control during acceleration, it is conventional to derive the frequency from an external reference, be it a field marker or an external oscillator, to provide phase and radius feedback loops to ensure the phase stability, radial position and emittance integrity of the beam. The open and closed loop behaviors of both feedback control and their response under the possible frequency, phase and radius errors are derived from fundamental principles and equations. The stability of the loops … more
Date: January 1, 1991
Creator: Zhang, S. Y. & Weng, W. T.
Item Type: Refine your search to only Article
Partner: UNT Libraries Government Documents Department
open access

Dynamic modeling of transport and positional control of tokamaks

Description: We describe here a numerical model of a free boundary axisymmetric tokamak plasma and its associated control systems. The plasma is modeled with a hybrid method using two-dimensional velocity and flux functions with surface-averaged MHD equations describing the evolution of the adiabatic invariants. Equations are solved for the external circuits and for the effects of eddy currents in nearby conductors. The method is verified by application to several test problems and used to simulate the form… more
Date: October 1, 1985
Creator: Jardin, S. C.; Pomphrey, N. & DeLucia, J.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Computer-Controlled System for Rapid Soil Analysis of /sup 226/Ra

Description: A computer-controlled multichannel analysis system has been developed by the Radiological Survey Activities Group at Oak Ridge National Laboratory (ORNL) for the Department of Energy (DOE) in support of the DOE's remedial action programs. The purpose of this system is to provide a rapid estimate of the /sup 226/Ra concentration in soil samples using a 6 x 9-in. NaI(Tl) crystal containing a 3.25-in. deep by 3.5-in. diameter well. This gamma detection system is controlled by a mini-computer with … more
Date: January 1, 1984
Creator: Doane, R. W.; Berven, B. A. & Blair, M. S.
Item Type: Refine your search to only Article
Partner: UNT Libraries Government Documents Department
open access

Fiber optics and microprocessors: a control-system solution for the laser-fusion environment

Description: The use of fiber optics and microprocessors in a distributed computer control system for a 100-kJ CO/sub 2/ laser fusion facility is described. Gas-laser control systems must operate in an environment in which megavolt Marx circuits generate megampere discharges in the laser amplifiers, with attendant high electromagnetic fields. By linking the distributed controls with fiber optics the adverse effect of these fields on the hard-wired controls is mimimized, and the additional advantage of groun… more
Date: January 1, 1978
Creator: Thuot, M.E.
Item Type: Refine your search to only Article
Partner: UNT Libraries Government Documents Department
open access

Central receiver solar thermal power system, Phase 1. CDRL Item 2. Pilot plant preliminary design report. Volume IV. Receiver subsystem. [10-MW Pilot Plant and 100-MW Commercial Plant]

Description: The conception, design, and testing of the receiver subsystem proposed by the McDonnell Douglas/Rocketdyne Receiver team for the DOE 10-MW Pilot Plant and the 100-MW Commercial Plant are described. The receiver subsystem consists of the receiver unit, the tower on which the receiver unit is mounted above the collector field, and the supporting control and instrumentation equipment. The plans for implementation of the Pilot Plant are given including the anticipated schedule and production plan (… more
Date: November 1, 1977
Creator: Hallet, Jr., R. W. & Gervais, R. L.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Shiva automatic alignment systems: a brief description

Description: A diagram is given of the basic Shiva alignment system. The alignment requirements, as originally specified and as preseently estimated, together with the performance obtained to date from the prototype equipment are described. It is expected that this performance will be satisfactory for even the most alignment-sensitive targets and significantly better than is needed for experiments not requiring highly uniform illumination. The hardware arrangement planned for a typical Shiva chain is shown.
Date: September 6, 1977
Creator: Bliss, E. S.; Summers, M. A.; Cody, R. L.; Boyd, R. D. & Wintemute, J. D.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
Back to Top of Screen