151 Matching Results

Search Results

Advanced search parameters have been applied.

FY 2004 Energy Use and Recommended Energy Conservation Measures - Environmental Technology and National Security Buildings at Pacific Northwest National Laboratory

Description: This report addresses the question of why the ETB on PNNL's campus used about 20% more electricity than the NSB in FY 2004, even though ETB has more energy conservations installed than NSB and the two buildings were built using nearly identical floor plans. It was determined that the difference in electricity use between the two buildings was due to the large number of computers in the basement of ETB. It was further determined that ETB's high electricity consumption rate cannot be remedied until these computers can be relocated to a more suitable facility.
Date: December 15, 2005
Creator: Olson, Norman J.; Hadley, Donald L. & Routh, Richard M.
Partner: UNT Libraries Government Documents Department

Y-12 National Security Complex Water Assessment

Description: The Department of Energy's Federal Energy Management Program (FEMP) sponsored a water assessment at the Y-12 National Security Complex (Y 12) located in Oak Ridge, Tennessee. Driven by mandated water reduction goals of Executive Orders 13423 and 13514, the objective of the water assessment is to develop a comprehensive understanding of the current water-consuming applications and equipment at Y-12 and to identify key areas for water efficiency improvements that could be applied not only at Y-12 but at other Federal facilities as well. FEMP selected Pacific Northwest National Laboratory to coordinate and manage the water assessment. PNNL contracted Water Savers, LLC to lead the technical aspects of the water assessment. Water Savers provided key technical expertise in water auditing, metering, and cooling systems. This is the report of that effort, which concluded that the Y-12 facility could realize considerable water savings by implementing the recommended water efficiency opportunities.
Date: November 1, 2010
Creator: Elam, Shana E.; Bassett, P. & McMordie-Stoughton, Katherine L.
Partner: UNT Libraries Government Documents Department

Sensitivity of MJO to the CAPE lapse time in the NCAR CAM3

Description: Weak and irregular boreal winter MJO in the NCAR CAM3 corresponds to very low CAPE background, which is caused by easy-to-occur and over-dominant deep convection indicating the deep convective scheme uses either too low CAPE threshold as triggering function or too large consumption rate of CAPE to close the scheme. Raising the CAPE threshold from default 70 J/kg to ten times large only enhances the CAPE background while fails to noticeably improve the wind mean state and the MJO. However, lengthening the CAPE lapse time from one to eight hours significantly improved the background in CAPE and winds, and salient features of the MJO. Variances, dominant periods and zonal wave numbers, power spectra and coherent propagating structure in winds and convection associated with MJO are ameliorated and comparable to the observations. Lengthening the CAPE lapse time to eight hours reduces dramatically the cloud base mass flux, which prevents effectively the deep convection from occurring prematurely. In this case, partitioning of deep to shallow convection in MJO active area is about 5:4.5 compared to over 9:0.5 in the control run. Latent heat is significantly enhanced below 600 hPa over the central Indian Ocean and the western Pacific. Such partitioning of deep and shallow convection is argued necessary for simulating realistic MJO features. Although the universal eight hours lies in the upper limit of that required by the quasi-equilibrium theory, a local CAPE lapse time for the parameterized cumulus convection will be more realistic.
Date: September 5, 2007
Creator: LIU, P.; Wang, B. & Meehl, Gerald, A.
Partner: UNT Libraries Government Documents Department

AISI/DOE Technology Roadmap Program: Removal of Residual Elements in The Steel Ladle by a Combination of Top Slag and Deep Injection Practice

Description: The objective of this work was to determine if tin could be removed from liquid steel by a combination of deep injection of calcium and a reducing top-slag practice. The work was carried out in three stages: injection of Ca wire into 35 Kg heats in an induction furnace under laboratory condition; a fundamental study of the solubility of Sn in the slag as a function of oxygen potential, temperature and slag composition; and, two full-scale plant trials. During the first stage, it was found that 7 to 50% of the Sn was removed from initial Sn contents of 0.1%, using 8 to 16 Kg of calcium per tonne of steel. The Sn solubility study suggested that low oxygen potential, high basicity of the slag and lower temperature would aid Sn removal by deep injection of Ca in the bath. However, two full-scale trials at the LMF station in Dofasco's plant showed virtually no Sn removal, mainly because of very low Ca consumption rates used (0.5 to 1.1 Kg/tonne vs. 8 to 16 Kg/tonne used during the induction furnace study in the laboratory). Based on the current price of Ca, addition of 8 to 16 Kg/tonne of steel to remove Sn is too cost prohibitive, and therefore, it is not worthwhile to pursue this process further, even though it may be technically feasible.
Date: August 31, 2001
Creator: Street, S.; Coley, K.S. & Iron, G.A.
Partner: UNT Libraries Government Documents Department

Commercial Fertilizers 1994

Description: This document presents a compilation of annual data about fertilizer use in the USA, including statistics about various kinds of fertilizer, how much and where they are used, chemical composition, etc.
Date: December 1, 1994
Creator: Berry, J.T.
Partner: UNT Libraries Government Documents Department

State of Maine residential heating oil survey: 1994--1995 Season summary

Description: The 1994--95 heating season approached with more attention to petroleum products than experienced in some time. This year, however, the focus was on transportation fuels with the introduction of reformulated gasolines scheduled for the first of 1995. Last year transportation fuels had been in the spotlight in the Northeast as well, for the ills experienced with a new winter mix for diesel fuel. Would RFG have the same dubious entrance as diesel`s winter mix? Would RFG implementation work and what effect would the change in stocks have on the refineries? With worries related to transportation fuels being recognized, would there be reason for concern with heating fuels? As the new year approached, the refineries seemed to have no problem with supplies and RFG stocks were eased in about the second week of December. In Maine, the southern half of the state was effected by the gasoline substitution but seven of Maine`s sixteen counties were directed to follow the recommended criteria. Since the major population concentration lies in the southern three counties, concern was real. Attention paid to emission testing had come to a head in the fall, and RFG complaints were likely. There have been years when snow and cold arrived by Thanksgiving Day. In northern Maine, snow easily covers the ground before the SHOPP survey begins. The fall slipped by with no great shocks in the weather. December was more of the same, as the weather continued to favor the public. Normally the third week in January is considered the coldest time in the year, but not this year. By the end of January, two days were recorded as being more typical of winter. By March and the end of the survey season, one could only recognize that there were perhaps a few cold days this winter. Fuel prices ...
Date: April 1, 1995
Partner: UNT Libraries Government Documents Department

Hawaii energy strategy project 2: Fossil energy review. Task 2: Fossil energy in Hawaii

Description: In Task 2, the authors establish a baseline for evaluating energy use in Hawaii, and examine key energy and economic indicators. They provide a detailed look at fossil energy imports by type, current and possible sources of oil, gas and coal, quality considerations, and processing/transformation. They present time series data on petroleum product consumption by end-use sector, though they caution the reader that the data is imperfect. They discuss fuel substitutability to identify those end-use categories that are most easily switched to other fuels. They then define and analyze sequential scenarios of fuel substitution in Hawaii and their impacts on patterns of demand. They also discuss energy security--what it means to Hawaii, what it means to neighboring economies, whether it is possible to achieve energy security. 95 figs., 48 tabs.
Date: December 1, 1993
Creator: Breazeale, K.; Yamaguchi, N.D. & Keeville, H.
Partner: UNT Libraries Government Documents Department

Petroleum supply monthly, January 1994

Description: Data presented describe the supply and disposition of petroleum products in the United States and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the United States. The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the United States.
Date: January 1, 1994
Partner: UNT Libraries Government Documents Department

Calculation: Values and Consumption Rates of Locally Produced Food and Tap Water for the Receptor of Interest

Description: This calculation produces standard statistical data on the consumption of locally produced food and tap water. The results of this calculation provide input parameters for the GENII-S (Leigh et al. 1993) computer code to support calculation of Biosphere Dose Conversion Factors (BDCF) for the nominal performance (groundwater contamination) scenario and the volcanic eruption (contamination of soil by volcanic ash deposition) scenario. The requirement and parameters for these data are identified in ''Identification Of The Critical Group (Consumption Of Locally Produced Food And Tap Water)'' (CRWMS M&O 2000a). This calculation is performed in accordance with the ''Development Plan for Calculation: Values and Consumption Rates of Locally Produced Food and Tap Water for the Receptor of Interest'' (CRWMS M&O 2000b).
Date: July 31, 2000
Creator: Bland, J.
Partner: UNT Libraries Government Documents Department

D0 Silicon Upgrade: Calc. to Determine Need for a N2 Phase Separator

Description: A nitrogen phase separator is recommended on the liquid supply line at the helium refrigerator plant. This engineering note documents the calculations done to reach that conclusion. The steady state liquid nitrogen consumption rate for the refrigerator, VLPC and solenoid systems is about 30 gal/hr. The estimated heat leak for the piping run to the refrigerator location is 50 watts. The calculated quality at the refrigerator was 0.032. Given this quality, a two phase flow model based on Lockhart-Martinelli and also incorporating Baker diagram nomenclature was run on TK solver. The result of this program was that without the use of a phase separator we could expect a slug flow pattern with a volume fraction of gas of 65%. Based on this, I recommend that we use a phase separator to siphon off the gas before the nitrogen is sent to a standard saver type subcooler. Including the phase separator will help ensure proper operation of the subcooler. The subcooler will help us attempt to deliver single phase liquid to the nitrogen control valves.
Date: April 7, 1995
Creator: Rucinski, Russ
Partner: UNT Libraries Government Documents Department

Petroleum supply monthly, July 1999, with data for May 1999

Description: The Petroleum Supply Monthly (PSM) is one of a family of four petroleum supply publications produced by the Petroleum Division within the Energy Information Administration (EIA) reflecting different levels of data timeliness and completeness. The other publications are the Weekly Petroleum Status Report (WPSR), the Winter Fuels Report, and the Petroleum Supply Annual (PSA). Data presented in the PSM describe the supply and disposition of petroleum products in the US and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the US (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the US. Data presented in the PSM are divided into two sections: Summary Statistics and Detailed Statistics. The Detail Statistics tables of the PSM present statistics for the most current month available as well as year-to-date. In most cases, the statistics are presented for several geographic areas--the US (50 States and the District of Columbia), five PAD Districts, and 12 Refining Districts. At the US and PAD District level, the total volume and the daily rate of activities are presented. The statistics are developed from monthly survey forms submitted by respondents to the EIA and from data provided from other sources.
Date: July 1, 1999
Partner: UNT Libraries Government Documents Department

Natural gas monthly, March 1999

Description: This issue of the Natural Gas Monthly contains estimates for March 1999 for many natural gas data series at the national level. Estimates of national natural gas prices are available through December 1998 for most series. Highlights of the data contained in this issue are listed below. Preliminary data indicate that the national average wellhead price for 1998 declined to 16% from the previous year ($1.96 compared to $2.32 per thousand cubic feet). At the end of March, the end of the 1998--1999 heating season, the level of working gas in underground natural gas storage facilities is estimated to be 1,354 billion cubic feet, 169 billion cubic feet higher than at the end of March 1998. Gas consumption during the first 3 months of 1999 is estimated to have been 179 billion cubic feet higher than in the same period in 1998. Most of this increase (133 billion cubic feet) occurred in the residential sector due to the cooler temperatures in January and February compared to the same months last year. According to the National Weather Service, heating degree days in January 1999 were 15% greater than the previous year while February recorded a 5% increase.
Date: March 1, 1999
Partner: UNT Libraries Government Documents Department

Petroleum supply monthly, March 1999, with data for January 1999

Description: The Petroleum Supply Monthly (PSM) is one of a family of four petroleum supply publications produced by the Petroleum Division within the Energy Information Administration (EIA) reflecting different levels of data timeliness and completeness. The other publications are the Weekly Petroleum Status Report (WPSR), the Winter Fuels Report, and the Petroleum Supply Annual (PSA). Data presented in the PSM describe the supply and disposition of petroleum products in the US and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the US (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the US. Data presented in the PSM are divided into two sections: Summary Statistics and Detailed Statistics.
Date: March 1, 1999
Partner: UNT Libraries Government Documents Department

Household vehicles energy consumption 1994

Description: Household Vehicles Energy Consumption 1994 reports on the results of the 1994 Residential Transportation Energy Consumption Survey (RTECS). The RTECS is a national sample survey that has been conducted every 3 years since 1985. For the 1994 survey, more than 3,000 households that own or use some 6,000 vehicles provided information to describe vehicle stock, vehicle-miles traveled, energy end-use consumption, and energy expenditures for personal vehicles. The survey results represent the characteristics of the 84.9 million households that used or had access to vehicles in 1994 nationwide. (An additional 12 million households neither owned or had access to vehicles during the survey year.) To be included in then RTECS survey, vehicles must be either owned or used by household members on a regular basis for personal transportation, or owned by a company rather than a household, but kept at home, regularly available for the use of household members. Most vehicles included in the RTECS are classified as {open_quotes}light-duty vehicles{close_quotes} (weighing less than 8,500 pounds). However, the RTECS also includes a very small number of {open_quotes}other{close_quotes} vehicles, such as motor homes and larger trucks that are available for personal use.
Date: August 1, 1997
Partner: UNT Libraries Government Documents Department

Electric power monthly: February 1995, with data for November 1994

Description: The Electric Power Monthly (EPM) presents monthly electricity statistics for a wide audience including Congress, Federal and State agencies, the electric utility industry, and the general public. The purpose of this publication is to provide energy decisionmakers with accurate and timely information that may be used in forming various perspectives on electric issues that lie ahead. The EIA collected the information in this report to fulfill its data collection and dissemination responsibilities as specified in the Federal Energy Administration Act of 1974 (Public Law 93-275) as amended. 64 tabs.
Date: February 22, 1995
Partner: UNT Libraries Government Documents Department

Wind-induced interaction of a large cylindrical calorimeter and an engulfing JP-8 pool fire

Description: As part of a research program in fire science and technology at Sandia National Laboratories (SNL), an experimental and computational investigation of the fire phenomenology associated with the presence of a large (3.66 m diameter), fuselage-sized cylindrical calorimeter engulfed in a large (18.9 m diameter) JP-8 pool fire subjected to high (10.2 m/s) winds were performed. The conditions investigated here resulted in a twofold increase in the incident heat flux to the surface of the object relative to heat fluxes typical of large hydrocarbon fires without engulfed objects. Due to the enhanced fuel/air mixing, enhanced turbulence, and larger flame volume, the highest heat fluxes are observed on the leeward side of the calorimeter. Radiative heat fluxes of 150--250 kW/m{sup 2} on this side, with the maximum heat flux occurring near the top of the calorimeter, were measured. Radiative heat fluxes of 60--200 kW/m{sup 2} were measured on the windward side, with the highest heat flux near the bottom of the calorimeter. Measured and predicted heat fluxes to the pool surface of 25--90 kW/m{sup 2} were observed. The presence of the calorimeter tends to decrease the overall fuel consumption rate primarily due to redirection of the flame zone away from the pool surface. Overall, the numerical models does a reasonable job of representing the essential features of the fire environment but under predicts the heat flux to the calorimeter. These results emphasize the importance of considering the wind-induced interaction of fires and large objects when estimating the incident heat fluxes on a engulfed object. The measurements and analyses are of particular interest since few studies to date have addressed cases where the fire and object are of comparable size.
Date: August 1, 1995
Creator: Gritzo, L.A.; Nicolette, V.F.; Murray, D.; Moya, J.L. & Skocypec, R.D.
Partner: UNT Libraries Government Documents Department

The evaluation of retrofit measures in a tall residential building

Description: As part of a joint demonstration effort involving the US Department of Energy (DOE), the US Department of Housing and Urban Development (HUD), Boston Edison Company (BECo), and the Chelsea Housing Authority, Oak Ridge National Laboratory (ORNL) participated in the evaluation of energy and demand saving retrofits for a tall residential building located in Boston. The thirteen story all-electric building underwent window, lighting, and control renovations in December, 1992. annual energy consumption was reduced by 15% and peak demand fell by 17%. Hourly should building consumption data were available for the comparison of pre- and post- conditions and for calibration of a DOE-2.1D simulation model. The analysis found the window retrofit accounted for 90% of total energy savings and 95% of average demand savings, due to reductions in both conduction and infiltration. Benefits from lighting retrofits were low in cooling months and negligible in winter months due to the increase in the demand for electric resistance heating which was proportional to the reduction in lighting capacity. Finally, the simulation model verified that heating system controls had not been used as intended, and that the utility rate structure would not allow cost savings from the original control strategy. These results and other interesting lessons learned are presented.
Date: July 1, 1995
Creator: Abraham, M.M. & McLain, H.A.
Partner: UNT Libraries Government Documents Department

FORSCOM installation characterization and ranking for water efficiency improvement

Description: On March 11, 1994, President Clinton signed Executive Order 12902-Energy Efficiency and Water Conservation at Federal Facilities. Section 302 of the Executive Order calls for energy and water prioritization surveys of federal facilities to be conducted. The surveys will be used to establish priorities for conducting comprehensive facility audits. In response to the requirements of the Executive Order, the U.S. Army Forces Command (FORSCOM) has tasked Pacific Northwest Laboratory (PNL) to initiate a broad study of the water savings potential at each of its major installations. This report provides an assessment of the water, sewer, energy (for hot water production and pumping), and associated cost savings potential at ten of the major FORSCOM installations. This assessment is meant to be a {open_quotes}first pass{close_quotes} estimate of the water savings potential, to assist FORSCOM in prioritizing installations for detailed water audits and potential water efficient retrofits. In addition, the end uses (toilets, sinks, showerheads, irrigation, etc.) with the greatest water savings potential are identified at each installation. This report is organized in the following manner. Following this Introduction, Section 2 provides important background information pertaining to the water analysis. Section 3 describes the methodology employed in the analysis, and Section 4 summarizes the study results. Section 5 prioritizes the installations based on both water/sewer savings and cost associated with water, sewer, and energy savings. Section 6 provides recommendations on where to start detailed water audits, as well as other recommendations. References are listed in Section 7. The appendices provide specific information on the analysis results and methodology, along with a discussion of special issues.
Date: May 1, 1995
Creator: Fitzpatrick, Q.K.; McMordie, K.L. & Di Massa, F.V.
Partner: UNT Libraries Government Documents Department

State energy price and expenditure report, 1995

Description: The State Energy Price and Expenditure Report (SEPER) presents energy price and expenditure estimates individually for the 50 States and the District of Columbia and in aggregate for the US. The estimates developed in the State Energy Price and Expenditure Data System (SEPEDS) are provided by energy source and economic sector and are published for the years 1970 through 1995. Data for all years are available on a CD-ROM and via Internet. Consumption estimates used to calculate expenditures and the documentation for those estimates are taken from the State Energy Data Report 1995, Consumption Estimates (SEDR), published in December 1997. Expenditures are calculated by multiplying the price estimates by the consumption estimates, which are adjusted to remove process fuel; intermediate petroleum products; and other consumption that has no direct fuel costs, i.e., hydroelectric, geothermal, wind, solar, and photovoltaic energy sources.
Date: August 1, 1998
Partner: UNT Libraries Government Documents Department

Quarterly coal report, October--December 1998

Description: The Quarterly Coal Report (QCR) provides comprehensive information about US coal production, distribution, exports, imports, receipts, prices, consumption, and stocks to a wide audience, including Congress, Federal and State agencies, the coal industry, and the general public. Coke production, consumption, distribution, imports, and exports data are also provided. This report presents detailed quarterly data for October through December 1998 and aggregated quarterly historical data for 1992 through the third quarter of 1998. Appendix A displays, from 1992 on, detailed quarterly historical coal imports data. 58 tabs.
Date: July 1, 1999
Partner: UNT Libraries Government Documents Department

State energy data report 1993: Consumption estimates

Description: The State Energy Data Report (SEDR) provides annual time series estimates of State-level energy consumption by major economic sector. The estimates are developed in the State Energy Data System (SEDS), which is maintained and operated by the Energy Information Administration (EIA). The goal in maintaining SEDS is to create historical time series of energy consumption by State that are defined as consistently as possible over time and across sectors. SEDS exists for two principal reasons: (1) to provide State energy consumption estimates to Members of Congress, Federal and State agencies, and the general public; and (2) to provide the historical series necessary for EIA`s energy models.
Date: July 1, 1995
Partner: UNT Libraries Government Documents Department

Advanced direct coal liquefaction concepts. Quarterly report, October 1, 1993--December 31, 1993

Description: Six runs on the bench unit were successfully completed this quarter. The runs covered twenty five different operating conditions and yield periods, and involved 336 hours of operation. In the bench unit, increased temperature of first stage operation (410{degree}C) and direct addition of the powdered solid sodium aluminate to the feed as first stage catalyst improved both coal and carbon monoxide conversion. To achieve 90%+ overall coal conversion, temperatures of 430{degree}C+ were required in the second stage. Oil yields (pentane soluble liquid product) in excess of 65 wt % based on MAF Black Thunder coal, were achieved both with iron oxide/dimethyl disulfide and ammonium molybdate/carbon disulfide second stage catalysts. C{sub l}-C{sub 3} hydrogen gas yields were modest, generally 7-8 wt % on MAF coal, and overall hydrogen consumption (including first stage shift hydrogen) was in the order of 7-8 wt % on MAF coal. The ammonium molybdate catalyst system appeared to give slightly higher oil yields and hydrogen consumption, as was expected, but the differences may not be significant.
Date: December 31, 1993
Creator: Berger, D. J.; Parker, R. J. & Simpson, P. L.
Partner: UNT Libraries Government Documents Department

D0 Silicon Upgrade: Commissioning Test Results for D-Zero's Helium Refrigerator

Description: The test objectives are: (1) Make liquid helium and measure refrigerator capacity; (2) Measure liquid helium dewar heat leak, transfer line heat leak, and liquid nitrogen consumption rates; (3) Operate all cryogenic transfer lines; (4) Get some running time on all components; (5) Debug mechanical components, instrumentation, DMACs user interface, tune loops, and otherwise shake out any problems; (6) Get some operating time in to get familiar with system behavior; (7) Revise and/or improve operating procedures to actual practice; and (8) Identify areas for future improvement. D-Zero's stand alone helium refrigerator (STAR) liquified helium at a rate of 114 L/hr. This is consistent with other STAR installations. Refrigeration capacity was not measured due to lack of a calibrated heat load. Measured heat leaks were within design values. The helium dewar loss was measured at 2 to 4 watts or 9% per day, the solenoid and VLPC helium transfer lines had a heat leak of about 20 watts each. The liquid nitrogen consumption rates of the mobile purifier, STAR, and LN2 subcooler were measured at 20 gph, 20 to 64 gph, and 3 gph respectively. All cryogenic transfer lines including the solenoid and visible light photon counter (VLPC) transfer lines were cooled to their cryogenic operating temperatures. This included independent cooling of nitrogen shields and liquid helium components. No major problems were observed. The system ran quite well. Many problems were identified and corrected as they came up. Areas for improvement were noted and will be implemented in the future. The instrumentation and control system operated commendably during the test. The commissioning test run was a worthwhile and successful venture.
Date: June 30, 1997
Creator: Rucinski, Russ
Partner: UNT Libraries Government Documents Department

The Heat Loss Analysis and Commissioning of a Commercial Helium Dewar (SULI paper)

Description: A low temperature cryostat suitable for many different experiments will be commissioned at the cryogenic test facility at SLAC. The scope of the project is to make commission a commercial Helium dewar. The building of the top flange will be followed from its design phase through to its finished assembly. In addition, diagnostic tools such as thermometry, level detector, pressure gauge, transfer lines for He and N2, vent lines with relief valves for He and N2 will be incorporated. Instrumentation to read and plot this data will also be included. Once the cryostat is assembled, we will cool down the cryostat to measure its performance. A typical consumption rate of Helium will be measured and from this, the overall heat leak to the dewar will be calculated. A processing instrumentation diagram (PID) of the dewar system was created with SolidEdge and was later approved and published as an official SLAC document. The plots comparing the liquid level changes of the 36 inch probe with the time and the heat loss as a function of time proved to be a valid indication that the data was interpreted and recorded correctly and that the dewar was put together successfully.
Date: January 4, 2006
Creator: Bellamy, Marcus & /SLAC, /New Mexico U.
Partner: UNT Libraries Government Documents Department