28 Matching Results

Search Results

Advanced search parameters have been applied.

Design, Construction and Test of Cryogen-Free HTS Coil Structure

Description: This paper will describe design, construction and test results of a cryo-mechanical structure to study coils made with the second generation High Temperature Superconductor (HTS) for the Facility for Rare Isotope Beams (FRIB). A magnet comprised of HTS coils mounted in a vacuum vessel and conduction-cooled with Gifford-McMahon cycle cryocoolers is used to develop and refine design and construction techniques. The study of these techniques and their effect on operations provides a better understanding of the use of cryogen free magnets in future accelerator projects. A cryogen-free, superconducting HTS magnet possesses certain operational advantages over cryogenically cooled, low temperature superconducting magnets.
Date: March 28, 2011
Creator: Hocker, H.; Anerella, M.; Gupta, R.; Plate, S.; Sampson, W.; Schmalzle, J. et al.
Partner: UNT Libraries Government Documents Department

Alternative Mechanical Structure for LARP Nb3Sn Quadrupoles

Description: An alternative structure for the 120 mm Nb{sub 3}Sn quadrupole magnet presently under development for use in the upgrade for LHC at CERN is presented. The goals of this structure are to build on the existing technology developed in LARP with the LQ and HQ series magnets and to further optimize the features required for operation in the accelerator. These features include mechanical alignment needed for field quality and provisions for cold mass cooling with 1.9 K helium in a helium pressure vessel. The structure will also optimize coil azimuthal and axial pre-load for high gradient operation, and will incorporate features intended to improve manufacturability, thereby improving reliability and reducing cost.
Date: August 1, 2010
Creator: Anerella, M.; Cozzolino, J.; Ambrosio, G.; Caspi, S.; Felice, H.; Kovach, P. et al.
Partner: UNT Libraries Government Documents Department

Open-Midplane Dipoles for a Muon Collider

Description: For a muon collider with copious decay particles in the plane of the storage ring, open-midplane dipoles (OMD) may be preferable to tungsten-shielded cosine-theta dipoles of large aperture. The OMD should have its midplane completely free of material, so as to dodge the radiation from decaying muons. Analysis funded by a Phase I SBIR suggests that a field of 10-20 T should be feasible, with homogeneity of 1 x 10{sup -4} and energy deposition low enough for conduction cooling to 4.2 K helium. If funded, a Phase II SBIR would refine the analysis and build and test a proof-of-principle magnet. A Phase I SBIR has advanced the feasibility of open-midplane dipoles for the storage ring of a muon collider. A proposed Phase II SBIR would refine these predictions of stresses, deformations, field quality and energy deposition. Design optimizations would continue, leading to the fabrication and test, for the first time, of a proof-of-principle dipole of truly open-midplane design.
Date: March 28, 2011
Creator: Weggel, R.; Gupta, R. & Kolonko, J., Scanlan, R., Cline, D., Ding, X., Anerella, M., Kirk, H., Palmer, B., Schmalzle, J.
Partner: UNT Libraries Government Documents Department

MAGNETS FOR A MUON STORAGE RING.

Description: We present a new racetrack coil magnet design, with an open midplane gap, that keeps decay particles in a neutrino factory muon storage ring from directly hitting superconducting coils. The structure is very compact because coil ends overlap middle sections top and bottom for skew focusing optics. A large racetrack coil bend radius allows ''react and wind'' magnet technology to be used for brittle Nb{sub 3}Sn superconductors. We describe two versions: Design-A, a magnet presently under construction and Design-B, a further iterated concept that achieves the higher magnetic field quality specified in the neutrino factory feasibility Study-II report. For Design-B reverse polarity and identical end design of consecutive long and short coils offers theoretically perfect magnet end field error cancellation. These designs avoid the dead space penalty from coil ends and interconnect regions (a large fraction in machines with short length but large aperture magnets) and provide continuous bending or focusing without interruption. The coil support structure and cryostat are carefully optimized.
Date: June 18, 2002
Creator: PARKER, B.; ANERELLA, M.; GHOSH, A.; GUPTA, R.; HARRISON, M.; SCHMALZLE, J. et al.
Partner: UNT Libraries Government Documents Department

Field Quality Analysis as a Tool to Monitor Magnet Production

Description: Field harmonics offer a powerful tool to examine the mechanical structure of accelerator magnets. A large deviation from the nominal values suggests a mechanical defect. Magnets with such defects are likely to have a poor quench performance. Similarly, a trend suggests a wear in tooling or a gradual change in the magnet assem-bly or in the size of a component. This paper presents the use of the field quality as a tool to monitor the magnet production of the Relativistic Heavy Ion Collider (RHIC). Several examples are briefly described. Field quality analysis can also rule out a suspected geometric error if it can not be supported by the symmetry and the magnitude of the measured harmonics.
Date: October 18, 1997
Creator: Gupta, R.; Anerella, M.; Cozzolino, J.; Fisher, D.; Ghosh, A.; Jain, A. et al.
Partner: UNT Libraries Government Documents Department

Instrumentation and Quench Protection for LARP Nb3Sn Magnets

Description: The US LHC Accelerator Research Program (LARP) is developing Nb{sub 3}Sn prototype quadrupoles for the LHC interaction region upgrades. Several magnets have been tested within this program and understanding of their behavior and performance is a primary goal. The instrumentation is consequently a key consideration, as is protection of the magnet during quenches. In all LARP magnets, the flexible circuits traces combine the instrumentation and the protection heaters. Their fabrication relies on printed circuit technology based on a laminate made of a 45-micron thick kapton sheet and a 25-micron thick foil of stainless steel. This paper reviews the protection heaters designs used in the TQ (Technology Quadrupole) and LR (Long Racetrack) series as well as the one used in LBNL HD2a high field dipole and presents the design of the traces for the Long Quadrupole (LQ), addressing challenges associated with the stored energy and the length of the magnet.
Date: August 17, 2008
Creator: Felice, H.; Ambrosio, G.; Chlachidize, G.; Ferracin, P.; Hafalia, R.; Hannaford, R. C. et al.
Partner: UNT Libraries Government Documents Department

RHIC D0 INSERTION DIPOLE DESIGN ITERATIONS DURING PRODUCTION.

Description: Iterations to the cross section of the Relativistic Heavy Ion Collider (RHIC) D0 Insertion Dipole magnets were made during the production. This was included as part of the production plan because no R&D or pre-production magnets were built prior to the start of production. The first magnet produced had the desired coil pre-stress and low field harmonics in the body of the magnet and is therefore being used in the RHIC Machine. On the first eight magnets, iterations were carried out to minimize the iron saturation and to compensate for the end harmonics. This paper will discuss the details of the iterations made, the obstacles encountered, and the results obtained. Also included will be a brief summary of the magnet design and performance.
Date: May 12, 1997
Creator: SCHMALZLE,J.; ANERELLA,M.; GANETIS,G.; GHOSH,A.; GUPTA,R.; JAIN,A. et al.
Partner: UNT Libraries Government Documents Department

SUPERCONDUCTING DIPOLE MAGNETS FOR THE LHC INSERTION REGIONS

Description: Dipole bending magnets are required to change the horizontal separation of the two beams in the LHC. In Intersection Regions (IR) 1, 2, 5, and 8, the beams are brought into collision for the experiments located there. In IR4, the separation of the beams is increased to accommodate the machine's particle acceleration hardware. As part of the US contribution to the LHC Project, BNL is building the required superconducting magnets. Designs have been developed featuring a single aperture cold mass in a single cryostat, two single aperture cold masses in a single cryostat, and a dual aperture cold mass in a single cryostat. All configurations feature the 80 mm diameter, 10 m long superconducting coil design used in the main bending magnets of the Relativistic Heavy Ion Collider recently completed at Brookhaven. The magnets for the LHC, to be built at Brookhaven, are described and results from the program to build two dual aperture prototypes are presented.
Date: June 26, 2000
Creator: WILLEN,E.; ANERELLA,M.; COZZOLINO,J.; GANETIS,G.; GHOSH,A.; GUPTA,R. et al.
Partner: UNT Libraries Government Documents Department

INITIAL TEST OF A FAST RAMPED SUPERCONDUCTING MODEL DIPOLE FOR GSIS PROPOSED SIS200 ACCELERATOR.

Description: Gesellschaft fur Schwerionenforschung (GSI) has proposed a large expansion of the existing facility in Darmstadt, Germany. The proposal includes an accelerator, SIS200, with rigidity of 200 Tam that utilizes 4 T superconducting dipoles ramped at 1 T/s. An R&D program including both the superconductor and the magnet is directed at achieving the desired ramp rate with minimal energy loss. The RHIC arc dipoles, with 8 cm aperture, possess adequate aperture and field strength but are ramped at only 1/20 of the desired rate. However, for reasons of speed and economy, the RHIC dipole is being used as the basis for this work. The superconductor R&D has progressed far enough to permit the manufacture of an initial cable with satisfactory properties. This cable has been used in the construction of a I m model magnet, appropriately modified from the RHIC design. The magnet has been tested successfully at 2 T/s to 4.38 T.
Date: May 12, 2003
Creator: WANDERER,P.; ANERELLA,M.; GANETIS,G.; GHOSH,A.; JOSHI,P.; MARONE,A. et al.
Partner: UNT Libraries Government Documents Department

Warm Magnetic Field Measurements of LARP HQ Magnet

Description: The US-LHC Accelerator Research Program is developing and testing a high-gradient quadrupole (HQ) magnet, aiming at demonstrating the feasibility of Nb{sub 3}Sn technologies for the LHC luminosity upgrade. The 1 m long HQ magnet has a 120 mm bore with a conductor-limited gradient of 219 T/m at 1.9 K and a peak field of 15 T. HQ includes accelerator features such as alignment and field quality. Here we present the magnetic measurement results obtained at LBNL with a constant current of 30 A. A 100 mm long circuit-board rotating coil developed by FNAL was used and the induced voltage and flux increment were acquired. The measured b{sub 6} ranges from 0.3 to 0.5 units in the magnet straight section at a reference radius of 21.55 mm. The data reduced from the numerical integration of the raw voltage agree with those from the fast digital integrators.
Date: March 28, 2011
Creator: Caspi, S; Cheng, D; Deitderich, D; Felice, H; Ferracin, P; Hafalia, R et al.
Partner: UNT Libraries Government Documents Department

Assembly and Test of a Support Structure for 3.5 m Long Nb3Sn Racetrack Coils.

Description: The LHC Accelerator Research Program (LARP) is currently developing 4 m long Nb{sub 3}Sn quadrupole magnets for a possible upgrade of the LHC Interaction Regions (IR). In order to provide a reliable test bed for the fabrication and test of long Nb{sub 3}Sn coils, LARP has started the development of the long racetrack magnet LRS01. The magnet is composed of two 3.6 m long racetrack coils contained in a support structure based on an aluminum shell pre-tensioned with water-pressurized bladders and interference keys. For the phase-one test of the assembly procedure and loading operation, the structure was pre-stressed at room temperature and cooled down to 77 K with instrumented, solid aluminum 'dummy coils'. Mechanical behavior and stress homogeneity were monitored with strain gauges mounted on the shell and the dummy coils. The dummy coils were replaced with reacted and impregnated Nb{sub 3}Sn coils in a second assembly procedure, followed by cool-down to 4.5 K and powered magnet test. This paper reports on the assembly and loading procedures of the support structure as well as the comparison between strain gauge data and 3D model predictions.
Date: August 27, 2007
Creator: Ferracin,P.; Ambrosio, G.; Anerella, M.; Caspi, S.; Cheng, D.W.; Felice, H. et al.
Partner: UNT Libraries Government Documents Department

LARP Long Nb3Sn Racetrack Coil Program

Description: Development of high-performance Nb{sub 3}Sn quadrupoles is one of the major goals of the LHC Accelerator Research Program (LARP). As part of this program, long racetrack magnets are being made in order to check that the change in coil length that takes place during reaction is correctly accounted for in the quadrupole design and to check for length effects in implementing the 'shell' method of coil support. To check the racetrack magnet manufacturing plan, a short racetrack magnet is being made. This magnet will be the first to use restack-rod process Nb{sub 3}Sn, making it a 'long sample' test vehicle for this new material. The paper reports the reaction and characterization of the Nb{sub 3}Sn, and construction features and test results from the short racetrack magnet. The paper also reports on the status of the construction of the first long racetrack magnet.
Date: June 1, 2007
Creator: Wanderer, P.; Ambrosio, G.; Anerella, M.; Barzi, E.; Bossert, R.; Cheng, D. et al.
Partner: UNT Libraries Government Documents Department

Design and Fabrication of a Supporting Structure for 3.6m Long Nb3Sn Racetrack Coils

Description: As part of the LHC Accelerator Research Program (LARP), three US national laboratories (BNL, FNAL, and LBNL) are currently engaged in the development of superconducting magnets for the LHC Interaction Regions (IR) beyond the current design. As a first step towards the development of long Nb{sub 3}Sn quadrupole magnets, a 3.6 m long structure, based on the LBNL Subscale Common-Coil Magnet design, will be fabricated, assembled, and tested with aluminum-plate 'dummy coils'. The structure features an aluminum shell pre-tensioned over iron yokes using pressurized bladders and locking keys (bladder and key technology). Pre-load homogeneity and mechanical responses are monitored with pressure sensitive films and strain gauges mounted on the aluminum shell and the dummy coils. The details of the design and fabrication are presented and discussed, and the expected mechanical behavior is analyzed with finite element models.
Date: June 1, 2007
Creator: Ambrosio, G.; Anerella, M.; Barzi, E.; Caspi, Shlomo; Cheng, Daniel; Dietderich, Daniel et al.
Partner: UNT Libraries Government Documents Department

Assembly and Test of a Support Structure for 3.6 m Long Nb3Sn Racetrack Coils

Description: The LHC Accelerator Research Program (LARP) is currently developing 4 m long Nb{sub 3}Sn quadrupole magnets for a possible upgrade of the LHC Interaction Regions (IR). In order to provide a reliable test bed for the fabrication and test of long Nb{sub 3}Sn coils, LARP has started the development of the long racetrack magnet LRS01. The magnet is composed of two 3.6 m long racetrack coils contained in a support structure based on an aluminum shell pre-tensioned with water-pressurized bladders and interference keys. For the phase-one test of the assembly procedure and loading operation, the structure was pre-stressed at room temperature and cooled down to 77 K with instrumented, solid aluminum 'dummy coils'. Mechanical behavior and stress homogeneity were monitored with strain gauges mounted on the shell and the dummy coils. The dummy coils were replaced with reacted and impregnated Nb{sub 3}Sn coils in a second assembly procedure, followed by cool-down to 4.5 K and powered magnet test. This paper report on the assembly and loading procedures of the support structure as well as the comparison between strain gauge data and 3D model predictions.
Date: June 1, 2008
Creator: Ambrosio, G.; Anerella, M.; Caspi, S.; Cheng, D.W.; Felice, H.; Hafalia, A.R. et al.
Partner: UNT Libraries Government Documents Department

Summary of HQ01e magnetic measurements

Description: The magnetic measurements of HQ01e, a 1 m long LHC Accelerator Research Program (LARP) high-gradient quadrupole model, were performed at 4.4 K and above 40 K at the magnet test facility of LBNL in July 2011. The 120 mm aperture cos2θ Nb{sub 3}Sn magnet was designed with accelerator magnet features including alignment and field quality. Conductor-limited gradient was 195 T/m at 4.4 K. During the measurement, a ramp rate of 10 A/s was used and measurements at the nominal current of 14.2 kA (82% of short-sample limit with a gradient of 160 T/m) were performed using the 250 mm long printed-circuit board rotating probe developed by FNAL. At 14.2 kA, 2.7 units of b{sub 6} and 0.7 units of b{sub 10} were measured. Large persistent current contribution and strong dynamic effects were observed. We analyzed the allowed and non-allowed harmonics obtained during the measurements above 40 K and at the nominal current. Significant change of the skew sextupole occurred between 50 K and 95 K. The allowed multipole and the low-order non-allowed multipoles at the straight section were explained through the rigid displacement of coil blocks with an amplitude less than 100 μm. We also attempted to correlate the coil asymmetry (a{sub 3} and b{sub 3}) with the measured coil pole azimuthal strain. The dynamic multipole measured at the magnetic straight section varied linearly with the ramp rate of magnet current ranging from 10 A/s to 60 A/s. It was attributed to the inter-strand coupling currents with low crossover resistance. The crossover resistance of the cables at the inner layer of the magnet was estimated to range between 0.2 μΩ to 0.7 μΩ.
Date: November 28, 2011
Creator: Wang, X.; Caspi, S.; Cheng, D. W.; Dietderich, D. R.; Felice, H.; Ferracin, P. et al.
Partner: UNT Libraries Government Documents Department

Assembly and Loading of LQS01, a Shell-Based 3.7 m Long Nb3Sn Quadrupole Magnet for LARP

Description: The LHC Accelerator Research Program (LARP) has been engaged in the fabrication of the 3.7 m long quadrupole magnet LQS01 in order to demonstrate that Nb{sub 3}Sn magnets are a viable option for future LHC Luminosity upgrades. The LQS01 design, a scale-up of the 1 m long Technology Quadrupole TQS, includes four 3.4 m long cos(theta) coils contained in a support structure based on four 1 m long aluminum shells pre-tensioned with water-pressurized bladders (shell-type structure). In order to verify assembly procedures and loading operations, the structure was pre-stressed around solid aluminum 'dummy coils' and cooled-down to 77 K. Mechanical behavior and stress variations were monitored with strain gauges mounted on the structure and on the dummy coils. The dummy coils were then replaced with Nb{sub 3}Sn coils in a second assembly and loading procedure, in preparation for the cool-down and test. This paper reports on the cool-down test with dummy coils and on the assembly and loading of LQS01, with a comparison between 3D finite element model predictions and strain gauge data.
Date: October 19, 2009
Creator: Ferracin, P.; Ambrosio, G.; Anerella, M.; Bingham, B.; Bossert, R.; Caspi, S. et al.
Partner: UNT Libraries Government Documents Department

ASSEMBLY AND TEST OF A 120 MM BORE 15 T NB3SN QUADRUPOLE FOR THE LHC UPGRADE

Description: In support of the Large Hadron Collider (LHC) luminosity upgrade, the US LHC Accelerator Research Program (LARP) has been developing a 1-meter long, 120 mm bore Nb{sub 3}Sn IR quadrupole magnet (HQ). With a design short sample gradient of 219 T/m at 1.9 K and a peak field approaching 15 T, one of the main challenges of this magnet is to provide appropriate mechanical support to the coils. Compared to the previous LARP Technology Quadrupole and Long Quadrupole magnets, the purpose of HQ is also to demonstrate accelerator quality features such as alignment and cooling. So far, 8 HQ coils have been fabricated and 4 of them have been assembled and tested in HQ01a. This paper presents the mechanical assembly and test results of HQ01a.
Date: May 23, 2010
Creator: Felice, H.; Caspi, S.; Cheng, D.; Dietderich, D.; Ferracin, P.; Hafalia, R. et al.
Partner: UNT Libraries Government Documents Department

Fabrication and Test of a 3.7 m Long Support Structure for the LARP Nb3Sn Quadrupole Magnet LQS01

Description: The 3.7 m long quadrupole magnet LQS01 represents a major step of the US LHC Accelerator Research Program (LARP) towards the development of long Nb{sub 3}Sn accelerator quadrupole magnets for a LHC Luminosity upgrade. The magnet support structure is a scale up of the 1 m long Technology Quadrupole TQS design with some modifications suggested by TQS model test results. It includes an aluminum shell pre-tensioned over iron yokes using pressurized bladders and locking keys (bladder and key technology). The axial support is provided by two stainless steel end plates compressed against the coil ends by four stainless steel rods. The structure, instrumented with strain gauges, has been fabricated and assembled around four aluminum 'dummy coils' to determine pre-load homogeneity and mechanical characteristics during cool-down. After presenting the main magnetic and mechanical parameters of LQS01, we report in this paper on the design, assembly, and test of the support structure, with a comparison between strain gauges data and 3D finite element model results.
Date: August 17, 2008
Creator: Ferracin, P.; Ambrosio, G.; Anerella, M.; Bingham, B.; Bossert, R.; Caspi, S. et al.
Partner: UNT Libraries Government Documents Department

Design and Construction of a 15 T, 120 mm Bore Ir Quadrupole Magnet for LARP

Description: Pushing accelerator magnets beyond 10 T holds a promise of future upgrades to machines like the Large Hadron Collider (LHC) at CERN. Nb{sub 3}Sn conductor is at the present time the only practical superconductor capable of generating fields beyond 10 T. In support of the LHC Phase-II upgrade, the US LHC Accelerator Research Program (LARP) is developing a large bore (120 mm) IR quadrupole (HQ) capable of reaching 15 T at its conductor peak field and a peak gradient of 219 T/m at 1.9 K. While exploring the magnet performance limits in terms of gradient, forces and stresses the 1 m long two-layer coil will demonstrate additional features such as alignment and accelerator field quality. In this paper we summarize the design and report on the magnet construction progress.
Date: May 4, 2009
Creator: Caspi, S.; Cheng, D.; Dietderich, D.; Felice, H.; Ferracin, P.; Hafalia, R. et al.
Partner: UNT Libraries Government Documents Department

Mechanical Performance of the LARP Nb{sub 3}Sn Quadrupole Magnet LQS01

Description: As part of the effort towards the development of Nb{sub 3}Sn magnets for future LHC luminosity upgrades, the LHC Accelerator Research Program (LARP) has fabricated and tested the quadrupole magnet LQS01. The magnet implements 3.4 m long Nb{sub 3}Sn coils contained in a support structure characterized by an external aluminum shell segmented in four sections. The room temperature pre-load of the structure is obtained by shimming load keys through bladders, pressurized during the loading operations and removed before cool-down. Temperature compensated strain gauges, mounted on structure components and coil poles, monitor the magnet's mechanical behavior during assembly, cool-down and excitation. During the first test, LQS01 reached the target gradient of 200 T/m; the gauge data indicated that the aluminum shell was pre-tensioned to the target value estimated by numerical models, but a lack of pre-load was measured in the coil inner layer during ramping. As a result, the test was interrupted and the magnet disassembled and inspected. A second test (LQS01b) was then carried out following a re-loading of the magnet. The paper reports on the strain gauge results of the first test and the analysis performed to identify corrective actions to improve the coil pre-stress distribution. The mechanical performance of the magnet during the second cool-down and test is then presented and discussed.
Date: August 1, 2010
Creator: Ferracin, P.; Ambrosio, G.; Anerella, M.; Bingham, B.; Bossert, R.; Caspi, S. et al.
Partner: UNT Libraries Government Documents Department

Test Results of 15 T Nb{sub 3}Sn Quadrupole Magnet HQ01 with a 120 mm Bore for the LHC Luminosity Upgrade

Description: In support of the luminosity upgrade of the Large Hadron Collider (LHC), the US LHC Accelerator Research Program (LARP) has been developing a 1-meter long, 120 mm bore Nb3 Sn IR quadrupole magnet (HQ). With a short sample gradient of 219 T/m at 1.9 K and a conductor peak field of 15 T, the magnet will operate under higher forces and stored-energy levels than that of any previous LARP magnet models. In addition, HQ has been designed to incorporate accelerator quality features such as precise coil alignment and adequate cooling. The first 6 coils (out of the 8 fabricated so far) have been assembled and used in two separate tests-HQ01a and HQ01b. This paper presents design parameters, summary of the assemblies, the mechanical behavior as well as the performance of HQ01a and HQ01b.
Date: August 1, 2010
Creator: Caspi, S.; Ambrosio, G.; Anerella, M.; Barzi, E.; Bingham, B.; Bossert, R. et al.
Partner: UNT Libraries Government Documents Department

Field Quality of the First LARP Nb{sub 3}Sn 3.7 m-Long Quadrupole Model of LQ Series

Description: The US-LHC accelerator research program (LARP) built and tested the first 3.7-m long Nb{sub 3}Sn quadrupole model of LQ series with a 90 mm bore diameter and a target field gradient of 200 T/m. The LQ series, developed in collaboration among FNAL, LBNL and BNL, is a scale up of the previously tested 1-m long technology quadrupoles of TQ series based on similar coils and two different mechanical structures (shell-based TQS and collar-based TQC), with a primary goal of demonstrating the Nb{sub 3}Sn accelerator magnet technology for the luminosity upgrade of LHC interaction regions. In this paper, we present the field quality measurements in the first 3.7-m long LQS01 model based on the modified TQS mechanical structure. The results are compared to the expectations from the magnet geometry and magnetic properties of coils and iron yoke. Moreover, we present a comparison between this magnet and the short models previously measured.
Date: August 1, 2010
Creator: Velev, G.V.; Ambrosio, G.; Andreev, N.; Anerella, M.; Bossert, R.; Caspi, S. et al.
Partner: UNT Libraries Government Documents Department

LARP Long Nb3Sn Quadrupole Design.

Description: A major milestone for the LHC Accelerator Research Program (LARP) is the test, by the end of 2009, of two 4m-long quadrupole magnets (LQ) wound with Nb{sub 3}Sn conductor. The goal of these magnets is to be a proof of principle that Nb{sub 3}Sn is a viable technology for a possible LHC luminosity upgrade. The design of the LQ is based on the design of the LARP Technological Quadrupoles, presently under development at FNAL and LBNL, with 90-mm aperture and gradient higher than 200 T/m. The design of the first LQ model will be completed by the end of 2007 with the selection of a mechanical design. In this paper we present the coil design addressing some fabrication technology issues, the quench protection study, and three designs of the support structure.
Date: August 27, 2007
Creator: Ambrosio, G.; Andreev, N.; Anerella, M.; Barzi, E.; Bossert, R.; Caspi, S. et al.
Partner: UNT Libraries Government Documents Department

Construction and Test of 3.5 m Nb3Sn Racetrack Coils for LARP.

Description: Development of high-performance Nb{sub 3}Sn quadrupoles is one of the major goals of the LHC Accelerator Research Program (LARP). As part of this program, long racetrack magnets were made in order to check the fabrication steps for long Nb{sub 3}Sn coils, that the changes in coil length that take place during reaction and cooldown are correctly accounted for in the quadrupole design, and the use of a long aluminum shell for the support structure. This paper reports the construction of the first long Nb{sub 3}Sn magnet with racetrack coils 3.6 m long. The magnet reached a nominal 'plateau' at 9596 A after five quenches. This is about 90% of the estimated conductor limit. The peak field in the coils at this current was 11 T.
Date: August 27, 2007
Creator: Wanderer,P.; Ambrosio, G.; Anerella, M.; Barzi, E.; Bossert, R.; Caspi, S. et al.
Partner: UNT Libraries Government Documents Department