2,390 Matching Results

Search Results

Advanced search parameters have been applied.

Advances in the theory of box integrals

Description: Box integrals - expectations <|{rvec r}|{sup s}> or <|{rvec r}-{rvec q}|{sup s}> over the unit n-cube (or n-box) - have over three decades been occasionally given closed forms for isolated n,s. By employing experimental mathematics together with a new, global analytic strategy, we prove that for n {le} 4 dimensions the box integrals are for any integer s hypergeometrically closed in a sense we clarify herein. For n = 5 dimensions, we show that a single unresolved integral we call K{sub 5} stands in the way of such hyperclosure proofs. We supply a compendium of exemplary closed forms that naturally arise algorithmically from this theory.
Date: June 25, 2009
Creator: Bailey, David H.; Borwein, J.M. & Crandall, R.E.
Partner: UNT Libraries Government Documents Department

Hydrologic Effects of Annually Diverting 131,000 Acre-Feet of Water from Dillon Reservoir, Central Colorado

Description: From abstract: because of the increased demands for water in eastern Colorado, principally in the urbanizing Denver metropolitan area, increased diversions of water from Dillon Reservoir are planned. Estimates of end-of-month storage in Dillon Reservoir, assuming the reservoir was in place and 131,000 acre-feet of water were diverted from the reservoir each year, were reconstructed by mass balance for the 1931-77 water years. Based on the analysis, the annual maximum end-of-month drawdown below the elevation at full storage would have been 171 feet.
Date: January 1979
Creator: Alley, W. M.; Bauer, D. P.; Veenhuis, J. E. & Brennan, Robert
Partner: UNT Libraries Government Documents Department

Hydrogen separation membranes - annual report for FY 2007.

Description: The objective of this work is to develop dense ceramic membranes for separating hydrogen from other gaseous components in a nongalvanic mode, i.e., without using an external power supply or electrical circuitry.
Date: January 31, 2008
Creator: Chen, L.; Dorris, S. E.; Emerson, J. E.; Lee, T. H.; Park, C. Y.; Picciolo, J. J. et al.
Partner: UNT Libraries Government Documents Department

Eastern Seaboard Electric Grid Fragility Maps Supporting Persistent Availability

Description: Persistently available power transmission can be disrupted by weather causing power outages with economic and social consequences. This research investigated the effects on the national power grid from a specific weather event, Hurricane Irene, that caused approximately 5.7 million customer power outages along the Eastern Seaboard in August of 2011. The objective was to describe the geographic differences in the grid s vulnerability to these events. Individual factors, such as wind speed or precipitation, were correlated with the number of outages to determine the greatest mechanism of power failure in hopes of strengthening the future power grid. The resulting fragility maps not only depicted 18 counties that were less robust than the design-standard robustness model and three counties that were more robust, but also drew new damage contours with correlated wind speeds and county features.
Date: November 1, 2012
Creator: Walker, Kimberly A; Weigand, Gilbert G & Fernandez, Steven J
Partner: UNT Libraries Government Documents Department

Removal of Lattice Imperfections that Impact the Optical Quality of Ti:Sapphire using Advanced Magnetorheological Finishing Techniques

Description: Advanced magnetorheological finishing (MRF) techniques have been applied to Ti:sapphire crystals to compensate for sub-millimeter lattice distortions that occur during the crystal growing process. Precise optical corrections are made by imprinting topographical structure onto the crystal surfaces to cancel out the effects of the lattice distortion in the transmitted wavefront. This novel technique significantly improves the optical quality for crystals of this type and sets the stage for increasing the availability of high-quality large-aperture sapphire and Ti:sapphire optics in critical applications.
Date: February 26, 2008
Creator: Menapace, J A; Schaffers, K I; Bayramian, A J; Davis, P J; Ebbers, C A; Wolfe, J E et al.
Partner: UNT Libraries Government Documents Department

A study of defects on EUV mask using blank inspection, patterned mask inspection, and wafer inspection

Description: The availability of defect-free masks remains one of the key challenges for inserting extreme ultraviolet lithography (EUVL) into high volume manufacturing. yet link data is available for understanding native defects on real masks. In this paper, a full-field EUV mask is fabricated to investigate the printability of various defects on the mask. The printability of defects and identification of their source from mask fabrication to handling were studied using wafer inspection. The printable blank defect density excluding particles and patterns is 0.63 cm{sup 2}. Mask inspection is shown to have better sensitivity than wafer inspection. The sensitivity of wafer inspection must be improved using through-focus analysis and a different wafer stack.
Date: March 12, 2010
Creator: Huh, S.; Ren, L.; Chan, D.; Wurm, S.; Goldberg, K. A.; Mochi, I. et al.
Partner: UNT Libraries Government Documents Department

Development of a RAMI Program for LANSCE upgrade

Description: Improvement of beam availability is a prime objective of the present LANSCE (Los Alamos Neutron Scattering Center) Upgrade. A RAMI (reliability, availability, maintainability, and inspectability) program is being developed to identify the most cost-effective improvements to achieve the availability goal. The beam-delivery system is divided into subsystems appropriate for the modeling of availability. The availability of each subsystem is determined from operation data and assessment of individual component designs. These availability data are incorporated in an availability model to predict the benefit of improvement projects to achieve cost-benefit prioritization. Examination of the data also identifies a comprehensive list of factors affecting availability. A good understanding of these factors using root-cause analysis is essential for availability improvement. This paper describes the RAMI program and the development of the availability model.
Date: May 1, 1995
Creator: Chan, K.C.D.; Hutson, R.L.; Macek, R.J.; Tallerico, P.J. & Wilkinson, C.A.
Partner: UNT Libraries Government Documents Department

Testing of the TriP Chip Running at 132 nsec Using a Modified AFE Board

Description: In this note we describe the first set of tests done with a sample of TriP chips that were mounted on a modified AFE board. The modifications consisted of different firmware and the replacement of one power supply switch. The board used was a standard AFEIc board (red type) on which new MCMs (MCMIIs) were mounted. The new MCMs were designed to support the TriP and emulate the SVX for readout when mounted on an AFEIc board. The TriP and the MCMs are described in Ref. [1]. Two versions of the MCMII were designed and built: one (MCMIIb) supports two TriP chips wirebonded directly to the MCM substrate. The other, (MCMIIc) supports one TriP which can be either wirebonded directly or packaged into a standard TQFP surface mount package. Due to space constraints, this MCM can support only 1 TriP. We tested 6 TriP chips on 3 different MCMIIb (MCMIIb-1, MCMIIb-2 and MCMIIb-3) and 2 other TriPs were tested on MCMIIc, one of them with an unpackaged TriP (MCMIIc-1) and the other with a packaged TriP (MCMIIc-2). A set of 10 programable internal registers control the TriP operation, the description of these registers can be found in [1]. Table 1 shows the values used for the tests described in this note. In Ref. [1] there is a description of the signals that are needed to operate the TriP chip. We implemented in a Field Programable Gate Array (FPGA), also part of the MCM, a set of shift registers that allow us to download via the 1553 interface to the AFE board, any desired timing for the signals that the FPGA has to send to the TriP chip. These registers are run with a 121.21 MHz clock (which is 16x the crossing clock and phase locked to it), which means that ...
Date: December 19, 2003
Creator: al., Juan Estrada et
Partner: UNT Libraries Government Documents Department

Bioavailability: implications for science/cleanup policy

Description: This paper examines the role of bioavailability in risk assessment and cleanup decisions. Bioavailability refers to how chemicals ''behave'' and their ''availability'' to interact with living organisms. Bioavailability has significant implications for exposure risks, cleanup goals, and site costs. Risk to human health and the environment is directly tied to the bioavailability of the chemicals of concern.
Date: December 1, 1998
Creator: Denit, Jeffery & Planicka, J. Gregory
Partner: UNT Libraries Government Documents Department

Comparison of AEO 2007 Natural Gas Price Forecast to NYMEX FuturesPrices

Description: On December 5, 2006, the reference case projections from 'Annual Energy Outlook 2007' (AEO 2007) were posted on the Energy Information Administration's (EIA) web site. We at LBNL have, in the past, compared the EIA's reference case long-term natural gas price forecasts from the AEO series to contemporaneous natural gas prices that can be locked in through the forward market, with the goal of better understanding fuel price risk and the role that renewables play in mitigating such risk (see, for example, http://eetd.lbl.gov/ea/EMS/reports/53587.pdf or http://eetd.lbl.gov/ea/ems/reports/54751.pdf). As such, we were curious to see how the latest AEO gas price forecast compares to the NYMEX natural gas futures strip. This brief memo presents our findings. As a refresher, our past work in this area has found that over the past six years, forward natural gas contracts (with prices that can be locked in--e.g., gas futures, swaps, and physical supply) have traded at a premium relative to contemporaneous long-term reference case gas price forecasts from the EIA. As such, we have concluded that, over the past six years at least, levelized cost comparisons of fixed-price renewable generation with variable-price gas-fired generation that have been based on AEO natural gas price forecasts (rather than forward prices) have yielded results that are 'biased' in favor of gas-fired generation, presuming that long-term price stability is valued. In this memo we simply update our past analysis to include the latest long-term gas price forecast from the EIA, as contained in AEO 2007. For the sake of brevity, we do not rehash information (on methodology, potential explanations for the premiums, etc.) contained in our earlier reports on this topic; readers interested in such information are encouraged to download that work from http://eetd.lbl.gov/ea/EMS/reports/53587.pdf or http://eetd.lbl.gov/ea/ems/reports/54751.pdf. As was the case in the past six AEO releases (AEO 2001-AEO 2006), we ...
Date: December 6, 2006
Creator: Bolinger, Mark & Wiser, Ryan
Partner: UNT Libraries Government Documents Department

Free-Electron Lasers: Present Status and Future Prospects

Description: Free-electron lasers as scientific instruments are reviewed. The present status and future prospects are delineated with attention drawn to the size, complexity, availability, and performance capability of this new tool. The Free-Electron Laser (FEL) was proposed by John Madey in 1970 (1), although earlier work, relevant to the concept, had been performed by Motz (2) and by Phillips (3). Experimental demonstration was achieved by Madey, et. al. in 1975 and 1976 (4). Since that time, FELs of diverse configurations have been operated at several laboratories around the world. At present, FEL development is focused in two directions: in constructing reliable FELs for scientific research and in extending FEL capability to vacuum ultra-violet (VUV) and even shorter wavelengths. In this article we shall only very briefly review the principles of an FEL, putting emphasis on those aspects that limit performance, after which we shall discuss the applications, present status and future prospects of FELs. Much material that we wish to present is in the form of Tables, and they are an essential part of this article.
Date: May 1, 1990
Creator: Kim, K.-J. & Sessler, Andrew M.
Partner: UNT Libraries Government Documents Department

Logging and Agricultural Residue Supply Curves for the Pacific Northwest

Description: This report quantified the volume of logging residues at the county level for current timber harvests. The cost of recovering logging residues was determined for skidding, yearding, loading, chipping and transporting the residues. Supply curves were developed for ten candidate conversion sites in the Pacific Northwest Region. Agricultural field residues were also quantified at the county level using five-year average crop yields. Agronomic constraints were applied to arrive at the volumes available for energy use. Collection costs and transportation costs were determined and supply curves generated for thirteen candidate conversion sites.
Date: January 1, 2001
Creator: Kerstetter, James D. & Lyons, John Kim
Partner: UNT Libraries Government Documents Department

ARM Cloud Retrieval Ensemble Data Set (ACRED)

Description: This document describes a new Atmospheric Radiation Measurement (ARM) data set, the ARM Cloud Retrieval Ensemble Data Set (ACRED), which is created by assembling nine existing ground-based cloud retrievals of ARM measurements from different cloud retrieval algorithms. The current version of ACRED includes an hourly average of nine ground-based retrievals with vertical resolution of 45 m for 512 layers. The techniques used for the nine cloud retrievals are briefly described in this document. This document also outlines the ACRED data availability, variables, and the nine retrieval products. Technical details about the generation of ACRED, such as the methods used for time average and vertical re-grid, are also provided.
Date: September 12, 2011
Creator: Zhao, C; Xie, S; Klein, SA; McCoy, R; Comstock, JM; Delanoƫ, J et al.
Partner: UNT Libraries Government Documents Department

Field Quality Optimization in a Common Coil Magnet Design

Description: This paper presents the results of initial field quality optimization of body and end harmonics in a 'common coil magnet design'. It is shown that a good field quality, as required in accelerator magnets, can be obtained by distributing conductor blocks in such a way that they simulate an elliptical coil geometry. This strategy assures that the amount of conductor used in this block design is similar to that is used in a conventional cosine theta design. An optimized yoke that keeps all harmonics small over the entire range of operation using a single power supply is also presented. The field harmonics are primarily optimized with the computer program ROXIE.
Date: September 1, 1999
Creator: Gupta, R. & Ramberger, S.
Partner: UNT Libraries Government Documents Department

Biospecimen Reporting for Improved Study Quality

Description: Human biospecimens are subjected to collection, processing, and storage that can significantly alter their molecular composition and consistency. These biospecimen preanalytical factors, in turn, influence experimental outcomes and the ability to reproduce scientific results. Currently, the extent and type of information specific to the biospecimen preanalytical conditions reported in scientific publications and regulatory submissions varies widely. To improve the quality of research that uses human tissues, it is crucial that information on the handling of biospecimens be reported in a thorough, accurate, and standardized manner. The Biospecimen Reporting for Improved Study Quality (BRISQ) recommendations outlined herein are intended to apply to any study in which human biospecimens are used. The purpose of reporting these details is to supply others, from researchers to regulators, with more consistent and standardized information to better evaluate, interpret, compare, and reproduce the experimental results. The BRISQ guidelines are proposed as an important and timely resource tool to strengthen communication and publications on biospecimen-related research and to help reassure patient contributors and the advocacy community that their contributions are valued and respected.
Date: December 27, 2010
Creator: Moore, Ph.D., Helen M.; Kelly, Ph.D., Andrea B.; Jewell, Ph.D., Scott D.; McShane, Ph.D., Lisa M.; Clark, M.D., Douglas P.; Greenspan, M.D., Renata et al.
Partner: UNT Libraries Government Documents Department

Biospecimen Reporting for Improved Study Quality (BRISQ)

Description: Human biospecimens are subject to a number of different collection, processing, and storage factors that can significantly alter their molecular composition and consistency. These biospecimen preanalytical factors, in turn, influence experimental outcomes and the ability to reproduce scientific results. Currently, the extent and type of information specific to the biospecimen preanalytical conditions reported in scientific publications and regulatory submissions varies widely. To improve the quality of research utilizing human tissues it is critical that information regarding the handling of biospecimens be reported in a thorough, accurate, and standardized manner. The Biospecimen Reporting for Improved Study Quality (BRISQ) recommendations outlined herein are intended to apply to any study in which human biospecimens are used. The purpose of reporting these details is to supply others, from researchers to regulators, with more consistent and standardized information to better evaluate, interpret, compare, and reproduce the experimental results. The BRISQ guidelines are proposed as an important and timely resource tool to strengthen communication and publications around biospecimen-related research and help reassure patient contributors and the advocacy community that the contributions are valued and respected.
Date: April 26, 2011
Creator: Moore, Ph.D., Helen M.; Kelly Ph.D., Andrea; Jewell Ph.D., Scott D.; McShane Ph.D., Lisa M.; Clark M.D., Douglas P.; Greenspan M.D., Renata et al.
Partner: UNT Libraries Government Documents Department

The plasticity of human breast carcinoma cells is more than epithelial to mesenchymal conversion

Description: The human breast comprises three lineages: the luminal epithelial lineage, the myoepithelial lineage, and the mesenchymal lineage. It has been widely accepted that human breast neoplasia pertains only to the luminal epithelial lineage. In recent years, however, evidence has accumulated that neoplastic breast epithelial cells may be substantially more plastic in their differentiation repertoire than previously anticipated. Thus, along with an increasing availability of markers for the myoepithelial lineage, at least a partial differentiation towards this lineage is being revealed frequently. It has also become clear that conversions towards the mesenchymal lineage actually occur, referred to as epithelial to mesenchymal transitions. Indeed, some of the so-called myofibroblasts surrounding the tumor may indeed have an epithelial origin rather than a mesenchymal origin. Because myoepithelial cells, epithelial to mesenchymal transition-derived cells, genuine stromal cells and myofibroblasts share common markers, we now need to define a more ambitious set of markers to distinguish these cell types in the microenvironment of the tumors. This is necessary because the different microenvironments may confer different clinical outcomes. The aim of this commentary is to describe some of the inherent complexities in defining cellular phenotypes in the microenvironment of breast cancer and to expand wherever possible on the implications for tumor suppression and progression.
Date: May 12, 2001
Creator: Petersen, Ole William; Nielsen, Helga Lind; Gudjonsson, Thorarinn; Villadsen, René Ronnov-Jessen, Lone & Bissell, Mina J.
Partner: UNT Libraries Government Documents Department

Initiation Pressure Thresholds from Three Sources

Description: Pressure thresholds are minimum pressures needed to start explosive initiation that ends in detonation. We obtain pressure thresholds from three sources. Run-to-detonation times are the poorest source but the fitting of a function gives rough results. Flyer-induced initiation gives the best results because the initial conditions are the best known. However, very thick flyers are needed to give the lowest, asymptotic pressure thresholds used in modern models and this kind of data is rarely available. Gap test data is in much larger supply but the various test sizes and materials are confusing. We find that explosive pressures are almost the same if the distance in the gap test spacers are in units of donor explosive radius. Calculated half-width time pulses in the spacers may be used to create a pressure-time curve similar to that of the flyers. The very-large Eglin gap tests give asymptotic thresholds comparable to extrapolated flyer results. The three sources are assembled into a much-expanded set of near-asymptotic pressure thresholds. These thresholds vary greatly with density: for TATB/LX-17/PBX 9502, we find values of 4.9 and 8.7 GPa at 1.80 and 1.90 g/cm{sup 3}, respectively.
Date: February 28, 2007
Creator: Souers, P. C. & Vitello, P.
Partner: UNT Libraries Government Documents Department

Orchestrating Bulk Data Movement in Grid Environments

Description: Data Grids provide a convenient environment for researchers to manage and access massively distributed bulk data by addressing several system and transfer challenges inherent to these environments. This work addresses issues involved in the efficient selection and access of replicated data in Grid environments in the context of the Globus Toolkit{trademark}, building middleware that (1) selects datasets in highly replicated environments, enabling efficient scheduling of data transfer requests; (2) predicts transfer times of bulk wide-area data transfers using extensive statistical analysis; and (3) co-allocates bulk data transfer requests, enabling parallel downloads from mirrored sites. These efforts have demonstrated a decentralized data scheduling architecture, a set of forecasting tools that predict bandwidth availability within 15% error and co-allocation architecture, and heuristics that expedites data downloads by up to 2 times.
Date: January 25, 2005
Creator: Vazhkudai, SS
Partner: UNT Libraries Government Documents Department

The Half-Lives of Aluminum25 and Aluminum26

Description: The availability of separated isotopes of Mg makes it easy to determine the half life of Al{sup 26}, a member of the Wigner series which has long been suspected to have a half life of approximately 7 seconds, but which has not been confirmed because of the masking 7 second activity of Al{sup 26}. Mg{sup 24}, Mg{sup 25} and Mg{sup 26} (in the form of MgO) have been bombarded with protons from the Berkeley Linear Accelerator, with the following results: (1) Mg{sup 24} yields an activity of approximately 23 seconds half life, presumably due to Na{sup 21} from the reaction Mg{sup 24}(p,a)Na{sup 21}; (2) the Mg{sup 25} yields an activity of approximately 8 seconds half life, which they assign to the reaction Mg{sup 25}(p,n)Al{sup 25}; and (3) The Mg{sup 26} yields an activity of approximately 6 seconds half life, assigned to Al{sup 26} according to a similar reaction. It seems probable therefore that the 7 seconds half life normally given for Al{sup 26} is a mixture of these two activities.
Date: April 24, 1948
Creator: Bradner, Hugh & Gow, J.D.
Partner: UNT Libraries Government Documents Department