13 Matching Results

Search Results

Advanced search parameters have been applied.

Polymethylsilsesquioxanes through base-catalyzed redistribution of oligomethylhydridosiloxanes

Description: There has been an increasing amount of interest in silsesquioxanes and polysilsesquioxanes. They have been used as models for silica surfaces and have been shown to have great potential for several industrial applications. Typical synthesis of polysilsesquioxanes involves the hydrolysis of organotricholorosilanes and/or organotrialkoxysilanes in the presence of acid or base catalysts, usually in the presence of organic solvents.
Date: April 4, 2000
Creator: RAHIMIAN,KAMYAR; ASSINK,ROGER A. & LOY,DOUGLAS A.
Partner: UNT Libraries Government Documents Department

Polysilsesquioxanes through base-catalyzed redistribution of oligohydridosiloxanes

Description: Organopolysilsesquioxanes have recently gained much interest as materials for low-K dielectrics, ceramic precursors and photoresists. Typical sol-gel synthesis of polysilsesquioxanes involves the hydrolysis of organotricholorosilanes and/or organotrialkoxysilanes in the presence of acid or base catalysts and organic solvents. However, under sol-gel conditions most organotrialkoxysilanes do not afford silsesquioxane gels. This limits the range of organic functionalities that can be introduced into these hybrid organic-inorganic materials. An alternative route to polysilsesquioxanes is through oligohydridosiloxanes. Catalytic disproportionation, by titanium complexes, of linear or cyclic oligomers of methylhydridosiloxanes can lead to polymethylsilsesquioxanes. The authors have shown that disproportionation of oligomethylhydridosiloxanes can also be catalyzed by tetrabutylammonium hydroxide to yield polymethylsilsesquioxanes (scheme 1). This replaces the step-growth sol-gel polymerization process of organotrialkoxysilanes, which requires solvent, stoichiometric water and produces alcohol and water condensation by-products. Tetraalkylammonium hydroxides, as catalysts, are also attractive because they readily decompose by heating above 150 C; thus, they can be easily removed from the final materials. In this paper the authors report on both the catalytic and stoichiometric redistribution of organohydridosiloxanes to produce polysilsesquioxane foams and gels of the formula (RSiO{sub 1.5}){sub n} which otherwise cannot be obtained through traditional sol-gel means.
Date: May 1, 2000
Creator: RAHIMIAN,KAMYAR; ASSINK,ROGER A.; LANG,DAVID P. & LOY,DOUGLAS A.
Partner: UNT Libraries Government Documents Department

Condition Monitoring of a Thermally Aged HTPB/IPDI Elastomer by NMR CP Recovery Times

Description: A hydroxy-terminated polybutadiene (HTPB)/isophorone diisocyanate (IPDI) elastomer is commonly used as propellant binder material. The thermal degradation of the binder is believed to be an important parameter governing the performance of the propellant. The aging of these binders can be monitored by mechanical property measurements such as modulus or tensile elongation. These techniques, however, are not easily adapted to binder agents that are dispersed throughout a propellant. In this paper the authors investigated solid state NMR relaxation times as a means to predict the mechanical properties of the binder as a function of aging time. {sup 1}H spin-lattice and spin-spin relaxation times were found to be insensitive to the degree of thermal degradation of the elastomer. Apparently these relaxation times depend on localized motions that are only weakly correlated with mechanical properties. A strong correlation was found between the {sup 13}C cross-polarization (CP) NMR time constant, T{sub cp}, and the tensile elongation at break of the elastomer as a function of aging time. A ramped-amplitude CP experiment was shown to be less sensitive to imperfections in setting critical instrumental parameters for this mobile material.
Date: July 24, 2000
Creator: ASSINK,ROGER A.; LANG,DAVID & CELINA,MATHIAS C.
Partner: UNT Libraries Government Documents Department

Chemical and Physical Changes in a Hydrolyzed Poly(ester urethane)

Description: Hydrolytic degradation has been shown to be a significant problem for poly(ester urethane) elastomers exposed to high humidity environments. The ester group in the soft segment is particularly susceptible to hydrolysis. One of the products of this reaction is a carboxylic acid group that catalyses further hydrolysis. The resulting reduction in molecular weight leads to deterioration of the elastomer's mechanical properties. In this paper we have measured the extent of the hydrolysis reaction by {sup 13}C NMR spectroscopy. In addition we have measured the spin-spin relaxation time of the soft phase and followed the increase in mobility of these segments. Both measurements were performed on the solid polymer. These measurements provide an excellent monitoring tool of the chemical and physical state of polymer during the aging process.
Date: November 3, 1999
Creator: ASSINK,ROGER A.; CELINA,MATHIAS C. & LANG,DAVID P.
Partner: UNT Libraries Government Documents Department

{sup 17}O NMR investigation of oxidative degradation in polymers under gamma-irradiation

Description: The {gamma}-irradiated-oxidation of pentacontane (C{sub 50}H{sub 102}) and the polymer polyisoprene was investigated as a function of oxidation level using {sup 17}O nuclear magnetic resonance (NMR) spectroscopy. It is demonstrated that by using {sup 17}O labeled O{sub 2} gas during the {gamma}-irradiation process, details about the oxidative degradation mechanisms can be directly obtained from the analysis of the {sup 17}O NMR spectra. Production of carboxylic acids is the primary oxygen-containing functionality during the oxidation of pentacontane, while ethers and alcohols are the dominant oxidation product observed for polyisoprene. The formation of ester species during the oxidation process is very minor for both materials, with water also being produced in significant amounts during the radiolytic oxidation of polyisoprene. The ability to focus on the oxidative component of the degradation process using {sup 17}O NMR spectroscopy demonstrates the selectivity of this technique over more conventional approaches.
Date: March 8, 2000
Creator: ALAM,TODD M.; CELINA,MATHIAS C.; ASSINK,ROGER A.; CLOUGH,ROGER LEE & GILLEN,KENNETH T.
Partner: UNT Libraries Government Documents Department

Analysis of Hydroperoxides in solid Polyethylene by NMR and EPR Spectroscopy

Description: The authors have shown that the hydroperoxide species in {gamma}-irradiated {sup 13}C-polyethylene can be directly observed by {sup 13}C MAS NMR spectroscopy. The experiment was performed without the need for special sample preparation such as chemical derivatization or dissolution. Annealing experiments were employed to study the thermal decomposition of the hydroperoxide species and to measure an activation energy of 98 kJ/mol. EPR spectroscopy suggests that residual polyenyl and alkylperoxy radicals are predominantly trapped in interracial or crystalline regions, while the peroxy radicals observed after UV-photolysis of hydroperoxides are in amorphous regions.
Date: June 12, 2000
Creator: ASSINK,ROGER A.; CELINA,MATHIAS C.; DUNBAR,TIMOTHY D.; ALAM,TODD M.; CLOUGH,ROGER LEE & GILLEN,KENNETH T.
Partner: UNT Libraries Government Documents Department

Evaporation-Induced Self-Assembly of Hybrid Bridged Silsesquioxane Film and Particulate Mesophases with Integral Organic Functionality

Description: Since the discovery of surfactant-templated silica mesophases, the development of organic modification schemes to impart functionality to the pore surfaces has received much attention. Most recently, using the general class of compounds referred to as bridged silsesquioxanes (RO){sub 3}Si-R{prime}-Si(OR){sub 3} (Scheme 1), three research groups have reported the formation of a new class of poly(bridgedsilsesquioxane) mesophases BSQMs with integral organic functionality. In contrast to previous hybrid mesophases where organic ligands or molecules are situated on pore surfaces, this class of materials necessarily incorporates the organic constituents into the framework as molecularly dispersed bridging ligands. Although it is anticipated that this new mesostructural organization should result in synergistic properties derived from the molecular scale mixing of the inorganic and organic components, few properties of BSQMs have been measured. In addition samples prepared to date have been in the form of granular precipitates, precluding their use in applications like membranes, fluidics, and low k dielectric films needed for all foreseeable future generations of microelectronics.
Date: June 12, 2000
Creator: LU,YUNFENG; FAN,HONGYOU; DOKE,NILESH; LOY,DOUGLAS A.; ASSINK,ROGER A.; LAVAN,DAVID A. et al.
Partner: UNT Libraries Government Documents Department

Analysis of Hydroperoxides in Solid Polyethylene by MAS (13)C NMR and EPR

Description: {sup 13}C-enriched polyethylene was subjected to {gamma}-irradiation in the presence of air at 25 and 80 C for total doses ranging from 71 to 355 kGy. Significant quantities of hydroperoxides were detected in the 25 C irradiated sample by {sup 13}C magic angle spinning NMR spectroscopy. This method of detection was performed on the solid polymer and required no chemical derivatization or addition of solvent. The chemical stability and subsequent products of the hydroperoxide species were studied by annealing the irradiated samples in air at temperatures ranging from 22 to 110 C. A time-temperature superposition analysis provided an activation energy of 108 kJ/mol for the hydroperoxide decomposition process. The primary products of hydroperoxide decomposition were ketones and secondary alcohols with lesser amounts of acids and esters. EPR measurements suggest that the reactive hydroperoxide species reside in the amorphous phase of polyethylene, consistent with degradation occurring in the amorphous phase.
Date: November 19, 1999
Creator: ASSINK,ROGER A.; CELINA,MATHIAS C.; DUNBAR,TIMOTHY D.; ALAM,TODD M.; CLOUGH,ROGER LEE & GILLEN,KENNETH T.
Partner: UNT Libraries Government Documents Department

Dialkylenecarbonate-Bridged Polysilsesquioxanes. Hybrid Organic-Inorganic Sol-Gels with a Thermally Labile Bridging Group

Description: In this paper, we introduce a new approach for altering the properties of bridged polysilsesquioxane xerogels using post-processing mobilization of the polymeric network. The bridging organic group contains latent functionalities that can be liberated thermally, photochemically, or by chemical means after the gel has been processed to a xerogel. These modifications can produce changes in density, volubility, porosity, and or chemical properties of the material. Since every monomer possesses two latent functional groups, the technique allows for the introduction of high levels of functionality in hybrid organic-inorganic materials. Dialkylenecarbonate-bridged polysilsesquioxane gels were prepared by the sol-gel polymerization of bis(triethoxysilylpropyl)carbonate (1) and bis(triethoxysilylisobutyl)-carbonate (2). Thermal treatment of the resulting non-porous xerogels and aerogels at 300-350 C resulted in quantitative decarboxylation of the dialkylenecarbonate bridging groups to give new hydroxyalkyl and olefinic substituted polysilsesquioxane monolithic xerogels and aerogels that can not be directly prepared through direct sol-gel polymerization of organotrialkoxysilanes.
Date: July 20, 1999
Creator: Assink, Roger A.; Baugher, Brigitta M.; Beach, James V.; Loy, Douglas A.; Shea, Kenneth J.; Small, James H. et al.
Partner: UNT Libraries Government Documents Department

Investigation of Oxidative Degradation in Polymers Using (17)O NMR Spectroscopy

Description: The thermal oxidation of pentacontane (C{sub 50}H{sub 102}), and of the homopolymer polyisoprene, has been investigated using {sup 17}O NMR spectroscopy. By performing the oxidation using {sup 17}O labeled O{sub 2} gas, it is possible to easily identify degradation products, even at relatively low concentrations. It is demonstrated that details of the degradation mechanism can be obtained from analysis of the {sup 17}O NMR spectra as a function of total oxidation. Pentacontane reveals the widest variety of reaction products, and exhibits changes in the relative product distributions with increasing O{sub 2} consumption. At low levels of oxygen incorporation, peroxides are the major oxidation product, while at later stages of degradation these species are replaced by increasing concentrations of ketones, alcohols, carboxylic acids and esters. Analyzing the product distribution can help in identification of the different free-radical decomposition pathways of hydroperoxides, including recombination, proton abstraction and chain scission, as well as secondary reactions. The {sup 17}O NMR spectra of thermally oxidized polyisoprene reveal fewer degradation functionalities, but exhibit an increased complexity in the type of observed degradation species due to structural features such as unsaturation and methyl branching. Alcohols and ethers formed from hydrogen abstraction and free radical termination.
Date: July 20, 1999
Creator: Alam, Todd M.; Celina, Mathew; Assink, Roger A.; Clough, Roger L.; Gillen, Kenneth T. & R., Wheeler David
Partner: UNT Libraries Government Documents Department

The impact of solution agglomeration on the deposition of self-assembled monolayers

Description: Self-assembled monolayers (SAMS) are commonly produced by immersing substrates in organic solutions containing trichlorosilane coupling agents. Unfortunately, such deposition solutions can also form alternate structures including inverse micelles and lamellar phases. The formation of alternate phases is one reason for the sensitivity of SAM depositions to factors such as the water content of the deposition solvent. If such phases are present, the performance of thin films used for applications such as minimization of friction and stiction in micromachines can be seriously compromised. Inverse micelle formation has been studied in detail for depositions involve 1H-, 1H-, 2H-, 2H-perfluorodecyltrichlorosilane (FDTS) in isooctane. Nuclear magnetic resonance experiments have been used to monitor the kinetics of hydrolysis and condensation reactions between water and FDTS. Light scattering experiments show that when hydrolyzed FDTS concentrations reach a critical concentration, there is a burst of nucleation to form high concentrations of spherical agglomerates. Atomic force microscopy results show that the agglomerates then deposit on substrate surfaces. Deposition conditions leading to monolayer formation involve using deposition times that are short relative to the induction time for agglomeration. After deposition, inverse micelles can be converted into lamellar or monolayer structures with appropriate heat treatments if surface concentrations are relatively low.
Date: April 17, 2000
Creator: BUNKER,BRUCE C.; CARPICK,ROBERT W.; ASSINK,ROGER A.; THOMAS,MICHAEL L.; HANKINS,MATTHEW G.; VOIGT,JAMES A. et al.
Partner: UNT Libraries Government Documents Department