10 Matching Results

Search Results

Advanced search parameters have been applied.

Test specification for decant pump and winch assembly. Revision 2

Description: This specification provides the requirements for testing of the vertical turbine decant pump including the floating suction with load sensing winch control, instrumentation and the associated PLC/PC control system. All assembly necessary for testing including piping, temporary wiring, etc., shall be performed by the Seller. All referenced figures are at the back of this document. The testing consists of performance testing, winch testing and calibration, instrumentation verification testing and run-in testing of the pump. Testing shall be done in the presence and under the direction of the Buyer in accordance with this procedure.
Date: February 22, 1995
Creator: Staehr, T.W.
Partner: UNT Libraries Government Documents Department

Suspended Solids Profiler Shop Test Report

Description: The Suspended Solids Profiler (SSP) Instrument is planned to be installed in the AZ-101 tank to measure suspended solids concentrations during mixer pump testing. The SSP sensor uses a reflectance measurement principle to determine the suspended solids concentrations. The purpose of this test is to provide a documented means of verifying that the functional components of the SSP operate properly.
Date: January 19, 2000
Creator: STAEHR, T.W.
Partner: UNT Libraries Government Documents Department

Mixer pump test plan for double shell tank AZ-101

Description: Mixer pump systems have been chosen as the method for retrieval of tank wastes contained in double shell tanks at Hanford. This document describes the plan for testing and demonstrating the ability of two 300 hp mixer pumps to mobilize waste in tank AZ-101. The mixer pumps, equipment and instrumentation to monitor the test were installed by Project W-151.
Date: May 12, 1999
Creator: STAEHR, T.W.
Partner: UNT Libraries Government Documents Department

Ultrasonic interface level analyzer shop test procedure

Description: The Royce Instrument Corporation Model 2511 Interface Level Analyzer (URSILLA) system uses an ultrasonic ranging technique (SONAR) to measure sludge depths in holding tanks. Three URSILLA instrument assemblies provided by the W-151 project are planned to be used during mixer pump testing to provide data for determining sludge mobilization effectiveness of the mixer pumps and sludge settling rates. The purpose of this test is to provide a documented means of verifying that the functional components of the three URSILLA instruments operate properly. Successful completion of this Shop Test Procedure (STP) is a prerequisite for installation in the AZ-101 tank. The objective of the test is to verify the operation of the URSILLA instruments and to verify data collection using a stand alone software program.
Date: May 24, 1999
Creator: STAEHR, T.W.
Partner: UNT Libraries Government Documents Department

High Level Waste (HLW) Feed Process Control Strategy

Description: The primary purpose of this document is to describe the overall process control strategy for monitoring and controlling the functions associated with the Phase 1B high-level waste feed delivery. This document provides the basis for process monitoring and control functions and requirements needed throughput the double-shell tank system during Phase 1 high-level waste feed delivery. This document is intended to be used by (1) the developers of the future Process Control Plan and (2) the developers of the monitoring and control system.
Date: June 14, 2000
Creator: STAEHR, T.W.
Partner: UNT Libraries Government Documents Department

Low Activity Waste Feed Process Control Strategy

Description: The primary purpose of this document is to describe the overall process control strategy for monitoring and controlling the functions associated with the Phase 1B high-level waste feed delivery. This document provides the basis for process monitoring and control functions and requirements needed throughput the double-shell tank system during Phase 1 high-level waste feed delivery. This document is intended to be used by (1) the developers of the future Process Control Plan and (2) the developers of the monitoring and control system.
Date: June 14, 2000
Creator: STAEHR, T.W.
Partner: UNT Libraries Government Documents Department

Decant pump assembly and controls qualification testing - test report

Description: This report summarizes the results of the qualification testing of the supernate decant pump and controls system to be used for in-tank sludge washing in aging waste tank AZ-101. The test was successful and all components are qualified for installation and use in the tank.
Date: May 2, 1996
Creator: Staehr, T.W., Westinghouse Hanford
Partner: UNT Libraries Government Documents Department

Hanford tank initiative test facility site selection study

Description: The Hanford Tanks Initiative (HTI) project is developing equipment for the removal of hard heel waste from the Hanford Site underground single-shell waste storage tanks. The HTI equipment will initially be installed in the 241-C-106 tank where its operation will be demonstrated. This study evaluates existing Hanford Site facilities and other sites for functional testing of the HTI equipment before it is installed into the 241-C-106 tank.
Date: April 3, 1997
Creator: Staehr, T.W.
Partner: UNT Libraries Government Documents Department

Mixer pump test plan for double shell tank AZ-101

Description: Westinghouse Hanford Company has undertaken the task to develop and demonstrate a method of retrieval for double-shell tank (DST)waste. Mixer pumps were chosen as the planned method of retrieval for the DSTs, based on engineering technology studies,past experience with hydraulic sluicing at the Hanford Site, and experience with mixer pumps at the Westinghouse Savannah River Site. This document outlines a test plan to demonstrate the ability of two 300 hp mixer pumps installed in the AZ-101 tank to mobilize waste.
Date: June 1, 1996
Creator: Symons, G.A. & Staehr, T.W., Westinghouse Hanford
Partner: UNT Libraries Government Documents Department