6,144 Matching Results

Search Results

Advanced search parameters have been applied.
in creator/contributor: "Langley Aeronautical Laboratory"  
Results: 1 - 24 next
open access

Analysis of Wind-Tunnel Stability and Control Tests in Terms of Flying Qualities in Full-Scale Airplanes

Description: From Summary: "The analysis of results of wind-tunnel stability and control tests of powered airplane models in terms of the flying qualities of full-scale airplanes is advocated. In order to indicate the topics upon which comments are considered desirable in the report of a wind-tunnel stability and control investigation and to demonstrate the nature of the suggested analysis, the present NACA flying-qualities requirements are discussed in relation to wind-tunnel tests. General procedures for … more
Date: October 1943
Creator: Kayten, Gerald G.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

A method for studying the hunting oscillations of and airplane with a simple type of automatic control

Description: Report presenting a method for predicting the amplitude and frequency, under certain simplifying conditions, of the hunting oscillations of an automatically controlled aircraft with lag in the control system or in response of the aircraft to the controls. Formulas are given expressing the response to a variation of signal in terms of response to a unit signal.
Date: May 1944
Creator: Jones, Robert T.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Investigations toward simplification of missile control systems

Description: Paper presenting three ideas regarding potential simplifications of missile-control systems in order to make them more reliable without sacrificing system performance. The three methods presented include an autorotating-vane spoiler, a bellows flap, and free controls. All are based on modified airplane control systems.
Date: November 12, 1953
Creator: Curfman, Howard J., Jr.; Strass, H. Kurt & Crane, Harold L.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Experiments on Drag of Revolving Disks, Cylinders and Streamline Rods at High Speeds

Description: Report presenting an experimental investigation concerned primarily with the extension of test data on the drag of revolving disks, cylinders, and streamline rods to high Mach numbers and Reynolds numbers. The tests generally confirm earlier theories and add in some new results. One of the primary findings of interest is that skin friction does not depend on Mach number.
Date: June 1944
Creator: Theodorsen, Theodore & Regier, Arthur
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Emergency Measures for Increasing the Range of Fighter Airplanes

Description: "An analysis was made to show the relative effectiveness of streamline external fuel tanks, a fuel tank in the form of a wing mounted in a biplane position, and auxiliary wing panels attached at the wing tips to increase the span as temporary means for increasing the range of a fighter-type airplane. Figures and charts for the various devices considered show the results of calculations of range, duration of flight, and take-off distance for both land-base and carrier operation. The results indi… more
Date: May 1943
Creator: Jones, Robert T. & Wetmore, Joseph W.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Review of Flight Tests of NACA C and D Cowlings on the XP-42 Airplane

Description: Report presenting the results of flight tests of the performance and cooling characteristics of three NACA D cowlings and of a conventional NACA C cowling on the XP-42 airplane. The D cowling is, generally, characterized by the use of an annular inlet and diffuser section for the engine-cooling air. An increase in maximum speed was noted in the XP-42 airplane due to the change from a C cowling to a D cowling.
Date: April 1943
Creator: Johnston, J. Ford
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Flight Tests of Modifications to Improve the Aileron Control Characteristics of a North American XP-51 Airplane (AC No. 41-38)

Description: Investigations were undertaken to improve the ailerons of a P-51 fighter so as to obtain greater effectiveness without increasing the stick forces. Modifications consisted of increasing the deflection range of the aileron to 70 percent and changing the original concave section to a thick section with beveled trailing edge. Results of the modified ailerons showed an increase in effectiveness over the original aileron of 70 percent at low speed and 55 percent at high speeds.
Date: June 1942
Creator: White, M. D. & Hoover, Herbert H.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

An approximate spin design criterion for monoplanes

Description: "A quantitative criterion of merit has been needed to assist airplane designers to incorporate satisfactory spinning characteristics into new designs. An approximate empirical criterion, based on the projected side area and the mass distribution of the airplane, has been formulated in a recent British report. In the present paper, the British results have been analyzed and applied to American designs. A simpler design criterion based solely on the type and the dimensions of the tail, has been d… more
Date: June 1939
Creator: Seidman, Oscar & Donlan, Charles J.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

On the plane potential flow past a symmetrical lattice of arbitrary airfoils

Description: Report presenting a theoretical investigation of the two-dimensional, incompressible potential flow past a symmetrical lattice of airfoils of arbitrary shape. Expressions are given for evaluation of the velocity and pressure distribution at the airfoil boundary.
Date: January 1944
Creator: Garrick, I. E.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Comparison of the performance of a helicopter-type ram-jet engine under various centrifugal loadings

Description: Report presenting an investigation of an 18-foot-radius helicopter rotor powered by tip-mounted ramjet engines in the helicopter test tower. The engine performance is compared with the performance determined in a previous investigation of a 9-foot-radius rotor with the same engines at similar speeds but with twice the centrifugal forces. Results regarding the propulsive characteristics, minimum specific fuel consumption and corresponding propulsive thrust, and operational characteristics are pr… more
Date: October 7, 1953
Creator: Radin, Edward J. & Carpenter, Paul J.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Critical combinations of shear and transverse direct stress for an infinitely long flat plate with edges elastically restrained against rotation

Description: Report presenting an exact solution and a closely concurring approximate energy solution for the buckling of an infinitely long flat plate under combined shear and transverse direct stress with edges elastically restrained against rotation. An appreciable fraction of the critical stress in pure shear may be applied to the plate without any reduction in the transverse compressive stress necessary to produce buckling.
Date: January 1945
Creator: Batdorf, S. B. & Houbolt, John C.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

NACA Mach number indicator for use in high-speed tunnels

Description: Report presenting a description of a device for indicating stream Mach number in a high-speed tunnel. It consists of a mechanism for determining the pressure ratio that Mach number is a function of. The instrument is in service in the 8-foot high-speed tunnel and its accuracy has been found adequate for wind-tunnel requirements.
Date: July 1943
Creator: Smith, Norman F.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Profile-Drag Coefficients of Conventional and Low-Drag Airfoils as Obtained in Flight

Description: "The results of flight investigations of the profile drag of several carefully finished conventional and low-drag airfoils are presented. The results indicated that in all cases lower profile-drag coefficients were obtained with the low-drag than with the conventional airfoils over the range of lift coefficient tested and that, for comparable conditions of lift coefficient and Reynolds number, the low-drag airfoils may have profile-drag coefficients which are at least 27 percent lower than the … more
Date: May 1944
Creator: Zalovcik, John A.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

On a New Method for Calculating the Potential Flow Past a Body of Revolution

Description: Report presenting a new method for obtaining the velocity potential of the flow about a solid of revolution moving uniformly in the direction of its axis of symmetry in a fluid otherwise at rest. The method is based essentially on the fact that the form of the differential equation for the velocity potential is invariant with regard to conformal transformations in a meridian plane. The general results are applied to a body of revolution obtained by revolving a symmetrical Joukowski profile abou… more
Date: July 1942
Creator: Kaplan, Carl
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Large-scale low-speed wind-tunnel tests of a model having a 60 degree delta horizontal canard control surface and wing to obtain static-longitudinal-stability and canard surface hinge-moment data

Description: Report presenting a wind-tunnel investigation of a model equipped with a 60 degree delta wing and a 60 degree delta horizontal all-movable canard control surface to determine the stability, control, and canard-surface hinge-moment characteristics at low speeds and at a Reynolds number of 9 x 10(exp 6). Two longitudinal positions of the canard surface were tested. Results regarding lift and pitching moment, drag, and hinge moment are provided.
Date: June 17, 1954
Creator: Burrows, Dale L.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Wind-Tunnel Investigation to Determine the Horizontal- and Vertical-Tail Contributions to the Static Lateral Stability Characteristics of a Complete-Model Swept-Wing Configuration at High Subsonic Speeds

Description: Results regarding an investigation to determine the horizontal- and vertical-tail contributions to the static lateral stability of a complete-model swept-wing configuration at high subsonic speeds. Generally, Mach number effects within the range studied and wing effects on the tail contribution were small and the overall trends of the data of the present investigation agreed with those which have been established at low speeds.
Date: July 10, 1953
Creator: Wiggins, James W.; Kuhn, Richard E. & Fournier, Paul G.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

The development and application of high-critical-speed nose inlets

Description: From Summary: "An analysis of the nose-inlet shapes developed in previous investigations to represent the optimum from the standpoint of critical speed has shown that marked similarity exists between the nondimensional profiles of inlets which have widely different proportions and critical speeds. With the nondimensional similarity of such profiles established, the large differences in the critical speeds of these nose inlets must be a function of their proportions. An investigation was underta… more
Date: July 1945
Creator: Baals, Donald D.; Smith, Norman F. & Wright, John B.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Rocket-Model Investigation to Determine the Hinge-Moment and Normal-Force Properties of a Full-Span, Constant-Chord, Partially Balanced Trailing-Edge Control on a 60 Degree Clipped Delta Wing Between Mach Numbers of 0.50 and 1.26

Description: Report presenting a free-flight investigation of a rocket-powered research model to determine the hinge-moment and normal-force characteristics of a trailing-edge control on a delta wing between Mach numbers of 0.50 and 1.26. The hinge-line location of 40 percent control chord satisfactorily reduced the high hinge moments associated with plain flap-type controls. Results regarding hinge moments and normal force are provided.
Date: October 30, 1953
Creator: Martz, C. William & Goslee, John W.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

On the Flow of a Compressible Fluid by the Hodography Method 1: Unification and Extension of Present-Day Results

Description: Report presenting elementary basic solutions of the equations of motion of a compressible fluid in the hodograph variables are developed and used to provide a basis for comparison in the form of velocity correction formulas, of corresponding compressible and incompressible flows.
Date: March 1944
Creator: Garrick, I. E. & Kaplan, Carl
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

The Lagrangian Multiplier Method of Finding Upper and Lower Limits to Critical Stresses of Clamped Plates

Description: "The theory of Lagrangian multipliers is applied to the problem of finding both upper and lower limits to the true compressive buckling stress of a clamped rectangular plate. The upper and lower limits thus bracket the truss, which cannot be exactly found by the differential-equation approach. The procedure for obtaining the upper limit, which is believed to be new, presents certain advantages over the classical Raleigh-Rite method of finding upper limits" (p. 1).
Date: 1946
Creator: Budiansky, Bernard & Hu, Pai C.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

The Unsteady Lift of a Finite Wing

Description: Note discussing the lift of a finite wing including the calculations and constants for each step of the lift. This information is compared against the lift of an infinite wing. From Summary: "Unsteady lift function for wings of finite aspect ratio have been calculated by approximate methods involving corrections of the aerodynamic inertia and of the angle of the infinite wing. The starting lift of the finite wing is found to be only slightly less than that of the infinite wing; whereas the fina… more
Date: January 1939
Creator: Jones, Robert T.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Determination of General Relations for the Behavior of Turbulent Boundary Layers

Description: Report presenting an analysis of data for turbulent boundary layers along wings and bodies of various shapes in order to determine the fundamental variables that control the development of turbulent boundary layers. Results indicate that the type of velocity distribution in the boundary layer could be expressed in terms of a single parameter.
Date: July 1943
Creator: von Doenhoff, Albert E. & Tetervin, Neal
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Analysis of Heat and Compressibility Effects in Internal Flow Systems and High-Speed Tests of a Ram-Jet System

Description: Report presenting an analysis of the effects of heat and compressibility in the flow through the internal systems of aircraft. Equations and charts are developed whereby the flow characteristics at key stations in a typical internal system may be readily obtained.
Date: September 1942
Creator: Becker, John V. & Baals, Donald D.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
Back to Top of Screen