Search Results

open access

1.5D Quasilinear Model for Alpha Particle-TAE Interaction in ARIES ACT-I

Description: We study the TAE interaction with alpha particle fusion products in ARIES ACT-I using the 1.5D quasilinear model. 1.5D uses linear analytic expressions for growth and damping rates of TAE modes evaluated using TRANSP pro les to calculates the relaxation of pressure pro les. NOVA- K simulations are conducted to validate the analytic dependancies of the rates, and to normalize their absolute value. The low dimensionality of the model permits calculating loss diagrams in large parameter spaces.
Date: January 30, 2013
Creator: Ghantous, K.; Gorelenkov, N. N.; Kessel, C. & Poli, F.
Partner: UNT Libraries Government Documents Department
open access

2-D and 3-D Elastic Modeling with Shared Seismic Models

Description: Several elastic models, both 2-D and 3-D, are being built for use in calculating synthetic elastic seismic data. The models will be made available to the research community, along with the synthetic data that are being calculated from them. These shared models have been proposed or contributed by participants in a collaborative industry, national laboratory, and university research project. The purpose of the modeling is to provide synthetic data to better understand elastic wave propagation and the effects of structural and stratigraphic complexities. The 2-D models are easier to design and change and synthetic calculations can be run relatively quickly in them. It will be possible to alter their layer properties and calculate time-lapse data sets from them. Field data will be available to accompany many of the 2-D models. 3-D models are more realistic, but more difficult to design and change. They also require considerably more computing resources to calculate synthetic data from them. A new 3-D model is being designed, and will be used for computing synthetic elastic data.
Date: April 30, 2002
Creator: House, L.; Marfurt, K. J.; Larsen, S. & Martin, G. S.
Partner: UNT Libraries Government Documents Department
open access

A 2-Liter, 2000 MPa Air Source for the Radiatively Driven Hypersonic Wind Tunnel

Description: The A2 LITE is a 2 liter, 2000 MPa, 750 K ultra-high pressure (UHP) vessel used to demonstrate UHP technology and to provide an air flow for wind tunnel nozzle development. It is the largest volume UHP vessel in the world. The design is based on a 100:1 pressure intensification using a hydraulic ram as a low pressure driver and a three-layer compound cylinder UHP section. Active control of the 900 mm piston stroke in the 63.5 mm bore permits pressure-time profiles ranging from static to constant pressure during flow through a 1 mm throat diameter nozzle for 1 second.
Date: May 30, 2002
Creator: Costantino, M & Lofftus, D
Partner: UNT Libraries Government Documents Department
open access

3.1.1.2 Feed Processing and Handling DL2 Final Report

Description: This milestone report is the deliverable for our Feed Processing and Handling project. It includes results of wet biomass feedstock analysis, slurry pumping information, fungal processing to produce a lignin-rich biorefinery residue and two subcontracted efforts to quantify the amount of wet biomass feedstocks currently available within the corn processing and paper processing industries.
Date: September 30, 2006
Creator: Elliott, Douglas C.; Magnuson, Jon K. & Wend, Christopher F.
Partner: UNT Libraries Government Documents Department
open access

A 3 TeV on 3 TeV proton-proton dedicated collider for Fermilab

Description: The Fermilab Dedicated Collider proposed in May 1983 is a 2 TeV on 2 TeV p)bar p) collider. The expected luminosity is )approximately) 10/sup 31/ cm/sup (minus/2)sec/sup )minus/1) and the estimated cost is )approximately) $362M (FY-83 dollars). Since 1983 both the superconducting magnet and the particle detector technologies have advanced and the countenance of physics, hence the desired characteristics of new facilities have also altered somewhat. We want to show here that with the new magnet technology used for the SSC one can construct a 3 TeV on 3 TeV pp collider on the Fermilab site. This pp Dedicated Collider )PPDC) will have a luminosity of about 10/sub 33/cm/sup )minus/2)sec)sup)minus)1) and a cost only )approximately) 50)percent) more than that of the p)bar p) Dedicated Collider. 3 figs
Date: March 30, 1988
Creator: Teng, L.C.
Partner: UNT Libraries Government Documents Department
open access

4-Coumarate 3-hydroxylase in the lignin biosynthesis pathway is a cytosolic ascorbate peroxidase

Description: Article describes an enzyme catalyzing the direct 3-hydroxylation of 4-coumarate to caffeate in lignin biosynthesis as a bifunctional peroxidase that oxidizes both ascorbate and 4-coumarate at comparable rates.
Date: April 30, 2019
Creator: Barros, Jaime; Escamilla-Treviño, Luis; Song, Luhua; Rao, Xiaolan; Serrani-Yarce, Juan Carlos; Palacios, Maite Docampo et al.
Partner: UNT College of Science
open access

4-D High-Resolution Seismic Reflection Monitoring of Miscible CO2 Injected into a Carbonate Reservoir

Description: The objective of this research project was to acquire, process, and interpret multiple high-resolution 3-D compressional wave and 2-D, 2-C shear wave seismic data in the hopes of observing changes in fluid characteristics in an oil field before, during, and after the miscible carbon dioxide (CO{sub 2}) flood that began around December 1, 2003, as part of the DOE-sponsored Class Revisit Project (DOE No.DE-AC26-00BC15124). Unique and key to this imaging activity is the high-resolution nature of the seismic data, minimal deployment design, and the temporal sampling throughout the flood. The 900-m-deep test reservoir is located in central Kansas oomoldic limestones of the Lansing-Kansas City Group, deposited on a shallow marine shelf in Pennsylvanian time. After 30 months of seismic monitoring, one baseline and eight monitor surveys clearly detected changes that appear consistent with movement of CO{sub 2} as modeled with fluid simulators and observed in production data. Attribute analysis was a very useful tool in enhancing changes in seismic character present, but difficult to interpret on time amplitude slices. Lessons learned from and tools/techniques developed during this project will allow high-resolution seismic imaging to be routinely applied to many CO{sub 2} injection programs in a large percentage of shallow carbonate oil fields in the midcontinent.
Date: June 30, 2007
Creator: Miller, Richard D.; Raef, Abdelmoneam E.; Byrnes, Alan P. & Harrison, William E.
Partner: UNT Libraries Government Documents Department
open access

A 5-cm dipole for the SSC-DE-1

Description: A 5cm SSC superconducting dipole that develops 6.6 tesla at 5790 A is proposed. The two layer magnet has 12% more transfer function than the present design as a result of using thin collars and close in'' iron. The thin collars provide precise positioning of the coils; they also provide minimum prestress (perhaps 2000 psi) as aid for magnet assembly. A welded skin around the iron provides the final prestress and shapes and the coil geometry. A prestressed aluminum bar placed between the vertically split iron yokes provides precise control of the gap between yokes halves and is designed to allow gap to close tightly during cooldown so that there is no decrease of prestress. In order to reduce the effect of iron saturation on the field multipoles the iron ID has been optimized to an elliptical shape. The coil inner layer is a 30 strand cable with 1.3:1 cu/sc. The outer layer is a 36 strand cable wit 1.8:1 cu/sc. At the operating field of 6.6 tesla the current density in the copper is 666 A/mm{sup 2} and 760 A/mm{sup 2} in the inner and outer layers respectively. The magnet short sample performance is limited by the inner layer. Operating at 4.35 K the maximum current and central field are 6896 A and 7.95 tesla. The calculated operating short sample temperature at 6.6 tesla and 5798 A is 5.17 K (0.82 K temperature margin). The magnet stored energy is 100.0 (KJ/m) at the 5790 A operating current. A mechanically similar 5cm bore two layer dipole for the cable test facility (D-16B-1) has been recently built and tested. The magnet had no collars and the iron was placed directly on the coil OD. The magnet's first quench was at 7 tesla with 6000 A and it reached 7.6 tesla at …
Date: April 30, 1990
Creator: Caspi, S.
Partner: UNT Libraries Government Documents Department
open access

8(a) Program: Fourteen Ineligible Firms Received $325 Million in Sole-Source and Set-Aside Contracts

Description: A letter report issued by the Government Accountability Office with an abstract that begins "The Small Business Administration (SBA) helps socially and economically disadvantaged small businesses gain access to federal contracting opportunities through its 8(a) program. To participate, firms must be at least 51 percent owned and controlled by an individual who meets SBA's criteria of socially and economically disadvantaged. The firm must also qualify as a small business. Once certified, 8(a) firms are eligible to receive sole-source and set-aside contracts for up to 9 years. GAO was asked to (1) determine whether ineligible firms are participating in the 8(a) program, (2) proactively test SBA's controls over the 8(a) application process, and (3) determine what vulnerabilities, if any, exist in SBA's fraud prevention system. To identify cases, GAO reviewed SBA data and complaints to GAO's fraud hotline. To perform its proactive testing, GAO created four bogus businesses and applied for 8(a) certification. GAO did not attempt to project the extent of fraud and abuse in the program."
Date: March 30, 2010
Creator: United States. Government Accountability Office.
Partner: UNT Libraries Government Documents Department
open access

10-75-kWe-reactor-powered organic Rankine-cycle electric power systems (ORCEPS) study. Final technical report

Description: This 10-75 kW(e) Reactor-ORCEPS study was concerned with the evaluation of several organic Rankine cycle energy conversion systems which utilized a /sup 235/U-ZrH reactor as a heat source. A liquid metal (NaK) loop employing a thermoelectric converter-powered EM pump was used to transfer the reactor energy to the organic working fluid. At moderate peak cycle temperatures (750/sup 0/F), power conversion unit cycle efficiencies of up to 25% and overall efficiencies of 20% can be obtained. The required operating life of seven years should be readily achievable. The CP-25 (toluene) working fluid cycle was found to provide the highest performance levels at the lowest system weights. Specific weights varies from 100 to 50 lb/kW(e) over the power level range 10 to 75 kW(e). (DLC)
Date: March 30, 1977
Partner: UNT Libraries Government Documents Department
open access

A 10 Hz Grazing Incidence pumped Ni-like Mo laser at 18.9 nm with 150 mJ pump energy

Description: The first demonstration of the grazing incidence pumping (GRIP) scheme for laser-driven x-ray lasers (XRLs) is described utilizing 2-pulse pumping. A long pulse is incident normal to the target to produce a plasma with a particular density profile. Then a short pulse is incident at a grazing angle, chosen to optimally couple the short pulse laser energy into the specific density region where the inversion process will occur. The short pulse is simultaneously absorbed and refracted at a maximum electron density specified by the chosen pump angle then turns back into the gain region. The increased path length gives improved absorption allowing a reduction in the drive energy required for lasing. A Ni-like Mo XRL at 18.9 nm has been demonstrated with only 150 mJ total pump energy and a repetition rate of 10 Hz. We report high gains of 60 cm{sup -1} and the achievement of gain saturation for targets of 4 mm length.
Date: September 30, 2004
Creator: Keenan, R.; Dunn, J.; Patel, P. K.; Price, D. F.; Smith, R. F. & Shlyaptsev, V. N.
Partner: UNT Libraries Government Documents Department
open access

50 kW on-site concentrating solar photovoltaic power system. Phase I: design. Final report, 1 June 1978-28 February 1979

Description: This contract is part of a three phase program to design, fabricate, and operate a solar photovoltaic electric power system with concentrating optics. The system will be located beside a Local Operating Headquarters of the Georgia Power Company in Atlanta, Georgia and will provide part of the power for the on-site load. Fresnel lens concentrators will be used in 2-axis tracking arrays to focus solar energy onto silicon solar cells producing a peak power output of 56 kW. The present contract covers Phase I which has as its objective the complete design of the system and necessary subsystems.
Date: March 30, 1979
Creator: Pittman, P. F.
Partner: UNT Libraries Government Documents Department
open access

60-day safety screen results and final report for tank 241-C-111, auger samples 95-Aug-002, 95-Aug-003, 95-Aug-016, and 95-Aug-017

Description: This report presents the details of the auger sampling events for underground waste tank C-111. The samples were shipped to the 222-S laboratories were they underwent safety screening analysis and primary ferricyanide analysis. The samples were analyzed for alpha total, total organic carbon, cyanide, Ni, moisture, and temperature differentials. The results of this analysis are presented in this document.
Date: May 30, 1995
Creator: Rice, A.D.
Partner: UNT Libraries Government Documents Department
Back to Top of Screen