5 Matching Results

Search Results

Advanced search parameters have been applied.

Incineration of contaminated organic solvents in a fluidized-bed calciner

Description: The reprocessing of expended reactor fuels at the Idaho Chemical Processing Plant (ICPP) generates contaminated organic solvents. An evaluation of potential management alternatives shows that several are suitable for management of contaminated solvents containing tri-butyl phosphate (TBP): the solvent could be burned in a commercially-available burner which absorbs the phosphorus on a fluidized-bed of limestone leaving a solid product for burial; the solvent could be burned in a small fluidized-bed calciner which solidifies non-radioactive feed by in-bed combustion of the contaminated solvent. The fluidized-bed absorbs the phosphate forming a solid product for burial; the solvents could be solidified with a gel or sorbant for burial if the reprocessing system were modified to reduce the solvent volume; and the contaminated solvent could be burned in an existing fluidized-bed calciner designed for solidifying high-level aqueous wastes. Burning the solvent in the existing calciner was selected for process verification because it provides an existing burner, off-gas system, and solids transfer and storage system. No additional wastes are generated. A set of four pilot-plant tests verified the absence of adverse effects from the phosphorus in the fuel when calcining simulated ICPP aqueous wastes. Essentially all of the phosphorus remained in the calcined solids with only a neglegible quantity remaining in the scrubbed off-gas. Combustion efficiency was high (93 to 96%). There were no observable adverse effects on solids in the scrubbing system, corrosion rates, or solids flowability (for retrieval). Conclusions of general applicability are: alternative technologies are available for disposal of contaminated solvents, and the use of an existing fuel-using facility, e.g., calciner or incinerator - designed for contaminated wastes will usually be cost effective.
Date: January 1, 1980
Creator: Schindler, R.E.
Partner: UNT Libraries Government Documents Department

Physical property parameter set for modeling ICPP aqueous wastes with ASPEN electrolyte NRTL model

Description: The aqueous waste evaporators at the Idaho Chemical Processing Plant (ICPP) are being modeled using ASPEN software. The ASPEN software calculates chemical and vapor-liquid equilibria with activity coefficients calculated using the electrolyte Non-Random Two Liquid (NRTL) model for local excess Gibbs free energies of interactions between ions and molecules in solution. The use of the electrolyte NRTL model requires the determination of empirical parameters for the excess Gibbs free energies of the interactions between species in solution. This report covers the development of a set parameters, from literature data, for the use of the electrolyte NRTL model with the major solutes in the ICPP aqueous wastes.
Date: September 1, 1996
Creator: Schindler, R.E.
Partner: UNT Libraries Government Documents Department

Emissions model of waste treatment operations at the Idaho Chemical Processing Plant

Description: An integrated model of the waste treatment systems at the Idaho Chemical Processing Plant (ICPP) was developed using a commercially-available process simulation software (ASPEN Plus) to calculate atmospheric emissions of hazardous chemicals for use in an application for an environmental permit to operate (PTO). The processes covered by the model are the Process Equipment Waste evaporator, High Level Liquid Waste evaporator, New Waste Calcining Facility and Liquid Effluent Treatment and Disposal facility. The processes are described along with the model and its assumptions. The model calculates emissions of NO{sub x}, CO, volatile acids, hazardous metals, and organic chemicals. Some calculated relative emissions are summarized and insights on building simulations are discussed.
Date: March 1, 1995
Creator: Schindler, R.E.
Partner: UNT Libraries Government Documents Department

Screening Level Risk Assessment for the New Waste Calcining Facility

Description: This screening level risk assessment evaluates potential adverse human health and ecological impacts resulting from continued operations of the calciner at the New Waste Calcining Facility (NWCF) at the Idaho Nuclear Technology and Engineering Center (INTEC), Idaho National Engineering and Environmental Laboratory (INEEL). The assessment was conducted in accordance with the Environmental Protection Agency (EPA) report, Guidance for Performing Screening Level Risk Analyses at Combustion Facilities Burning Hazardous Waste. This screening guidance is intended to give a conservative estimate of the potential risks to determine whether a more refined assessment is warranted. The NWCF uses a fluidized-bed combustor to solidify (calcine) liquid radioactive mixed waste from the INTEC Tank Farm facility. Calciner off volatilized metal species, trace organic compounds, and low-levels of radionuclides. Conservative stack emission rates were calculated based on maximum waste solution feed samples, conservative assumptions for off gas partitioning of metals and organics, stack gas sampling for mercury, and conservative measurements of contaminant removal (decontamination factors) in the off gas treatment system. Stack emissions were modeled using the ISC3 air dispersion model to predict maximum particulate and vapor air concentrations and ground deposition rates. Results demonstrate that NWCF emissions calculated from best-available process knowledge would result in maximum onsite and offsite health and ecological impacts that are less then EPA-established criteria for operation of a combustion facility.
Date: May 1, 1999
Creator: Abbott, M. L.; Keck, K. N.; Schindler, R. E.; VanHorn, R. L.; Hampton, N. L. & Heiser, M. B.
Partner: UNT Libraries Government Documents Department