Search Results

open access

16-APR-03 Final Release of ENDF/B-V for use with LLNL Codes

Description: The new data files were prepared in two steps. First, the ENDF/B-V database was translated to an ENDL-format ascii database. The ENDL ascii format is a point-wise tabular storage scheme where intermediate values are extracted via interpolation. Sufficient point-wise information was generated in the translation to insure an extraction tolerance of 0.1% for most of the data. The only exception is along the incident neutron energy axis of the outgoing particle energy probability density function where a 0.5% tolerance was maintained. Second, processed files were generated from the translated database. Since the translated ENDF/B-V data is in ENDL-format, the standard processing codes were used to generate the new processed data files. To the best of our knowledge, these processed data files are accurate representations of the ENDF/B-V database to within the stated tolerances. However, there are several issues that users must be aware of and they are listed in this report.
Date: April 16, 2003
Creator: Hill, T S; McNabb, D P; Hedstrom, G W; Beck, B & Hagmann, C A
Partner: UNT Libraries Government Documents Department
open access

AN-102 Simulant Sr/TRU Precipitation and Ultrafiltration

Description: The objective of these tests was to gather data on performance of the single-tube crossflow ultrafilter unit to de-water the simulant precipitate derived from a project approved tank 241-AN-102 simulant. Upon completion of the objectives with the approved R1 simulant, the simulant specification was changed and additional work at modified precipitation conditions was requested.
Date: April 28, 2003
Creator: Zamecnik, J. R.
Partner: UNT Libraries Government Documents Department
open access

Abu Sayyaf: Target of Philippine-U.S. Anti-Terrorism Cooperation

Description: This report provides an overview and policy analysis of the Abu Sayyaf terrorist group in the Philippines and the Philippine-U.S. program of military cooperation against it. It examines the origins and operations of Abu Sayyaf, the efforts of the Philippine government and military to eliminate it, and the implications of a greater U.S. military role in attempts to suppress it.
Date: April 8, 2003
Creator: Niksch, Larry
Partner: UNT Libraries Government Documents Department
open access

Accelerator Based Neutron Beams for Neutron Capture Therapy

Description: The DOE-funded accelerator BNCT program at the Massachusetts Institute of Technology has resulted in the only operating accelerator-based epithermal neutron beam facility capable of generating significant dose rates in the world. With five separate beamlines and two different epithermal neutron beam assemblies installed, we are currently capable of treating patients with rheumatoid arthritis in less than 15 minutes (knee joints) or 4 minutes (finger joints) or irradiating patients with shallow brain tumors to a healthy tissue dose of 12.6 Gy in 3.6 hours. The accelerator, designed by Newton scientific Incorporated, is located in dedicated laboratory space that MIT renovated specifically for this project. The Laboratory for Accelerator Beam Applications consists of an accelerator room, a control room, a shielded radiation vault, and additional laboratory space nearby. In addition to the design, construction and characterization of the tandem electrostatic accelerator, this program also resulted in other significant accomplishments. Assemblies for generating epithermal neutron beams were designed, constructed and experimentally evaluated using mixed-field dosimetry techniques. Strategies for target construction and target cooling were implemented and tested. We demonstrated that the method of submerged jet impingement using water as the coolant is capable of handling power densities of up to 6 x 10(sup 7) W/m(sup 2) with heat transfer coefficients of 10(sup 6)W/m(sup 2)-K. Experiments with the liquid metal gallium demonstrated its superiority compared with water with little effect on the neutronic properties of the epithermal beam. Monoenergetic proton beams generated using the accelerator were used to evaluate proton RBE as a function of LET and demonstrated a maximum RBE at approximately 30-40 keV/um, a finding consistent with results published by other researchers. We also developed an experimental approach to biological intercomparison of epithermal beams and compared the RBE characteristics of the MIT Reactor M67 clinical beam, The Brookhaven Medical Research Reactor clinical …
Date: April 11, 2003
Creator: Yanch, Jacquelyn C.
Partner: UNT Libraries Government Documents Department
open access

Accurate Synchronization Between Short Laser Pulse and Electron Bunch by Using HGHG Output at 266nm as Photocathode Laser for RF Gun.

Description: Synchronization between seed laser pulse and electron bunch to below 50 fs is a critically important issue in carrying out cascading HGHG stages to achieve intense temporally coherent x-ray FEL. The single stage HGHG experiment in the IR and recently in UV region has achieved significant success. Hence the next step, to demonstrate the cascading of 2 stages of HGHG becomes crucially important in confirming the viability of this scheme. Based on our experiences at DUVFEL during the HGHG experiment, we can measure the time jitter between the electron bunch and the RF phase before compression to a high precision of order of 50 fs. Without the compression, this is equal to the time jitter between the laser and the RF phase. An analysis of this measurement suggests that it is possible to use a fast feedback system to reduce the jitter significantly. However, during the successful HGHG experiment at 266 nm recently, we realized that there is a simpler way to achieve highly accurate synchronization. Here we describe the method.
Date: April 1, 2003
Creator: Yu, L. H.
Partner: UNT Libraries Government Documents Department
open access

ACHIEVING NEW SOURCE PERFORMANCE STANDARDS (NSPS) EMISSION STANDARDS THROUGH INTEGRATION OF LOW-NOx BURNERS WITH AN OPTIMIZATION PLAN FOR BOILER COMBUSTION

Description: The objective of this project is to demonstrate the use of an Integrated Combustion Optimization System to achieve NO{sub x} emissions levels in the range of 0.15 to 0.22 lb/MMBtu while simultaneously enabling increased power output. The project consists of the integration of low-NO{sub x} burners and advanced overfire air technology with various process measurement and control devices on the Holcomb Station Unit 1 boiler. The project includes the use of sophisticated neural networks or other artificial intelligence technologies and complex software that can optimize several operating parameters, including NO{sub x} emissions, boiler efficiency, and CO emissions. The program is being performed in three phases. In Phase I, the boiler is being equipped with sensors that can be used to monitor furnace conditions and coal flow to permit improvements in boiler operation. In Phase II, the boiler will be equipped with burner modifications designed to reduce NO{sub x} emissions and automated coal flow dampers to permit on-line fuel balancing. In Phase III, the boiler will be equipped with an overfire air system to permit deep reductions in NO{sub x} emissions to be achieved. Integration of the overfire air system with the improvements made in Phases I and II will permit optimization of the boiler performance, output, and emissions. During this reporting period, efforts were focused on Phase I and Phase II activities. The furnace sensors were procured and installed in February 2003. Baseline testing was performed following the sensor installation. The low-NO{sub x} burner modifications, the coal flow dampers, and the coal flow monitoring system were procured and installed during a boiler outage in March 2003. Process design activities were performed to support design of the equipment installed and to develop specifications for the overfire air system. The overfire air system preliminary engineering design was initiated.
Date: April 1, 2003
Creator: Penrod, Wayne & Moyeda, David
Partner: UNT Libraries Government Documents Department
open access

Acoustic Detecting and Locating Gas Pipe Line Infringement Quarterly Report: Number 3

Description: The West Virginia University natural gas transmission line leak detection research is only considering using readily available 1/2 inch pipeline access ports for the detection of leak generated signals. The main problem with leak signals is the low signal to noise ratio. One of the acoustic signals associated with gas escaping through a leak is only temporary and is in the form of a rarefaction wave originating when the leak is formed. Due to pipeline friction, over distance such a step function transitions to a ramp function. The ability to identify a leak by pipeline monitoring and signal processing depends a great deal on the quality and signal to noise ratio of the characteristics of the detectors used. Combinations of sensing devices are being used for the WVU sensor package and are contained in a removable sensor housing. The four sensors currently installed are a 1/2 inch 3 Hz-40 Khz microphone, an audible range moving coil sensor, a piezo-electric pressure transducer, and the WVU designed floating 3 inch diameter diaphragm to detect flow transient induced pressure ramp type signals. The WVU diaphragm sensor, which is currently under development, uses the same diaphragm principle as a high quality capacitance type microphone, but utilizes aerodynamic signal amplification. This type of amplification only amplifies the ramp-signal itself, not the random pipeline noise.
Date: April 1, 2003
Creator: Loth, John L.; Morris, Gary J.; Palmer, George M.; Guiler, Richard & Mehra, Deepak
Partner: UNT Libraries Government Documents Department
open access

Active Cathodes for Super-High Power Density Solid Oxide Fuel Cells Through Space Charge Effects Quarterly Report: October 2002 - January 2003

Description: This report summarizes the work done during the first quarter of the project. Effort was directed in three areas: (1) The determination of the role of ionic conductor morphology, used in composite cathodes, on the ionic conductivity of the ionic conductor. It was shown that if the particles are not well sintered, the necks formed between particles will be very narrow, and the resulting conductivity will be too low (resistivity will be too high). Specifically, a mathematical equation was derived to demonstrate the singular nature of conductivity. (2) Nanosize powders of Sc-doped CeO{sub 2} were prepared by combustion synthesis. The rationale is that the particle size of the composite electrode must be as small as possible to ensure a high ionic conductivity--and resulting in high performance in fuel cells. Di-gluconic acid (DGA) was used as fuel. The process led to the formation of nanosize Sc-doped CeO{sub 2}. The powder was characterized by X-ray diffraction (XRD) and transmission electron microscopy (TEM). (3) Samples were sintered to form materials containing various levels of porosity, from {approx}3% to {approx}43%. Conductivity was measured over a range of temperatures by four probe DC method. It was observed that in highly porous samples, the conductivity was far lower than can be expected purely based on total porosity. The difference could be rationalized on the basis of the theoretical model developed.
Date: April 14, 2003
Creator: Virkar, Professor Anil V.
Partner: UNT Libraries Government Documents Department
open access

Advanced Cuttings Transport Study Quarterly Technical Report: January-March 2003

Description: Experiments on the flow loop are continuing. Improvements to the software for data acquisition are being made as additional experience with three-phase flow is gained. Modifications are being made to the Cuttings Injection System in order to improve control and the precision of cuttings injection. The design details for a drill-pipe Rotation System have been completed. A US Patent was filed on October 28, 2002 for a new design for an instrument that can generate a variety of foams under elevated pressures and temperatures and then transfer the test foam to a viscometer for measurements of viscosity. Theoretical analyses of cuttings transport phenomena based on a layered model is under development. Calibrations of two nuclear densitometers have been completed. Baseline tests have been run to determine wall roughness in the 4 different tests sections (i.e. 2-in, 3-in, 4-in pipes and 5.76-in by 3.5-in annulus) of the flow loop. Tests have also been conducted with aerated fluids at EPET conditions. Preliminary experiments on the two candidate aqueous foam formulations were conducted which included rheological tests of the base fluid and foam stability reports. These were conducted after acceptance of the proposal on the Study of Cuttings Transport with Foam Under Elevated Pressure and Elevated Temperature Conditions. Preparation of a test matrix for cuttings-transport experiments with foam in the ACTF is also under way. A controller for instrumentation to measure cuttings concentration and distribution has been designed that can control four transceivers at a time. A prototype of the control circuit board was built and tested. Tests showed that there was a problem with radiated noise. AN improved circuit board was designed and sent to an external expert to verify the new design. The new board is being fabricated and will first be tested with static water and gravel in an annulus …
Date: April 30, 2003
Creator: Reed, Troy; Miska, Stefan; Takach, Nicholas; Ashenayi, Kaveh; Pickell, Mark; Volk, Len et al.
Partner: UNT Libraries Government Documents Department
open access

Advanced Gasification-Based Fuel Conversion and Electric Energy Production System Progress Report

Description: The objective of this project is the development and commercial demonstration of an advanced biomass gasification-based power generation system at Boise Cascade Corporation's pulp and paper mill in DeRidder, Louisiana. The advanced power generation system is intended to meet the immediate needs of the forest products industry for highly efficient and environmentally friendly electricity and steam generation systems utilizing existing wood waste as the primary fuel resource. The novel system is based on three advanced technology components: GTI's RENUGAS{reg_sign} and 3-stage solid fuels combustion technologies coupled with one of the power generation approaches used in DOE's HIPPS program. Phase 1 of the project is a technical and economic evaluation of the system at the DeRidder site. A Continuation Application will be submitted at the conclusion of Phase 1 for authorization to proceed to testing and design in Phase 2. Phase 2 includes pilot-scale verification of selected system components and preparation of a detailed engineering design and cost estimate for retrofit of the advanced power system at the DeRidder mill. Phase 3 will complete procurement and construction of the system at the DeRidder site along with all required permitting activities. Phase 4 of the project will included plant commissioning, startup and demonstration operations. Design information for the Gasification Island was completed during the quarter. Two vendor quotations were received for the bark/hog fuel dryers. A final layout plan for the major equipment was developed and submitted to DeRidder for review and approval. The Institute of Paper Science and Technology (IPST) completed a subcontract for a laboratory study on VOC emissions from wood waste drying using bark from the DeRidder mill. Samples of DeRidder's lime mud and green liquor dregs were collected and analyzed in GTI's laboratory. It was determined that lime mud is far too fine to be utilized as inert …
Date: April 1, 2003
Creator: Rabovitser, Joseph & Bryan, Bruce
Partner: UNT Libraries Government Documents Department
open access

Advanced Hydrogen Transport Membranes for Vision 21 Fossil Fuel Plants

Description: Eltron Research Inc. and team members CoorsTek, Sued Chemie, and Argonne National Laboratory are developing an environmentally benign, inexpensive, and efficient method for separating hydrogen from gas mixtures produced during industrial processes, such as coal gasification. This project was motivated by the National Energy Technology Laboratory (NETL) Vision 21 initiative, which seeks to economically eliminate environmental concerns associated with the use of fossil fuels. Currently, this project is focusing on four basic categories of dense membranes: (i) mixed conducting ceramic/ceramic composites, (ii) mixed conducting ceramic/metal (cermet) composites, (iii) cermets with hydrogen permeable metals, and (iv) hydrogen permeable alloys. Ultimately, these materials must enable hydrogen separation at practical rates under ambient and high-pressure conditions, without deactivation in the presence of feedstream components such as carbon dioxide, water, and sulfur. This report describes resent results for long-term hydrogen permeation and chemical stability measurements, new mixed conducting cermets, progress in cermet, thin film, and thin-walled tube fabrication, hydrogen absorption measurements for selected compositions, and membrane facilitated alkane to olefin conversion.
Date: April 30, 2003
Creator: Roark, Shane E.; Sammells, Anthony F.; Mackay, Richard A.; Pitzman, Lyrik Y.; Zirbel, Thomas A.; Schesnack, Stewart et al.
Partner: UNT Libraries Government Documents Department
open access

ADVANCED, LOW/ZERO EMISSION BOILER DESIGN AND OPERATION

Description: This document reviews the work performed during the quarter January-March 2003. The main objectives of the project are: To demonstrate the feasibility of the full-oxy combustion with flue gas recirculation on Babcock & Wilcox's 1.5MW pilot boiler, To measure its performances in terms of emissions and boiler efficiency while selecting the right oxygen injection strategies, To perform an economical feasibility study, comparing this solution with alternate technologies, and To design a new generation, full oxy-fired boiler. The main objective of this quarter was to initiate the project, primarily the experimental tasks. The contractor and its subcontractors have defined a working plan, and the first tasks have been started. Task 1 (Site Preparation) is now in progress, defining the modifications to be implemented to the boiler and oxygen delivery system. The changes are required in order to overcome some current limitations of the existing system. As part of a previous project carried out in 2002, several changes have already been made on the pilot boiler, including the enrichment of the secondary and tertiary air with oxygen or the replacement of these streams with oxygen-enriched recycled flue gas. A notable modification for the current project involves the replacement of the primary air with oxygen-enriched flue gas. Consequently, the current oxygen supply and flue gas recycle system is being modified to meet this new requirement. Task 2 (Combustion and Emissions Performance Optimization) has been initiated with a preliminary selection of four series of tests to be performed. So far, the project schedule is on-track: site preparation (Task 1) should be completed by August 1st, 2003 and the tests (Task 2) are planned for September-October 2003. The Techno-Economic Study (Task 3) will be initiated in the following quarter.
Date: April 1, 2003
Creator: Marin, Ovidiu & Chatel-Pelage, Fabienne
Partner: UNT Libraries Government Documents Department
open access

ADVANCED TECHNOLOGIES FOR STRIPPER GAS WELL ENHANCEMENT

Description: As part of Task 1 in Advanced Technologies for Stripper Gas Well Enhancement, Schlumberger Data & Consulting Services (DCS) joined with two Appalachian Basin producers, Great Lakes Energy Partners, LLC, and Belden & Blake Corporation to develop methodologies for identification and enhancement of stripper wells with economic upside potential. These industry partners previously provided us with data for more than 700 wells in northwestern Pennsylvania. Phase 1 goals of this project are to develop and validate methodologies that can quickly and cost-effectively identify wells with enhancement potential. We have enhanced and streamlined our software, and we are using the final version of our new Microsoft{trademark} Access/Excel programs. During the last quarter of 2002, we received additional data for approximately 2,200 wells from Great Lakes. This information pertains to their Cooperstown field located in northwestern Pennsylvania. We recognized approximately 130 potential remediation candidates, and Great Lakes' personnel are currently reviewing this list for viable remediation. This field has provided a rigorous test of our software and analytical methods. We have processed all the information provided to us including the Cooperstown data. Great Lakes also provided supplemental data listing the original operator of the wells. We are also determining whether a statistically significant number of underperformers correlate to specific operators and/or their associated completion/stimulation methods. In addition, the DOE has reviewed a draft version of a final report.
Date: April 1, 2003
Creator: MacDonald, Ronald J.
Partner: UNT Libraries Government Documents Department
open access

ADVANCED TECHNOLOGIES FOR STRIPPER GAS WELL ENHANCEMENT

Description: As part of Task 1 in Advanced Technologies for Stripper Gas Well Enhancement, Schlumberger Data & Consulting Services (DCS) joined with two Appalachian Basin producers, Great Lakes Energy Partners, LLC, and Belden & Blake Corporation to develop methodologies for identification and enhancement of stripper wells with economic upside potential. These industry partners previously provided us with data for more than 700 wells in northwestern Pennsylvania. Phase 1 goals of this project are to develop and validate methodologies that can quickly and cost-effectively identify wells with enhancement potential. We have enhanced and streamlined our software, and we are using the final version of our new Microsoft{trademark} Access/Excel programs. During the last quarter of 2002, we received additional data for approximately 2,200 wells from Great Lakes. This information pertains to their Cooperstown field located in northwestern Pennsylvania. We recognized approximately 130 potential remediation candidates, and Great Lakes' personnel are currently reviewing this list for viable remediation. This field has provided a rigorous test of our software and analytical methods. We have processed all the information provided to us including the Cooperstown data. Great Lakes also provided supplemental data listing the original operator of the wells. We have determined whether a statistically significant number of underperformers correlate to specific operators and/or their associated completion/stimulation methods. In addition, the DOE has reviewed a draft version of a final report.
Date: April 4, 2003
Creator: MacDonald, Ronald J.
Partner: UNT Libraries Government Documents Department
open access

Advanced Technology for Predicting the Fluid Flow Attributes of Naturally Fractured Reservoirs From Quantitative Geologic Data and Modeling

Description: This report summarizes the work carried out during the period of September 29, 2000 to September 28, 2001 under DOE Research Contract No. DE-FC26-00BC15308. Our goal is to establish an integrated methodology of fractured reservoir characterization and show how that can be incorporated into fluid flow simulation. We have made progress in the characterization of mineral infilling of natural fractures. The main advancement in this regard was to recognize the strong interplay between diagenetic and mechanical processes. We accomplished several firsts in documenting and quantifying these processes, including documenting the range of emergent threshold in several formations and quantifying the internal structures of crack-seal bridges in fractures. These results will be the basis for an appreciation of fracture opening and filling rates that go well beyond our original goals. Looking at geochemical modeling of fracture infilling, our theoretical analysis addressed the problem of calcite precipitation in a fracture. We have built a model for the deposition of calcite within a fracture. The diagenetic processes of dissolution and partial cementation are key controls on the creation and distribution of natural fractures within hydrocarbon reservoirs. Even with extensive data collection, fracture permeability still creates uncertainty in reservoir description and the prediction of well performance. Data on the timing and stages of diagenetic events can provide explanation as to why, when and where natural fractures will be open and permeable. We have been pursuing the fracture mechanics testing of a wide range of rocks, particularly sandstone using a key rock property test that has hitherto not been widely applied to sedimentary rocks. A major accomplishment in this first year has been to identify sample suites available in the core repository at the University of Texas that represent a wide range of diagenetic alteration and to begin to test these samples. The basis for …
Date: April 1, 2003
Creator: Olson, Jon E.; Lake, Larry W. & Laubach, Steve E.
Partner: UNT Libraries Government Documents Department
open access

Afghanistan: Current Issues and U.S. Policy

Description: The United States and its allies are helping Afghanistan emerging from more than 22 years of warfare, although substantial risk to Afghan stability remains. Before the U.S. military campaign against the orthodox Islamist Taliban movement began on October 7, 2001, Afghanistan had been mired in conflict since the Soviet invasion of Afghanistan in 1979. The defeat of the Taliban has enabled the United States and its coalition partners to send forces throughout Afghanistan to search for Taliban and Al Qaeda fighters and leaders that remain at large, including Osama bin Laden. As the war against remaining Al Qaeda and Taliban elements winds down, the United States is shifting its military focus toward stabilizing the interim government, including training a new Afghan national army, and supporting the international security force (ISAF) that is helping the new government provide security.
Date: April 1, 2003
Creator: Katzman, Kenneth
Partner: UNT Libraries Government Documents Department
open access

Africa: U.S. Foreign Assistance Issues

Description: This report discusses the issue of U.S. economic assistance to sub-Saharan Africa, highlighting the importance of continued assistance in light of U.S. national security and also various U.S.-led efforts to promote reform amongst African citizens themselves. U.S. assistance finds its way to Africa through a variety of channels, including the USAID-administered DA program, food aid programs, and indirect aid provided through international financial institutions and the United Nations.
Date: April 11, 2003
Creator: Copson, Raymond W.
Partner: UNT Libraries Government Documents Department
open access

The African Union

Description: This report summaries the history of the African Union (AU) from the Organization of African unity (OAU) and the functionality of the AU. Specifically, the report claims that the main difference between the AU and the OAU is that the AU places more emphasis on economic growth and development.
Date: April 30, 2003
Creator: Cook, Nicholas
Partner: UNT Libraries Government Documents Department
open access

Agricultural Conservation: USDA Needs to Better Ensure Protection of Highly Erodible Cropland and Wetlands

Description: A letter report issued by the General Accounting Office with an abstract that begins "Annually, over a billion tons of soil erodes from the nation's cropland, and thousands of other acres, including wetlands, are converted to new cropland. Soil erosion reduces the land's productivity and impairs water quality; drained wetlands reduce flood control. Under the 1985 Food Security Act, farmers risk losing federal farm payments if they do not apply conservation practices to reduce erosion or if they drain wetlands. Concerns about soil erosion and wetlands conversions continue, however, as do concerns about the U.S. Department of Agriculture's (USDA) Natural Resources Conservation Service's implementation of these provisions. GAO reviewed field offices' and headquarters' implementation and enforcement of the 1985 act's conservation compliance provisions."
Date: April 21, 2003
Creator: United States. General Accounting Office.
Partner: UNT Libraries Government Documents Department
open access

Agricultural Export and Food Aid Programs

Description: This report discusses projected agricultural imports and exports for FY2003, as well as legislation that deals with federal programs in support of agricultural exports and federal aid dedicated to farms and agricultural reform.
Date: April 17, 2003
Creator: Hanrahan, Charles E.
Partner: UNT Libraries Government Documents Department
open access

Agricultural Trade Issues in the 108th Congress

Description: This report considers the value of U.S. agricultural exports. According to the report, these exports make up the equivalent of one fourth of the gross income of U.S. farmers. Moreover, the report lists a series of trade policies that the future of agriculture depends on.
Date: April 3, 2003
Creator: Hanrahan, Charles E.; Becker, Geoffrey S.; Jurenas, Remy & Schnepf, Randy
Partner: UNT Libraries Government Documents Department
open access

Ags Super Neutrino Beam Facility Accelerator and Target System Design (Neutrino Working Group Report-Ii).

Description: This document describes the design of the accelerator and target systems for the AGS Super Neutrino Beam Facility. Under the direction of the Associate Laboratory Director Tom Kirk, BNL has established a Neutrino Working Group to explore the scientific case and facility requirements for a very long baseline neutrino experiment. Results of a study of the physics merit and detector performance was published in BNL-69395 in October 2002, where it was shown that a wide-band neutrino beam generated by a 1 MW proton beam from the AGS, coupled with a half megaton water Cerenkov detector located deep underground in the former Homestake mine in South Dakota would be able to measure the complete set of neutrino oscillation parameters: (1) precise determination of the oscillation parameters {Delta}m{sub 32}{sup 2} and sin{sup 2} 2{theta}{sub 32}; (2) detection of the oscillation of {nu}{sub {mu}}-{nu}{sub e} and measurement of sin{sup 2} 2{theta}{sub 13}; (3) measurement of {Delta}m{sub 21}{sup 2} sin 2{theta}{sub 12} in a {nu}{sub {mu}} {yields} {nu}{sub e} appearance mode, independent of the value of {theta}{sub 13}; (4) verification of matter enhancement and the sign of {Delta}m{sub 32}{sup 2}; and (5) determination of the CP-violation parameter {delta}{sub CP} in the neutrino sector. This report details the performance requirements and conceptual design of the accelerator and the target systems for the production of a neutrino beam by a 1.0 MW proton beam from the AGS. The major components of this facility include a new 1.2 GeV superconducting linac, ramping the AGS at 2.5 Hz, and the new target station for 1.0 MW beam. It also calls for moderate increase, about 30%, of the AGS intensity per pulse. Special care is taken to account for all sources of proton beam loss plus shielding and collimation of stray beam halo particles to ensure equipment reliability and …
Date: April 21, 2003
Creator: Diwan, M.; Marciano, W.; Weng, W. & Raparia, D.
Partner: UNT Libraries Government Documents Department
open access

AIDS in Africa

Description: Sub-Saharan Africa has been far more severely affected by AIDS than any other part of the world. The United Nations reports that 29.4 million adults and children are infected with the HIV virus in the region, which has about 10% of the world's population but more than 70% of the worldwide total of infected people. This report discusses this issue in detail, including the cause of the African AIDS epidemic, the social and economic consequences, response and treatment, and U.S. policy.
Date: April 4, 2003
Creator: Copson, Raymond W.
Partner: UNT Libraries Government Documents Department
open access

AIDS in Africa

Description: Sub-Saharan Africa has been far more severely affected by AIDS than any other part of the world. The United Nations reports that 29.4 million adults and children are infected with the HIV virus in the region, which has about 10% of the world's population but more than 70% of the worldwide total of infected people. This report discusses this issue in detail, including the cause of the African AIDS epidemic, the social and economic consequences, response and treatment, and U.S. policy.
Date: April 24, 2003
Creator: Copson, Raymond W.
Partner: UNT Libraries Government Documents Department
Back to Top of Screen