Search Results

open access

Multilateral Development Banks: U.S. Contributions FY2000-FY2013

Description: This report shows in tabular form how much the Administration requested and how much Congress appropriated for U.S. payments to the multilateral development banks (MDBs) since 2000. It also provides a brief description of the MDBs and the ways they fund their operations. It will be updated periodically as annual appropriation figures are known.
Date: February 1, 2013
Creator: Nelson, Rebecca M.
Partner: UNT Libraries Government Documents Department
open access

Multilateral Development Banks: U.S. Contributions FY2000-FY2011

Description: This report shows in tabular form how much the Administration has requested and how much Congress has appropriated for U.S. payments to the multilateral development banks (MDBs) since 2000. It also provides a brief description of the MDBs and the ways they fund their operations.
Date: March 11, 2011
Creator: Nelson, Rebecca M.
Partner: UNT Libraries Government Documents Department
open access

FY05 LDRD Final Report Spectroscopy of Shocked Deuterium

Description: We summarize the observations of unusual optical properties of shocked liquid deuterium (D{sub 2}) that led to proposing spectroscopic measurements. The apparatus built for the measurements is briefly described, along with some representative results in a test material. Unfortunately, spectroscopic measurements were not performed in shocked D{sub 2} during the course of the project. Some reasons are noted.
Date: March 27, 2006
Creator: Holmes, N. C.
Partner: UNT Libraries Government Documents Department
open access

FY05 HPCRM Annual Report: High-Performance Corrosion-Resistant Iron-Based Amorphous Metal Coatings

Description: New corrosion-resistant, iron-based amorphous metals have been identified from published data or developed through combinatorial synthesis, and tested to determine their relative corrosion resistance. Many of these materials can be applied as coatings with advanced thermal spray technology. Two compositions have corrosion resistance superior to wrought nickel-based Alloy C-22 (UNS No. N06022) in some very aggressive environments, including concentrated calcium-chloride brines at elevated temperature. Two Fe-based amorphous metal formulations have been found that appear to have corrosion resistance comparable to, or better than that of Ni-based Alloy C-22, based on breakdown potential and corrosion rate. Both Cr and Mo provide corrosion resistance, B enables glass formation, and Y lowers critical cooling rate (CCR). SAM1651 has yttrium added, and has a nominal critical cooling rate of only 80 Kelvin per second, while SAM2X7 (similar to SAM2X5) has no yttrium, and a relatively high critical cooling rate of 610 Kelvin per second. Both amorphous metal formulations have strengths and weaknesses. SAM1651 (yttrium added) has a low critical cooling rate (CCR), which enables it to be rendered as a completely amorphous thermal spray coating. Unfortunately, it is relatively difficult to atomize, with powders being irregular in shape. This causes the powder to be difficult to pneumatically convey during thermal spray deposition. Gas atomized SAM1651 powder has required cryogenic milling to eliminate irregularities that make flow difficult. SAM2X5 (no yttrium) has a high critical cooling rate, which has caused problems associated with devitrification. SAM2X5 can be gas atomized to produce spherical powders of SAM2X5, which enable more facile thermal spray deposition. The reference material, nickel-based Alloy C-22, is an outstanding corrosion-resistant engineering material. Even so, crevice corrosion has been observed with C-22 in hot sodium chloride environments without buffer or inhibitor. Comparable metallic alloys such as SAM2X5 and SAM1651 may also experience crevice corrosion …
Date: September 20, 2007
Creator: Farmer, J.; Choi, J.; Haslam, J.; Day, S.; Yang, N.; Headley, T. et al.
Partner: UNT Libraries Government Documents Department
open access

FY05 HPCRM Annual Report: High-Performance Corrosion-Resistant Iron-Based Amorphous Metal Coatings Evaluation of Corrosion Reistance FY05 HPCRM Annual Report # Rev. 1DOE-DARPA Co-Sponsored Advanced Materials Program

Description: New corrosion-resistant, iron-based amorphous metals have been identified from published data or developed through combinatorial synthesis, and tested to determine their relative corrosion resistance. Many of these materials can be applied as coatings with advanced thermal spray technology. Two compositions have corrosion resistance superior to wrought nickel-based Alloy C-22 (UNS No. N06022) in some very aggressive environments, including concentrated calcium-chloride brines at elevated temperature. Two Fe-based amorphous metal formulations have been found that appear to have corrosion resistance comparable to, or better than that of Ni-based Alloy C-22, based on breakdown potential and corrosion rate. Both Cr and Mo provide corrosion resistance, B enables glass formation, and Y lowers critical cooling rate (CCR). SAM1651 has yttrium added, and has a nominal critical cooling rate of only 80 Kelvin per second, while SAM2X7 (similar to SAM2X5) has no yttrium, and a relatively high critical cooling rate of 610 Kelvin per second. Both amorphous metal formulations have strengths and weaknesses. SAM1651 (yttrium added) has a low critical cooling rate (CCR), which enables it to be rendered as a completely amorphous thermal spray coating. Unfortunately, it is relatively difficult to atomize, with powders being irregular in shape. This causes the powder to be difficult to pneumatically convey during thermal spray deposition. Gas atomized SAM1651 powder has required cryogenic milling to eliminate irregularities that make flow difficult. SAM2X5 (no yttrium) has a high critical cooling rate, which has caused problems associated with devitrification. SAM2X5 can be gas atomized to produce spherical powders of SAM2X5, which enable more facile thermal spray deposition. The reference material, nickel-based Alloy C-22, is an outstanding corrosion-resistant engineering material. Even so, crevice corrosion has been observed with C-22 in hot sodium chloride environments without buffer or inhibitor. Comparable metallic alloys such as SAM2X5 and SAM1651 may also experience crevice corrosion …
Date: September 19, 2007
Creator: Farmer, J. C.; Haslam, J. J. & Day, S. D.
Partner: UNT Libraries Government Documents Department
open access

200-BP-1 Prototype Hanford Barrier Annual Monitoring Report for Fiscal Years 2005 Through 2007

Description: A prototype Hanford barrier was deployed over the 216-B-57 Crib at the Hanford Site in 1994 to prevent percolation through the underlying waste and to minimize spreading of buried contaminants. This barrier is being monitored to evaluate physical and hydrologic performance at the field scale. This report summarizes data collected during the period FY 2005 through FY 2007. In FY 2007, monitoring of the prototype Hanford barrier focused on barrier stability, vegetative cover, evidence of plant and animal intrusion, and the main components of the water balance, including precipitation, runoff, storage, drainage, and deep percolation. Owing to a hiatus in funding in FY 2005 through 2006, data collected were limited to automated measurements of the water-balance components. For the reporting period (October 2004 through September 2007) precipitation amount and distribution were close to normal. The cumulative amount of water received from October 1994 through September 2007 was 3043.45 mm on the northern half of the barrier, which is the formerly irrigated treatment, and 2370.58 mm on the southern, non-irrigated treatments. Water storage continued to show a cyclic pattern, increasing in the winter and declining in the spring and summer to a lower limit of around 100 mm in response to evapotranspiration. The 600-mm design storage has never been exceeded. For the reporting period, the total drainage from the soil-covered plots ranged from near zero amounts under the soil-covered plots to almost 20 mm under the side slopes. Over the 13-yr monitoring period, side slope drainage accounted for about 20 percent of total precipitation while the soil-covered plots account for only 0.12 mm total. Above-asphalt and below-asphalt moisture measurements show no evidence of deep percolation of water. Topographic surveys show the barrier and protective side slopes to be stable. Plant surveys show a relatively high coverage of native plants still persists …
Date: February 1, 2008
Creator: Ward, Andy L.; Link, Steven O.; Strickland, Christopher E.; Draper, Kathryn E. & Clayton, Ray E.
Partner: UNT Libraries Government Documents Department
open access

FY04&05 LDRD Final Report Fission Fragment Sputtering

Description: Fission fragments born within the first 7 {micro}m of the surface of U metal can eject a thousand or more atoms per fission event. Existing data in the literature show that the sputtering yield ranges from 10 to 10,000 atoms per fission event near the surface, but nothing definitive is known about the energy of the sputtered clusters. Experimental packages were constructed allowing the neutron irradiation of natural uranium foils to investigate the amount of material removed per fission event and the kinetic energy distribution of the sputtered atoms. Samples were irradiated but were never analyzed after irradiation. Similar experiments were attempted in a non-radioactive environment using accelerator driven ions in place of fission induced fragments. These experiments showed that tracks produced parallel to the surface (and not perpendicular to the surface) are the primary source of the resulting particulate ejecta. Modeling studies were conducted in parallel with the experimental work. Because the reactor irradiation experiments were not analyzed, data on the energy of the resulting particulate ejecta was not obtained. However, some data was found in the literature on self sputtering of {sup 252}Cf that was used to estimate the velocity and hence the energy of the ejected particulates. Modeling of the data in the literature showed that the energy of the ejecta was much lower than had been anticipated. A mechanism to understand the nature of the ejecta was pursued. Initially it was proposed that the fission fragment imparts its momenta on the electrons which then impart their momenta on the nuclei. Once the nuclei are in motion, the particulate ejecta would result. This initial model was wrong. The error was in the assumption that the secondary electrons impart their momenta directly on the nuclei. Modeling and theoretical considerations showed that the secondary electrons scatter many times before …
Date: February 22, 2006
Creator: Ebbinghaus, B.; Trelenberg, T.; Meier, T.; Felter, T.; Sturgeon, J.; Kuboda, A. et al.
Partner: UNT Libraries Government Documents Department
open access

FY05 LDRD Final Report Mapping Phonons at High-pressure

Description: In order to shed light on the intriguing, and not yet fully understood fcc-isostructural {gamma} {yields} {alpha} transition in cerium, we have begun an experimental program aimed at the determination of the pressure evolution of the transverse acoustic (TA) and longitudinal acoustic (LA) phonon dispersions up to and above the transition. {gamma}-Ce Crystals of 60-80 mm diameter and 20 mm thickness were prepared from a large ingot, obtained from Ames Lab, using laser cutting, micro-mechanical and chemical polishing techniques. Three samples with a surface normal approximately oriented along the [110] direction were loaded into diamond anvil cells (DAC), using neon as a pressure transmitting medium. The crystalline quality was checked by rocking curve scans and typical values obtained ranged between one and two degrees. Only a slight degradation in the sample quality was observed when the pressure was increased to reach the {alpha}-phase, and data could be therefore recorded in this phase as well. The spectrometer was operated at 17794 eV in Kirkpatrick-Baez focusing geometry, providing an energy resolution of 3 meV and a focal spot size at the sample position of 30 x 60 mm{sup 2} (horizontal x vertical, FWHM). Eight to ten IXS spectra were typically recorded per phonon branch. Figure 1 reports the pressure dependence of the LA[100] branch in the {gamma}-phase for pressures of 1, 4 and 6 kbar, together with previous inelastic neutron scattering (INS) results [1] at ambient pressure. A clear decrease of the phonon energies with increasing pressure is observed for 1 and 4 kbar, whereas the phonon energies increase again at 6 kbar, still well within the stability field of the {gamma}-phase. Figure 2 reports the LA dispersion along all three main symmetry directions at 6 kbar ({gamma}-phase) and 8 kbar ({alpha}-phase), together with the INS results at ambient conditions. Besides the …
Date: February 10, 2006
Creator: Farber, D. L.; Antonangelli, D.; Beraud, A.; Krisch, M. & Aracne, C.
Partner: UNT Libraries Government Documents Department
open access

FY2005 AND FY2006 CORROSION SURVEILLANCE RESULTS FOR L BASIN

Description: This report documents the results of the L-Basin Corrosion Surveillance Program for the fiscal years 2005 and 2006. The water quality and basin conditions for the coupon immersion period are compared to the corrosion evaluation results from detailed metallurgical analysis of the coupons. Test coupons were removed from the basin on two occasions, March 29, 2005 and May 23, 2006, examined and photographed. Selected coupons were metallurgically characterized to evaluate the extent of general corrosion and pitting. Crystallographic and energy dispersive spectroscopy analysis were performed on a typical specimen, as-removed from the basin, to characterize the surface debris. Marked changes were noted in both the 2005 and 2006 specimens compared to previous years corrosion results. A new pitting incidence has occurred on the faces of the aluminum coupons compared to localized pitting at crevice regions only on specimens withdrawn in 2003 and 2004. The pitting incidence is attributed to sand filter fines that entered the basin on July 27, 2004 from an inadvertent backflush of the new sand filter. Pitting rate results show a trend of slowing down over time which is consistent with aluminum pit kinetics. Average pit growth rates were equal to or lower in all 2006 aluminum coupons than those removed in 2005. A trend line shows that pitting corrosion rates on Al1100, 6061, and 6063 coupons are slowing down since pit depth measurements were initiated in 2003. No impact to stored spent fuel is expected from the debris. The storage configuration of the majority of L-Basin spent fuel, in bundles, should provide a measure of isolation from debris settling in the basin.
Date: January 30, 2008
Creator: Vormelker, P & Cynthia Foreman, C
Partner: UNT Libraries Government Documents Department
open access

U.S. Global Health Assistance: FY2001-FY2019 Request

Description: This report outlines U.S. funding for global health by agency and program. Congress may debate several pressing global health issues, including strengthening health systems, bolstering pandemic preparedness, considering the FY2019 budget request, protecting life in global health assistance, and authorizing the extension of PEPFAR (President's Emergency Plan for AIDS Relief).
Date: June 22, 2018
Creator: Salaam-Blyther, Tiaji
Partner: UNT Libraries Government Documents Department
open access

NIH Funding: FY1994-FY2019

Description: This report discusses funding for the U.S. National Institutes of Health (NIH) from 1994 to 2019. The NIH is the primary federal agency charged with conducting and supporting biomedical and behavioral research. It is the largest of the eight health-related agencies that make up the Public Health Service (PHS) within the Department of Health and Human Services (HHS).
Date: October 15, 2018
Creator: Johnson, Judith A. & Sekar, Kavya
Partner: UNT Libraries Government Documents Department
open access

Brookhaven National Laboratory Institutional Plan FY2003-2007.

Description: This document presents the vision for Brookhaven National Laboratory (BNL) for the next five years, and a roadmap for implementing that vision. Brookhaven is a multidisciplinary science-based laboratory operated for the U.S. Department of Energy (DOE), supported primarily by programs sponsored by the DOE's Office of Science. As the third-largest funding agency for science in the U.S., one of the DOE's goals is ''to advance basic research and the instruments of science that are the foundations for DOE's applied missions, a base for U.S. technology innovation, and a source of remarkable insights into our physical and biological world, and the nature of matter and energy'' (DOE Office of Science Strategic Plan, 2000 http://www.osti.gov/portfolio/science.htm). BNL shapes its vision according to this plan.
Date: June 10, 2003
Partner: UNT Libraries Government Documents Department
open access

Appropriations for FY2005: Interior and Related Agencies

Description: This report is a guide to one of the 13 regular appropriations bills that Congress considers each year. It summarizes the status of the bill, its scope, major issues, funding levels, and related congressional activity, and is updated as events warrant. The Interior and related agencies appropriations bill includes funds for the Department of the Interior (DOI), except for the Bureau of Reclamation, and for some agencies and programs within the Departments of Agriculture, Energy, and Health and Human Services.
Date: March 9, 2005
Creator: Hardy Vincent, Carol & Boren, Susan
Partner: UNT Libraries Government Documents Department
open access

Water Infrastructure Financing: History of EPA Appropriations

Description: This report summarizes, in chronological order, congressional activity to fund items in the State and Tribal Assistance Grants (STAG) account since 1987. In appropriations legislation, funding for EPA (Environmental Protection Agency) wastewater assistance is contained in the measure providing funds for the Department of the Interior, Environment, and Related Agencies.
Date: January 19, 2006
Creator: Copeland, Claudia
Partner: UNT Libraries Government Documents Department
open access

Appropriations for FY2005: Interior and Related Agencies

Description: This report is a guide to one of the 13 regular appropriations bills that Congress considers each year, regarding the Department of the Interior and related agencies. It is designed to supplement the information provided by the House and Senate Appropriations Subcommittees on Interior and Related Agencies. It summarizes the status of the bill, its scope, major issues, funding levels, and related congressional activity, and is updated as events warrant.
Date: December 6, 2004
Creator: Vincent, Carol H. & Boren, Susan
Partner: UNT Libraries Government Documents Department
open access

Appropriations for FY2005: Foreign Operations, Export Financing, and Related Programs

Description: This report is a guide to one of the 13 regular appropriations bills that Congress considers each year, related to foreign operations, export financing and other programs. It is designed to supplement the information provided by the House and Senate Appropriations Subcommittees on Foreign Operations. It summarizes the status of the bill, its scope, major issues, funding levels, and related congressional activity, and is updated as events warrant.
Date: November 30, 2004
Creator: Nowels, Larry
Partner: UNT Libraries Government Documents Department
Back to Top of Screen