12,320 Matching Results

Search Results

Results: 1 - 24 next
open access

A 1.8 Mev K+ injector for the high current beam transport experiment fusion

Description: For the High Current Beam Transport Experiment (HCX) at LBNL, an injector is required to deliver up to 1.8 MV of 0.6 A K{sup +} beam with an emittance of {approx}1 p-mm-mrad. We have successfully operated a 10-cm diameter surface ionization source together with an electrostatic quadrupole (ESQ) accelerator to meet these requirements. The pulse length is {approx}4 {micro}s, firing at once every 10-15 seconds. By optimizing the extraction diode and the ESQ voltages, we have obtained an output bea… more
Date: May 20, 2002
Creator: Kwan, J. W.; Bieniosek, F. M.; Henestroza, E.; Prost, L. & Seidl, P.
Item Type: Refine your search to only Article
Partner: UNT Libraries Government Documents Department
open access

1-MeV-Electron Irradiation of GaInAsN Cells: Preprint

Description: This conference paper describes the GaInAsN cells that are measured to retain 933% and 894% of their original efficiency after exposure to 5 X 1014 and 1 X 1015 cm-2 1-MeV electrons, respectively. The rate of degradation is not correlated with the performance at beginning of life (BOL). The depletion width remains essentially unchanged, increasing by< 1%. Temperature-coefficient data for GaInAsN cells are also presented. These numbers are used to project the efficiency of GaInAsN-containing … more
Date: May 1, 2002
Creator: Kurtz, Sarah; King, R. R.; Edmondson, K. M.; Friedman, D. J. & Karam, N. H.
Item Type: Refine your search to only Article
Partner: UNT Libraries Government Documents Department
open access

2-D and 3-D Elastic Modeling with Shared Seismic Models

Description: Several elastic models, both 2-D and 3-D, are being built for use in calculating synthetic elastic seismic data. The models will be made available to the research community, along with the synthetic data that are being calculated from them. These shared models have been proposed or contributed by participants in a collaborative industry, national laboratory, and university research project. The purpose of the modeling is to provide synthetic data to better understand elastic wave propagation an… more
Date: April 30, 2002
Creator: House, L.; Marfurt, K. J.; Larsen, S. & Martin, G. S.
Item Type: Refine your search to only Article
Partner: UNT Libraries Government Documents Department
open access

A 2-Liter, 2000 MPa Air Source for the Radiatively Driven Hypersonic Wind Tunnel

Description: The A2 LITE is a 2 liter, 2000 MPa, 750 K ultra-high pressure (UHP) vessel used to demonstrate UHP technology and to provide an air flow for wind tunnel nozzle development. It is the largest volume UHP vessel in the world. The design is based on a 100:1 pressure intensification using a hydraulic ram as a low pressure driver and a three-layer compound cylinder UHP section. Active control of the 900 mm piston stroke in the 63.5 mm bore permits pressure-time profiles ranging from static to constan… more
Date: May 30, 2002
Creator: Costantino, M & Lofftus, D
Item Type: Refine your search to only Article
Partner: UNT Libraries Government Documents Department
open access

3-D Cavern Enlargement Analyses

Description: Three-dimensional finite element analyses simulate the mechanical response of enlarging existing caverns at the Strategic Petroleum Reserve (SPR). The caverns are located in Gulf Coast salt domes and are enlarged by leaching during oil drawdowns as fresh water is injected to displace the crude oil from the caverns. The current criteria adopted by the SPR limits cavern usage to 5 drawdowns (leaches). As a base case, 5 leaches were modeled over a 25 year period to roughly double the volume of a 1… more
Date: March 1, 2002
Creator: EHGARTNER, BRIAN L. & SOBOLIK, STEVEN R.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

A 3-D ray-trace model for an AMR code on distributed processors

Description: Distributed memory AMR codes provide a special challenge for laser ray-trace modeling. For RAGE we follow the energy-carrying rays through each cell, checking for crossings which require collection a new cell index (1 of 9 in 2D). Density gradients for ray deflections can be calculated 'on the fly.' Substantial excursions must be made from the legacy PIC particle area-weighting approach, but this serves as a useful 1st step. Similarly, IDL now offers a quick graphical rendering, while ENSIGHT g… more
Date: January 1, 2002
Creator: Mason, R. J. (Rodney J.)
Item Type: Refine your search to only Article
Partner: UNT Libraries Government Documents Department
open access

3-D Reservoir and Stochastic Fracture Network Modeling for Enhanced Oil Recovery, Circle Ridge Phosphoria/Tensleep Reservoir, and River Reservation, Arapaho and Shoshone Tribes, Wyoming

Description: The goal of this project is to improve the recovery of oil from the Circle Ridge Oilfield, located on the Wind River Reservation in Wyoming, through an innovative integration of matrix characterization, structural reconstruction, and the characterization of the fracturing in the reservoir through the use of discrete fracture network models.
Date: September 9, 2002
Creator: La Pointe, Paul R. & Hermanson, Jan
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

3-D Reservoir and Stochastic Fracture Network Modeling for Enhanced Oil Recovery, Circle Ridge Phosphoria/Tensleep Reservoir, and River Reservation, Arapaho and Shoshone Tribes, Wyoming

Description: The goal of this project is to improve the recovery of oil from the Circle Ridge Oilfield, located on the Wind River Reservation in Wyoming, through an innovative integration of matrix characterization, structural reconstruction, and the characterization of the fracturing in the reservoir through the use of discrete fracture network models.
Date: September 9, 2002
Creator: Pointe, La; Paul; Parney, Robert; Eiben, Thorsten; Dunleavy, Mike & Whitney, John
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

3-D Reservoir and Stochastic Fracture Network Modeling for Enhanced Oil Recovery, Circle Ridge Phosphoria/Tensleep Reservoir, and River Reservation, Arapaho and Shoshone Tribes, Wyoming

Description: The goal of this project is to improve the recovery of oil from the Circle Ridge Oilfield, located on the Wind River Reservation in Wyoming, through an innovative integration of matrix characterization, structural reconstruction, and the characterization of the fracturing in the reservoir through the use of discrete fracture network models.
Date: September 9, 2002
Creator: La Pointe, Paul; Parney, Robert; Eiben, Thorsten; Dunleavy, Mike; Whitney, John & Eubanks, Darrel
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

3-D Reservoir and Stochastic Fracture Network Modeling for Enhanced Oil Recovery, Circle Ridge Phosphoria/Tensleep Reservoir, and River Reservation, Arapaho and Shoshone Tribes, Wyoming

Description: The goal of this project is to improve the recovery of oil from the Circle Ridge Oilfield, located on the Wind River Reservation in Wyoming, through an innovative integration of matrix characterization, structural reconstruction, and the characterization of the fracturing in the reservoir through the use of discrete fracture network models.
Date: September 9, 2002
Creator: La Pointe, Paul R.; Hermanson, Jan & Eiben, Thorsten
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

3-D Reservoir and Stochastic Fracture Network Modeling for Enhanced Oil Recovery, Circle Ridge Phosphoria/Tensleep Reservoir, Wind River Reservation, Arapaho and Shoshone Tribes, Wyoming

Description: This report describes the results made in fulfillment of contract DE-FG26-00BC15190, ''3-D Reservoir and Stochastic Fracture Network Modeling for Enhanced Oil Recovery, Circle Ridge Phosphoria/Tensleep Reservoir, Wind River Reservation, Arapaho and Shoshone Tribes, Wyoming''. The goal of this project is to improve the recovery of oil from the Tensleep and Phosphoria Formations in Circle Ridge Oilfield, located on the Wind River Reservation in Wyoming, through an innovative integration of matrix… more
Date: November 18, 2002
Creator: La Pointe, Paul; Hermanson, Jan; Parney, Robert; Eiben, Thorsten; Dunleavy, Mike; Steele, Ken et al.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

3-D Seismic Exploration Project, Ute Indian Tribe, Uintah and Ouray Reservation, Uintah County, Utah

Description: The objectives of this North Hill Creek 3-D seismic survey were to: (1) cover as large an area as possible with available budget; (2) obtain high quality data throughout the depth range of the prospective geologic formations of 2,000' to 12,000' to image both gross structures and more subtle structural and stratigraphic elements; (3) overcome the challenges posed by a hard, reflective sandstone that cropped out or was buried just a few feet below the surface under most of the survey area; and (… more
Date: September 9, 2002
Creator: Eckels, Marc T.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

3-D surface profile measurements of large x-ray synchrotron radiation mirrors using stitching interferometry.

Description: Stitching interferometry, using small-aperture, high-resolution, phase-measuring interferometry, has been proposed for quite some time now as a metrology technique to obtain 3-dimensional profiles of surfaces of oversized optical components and substrates. The aim of this work is to apply this method to the specific case of long grazing-incidence x-ray mirrors, such as those used in beamlines at synchrotron radiation facilities around the world. Both fabrication and characterization of these mi… more
Date: September 12, 2002
Creator: Assoufid, L.; Bray, M.; Qian, J. & Shu, D.
Item Type: Refine your search to only Article
Partner: UNT Libraries Government Documents Department
open access

A 3-D Vortex Code for Parachute Flow Predictions: VIPAR Version 1.0

Description: This report describes a 3-D fluid mechanics code for predicting flow past bluff bodies whose surfaces can be assumed to be made up of shell elements that are simply connected. Version 1.0 of the VIPAR code (Vortex Inflation PARachute code) is described herein. This version contains several first order algorithms that we are in the process of replacing with higher order ones. These enhancements will appear in the next version of VIPAR. The present code contains a motion generator that can be use… more
Date: July 1, 2002
Creator: Strickland, James H.; Homicz, Gregory F.; Porter, Vicki L. & Gossler, Albert A.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

3-Dimensional Flow Modeling of a Proposed Hanford Waste Treatment Plant Ion-Exchange Column Design

Description: Historically, it has been assumed that the inlet and outlet low activity waste plenums would be designed such that a nearly uniform velocity profile would be maintained at every axial cross-section (i.e., providing nearly 100 percent use of the resin bed). With this proposed design, we see a LAW outlet distributor that results in significant non-axial velocity gradients in the bottom regions of the bed with the potential to reduce the effectiveness'' of the overall resin bed. The magnitude of t… more
Date: November 2002
Creator: Aleman, Sebastian
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

20% Partial Siberian Snake in the AGS.

Description: An 11.4% partial Siberian snake was used to successfully accelerate polarized proton through a strong intrinsic depolarizing spin resonance in the AGS. No noticeable depolarization was observed. This opens up the possibility of using a 20% to 30% partial Siberian snake in the AGS to overcome all weak and strong depolarizing spin resonances. Some design and operation issues of the new partial Siberian snake are discussed.
Date: November 6, 2002
Creator: Huang, H.; Bai, M.; Brown, K. A.; Glenn, W.; Luccio, A. U.; MacKay, W. W. et al.
Item Type: Refine your search to only Article
Partner: UNT Libraries Government Documents Department
open access

24-CHANNEL GEOPHONE ARRAY FOR HORIZONTAL OR VERTICAL BOREHOLES

Description: This report describes the technical progress on a project to design and construct a multi-channel geophone array that improves tomographic imaging capabilities in both surface and underground mines. Especially important in the design of the array is sensor placement. One issue related to sensor placement is addressed in this report: the method for clamping the sensor once it is emplaced in the borehole. If the sensors (geophones) are not adequately coupled to the surrounding rock mass, the resu… more
Date: August 1, 2002
Creator: Westman, Erik C.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

24-CHANNEL GEOPHONE ARRAY FOR HORIZONTAL OR VERTICAL BOREHOLES

Description: This report describes the technical progress on a project to design and construct a multi-channel geophone array that improves tomographic imaging capabilities in both surface and underground mines. Especially important in the design of the array is sensor placement. One issue related to sensor placement is addressed in this report: the method for clamping the sensor once it is emplaced in the borehole. If the sensors (geophones) are not adequately coupled to the surrounding rock mass, the resu… more
Date: July 1, 2002
Creator: Westman, Erik C.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

24-CHANNEL GEOPHONE ARRAY FOR HORIZONTAL OR VERTICAL BOREHOLES

Description: This report describes the technical progress on a project to design and construct a multi-channel geophone array that improves tomographic imaging capabilities in both surface and underground mines. Especially important in the design of the array is sensor placement. One issue related to sensor placement is addressed in this report: the method for clamping the sensor once it is emplaced in the borehole. If the sensors (geophones) are not adequately coupled to the surrounding rock mass, the resu… more
Date: August 1, 2002
Creator: Westman, Erik C.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

24-CHANNEL GEOPHONE ARRAY FOR HORIZONTAL OR VERTICAL BOREHOLES

Description: This report describes the technical progress on a project to design and construct a multi-channel geophone array that improves tomographic imaging capabilities in both surface and underground mines. Especially important in the design of the array is sensor placement. One issue related to sensor placement is addressed in this report: the development of simple, robust, MSHA-acceptable clamping unit. Improved imaging capabilities will produce energy, environmental, and economic benefits by increas… more
Date: July 1, 2002
Creator: Westman, Erik C.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

24-CHANNEL GEOPHONE ARRAY FOR HORIZONTAL OR VERTICAL BOREHOLES

Description: This report describes the technical progress on a project to design and construct a multi-channel geophone array that improves tomographic imaging capabilities in both surface and underground mines. Especially important in the design of the array is sensor placement. One issue related to sensor placement is addressed in this report: the method for orienting the sensor once it is emplaced in the borehole. If the sensors (geophones) do not have the same orientation, the data will be essentially w… more
Date: July 1, 2002
Creator: Westman, Erik C.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

24 CHANNEL GEOPHONE ARRAY FOR HORIZONTAL OR VERTICAL BOREHOLES

Description: This report describes the technical progress on a project to design and construct a multi-channel geophone array that improves tomographic imaging capabilities in both surface and underground mines. Especially important in the design of the array is sensor placement. One issue related to sensor placement is addressed in this report: the method of emplacing the array in a long, horizontal borehole. Improved imaging capabilities will produce energy, environmental, and economic benefits by increas… more
Date: July 1, 2002
Creator: Westman, Erik C.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
Back to Top of Screen