470 Matching Results

Search Results

Advanced search parameters have been applied.
in subjects: "Iron"  
Results: 1 - 24 next
open access

STAINLESS STEEL WASTES. III. LABORATORY STUDIES OF THE RATE OF REMOVAL OF STAINLESS STEEL IONS BY MERCURY CATHODE ELECTROLYSIS

Description: ABS> The removal rates of iron, nickel, and chromium from synthetic stainless steel waste solutions during electrolysis over a mercury cathode were studied. The loading capacity of the mercury for the stainless steel metals was estimated on the basis of laboratory experiments to be about two% by weight. The laboratory data indicated that, at an electrode potential of --1.80 voits vs S.C.E., 85 ampere-hours per liter of waste removed essentially all of the stainless steel ions from a sulfuric ac… more
Date: February 12, 1962
Creator: Anderson, D. R. & Rhodes, D. W.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

THE FERRITE BIASING SYSTEM FOR THE RADIO FREQUENCY CAVITIES OF THE PRINCETON-PENNSYLVANIA 3 Bev PROTON SYNCHROTRON

Description: A description is given of the ferrite biasing system for the four tuned radio frequency cavities of the synchrotron. Each ferrite loaded double cavity has a single turn bias winding which is driven to a peak current of 13,500 amperes by a push-pull transformer arrangement. There is automatic tap changing of the transformer to accommodate the variable impedance load (for power considerations). The programming and frequency response of the system have to be such that each cavity can operate as th… more
Date: August 29, 1962
Creator: Rees, G.H.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Corrosion Behavior of Reactor Materials in Fluoride Salt Mixtures

Description: Molten fluoride salts, because of their radiation stability and ability to contain both Th and U, offer important advantages as high-temperature fuel solutions for nuclear reactors and as media suitable for nuclear fuel processing. Both applications have stimulated experimental and theoretical studies of the corrosion processes by which molten salt mixtures attack potential reactor materials. Corrosion experiments with fluoride salts which were conducted in support of the Molten-Salt Reactor E … more
Date: September 19, 1962
Creator: DeVan, J. H. & Evans, R. B., III
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

PHYSICO-CHEMICAL STUDIES OF Fe--Cr--Al-CLAD FUEL SYSTEMS.

Description: Reactions which can occur between oxidation-resistant Fe - CR - AL base alloys and UO{sub 2} at 500 to 1200 deg C are discussed. Aluminum in the Fe - Cr - Al-base cladding reduces the UO{sub 2} in the cermet fuels at 1000 to 1200 deg C. The U dissolves and diffuses through the cladding and is converted to an oxide. Oxygen combines with Al forming Al{sub 2}O{sub 3} which inhibits Al diffusion into the UO{sub 2}. The diffusion for Al in Cr leads to the development of a Cr barrier and reduces the … more
Date: October 31, 1969
Creator: Edwards, H.S. & Bohlander, K.M.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

HEAD-END TREATMENT OF LOW LEVEL WASTES PRIOR TO FOAM SEPARATION

Description: Calcium-magnesium precipitation apparatus was used to reduce the concentrations of these elements in ORNL tap water, used as a substitute for waste water of low level of radioactivity, prior to strontium removal by foam separation. With and without alkali and flocculator chambers and with a stirred sludge of ratio height to diameter equal to 1/1 to ~4/1, use of 5 x 10/sup -3/ M each of NaOH and Na/sub 2/CO/sub 3/ and 2 ppm Fe/sup 3+/ reduced the dissolved Ca + Mg concentrations to 1 to 2 ppm as… more
Date: May 29, 1962
Creator: Schonfeld, E. & Davis, W. Jr.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Chemical Processing Technology Quarterly Progress Report, January-March 1961

Description: Studies are reported on aqueous zirconium processing, dissolution of BeO- UO/sub 2/ ceramic fuel, the aqueous stainless steel process, the behavior of dibutyl phosphates, use of boron (boric acid) solution to assure critical safety, fluidized bed calcination, conversion of amorphous alumina to alpha alumina, the Demonstrational Waste Calcining Facility, removal of long-lived radioisotopes from waste solutions, separation of iron, nickel, and chromiun from stainless steel waste solutions, electr… more
Date: October 31, 1962
Creator: Bower, J. R.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

SALT PHASE CHLORINATION OF REACTOR FUELS. III. CATALYZED DISSOLUTION OF URANIUM DIOXIDE IN LEAD CHLORIDE-CHLORIDE SYSTEMS

Description: The rapid dissolution of uranium dioxide is described, wherein copper is added to molten lead chloride at 550 deg C. and chlorine is passed through the melt. The integral dissolution of zirconium-clad uranium dioxide fuels is also described. The dissolution rate of uranium dioxide is directly proportional to the concentration of cuprous chloride if an excess of chlorine is used; the value for the rate constant is approximately 100 mg (UO/sub 2/) cm/sup -2/ min/sup -1/ (CuCl molality). The urani… more
Date: February 1, 1962
Creator: Vander Wall, E. M.; Bauer, D. L. & Hahn, H. T.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

ADVANCED PRESSURE VESSEL MATERIALS.

Description: Data on 5Cr - 3Mo - 12Ni alloy, PH13 - 8Mo and Iconel 718 for pressure vessel application are given. The 5Cr - 3Mo - 12Ni posseses characteristics suited to uniform aging of heavy sections. Tensile and toughness properties are good, and structural stability up to 315 deg C is adequate. Weldability with 12Ni - 3Cr - 3Mo filler material is good but 12Ni - 5Cr - 3Mo filler is more efficient. Aging characteristics of PH13 - 8Mo may not be suited to uniform aging of heavy sections. Excellent tensile… more
Date: October 31, 1969
Creator: Robertshaw, F.C.; Stephan, H.R. & McConnelee, J.E.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Corrosion Tests in Molten Lead-Lead Chloride

Description: Corrosion tests were run on some commercial grade metals, an alloy steel, stainless steels, chromium-- nickel-iron alloys, nickel base alloys, cobalt base alloys, and a chromium-- nickel-- cobalt-- iron ailoy in the system: leadlead chloride-lead chloride vapor at 528 deg C under an argon atmosphere. The following metals and alloys showed a corrosion rate of nine mils per month or less and did not suffer intergranular or other localized attack: tantalum, Incoloy 804, Hastelloy F, Carpenter-20 (… more
Date: June 1, 1961
Creator: Stolica, N. D.; Adams, G. S. & Bomar, M. R.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

LABORATORY DEVELOPMENT OF A CARRIER-PRECIPITATION PROCESS FOR THE RECOVERY OF STRONTIUM FROM PUREX WASTES

Description: Strontium recovery from Purex 1WW was investigated with simulated feeds and tracer activities. Initial experiments demonstrated recovery of over 70% of the strontium by sulfate precipitation from partially neutralized 1WW by either increasing the sulfate concentration to about 3 M or by adding carriers such as lead. Precipitation of iron was avoided by addition of one or more moles of tartrate per two moles of iron. Precipitation at elevated temperatures and addition of lead after pH adjustment… more
Date: May 1, 1961
Creator: Bray, L.A. & Van Tuyl, H.H.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Phase Transformations in Alumina. Technical Report, May to December 1961

Description: e transformation studies showed that synthetic aluminas produced in the laboratory were not transformed to alpha alumina at 400 to 700' deg n the presence of nitric acid and water vapor. Amorphous aluminn produced in the pilot plant was transformed to alpha alumina. This indicated that the amorphous alumina produced in the pilot plant is structurally predisposed to form alpha alumina. Most additives did not appear to have any special effects. Lithium formed zeta alumina, LiAl/sub 5/O/sub 8/. Ph… more
Date: December 1, 1961
Creator: Eding, H J; Huggins, M L & Brown, A G
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
Back to Top of Screen