30 Matching Results

Search Results

Advanced search parameters have been applied.
in creator/contributor: "Zhang, Haifeng"  
Results: 1 - 24 next
open access

Self -powered Wireless Hybrid Density/Level Sensing with Differential Pressure Sensors for Safeguarding and Monitoring of Electrochemical Processing of Nuclear Spent Fuel

Description: Data management plan for the grant "Self -powered Wireless Hybrid Density/Level Sensing with Differential Pressure Sensors for Safeguarding and Monitoring of Electrochemical Processing of Nuclear Spent Fuel."
Date: 2023-03-07/2026-03-06
Creator: Zhang, Haifeng
Item Type: Refine your search to only Text
Partner: UNT College of Engineering
open access

Accelerated Corrosion Test with Operation Simulation of All-Aluminum Microchannel Heat Exchangers

Description: The HVAC&R industry is looking to transition from copper-aluminum heat exchangers to all-aluminum microchannel technology. The want for the transition stemmed from seeing the performance improvement of all-aluminum microchannel radiators in the automotive industry. Applications differ between the two industries; therefore, applying this technology for HVAC&R use must be validated. Research towards operating modes of an all-aluminum heat exchanger in a defined corrosive environment will provide … more
Date: May 2016
Creator: Vaughan, Haydn
Item Type: Refine your search to only Thesis or Dissertation
Partner: UNT Libraries
open access

Seismic Performance Evaluation of Novel Cold-Formed Steel Framed Shear Walls Sheathed with Corrugated Steel Sheets

Description: This thesis presents experiments and numerical analysis of a novel cold-formed steel framed shear wall sheathed with corrugated steel sheets. The objective of this newly designed shear wall is to meet the growing demand of mid-rise buildings and the combustibility requirement in the International Building Code. The strength of the novel shear wall is higher than currently code certified shear wall in AISI S400-15 so that it could be more favorable for mid-rise building in areas that are prone t… more
Date: August 2017
Creator: Lan, Xing
Item Type: Refine your search to only Thesis or Dissertation
Partner: UNT Libraries
open access

Selective H2 sensing using lanthanum doped zinc oxide thin film: A study of temperature dependence H2 sensing effect on carrier reversal activity

Description: Article demonstrates a highly sensitive H₂ gas sensor using a lanthanum doped ZnO (La_ZnO) thin film operated at 300 °C. Pure and lanthanum doped (1–10 at. %) ZnO thin films were successfully synthesized using the sol-gel route.
Date: September 4, 2020
Creator: Zhang, Chen; Ju, Shuai; Zhang, Haifeng & Ghosh, Abhishek
Item Type: Refine your search to only Article
Partner: UNT College of Engineering
open access

Denim Fiberboard Fabricated from MUF and pMDI Hybrid Resin System

Description: In this study, a series of denim fiberboards are fabricated using two different resins, malamine urea formaldehyde (MUF) and polymeric methylene diphenyl diisocyanate (pMDI). Two experimental design factors (1) adhesive content and (2) MUF-pMDI weight ratio, were studied. All the denim fiberboard samples were fabricated following the same resin blending, cold-press and hot-press procedures. The physical and mechanical tests were conducted on the fiberboard following the procedures described in … more
Date: May 2019
Creator: Cui, Zhiying
Item Type: Refine your search to only Thesis or Dissertation
Partner: UNT Libraries
open access

Development and Test of High-Temperature Piezoelectric Wafer Active Sensors for Structural Health Monitoring

Description: High-temperature piezoelectric wafer active sensors (HT-PWAS) have been developed for structure health monitoring at hazard environments for decades. Different candidates have previously been tested under 270 °C and a new piezoelectric material langasite (LGS) was chosen here for a pilot study up to 700 °C. A preliminary study was performed to develop a high temperature sensor that utilizes langasite material. The Electromechanical impedance (E/M) method was chosen to detect the piezoelectric p… more
Date: December 2014
Creator: Bao, Yuanye
Item Type: Refine your search to only Thesis or Dissertation
Partner: UNT Libraries
open access

Application of Cyclic Polarization of Aluminum 3003 Used in All-Aluminum Microchannel Heat Exchangers

Description: All-aluminum microchannel heat exchangers are designed to significantly reduce refrigerant charge requirements, weight, reduced brazed joints, and decreased potential for leakage by increasing reliability. Al 3003 alloy is corrosion resistant and can be formed, welded, and brazed but the issue with all-aluminum heat exchangers is localized corrosion (pitting) in corrosive environments. Currently, there is no universally accepted corrosion test that all coil manufacturers use to characterize the… more
Date: May 2015
Creator: Barnes, Javier
Item Type: Refine your search to only Thesis or Dissertation
Partner: UNT Libraries
open access

Shear and Bending Strength of Cold-Formed Steel Solid Wall Panels Using Corrugated Steel Sheets for Mobile Shelters

Description: The objective of this thesis is to determine if the single sided resistance spot weld (RSW) can be used as a feasible connection method for cold formed steel (CFS) shear walls subject to lateral force of either seismic or wind loads on mobile shelters. The research consisted of three phases which include: a design as a 3D BIM model, connection tests of the resistance spot weld, and full-scale testing of the designed solid wall panels. The shear wall testing was conducted on specimens with both … more
Date: December 2017
Creator: Derrick, Nathan Lynn
Item Type: Refine your search to only Thesis or Dissertation
Partner: UNT Libraries
open access

PM2.5 Particle Sensing and Fit Factor Test of a Respirator with SAW-Based Sensor

Description: PM2.5 particle sensing has been done using surface acoustic wave based sensor for two different frequencies. Due to mass loading and elasticity loading on the sensor's surface, the center frequency of the sensor shifts. The particle concentration can be tracked based on that frequency shift. The fit factor test has been conducted using higher frequency SAW sensor. The consist results has been achieved for particle sensing and fit factor test with SAW based sensor.
Date: May 2023
Creator: Desai, Mitali Hardik
Item Type: Refine your search to only Thesis or Dissertation
Partner: UNT Libraries
open access

The Design and Development of Lightweight Composite Wall, Roof, and Floor Panels for Rigid Wall Shelter

Description: This thesis presents a research effort aimed at developing a stronger, lighter, and more economic shelter using rigid wall panels. Reported herein is insulation research, wall and roof panel design and testing, floor section modeling and strength calculations, and cost and weight calculations. Beginning stages focus on developing solid wall and roof panels using cold-formed steel corrugated sheathing and members, as well as polyurethane spray foam for insulation. This research includes calculat… more
Date: May 2018
Creator: Artman, Jeremy J
Item Type: Refine your search to only Thesis or Dissertation
Partner: UNT Libraries

Structural, Thermal, and Corrosion Properties of a Cold-Formed Steel Rigid Wall Relocatable Shelter

Description: A prototype rigid wall relocatable shelter was designed and constructed using cold-formed steel (CFS) construction techniques including shear walls with corrugated sheathings. The design of the shelter was to be mechanically sound with adequate thermal performance and resistance to corrosion. Modeling of structural shear walls was performed using ABAQUS and verified with experimental results. At the project's conclusion, a completed full-scale prototype shelter was constructed.
Date: May 2020
Creator: Rowen, Alexander David
Item Type: Refine your search to only Thesis or Dissertation
Partner: UNT Libraries

Wireless Surface Acoustic Wave Sensor for PM2.5 Detection

Description: Currently, there is no equipment to measure the real-time fit of EHMR or N-95masks which are used in harsh environments. Improper fit of these EHMRs or N-95 masks exposes the personnel to hazardous environments. Surface acoustic wave (SAW) sensors have been around for few decades and are being used in various applications. In this work, real-time PM2.5 detection using passive wireless SAW sensors is presented. The design of meander antenna at 433MHz for wireless interrogation of SAW sensor usin… more
Date: May 2022
Creator: Mamidipally, Sai Karthik
Item Type: Refine your search to only Thesis or Dissertation
Partner: UNT Libraries
open access

Analytical Model of Cold-formed Steel Framed Shear Wall with Steel Sheet and Wood-based Sheathing

Description: The cold-formed steel framed shear walls with steel sheets and wood-based sheathing are both code approved lateral force resisting system in light-framed construction. In the United States, the current design approach for cold-formed steel shear walls is capacity-based and developed from full-scale tests. The available design provisions provide nominal shear strength for only limited wall configurations. This research focused on the development of analytical models of cold-formed steel framed s… more
Date: May 2013
Creator: Yanagi, Noritsugu
Item Type: Refine your search to only Thesis or Dissertation
Partner: UNT Libraries
open access

Energy Harvesting Wireless Piezoelectric Resonant Force Sensor

Description: The piezoelectric energy harvester has become a new powering option for some low-power electronic devices such as MEMS (Micro Electrical Mechanical System) sensors. Piezoelectric materials can collect the ambient vibrations energy and convert it to electrical energy. This thesis is intended to demonstrate the behavior of a piezoelectric energy harvester system at elevated temperature from room temperature up to 82°C, and compares the system’s performance using different piezoelectric materials.… more
Date: December 2013
Creator: Ahmadi, Mehdi
Item Type: Refine your search to only Thesis or Dissertation
Partner: UNT Libraries
open access

Angular Analysis of a Wide-Band Energy Harvester based on Mutually Perpendicular Vibrating Piezoelectric Beams

Description: The recent advancements in electronics and the advents of small scaled instruments has increased the attachment of life and functionality of devices to electrical power sources but at the same time granted the engineers and companies the ability to use smaller sources of power and batteries. Therefore, many scientists have tried to come up with new solutions for a power alternatives. Piezoelectric is a promising material which can readily produce continuous electric power from mechanical inputs… more
Date: December 2016
Creator: Mirzaabedini, Sohrab
Item Type: Refine your search to only Thesis or Dissertation
Partner: UNT Libraries
open access

Optimization of Silica Nanocomposite Membranes for Air Dehumidification

Description: This thesis is focused on understanding the correct method to simulate atomistic models to calculate coefficient of diffusion of water through the membrane. It also aims to fix the method previously used in molecular modelling in which the simulation results did not match the experimental results. These membranes will be used in air dehumidification systems. The four types of membranes namely, polyurethane, polyurethane with silica nano particles, polyurethane with silica nano particles and ami… more
Date: May 2022
Creator: Appaji, Tejas
Item Type: Refine your search to only Thesis or Dissertation
Partner: UNT Libraries
open access

Microcantilever Based Viscosity Measurement as it Applies to Oscillation Amplitude Response

Description: The goal of this research is to measure viscosity via the analysis of amplitude response of a piezo driven vibrating cantilevers partially immersed in a viscous medium. As a driving frequency is applied to a piezoceramic material, the external forces acting on the system will affect its maximum amplitude. This thesis applies this principle through experimental and analytical analyses of the proportional relationship between viscosity and the amplitude response of the first natural frequency mod… more
Date: August 2018
Creator: Siegel, Sanford H.
Item Type: Refine your search to only Thesis or Dissertation
Partner: UNT Libraries
open access

Design, Modeling, and Experiment of a Piezoelectric Pressure Sensor based on a Thickness-Shear Mode Crystal Resonator

Description: This thesis presents the design, modeling, and experiment of a novel pressure sensor using a dual-mode AT-cut quartz crystal resonator with beat frequency analysis based temperature compensation technique. The proposed sensor can measure pressure and temperature simultaneously by a single AT-cut quartz resonator. Apart from AT-cut quartz crystal, a newly developed Langasite (LGS) crystal resonator is also considered in the proposed pressure sensor design, since LGS can operate in a higher tempe… more
Date: May 2017
Creator: Pham, Thanh Tuong
Item Type: Refine your search to only Thesis or Dissertation
Partner: UNT Libraries
open access

Effects of Processing Techniques on Mechanical Properties of Selected Polymers

Description: The mechanical properties of a polymer represent the critical characteristics to be considered when determining the applications for it. The same polymer processed with different methods can exhibit different mechanical properties. The purpose of this study is to investigate the difference in mechanical properties of the selected polymers caused by different processing techniques and conditions. Three polymers were studied, including low density polyethylene (LDPE), polypropylene (PP), and NEXP… more
Date: May 2013
Creator: Dong, Yao
Item Type: Refine your search to only Thesis or Dissertation
Partner: UNT Libraries
open access

Piezoelectric-Based Gas Sensors for Harsh Environment Gas Component Monitoring

Description: In this study, gas sensing systems that are based on piezoelectric smart material and structures are proposed, designed, developed, and tested, which are mainly aimed to address the temperature dependent CO2 gas sensing in a real environment. The state-of-the-art of gas sensing technologies are firstly reviewed and discussed for their pros and cons. The adsorption mechanisms including physisorption and chemisorption are subsequently investigated to characterize and provide solutions to various … more
Date: August 2019
Creator: Zhang, Chen
Item Type: Refine your search to only Thesis or Dissertation
Partner: UNT Libraries
open access

Design of Frequency Output Pressure Transducer

Description: Piezoelectricity crystal is used in different area in industry, such as downhole oil, gas industry, and ballistics. The piezoelectricity crystals are able to create electric fields due to mechanical deformation called the direct piezoelectric effect, or create mechanical deformation due to the effect of electric field called the indirect piezoelectric effect. In this thesis, piezoelectricity effect is the core part. There are 4 parts in the frequency output pressure transducer: two crystal osci… more
Date: August 2015
Creator: Ma, Jinge
Item Type: Refine your search to only Thesis or Dissertation
Partner: UNT Libraries
open access

The Measurement of the Third-order Elastic Constants for La3ga5sio14 (Lgs) and La3ga55ta05o14 (Lgt) Single Crystal

Description: Recently, the development of electronic technology towards higher frequencies and larger band widths has led to interest in finding new piezoelectric materials, which could be used to make filters with larger pass band widths and oscillators with better frequency stability. Langasite (La3Ga5SiO14, LGS) and its isomorphs have enticed considerable attention of researchers as a potential substrate material for piezoelectric device applications because of its high frequency stability and fairly goo… more
Date: December 2013
Creator: Karim, Md Afzalul
Item Type: Refine your search to only Thesis or Dissertation
Partner: UNT Libraries
Back to Top of Screen