Search Results

open access

Radiological survey of the inactive uranium-mill tailings at Falls City, Texas

Description: Results of a radiological survey conducted at the Falls City, Texas, site in July 1976 are presented. There are seven partial to fully stabilized tailings piles, and an overburden pile from an open-pit mine. Above ground gamma-ray exposure rate measurements show moderate levels of contamination throughout the area with a maximum exposure rate of 500 ..mu..R/hr above tailings pile 2. The average exposure rate over the different areas varied from 14 ..mu..R/hr over the southwest end of tailings pile 7 to 207 ..mu..R/hr over the northeast end of the same pile. Analyses of surface soil and dry-wash sediment samples, as well as calculations of subsurface /sup 226/Ra distribution, serve to define the spread of tailings around the area. Water erosion of the tailings is evident, but, because of abundant growth of vegetation on the tailings piles, wind erosion probably is not a major problem.
Date: October 1, 1980
Creator: Haywood, F. F.; Christian, D. J.; Loy, E. T.; Lorenzo, D. & Ellis, B. S.
Partner: UNT Libraries Government Documents Department
open access

Particle identification in ultrarelativistic nuclear collisions

Description: The role of particle identification (PID) in both fixed-target and colliding-beam studies of ultrarelativistic nuclear (URN) collisions is examined. The demands placed on the PID systems by peculiarities of URN collisions, such as large multiplicities and the need for simultaneous measurement of a number of observables, are discussed. A variety of PID techniques are reviewed, with emphasis on their applicability and efficiency in the environment of such collisions. Two examples of PID as incorporated into existing fixed-target nuclear-beam experiments are presented. 18 refs., 5 figs.
Date: April 1, 1986
Creator: DiGiacomo, N.J.
Partner: UNT Libraries Government Documents Department
open access

Prospects for physics at e/sup +/e/sup -/ linear colliders

Description: The present thinking on high-energy e/sup /plus//e/sup /minus// linear colliders is reviewed, stressing those points that have consequences for detector design and physics analyses. Detector requirements are discussed. Experimental aspects of the physics that can be done at these colliders are discussed: first the general physics environment, then a standard process, W/sup /plus// W/sup /minus// detection, and finally four examples of the discovery potential of these colliders /emdash/ heavy quarks, heavy leptons, standard Higgs bosons, and charged Higgs bosons. The conclusions of this study will be stated. 23 refs., 40 figs.
Date: March 1, 1988
Creator: Feldman, G. J.
Partner: UNT Libraries Government Documents Department
open access

Hot helium flow test facility summary report

Description: This report summarizes the results of a study conducted to assess the feasibility and cost of modifying an existing circulator test facility (CTF) at General Atomic Company (GA). The CTF originally was built to test the Delmarva Power and Light Co. steam-driven circulator. This circulator, as modified, could provide a source of hot, pressurized helium for high-temperature gas-cooled reactor (HTGR) and gas-cooled fast breeder reactor (GCFR) component testing. To achieve this purpose, a high-temperature impeller would be installed on the existing machine. The projected range of tests which could be conducted for the project is also presented, along with corresponding cost considerations.
Date: June 1, 1980
Partner: UNT Libraries Government Documents Department
open access

The multipulse Thomson scattering diagnostic on the DIII-D tokamak

Description: This paper describes the design and operation of a 40-spatial channel Thomson scattering system that uses multiple 20 Hz Nd:YAG lasers to measure the electron temperature and density profiles periodically throughout an entire plasma discharge. Interference filter polychromators disperse the scattered light which is detected by silicon avalanche photodiodes. The measurable temperature range from 10 eV to 20 keV and the minimum detectable density is about 2 {times} 10{sup 18} m{sup {minus}3}. Laser control and data acquisition are performed in real-time by a VME-based microcomputer. Data analysis is performed by a MicroVAX 3400. Unique features of this system include burst mode'' operation, where multiple lasers are fired in rapid succession (< 10 KHz), real-time analysis capability, and laser beam quality and alignment monitoring during plasma operation. Results of component testing, calibration, and plasma operation are presented. 8 refs. 6 figs.
Date: September 1, 1991
Creator: Carlstrom, T. N.; Campbell, G. L.; DeBoo, J. C.; Evanko, R. G.; Evans, J.; Greenfield, C. M. et al.
Partner: UNT Libraries Government Documents Department
open access

Cross-Spectral Study of the Spatial Relationships in the North Pacific Sea-Surface Temperature Anomaly Field. Report No. 23

Description: Cross-spectral analysis is used to examine the dependence of the temporal covariation of sea-surface temperature (SST) anomalies at pairs of spatially separated points in the North Pacific on (1) the time scale of the variations, (2) the relative displacement of the points and (3) their location within the North Pacific basin. Spatial scales considered here range from 1000 kilometers up to the width of the basin. The study focuses on cross-spectral estimates for the interannual frequency band, 0.125-0.75 yr/sup -1/ although estimates for three other bands spanning higher frequencies are also examined.
Date: March 1, 1980
Creator: Middleton, J.W.
Partner: UNT Libraries Government Documents Department
open access

Numerical simulation of a short RFQ resonator using the MAFIA codes

Description: The electrical characteristics of a short (2{beta}{lambda}=0.4 m) resonator with large modulation (m=4) have been studied using the three dimensional codes, MAFIA. The complete resonator, including the modulated electrodes and a complex support structure, has been simulated using {approximately} 350,000 mesh points. Important characteristics studied include the resonant frequency, electric and magnetic fields distributions, quality factor and stored energy. The results of the numerical simulations are compared with the measurements of an actual resonator and analytical approximations. 7 refs., 3 figs., 1 tab.
Date: January 1, 1991
Creator: Wang, H.; Ben-Zvi, Ilan; Jain, A.; Paul, P. (State Univ. of New York, Stony Brook, NY (United States). Dept. of Physics) & Lombardi, A. (Istituto Nazionale di Fisica Nucleare, Legnaro (Italy). Lab. Nazionale di Legnaro)
Partner: UNT Libraries Government Documents Department
open access

SNAP II Power Conversion System Topical Report No. 16, 2500-Hour Endurance Test of Mercury Rankine Cycle Power System

Description: SNAP 1 is the designation for the 0.5-kw nuclear auxiliary power supply intended for application in a satellite. SNAP 1 was designed to convert thermal energy from the decay of a radioisotope into electrical energy using a Rankine engine with mercury as the working fluid. A successful 2500-hour endurance test is described of a complete developmental version of the SNAP 1 power conversion system utilizing a prototype turbomachinery package, an electrically heated boiler, and an air-cooled condenser. Indications from the data obtained during the test and from inspection of the system following the test were that many more hours of satisfactory operation could have been obtained on all major system components except the rotating unit pump. The mercury-lubricated bearings, the turbine, and the alternator, all demonstrated excellent endurance capability. Based on previous component tests, it is concluded that the pump performance deterioration was caused by air entrainment in the liquid Hg. (auth)
Date: January 1, 1961
Creator: Grevstad, P.E.
Partner: UNT Libraries Government Documents Department
open access

Rigid muffin-tin approximation for the electron-phonon interaction in transition metals

Description: Progress in calculating the electron-phonon parameters of transition metals has been based on either the rigid muffin-tin approximation (RMTA) or the fitted modified tight-binding approximation (FMTBA). The RMTA has been shown to be remarkably accurate for average electron-phonon properties, but there are indications that RMTA matrix elements may be too small at low momentum transfer. An attempt is made to demonstrate these assertions concerning the accuracy of RMTA and the numerous electron-phonon calculations are placed in a broader perspective by a demonstration of how they can be used to explain the trends in the strength of the electron-phonon coupling among the transition metals and the A-15 compounds. (GHT)
Date: January 1, 1980
Creator: Butler, W. H.
Partner: UNT Libraries Government Documents Department
open access

Two exercises in supersymmetry: a low-energy supergravity model and free string field theory

Description: The new features of a supersymmetric standard model in the presence of heavy families are studied. The minimal set of Higgs fields, the desert between the electroweak and the grand unification scale and perturbative values of the dimensionless parameters throughout this region are assumed. Using the numerical as well as the approximate analytic solution of the renormalization group equations, the evolution of all the parameters of the theory are studied in the case of large Yukawa couplings for the fourth family. The desired spontaneous symmetry breaking of the electroweak symmetry takes place only for a rather unnatural choice of the initial values of certain mass parameters at the grand unification scale. If it is gravitino mass smaller than 200 GeV the vacuum expectation values of the Higgs fields emerge necessarily in an interplay of the tree level Higgs potential and its quantum corrections and are approximately equal. The qurak masses of the fourth family are roughly 135 GeV, while the mass of the fourth charged lepton has an upper bound of 90 GeV. Further characteristic features of this scenario are one light neutral Higgs field of mass 50 GeV and gluino masses below 75 GeV. If the gravitino mass is higher than 200 GeV one obtains a scaled up version of the well-known three family, heavy top scenario with quark masses between 40 and 205 GeV and all superparticle masses heavier than 150 GeV except the photino, gluino, one chargino and one neutralino. The gauge-invariant theory of the free bosonic open string is generalized to treat closed strings and superstrings. All of these theories can be written as theories of string differential forms defined on suitable spaces. All of the bosonic theories have exactly the same structure; the Ramond theory takes an analogous first-order form. We show explicitly, how to …
Date: September 1, 1986
Creator: Preitschopf, C.R.
Partner: UNT Libraries Government Documents Department
open access

Assessment of research and development (R and D) needs in ammonia safety and environmental control

Description: This report characterizes the ammonia industry operations, reviews current knowledge of ammonia release and subsequent impacts, summarizes the status of release prevention and control methods and identify research and development needs for safety and environmental control. Appendices include: accidental spills and human exposure; adiabatic mixing of liquid nitrogen and air; fire and explosion hazards; and environmental impact rating tables. (PSB)
Date: September 1, 1981
Creator: Brenchley, D.L.; Athey, G.F. & Bomelburg, H.J.
Partner: UNT Libraries Government Documents Department
open access

ANHARMONIC POTENTIAL CONSTANTS AND THEIR DEPENDENCE UPON BOND LENGTH

Description: Empirical study of cubic and quartic vibrational force constants for diatomic molecules shows them to be approximately exponential functions of internuclear distance. A family of curves is obtained, determined by the location of the bonded atoms in rows of the periodic table. Displacements between successive curves correspond closely to those in Badger's rule for quadratic force constants (for which the parameters are redetermined to accord with all data now available). Constants for excited electronic and ionic states appear on practically the same curves as those for the ground states. Predictions based on the diatomic correlations agree with the available cubic constants for bond stretching in polyatomic molecules, regardless of the type of bonding involved. Implications of these regularities are discussed. (auth)
Date: August 1, 1961
Creator: Herschbach, D.R. & Laurie, V.W.
Partner: UNT Libraries Government Documents Department
open access

Amplification of a bi-phase shift-key modulated signal by a mm-wave FEL

Description: Bi-phase shift keying (BPSK) is a modulation scheme used in communications and radar in which the phase of a transmitted rf signal is switched in a coded pattern between discrete values differing by {pi} radians. The transmitted information rate (in communications) or resolution (in imaging radar) depends on the rate at which the transmitted signal can be modulated. Modulation rates of greater than 1 GHz are generally desired. Although the instantaneous gain bandwidth of a mm-wave FEL amplifier can be much greater than 10 GHz, slippage may limit the BPSK modulation rate that can be amplified. Qualitative slippage arguments would limit the modulation rate to relatively low values; nevertheless, simulations with a time-dependent FEL code (GINGER) indicate that rates of 2 GHz or more are amplified without much loss in modulation integrity. In this paper we describe the effects of slippage in the simulations and discuss the limits of simple arguments.
Date: October 1, 1991
Creator: Prosnitz, D.; Scharlemann, E.T. & Sheaffer, M.K.
Partner: UNT Libraries Government Documents Department
open access

Nuclear safety guide TID-7016 Revision 2

Description: The present revision of TID-7016 Nuclear Safety Guide is discussed. This Guide differs significantly from its predecessor in that the latter was intentionally conservative in its recommendations. Firmly based on experimental evidence of criticality, the original Guide and the first revision were considered to be of most value to organizations whose activities with fissionable materials were not extensive and, secondarily, that it would serve as a point of departure for members of established nuclear safety teams, experienced in the field. The reader will find a significant change in the character of information presented in this version. Nuclear Criticality Safety has matured in the past twelve years. The advance of calculational capability has permitted validated calculations to extend and substitute for experimental data. The broadened data base has enabled better interpolation, extension, and understanding of available, information, especially in areas previously addressed by undefined but adequate factors of safety. The content has been thereby enriched in qualitative guidance. The information inherently contains, and the user can recapture, the quantitative guidance characteristic of the former Guides by employing appropriate safety factors. In fact, it becomes incumbent on the Criticality Safety Specialist to necessarily impose safety factors consistent with the possible normal and abnormal credible contingencies of an operation as revealed by his evaluation. In its present form the Guide easily becomes a suitable module in any compendium or handbook tailored for internal use by organizations. It is hoped the Guide will continue to serve immediate needs and will encourage continuing and more comprehensive efforts toward organizing nuclear criticality safety information.
Date: January 1, 1980
Creator: Thomas, J T
Partner: UNT Libraries Government Documents Department
open access

Assessment of light water reactor fuel damage during a reactivity initiated accident

Description: This paper presents an assessment of LWR fuel damage during a reactivity initiated accident and comments on the adequacy of the present USNRC design requirements. Results from early SPERT tests are reviewed and compared with results from recent computer simulations and PBF tests. A progression of fuel rod and cladding damage events is presented. High strain rate deformation of relatively cool irradiated cladding early in the transient may result in fracture at a radial average peak fuel enthalpy of approximately 140 cal/g UO/sub 2/. Volume expansion of previously irradiated fuel upon melting may cause deformation and rupture of the cladding, and coolant channel blockage at higher peak enthalpies.
Date: January 1, 1980
Creator: MacDonald, P. E.; Seiffert, S. L.; Martinson, Z. R.; McCardell, R. K.; Owen, D. E. & Fukuda, S. K.
Partner: UNT Libraries Government Documents Department
open access

Recovery of deformed and hydrogen-charge palladium

Description: Positron lifetime and Doppler-broadening studies made at 300 K have been used to investigate the interaction between interstitial hydrogen and lattice defects in deformed Pd. Specimens were charged with hydrogen at 300 K to levels up to 0.1%. The presence of hydrogen was found to have no effect on the recovery curves of Pd upon annealing to 400/sup 0/C. By 400/sup 0/C the values for both lifetime and Doppler-broadening for both cold worked and cold worked plus hydrogen were below the values obtained for annealed pure Pd. This can be interpreted as gaseous-impurity-trapped vacancies being present after the 1200/sup 0/C anneal, but being swept away by the dislocation microstructure recovery between 200 to 400/sup 0/C.
Date: January 1, 1982
Creator: Snead, C. L. Jr.; Lynn, K. G. & Lynch, J. F.
Partner: UNT Libraries Government Documents Department
open access

INSPECT: a package of computer programs for planning and evaluating safeguards inspections

Description: As part of the US Program of Technical Assistance to IAEA Safeguards, PNL has developed a package of computer programs, called INSPECT, that can be used in planning and evaluating safeguards inspections of various types of nuclear facilities. The programs are based on the statistical methods described in Part F of the IAEA Safeguards Technical Manual and can be used to calculate the variance components of the MUF (Material Unaccounted For) statistic, the variance components of the D (difference) statistic, attribute and variables sampling plans, and a measure of the effectiveness of the inspection plan. The paper describes the programs, reviews a number of applications, and indicates areas for future work.
Date: January 1, 1980
Creator: Mullen, M.F.
Partner: UNT Libraries Government Documents Department
Back to Top of Screen