1,175 Matching Results

Search Results

Advanced search parameters have been applied.

Design of a Monitoring System for a Plasma Cleaning Machine

Description: Plasma cleaning is the most effective dry process to remove surface contaminates from a SAW (Surface Acoustical Wave) device. Consistent gas pressures, flows, and good electrical connections between the chamber shelves are necessary for the process to function predictably. In addition, operation of the monitoring system must be transparent to the plasma cleaning unit. This thesis describes a simple solution to the complex problem of monitoring a plasma cleaning system. The monitoring system uses the LabVIEW® G programming language and hardware, both products of National Instruments, Inc.®, to monitor critical parameters necessary to achieve a consistent process when cleaning these devices.
Date: May 1999
Creator: Fooks, Terry M. (Terry Max)
Partner: UNT Libraries

EUV mask surface cleaning effects on lithography process performance

Description: The reflective, multilayer based, mask architectures for extreme ultraviolet (EUV) lithography are highly susceptible to surface oxidation and contamination. As a result, EUV masks are expected to undergo cleaning processes in order to maintain the lifetimes necessary for high volume manufacturing. For this study, the impact of repetitive cleaning of EUV masks on imaging performance was evaluated. Two, high quality industry standard, EUV masks are used for this study with one of the masks undergoing repeated cleaning and the other one kept as a reference. Lithographic performance, in terms of process window analysis and line edge roughness, was monitored after every two cleans and compared to the reference mask performance. After 8x clean, minimal degradation is observed. The cleaning cycles will be continued until significant loss imaging fidelity is found.
Date: June 18, 2010
Creator: George, Simi; Baclea-an, Lorie Mae; Naulleau, Patrick; Chen, Robert J. & Liang, Ted
Partner: UNT Libraries Government Documents Department

Everyday Performances in U.S. Household Kitchens

Description: BMA Innovation Consulting is committed to serving consumers products that can play a more meaningful role in household cleaning. So far, their innovation department has used psychology-based principles and approaches that have helped them understand consumers’ preferences, attitudes and claimed needs in household cleaning. That said, little information has been collected on the active role that products play or could play as participants in the everyday dynamics of US consumers. An anthropological approach to the study of U.S. kitchens, as an important center of family interaction in U.S. households, should yield important insights to the design and development of products that can more effectively and more actively participate in those dynamics. With this project I am fundamentally proposing a new approach to the identification of critical product design requirements. Figure on the right shows the key differences between the psychology-derived principles the organization is mostly using today vs. the anthropological lenses through which I will be conducting my research. Overall, I will be leveraging existing knowledge in the “individual desires” realm, connecting it to the collective situation & cultural context within which “cleaning action” emerges.
Date: August 2015
Creator: Rosado-Bonilla, Mireilly Ann
Partner: UNT Libraries

Grateful Data: Digital Humanities, Data Cleaning, and the Grateful Dead

Description: Presentation for the 2016 Digital Frontiers Annual Conference. In this presentation, Scott Carlson discusses his efforts to teach data cleaning techniques using publicly available data related to the Grateful Dead, including data from the American Society of Composers, Authors and Publishers, the Internet Archive, and the Internet Movie Database.
Date: September 22, 2016
Creator: Carlson, Scott
Partner: UNT Libraries

Housecleaning made easier.

Description: Describes ways to make housecleaning simple, practical, and efficient; provides instructions for cleaning different types of objects.
Date: 1933
Creator: MacLeod, Sarah J. (Sarah Josephine), b. 1886
Partner: UNT Libraries Government Documents Department

Analysis of Pulse-jet Cleaning of Dust Cake from Ceramic Filter Element

Description: In this study, behaviors of released dust and pressure inside and outside the filter element were observed very precisely. Based on the observation, a simple model correlating between momentum acting on released dust, pressure and, shear and tensile stresses has been proposed. Then its validity was discussed by comparing calculated and experimental results.
Date: September 19, 2002
Creator: Hata, M.; Kanaoka, C.; Furuuchi, M. & Inagaki, T.
Partner: UNT Libraries Government Documents Department

Operability test report for K east basin canister cleaning system

Description: This document summarizes test data computed during the operability test procedure for the K East Basin Canister Cleaning System. Test Results show that the canister cleaning system successfully lowered the dose of each canister tested so that each canister could be disposed of as low level waste.
Date: January 9, 1997
Creator: Crystal, J.B.
Partner: UNT Libraries Government Documents Department

Pulverization Induced Charge: In-Line Dry Coal Cleaning

Description: The technical feasibility of separating mineral matter and pyrite from coal as it is transported from pulverizers to burners in pulverized coal combustion units will be examined. The charge imparted on coal during pulverization and transport to pulverized coal (PC) burners in a utility boiler will be quantified. In addition to field charge measurements, an existing computational model will be extended to numerically simulate charged particle motion in a turbulent gas through an electric field. Results from the field tests and numerical modeling will be employed in design and construction of a laboratory scale pulverizer/classifier. This laboratory unit will be used to quantify the magnitude and differential charge imparted on bituminous and subbituminous coals during pulverization and classification at temperatures and with gaseous constituents typical to utility PC units. An electrostatic separator, designed for in-line operation between pulverizers and PC boilers, will be used to clean prepulverized coals. Theoretical and experimental data are to be used in preparing a preliminary design for a full-scale, (15 ton/hr) in-line, electrostatic coal cleaning device. Finally, the economic potential for application to PC units will be assessed.
Date: January 21, 1998
Creator: Stencel, John M.
Partner: UNT Libraries Government Documents Department

Cleaning of Free Machining Brass

Description: We have investigated four brightening treatments proposed by two cleaning vendors for cleaning free machining brass. The experimental results showed that none of the proposed brightening treatments passed the swipe test. Thus, we maintain the recommendation of not using the brightening process in the cleaning of free machining brass for NIF application.
Date: December 29, 2005
Creator: Shen, T
Partner: UNT Libraries Government Documents Department

Engineering Development of Advanced Physical Fine Coal Cleaing for Premium Fuel Applications

Description: The ash in six common bituminous coals, Taggart, Winifrede, Elkhorn No. 3, Indiana VII, Sunnyside and Hiawatha, could be liberated by fine grinding to allow preparation of clean coal meeting premium fuel specifications (< 1- 2 lb/ MBtu ash and <0.6 lb/ MBtu sulfur) by laboratory and bench- scale column flotation or selective agglomeration. Over 2,100 tons of coal were cleaned in the PDU at feed rates between 2,500 and 6,000 lb/ h by Microcel� column flotation and by selective agglomeration using recycled heptane as the bridging liquid. Parametric testing of each process and 72- hr productions runs were completed on each of the three test coals. The following results were achieved after optimization of the operating parameters: The primary objective was to develop the design base for commercial fine coal cleaning facilities for producing ultra- clean coals which can be converted into coal-water slurry premium fuel. The coal cleaning technologies to be developed were advanced column flotation and selective agglomeration, and the goal was to produce fuel meeting the following specifications -- Less than 2 pounds of ash per million Btu (860 grams per gigajoule) and
Date: September 26, 1997
Creator: Smit, Frank J.; Schields, Gene L.; Jha, Mehesh C. & Moro, Nick
Partner: UNT Libraries Government Documents Department

Dynamic Adhesion and Self-cleaning Mechanisms of Gecko Setae and Spatulae

Description: Geckos can freely climb on walls and ceilings against their body weight at speed of over 1ms-1. Switching between attachment and detachment seem simple and easy for geckos, without considering the surface to be dry or wet, smooth or rough, dirty or clean. In addition, gecko can shed dirt particles during use, keeping the adhesive pads clean. Mimicking this biological system can lead to a new class of dry adhesives for various applications. However, gecko’s unique dry self-cleaning mechanism remains unknown, which impedes the development of self-cleaning dry adhesives. In this dissertation we provide new evidence and self-cleaning mechanism to explain how gecko shed particles and keep its sticky feet clean. First we studied the dynamic enhancement observed between micro-sized particles and substrate under dry and wet conditions. The adhesion force of soft (polystyrene) and hard (SiO2 and Al2O3) micro-particles on soft (polystyrene) and hard (fused silica and sapphire) substrates was measured using an atomic force microscope (AFM) with retraction (z-piezo) speed ranging over 4 orders of magnitude. The adhesion is strongly enhanced by the dynamic effect. When the retraction speeds varies from 0.02 µm/s to 156 µm/s, the adhesion force increases by 10% ~ 50% in dry nitrogen while it increases by 15%~70% in humid air. A dynamic model was developed to explain this dynamic effect, which agrees well with the experimental results. Similar dynamic enhancement was also observed in aqueous solution. The influence of dynamic factors related to the adhesion enhancement, such as particle inertia, viscoelastic deformations and crack propagation, was discussed to understand the dynamic enhancement mechanisms. Although particles show dynamic enhancement, Gecko fabrillar hair shows a totally different trend. The pull off forces of a single gecko seta and spatula was tested by AFM under different pull-off velocities. The result shows that both the spatula and ...
Date: December 2013
Creator: Xu, Quan
Partner: UNT Libraries

THIRD ATOMIC ENERGY COMMISSION AIR CLEANING CONFERENCE HELD AT LOS ALAMOS SCIENTIFIC LABORATORY, SEPTEMBER 21, 22, AND 23, 1953

Description: The operating performance of air-cleaning facilities at AEC installations is reviewed, and fundamental information obtained from basic studies of aerosol behavior is presented. Separate abstracts have been prepared for each paper. (W.L.H.)
Date: November 1, 1954
Partner: UNT Libraries Government Documents Department

The Life-Changing Magic of OpenRefine: The Open-Source Art of Data Decluttering and Organizing

Description: Presentation for the 2017 UNT Open Access Symposium. This presentation provides an overview of a workshop on using OpenRefine to make sense of data, standardize, correct, and rearrange data elements, automate tedious editing, and prepare data for export to other platforms for a variety of uses.
Date: May 18, 2017
Creator: Feustle, Maristella
Partner: UNT Music Library

Novel Laser Ablation Technology for Surface Decontamination

Description: Laser ablation for surface cleaning has been pursued for the removal of paint on airplanes. It has also been pursued for the cleaning of semiconductor surfaces. However, all these approaches have been pursued by laser ablation in air. For highly contaminated surface, laser ablation in air can easily cause secondary contamination. Thus it is not suitable to apply to achieve surface decontamination for DOE facilities since many of these facilities have radioactive contaminants on the surface. Any secondary contamination will be a grave concern. The objective of this project is to develop a novel technology for laser ablation in liquid for surface decontamination. It aims to achieve more efficient surface decontamination without secondary contamination and to evaluate the economic feasibility for large scale surface decontamination with laser ablation in liquid. When laser ablation is pursued in the solution, all the desorbed contaminants will be confined in liquid. The contaminants can be precipitated and subsequently contained in a small volume for disposal. It can reduce the risk of the decontamination workers. It can also reduce the volume of contaminants dramatically.
Date: June 1, 2004
Creator: Cheng, Chung H.
Partner: UNT Libraries Government Documents Department