27 Matching Results

Search Results

Advanced search parameters have been applied.

Calotte Hat

Description: Calotte of black felt with brown mink trim around front and sides. Quilted crown. Black grosgrain inner hatband; unlined. Retailer's label on inside hatband: "The Fair / Fort Worth"
Date: 1943
Partner: UNT College of Visual Arts + Design

Man's Coat

Description: Man's coat of raccoon fur. Full length, with shawl collar. Two outer pockets trimmed with raccoon tails. Double-breasted center front opening with 8 round 1 1/2" leather covered buttons with loop closures. Long sleeves, with inner ribbed knit(?) cuffs. 51" from center back neckline to hem line. Upper lining of brown silk (?), and lower section lined with plaid wool. Inner pocket on left side. No labels in garment. Name inked inside inner pocket: "Ellison"
Date: 1930/1939
Partner: UNT College of Visual Arts + Design

Calotte Hat

Description: Calotte style hat of black velvet with black pleated satin coil wrapping around brim of hat. Two vertical bands of rhinestones embellish left and right front of hat. Retailer's label on inside headband: "The Fair / Fort Worth"
Date: 1955~
Partner: UNT College of Visual Arts + Design

Calotte Hat

Description: Calotte style hat of stiffened black woven fabric. One black velvet bow in the back and alternating black woven and black velvet "half bows" around edge of crown. Black veil in front. Retailer's label on inside crown: "The Fair / Fort Worth"
Date: 1955~
Partner: UNT College of Visual Arts + Design

Main-coolant-pump shaft-seal guidelines. Volume 3. Specification guidelines. Final report. [PWR; BWR]

Description: This report presents a set of guidelines and criteria to aid in the generation of procurement specifications for Main Coolant Pump Shaft Seals. The noted guidelines are developed from EPRI sponsored nuclear power plant seal operating experience studies, a review of pump and shaft seal literature and discussions with pump and seal designers. This report is preliminary in nature and could be expanded and finalized subsequent to completion of further design, test and evaluation efforts.
Date: March 1, 1983
Creator: Fair, C.E. & Greer, A.O.
Partner: UNT Libraries Government Documents Department

Main-coolant-pump shaft-seal guidelines. Volume 1. Maintenance-manual guidelines. Final report. [PWR; BWR]

Description: This report presents a set of guidelines and a listing of information and data which should be included in maintenance manuals and procedures for Main Coolant Pump Shaft Seals. The noted guidelines and data listing are developed from EPRI sponsored nuclear plant seal operating experience studies. The maintenance oriented results of the most recent such study is summarized. The shaft seal and its auxiliary supporting systems are discussed from both technical and maintenance related viewpoints.
Date: March 1, 1983
Creator: Fair, C.E. & Greer, A.O.
Partner: UNT Libraries Government Documents Department

Main-coolant-pump shaft-seal guidelines. Volume 2. Operational guidelines. Final report. [PWR; BWR]

Description: This report presents a set of guidelines and criteria for improving main coolant pump shaft seal operational reliability. The noted guidelines are developed from EPRI sponsored nuclear power plant seal operating experience studies. Usage procedures/practices and operational environment influence on seal life and reliability from the most recent such survey are summarized. The shaft seal and its auxiliary supporting systems are discussed both from technical and operational related viewpoints.
Date: March 1, 1983
Creator: Fair, C.E. & Greer, A.O.
Partner: UNT Libraries Government Documents Department

Alignment and operability analysis of a vertical sodium pump

Description: With the objective of identifying important alignment features of pumps such as FFTF, HALLAM, EBR II, PNC, PHENIX, and CRBR, alignment of the vertical sodium pump for the Clinch River Breeder Reactor Plant (CRBRP) is investigated. The CRBRP pump includes a flexibly coupled pump shaft and motor shaft, two oil-film tilting-pad hydrodynamic radial bearings in the motor plus a vertical thrust bearing, and two sodium hydrostatic bearings straddling the double-suction centrifugal impeller in the pump.
Date: January 1, 1981
Creator: Gupta, V.K. & Fair, C.E.
Partner: UNT Libraries Government Documents Department

Viscosity and density tables of sodium chloride solutions

Description: A file is presented containing tabulated data extracted from the scientific literature on the density and viscosity of aqueous sodium chloride solutions. Also included is a bibliography of the properties of aqueous sodium chloride solutions. (MHR)
Date: April 1, 1977
Creator: Fair, J.A. & Ozbek, H. (comps.)
Partner: UNT Libraries Government Documents Department

[News Clip: 1967 Texas State Fair Begins, Parade Rained Out]

Description: Video footage from the WBAP-TV station in Fort Worth, Texas, to accompany a news story about the 1967 Texas State Fair. The opening parade was canceled by heavy rains. Footage includes scenes of fair-goers dodging puddles and rainfall; other fair-goers attempt to enjoy the events despite the weather. Some shop for wares at various booths, others ride the Comet, the wooden roller-coaster that served as a fair landmark since its construction in 1947.
Date: September 25, 1967
Creator: WBAP-TV (Television station : Fort Worth, Tex.)
Partner: UNT Libraries Special Collections

Main-coolant-pump shaft-seal reliability investigation. Interim report

Description: This report contains the results of a survey of reactor coolant pump shaft seal reliability. The survey sample is representatively large (approx. = 27% of total US commercial plant population) and includes the three industry seal suppliers (Bingham-Williamette, Byron Jackson, and Westinghouse). Operationally incurred/induced problems and seal redesign parameters are identified. Failure hypotheses in the form of fault trees have been developed to describe the failure mechanisms. Recommendations are made for seal reliability improvement.
Date: September 1, 1982
Creator: Fair, C.E.; Marsi, J.A. & Greer, A.O.
Partner: UNT Libraries Government Documents Department

VISCOSITY OF AQUEOUS SODIUM CHLORIDE SOLUTIONS FROM 0 - 150o C

Description: A critical evaluation of data on the viscosity of aqueous sodium chloride solutions is presented. The literature was screened through October 1977, and a databank of evaluated data was established. Viscosity values were converted when necessary to units of centigrade, centipoise and molal concentration. The data were correlated with the aid of an empirical equation to facilitate interpolation and computer calculations. The result of the evaluation includes a table containing smoothed values for the viscosity of NaCl solutions to 150 C.
Date: October 1, 1977
Creator: Ozbek, H.; Fair, J.A. & Phillips, S.L.
Partner: UNT Libraries Government Documents Department

85,000-GPM, single-stage, single-suction LMFBR intermediate centrifugal pump

Description: The mechanical and hydraulic design features of the 85,000-gpm, single-stage, single-suction pump test article, which is designed to circulate liquid-sodium coolant in the intermediate heat-transport system of a Large-Scale Liquid Metal Fast Breeder Reactor (LS-LMFBR), are described. The design and analytical considerations used to satisfy the pump performance and operability requirements are presented. The validation of pump hydraulic performance using a hydraulic scale-model pump is discussed, as is the featute test for the mechanical-shaft seal system.
Date: January 1, 1983
Creator: Fair, C.E.; Cook, M.E. Huber, K.A. & Rohde, R.
Partner: UNT Libraries Government Documents Department

Engineered Natural Geosorbents for In Situ Immobilization of DNAPLs and Heavy Metals

Description: Extensive subsurface contamination by dense non-aqueous phase liquid (DNAPL) organic solvents and heavy metals is common place at many DOE facilities. Poor performances and excessive costs have made traditional technologies and approaches less than satisfactory for remediation of such sites. It is increasingly apparent that marginal improvements in conventional methods and approaches will not suffice for clean up of many contaminated DOE sites. Innovative approaches using new and/or existing technologies in more efficient and cost-effective ways are thus urgently required.
Date: December 1, 2006
Creator: Weber, Walter J.; Fair, Gordon M. & Boyce, Earnest
Partner: UNT Libraries Government Documents Department

Toxicity Studies of Aquatic Actinomycetes

Description: Since Actinomycetes have been isolated from finished public drinking water, it is believed that the organisms are unaffected by the chlorination and flocculation of water treatment plants and pass as spores through the filters into the general distribution system. For this reason it was deemed imperative to study the toxic effects of these organisms.
Date: August 1952
Creator: Fair, Helena Juengermann
Partner: UNT Libraries

Internal fluid flow management analysis for Clinch River Breeder Reactor Plant sodium pumps

Description: The Clinch River Breeder Reactor Plant (CRBRP) sodium pumps are currently being designed and the prototype unit is being fabricated. In the design of these large-scale pumps for elevated temperature Liquid Metal Fast Breeder Reactor (LMFBR) service, one major design consideration is the response of the critical parts to severe thermal transients. A detailed internal fluid flow distribution analysis has been performed using a computer code HAFMAT, which solves a network of fluid flow paths. The results of the analytical approach are then compared to the test data obtained on a half-scale pump model which was tested in water. The details are presented of pump internal hydraulic analysis, and test and evaluation of the half-scale model test results.
Date: December 1, 1978
Creator: Cho, S.M.; Zury, H.L.; Cook, M.E. & Fair, C.E.
Partner: UNT Libraries Government Documents Department

Technical databook for geothermal energy utilization

Description: A critical survey is made of selected basic data on those aqueous solutions needed to model geothermal energy utilization. The data are useful in the design and construction of power plants and for direct use. The result of the survey is given as a current status of data. More emphasis is placed on the viscosity, thermal conductivity and density of sodium chloride solutions up to 350/sup 0/C and 50 MPa. An ideal data book for geothermal energy is described.
Date: June 1, 1981
Creator: Phillips, S.L.; Igbene, A.; Fair, J.A.; Ozbek, H. & Tavana, M.
Partner: UNT Libraries Government Documents Department

Laser smoothing of sub-micron grooves in hydroxyl-rich fused silica

Description: Nano- to micrometer-sized surface defects on UV-grade fused silica surfaces are known to be effectively smoothed through the use of high-temperature localized CO{sub 2} laser heating, thereby enhancing optical properties. However, the details of the mass transport and the effect of hydroxyl content on the laser smoothing of defective silica at submicron length scales is still not completely understood. In this study, we examine the morphological evolution of sub-micron, dry-etched periodic surface structures on type II and type III SiO{sub 2} substrates under 10.6 {micro}m CO{sub 2} laser irradiation using atomic force microscopy (AFM). In-situ thermal imaging was used to map the transient temperature field across the heated region, allowing assessment of the T-dependent mass transport mechanisms under different laser-heating conditions. Computational fluid dynamics simulations correlated well with experimental results, and showed that for large effective capillary numbers (N{sub c} > 2), surface diffusion is negligible and smoothing is dictated by capillary action, despite the relatively small spatial scales studied here. Extracted viscosity values over 1700-2000K were higher than the predicted bulk values, but were consistent with the surface depletion of OH groups, which was confirmed using confocal Raman microscopy.
Date: October 30, 2009
Creator: Shen, N; Matthews, M J; Fair, J E; Britten, J A; Nguyen, H T; Cooke, D et al.
Partner: UNT Libraries Government Documents Department

In situ x-ray diffraction study of CoSi{sub 2} formation during annealing of a Co/Ti bilayer on Si*(100)

Description: X-ray diffraction (XRD) was performed in situ during annealing of a Co/Ti/Si(001) multilayer, which produced an epitaxial CoSi{sub 2} layer. The results indicate that the Ti layer did. not stay intact during the reaction, and thus could not act like a membrane, moderating Co/Si interdiffusion. A strongly textured metastable phase (M) formed prior to CoSi{sub 2} nucleation. This intermediary reaction product was unobservable upon completion of the anneal. We report that nucleation and growth of CoSi{sub 2} on Si(100) took place in the presence of M, a new Co-Ti-Si-(O) phase, located at the metal/Si interface. M might play an important role in the perfection of the silicide. Ti and Co metals intermix already below 300{degrees}C, and there was evidence that metallic Ti precipitated at the surface, commencing at 550{degrees}C.
Date: June 1, 1995
Creator: Selinder, T.I.; Roberts, T.A.; Miller, D.J.; Beno, M.A.; Knapp, G.S.; Gray, K.E. et al.
Partner: UNT Libraries Government Documents Department

Superconductivity for Large Scale Wind Turbines

Description: A conceptual design has been completed for a 10MW superconducting direct drive wind turbine generator employing low temperature superconductors for the field winding. Key technology building blocks from the GE Wind and GE Healthcare businesses have been transferred across to the design of this concept machine. Wherever possible, conventional technology and production techniques have been used in order to support the case for commercialization of such a machine. Appendices A and B provide further details of the layout of the machine and the complete specification table for the concept design. Phase 1 of the program has allowed us to understand the trade-offs between the various sub-systems of such a generator and its integration with a wind turbine. A Failure Modes and Effects Analysis (FMEA) and a Technology Readiness Level (TRL) analysis have been completed resulting in the identification of high risk components within the design. The design has been analyzed from a commercial and economic point of view and Cost of Energy (COE) calculations have been carried out with the potential to reduce COE by up to 18% when compared with a permanent magnet direct drive 5MW baseline machine, resulting in a potential COE of 0.075 $/kWh. Finally, a top-level commercialization plan has been proposed to enable this technology to be transitioned to full volume production. The main body of this report will present the design processes employed and the main findings and conclusions.
Date: October 12, 2012
Creator: Fair, R.; Stautner, W.; Douglass, M.; Rajput-Ghoshal, R.; Moscinski, M.; Riley, P. et al.
Partner: UNT Libraries Government Documents Department