2 Matching Results

Search Results

Advanced search parameters have been applied.

Continuous bench-scale slurry catalyst testing: Direct coal liquification of Rawhide sub-bituminous coal. Technical report, July 1995--December 1995

Description: In 1994 extensive tests were conducted in the Exxon Research and Engineering Recycle Coal Liquefaction Unit (RCLU) in Baton Rouge, Louisiana. The work conducted in 1994 explored a variety of dispersed iron molybdenum promoted catalyst systems for direct coal liquefaction of Rawhide subbituminus coal. The goal was to identify the preferred iron system. We learned that among the catalysts tested, all were effective; however, none showed a large process advantage over the others. In 1995, we tested dispersed molybdenum catalysts systems for direct coal liquefaction on a second subbituminous coal, Black Thunder. Catalyst properties are shown in Table 1. We also checked a molybdenum promoted iron case, as well as the impact of process variables, such as sulfur type, hydrogen treat rate, and catalyst addition rate, as shown in Table 2. In 1995, we ran 18 material balances over a 7 week period, covering 7 conditions. This report covers the 1995 operations and results.
Date: May 24, 1996
Creator: Coless, L.A.; Poole, M.C. & Wen, M.Y.
Partner: UNT Libraries Government Documents Department

Continuous bench-scale slurry catalyst testing: Direct coal liquefaction of rawhide sub-bituminous coal. Final topical report, June 1994--December 1994

Description: Supported catalysts, either in fixed bed or ebullating bed reactors, are subject to deactivation with time, especially if the feed contains deactivating species, such as metals and coke precursors. Dispersed catalyst systems avoid significant catalyst deactivation because there are no catalyst pores to plug, hence no pore mouth plugging, and hopefully, no relevant decline of catalyst surface area or pore volume. The tests carried out in 1994, at the Exxon Research and Development Laboratories (ERDL) for DOE covered a slate of 5 dispersed catalysts for direct coal liquefaction of Rawhide sub-bituminous coal, which is similar to the Black Thunder coal tested earlier at Wilsonville. The catalysts included three iron and two molybdenum types. The Bailey iron oxide and the two molybdenum catalysts have previously been tested in DOE-sponsored research. These known catalysts will be used to help provide a base line and tie-in to previous work. The two new catalysts, Bayferrox PK 5210 and Mach-1`s Nanocat are very finely divided iron oxides. The iron oxide addition rate was varied from 1.0 to 0.25 wt % (dry coal basis) but the molybdenum addition rate remained constant at 100 wppm throughout the experiments. The effect of changing recycle rate, sulfur and iron oxide addition rates, first stage reactor temperature, mass velocity and catalyst type were tested in the 1994 operations of ERDL`s recycle coal liquefaction unit (RCLU). DOE will use these results to update economics and plan future work. The test program will resume in mid 1995, with another 2-3 months of pilot plant testing.
Date: November 21, 1995
Creator: Coless, L.A.; Poole, M.C. & Wen, M.Y.
Partner: UNT Libraries Government Documents Department