Search Results

open access

Carbon fiber plates production for the CMS tracker outer barrel detector

Description: The production methods together with the achieved flatness and thickness of the composite support structures of the CMS tracker outer barrel (TOB) detector are presented. Possible areas of improvement in the process and in the materials used are also suggested.
Date: March 1, 2001
Creator: Lanfranco, Giobatta
Partner: UNT Libraries Government Documents Department
open access

Seismic Characterization of Coal-Mining Seismicity in Utah for CTBT Monitoring

Description: Underground coal mining (down to {approx}0.75 km depth) in the contiguous Wasatch Plateau (WP) and Book Cliffs (BC) mining districts of east-central Utah induces abundant seismicity that is monitored by the University of Utah regional seismic network. This report presents the results of a systematic characterization of mining seismicity (magnitude {le} 4.2) in the WP-BC region from January 1978 to June 2000-together with an evaluation of three seismic events (magnitude {le} 4.3) associated with underground trona mining in southwestern Wyoming during January-August 2000. (Unless specified otherwise, magnitude implies Richter local magnitude, M{sub L}.) The University of Utah Seismograph Stations (UUSS) undertook this cooperative project to assist the University of California Lawrence Livermore National Laboratory (LLNL) in research and development relating to monitoring the Comprehensive Test Ban Treaty (CTBT). The project, which formally began February 28, 1998, and ended September 1, 2000, had three basic objectives: (1) Strategically install a three-component broadband digital seismic station in the WP-BC region to ensure the continuous recording of high-quality waveform data to meet the long-term needs of LLNL, UUSS, and other interested parties, including the international CTBT community. (2) Determine source mechanisms--to the extent that available source data and resources allowed--for comparative seismic characterization of stress release in mines versus earthquakes in the WP-BC study region. (3) Gather and report to LLNL local information on mine operations and associated seismicity, including ''ground truth'' for significant events. Following guidance from LLNL's Technical Representative, the focus of Objective 2 was changed slightly to place emphasis on three mining-related events that occurred in and near the study area after the original work plan had been made, thus posing new targets of opportunity. These included: a magnitude 3.8 shock that occurred close to the Willow Creek coal mine in the Book Cliffs area on February 5, 1998 (UTC …
Date: March 1, 2001
Creator: Arabasz, W J & Pechmann, J C
Partner: UNT Libraries Government Documents Department
open access

Configuration Manual Polarized Proton Collider at RHIC

Description: In this report, the authors present their design to accelerate and store polarized protons in RHIC, with the level of polarization, luminosity, and control of systematic errors required by the approved RHIC spin physics program. They provide an overview of the physics to be studied using RHIC with polarized proton beams, and a brief description of the accelerator systems required for the project.
Date: March 1, 2001
Creator: Roser, T.; MacKay, W. W.; Alekseev, I.; Bai, M.; Brown, K.; Bunce, G. et al.
Partner: UNT Libraries Government Documents Department
open access

U.S. Energy Flow - 1999

Description: Lawrence Livermore National Laboratory (LLNL) has prepared similar flow charts of U.S. energy consumption since 1972. The chart follows the flow of individual fuels and compares these on the basis of a common energy unit of quadrillion British thermal units (Btu). A quadrillion, or ''quad,'' is 10{sup 15}. One Btu is the quantity of heat needed to raise the temperature of 1 pound of water by 1 F at or near 39.2 F. The width of each colored line across this chart is in proportion to the amount of quads conveyed. (Exception: lines showing extremely small amounts have been made wide enough to be clearly visible.) In most cases, the numbers used in this chart have been rounded to the nearest tenth of a quad, although the original data was published in hundredths or thousandths of a quad. As a consequence of independent rounding, some of the summary numbers may not appear to be a precise total of their various components. The first chart in this document uses quadrillion Btu's to conform with data from the U.S. Department of Energy's Energy Information Administration (EIA). However, the second chart is expressed in exajoules. A joule is the metric unit for heat. One Btu equals 1,055.06 joules; and one quadrillion Btu's equals 1.055 exajoules (an exajoule is 10{sup 18} joules).
Date: March 1, 2001
Creator: Kaiper, G V
Partner: UNT Libraries Government Documents Department
open access

Isotopic Tracers for Delineating Non-Point Source Pollutants in Surface Water

Description: This study tested whether isotope measurements of surface water and dissolved constituents in surface water could be used as tracers of non-point source pollution. Oxygen-18 was used as a water tracer, while carbon-14, carbon-13, and deuterium were tested as tracers of DOC. Carbon-14 and carbon-13 were also used as tracers of dissolved inorganic carbon, and chlorine-36 and uranium isotopes were tested as tracers of other dissolved salts. In addition, large databases of water quality measurements were assembled for the Missouri River at St. Louis and the Sacramento-San Joaquin Delta in California to enhance interpretive results of the isotope measurements. Much of the water quality data has been under-interpreted and provides a valuable resource to investigative research, for which this report exploits and integrates with the isotope measurements.
Date: March 1, 2001
Creator: Davisson, M L
Partner: UNT Libraries Government Documents Department
open access

NIF Inert Gas/Vacuum Management Prestart Review Phase 3 - Permit Spatial Filter Vacuum

Description: A Management Prestart Review (MPR) for the National Ignition Facility (NIF) vacuum testing of spatial filters, the Cavity Spatial Filter (CSF) and the Transport Spatial Filter (TSF), was conducted during March 2001. The review was performed to determine the readiness of the Beamline Infrastucture System (BIS) team and the Integration Management and Installation (IMI) contractor to start the vacuum testing of the components and assemblies that constitute the four CSF clusters and four TSF clusters in the NIF laser. This review assures that appropriate engineering, planning and management is in place to start this testing. Completion and acceptance of this report satisfies the LLNL requirement for MPRs to be conducted whenever a significant new risk is introduced into a project and is an essential part of the ISM work authorization process.
Date: March 1, 2001
Creator: Williams, J.; Beavers, T.; Bryan, S.; Hermes, G. & Patton, H.
Partner: UNT Libraries Government Documents Department
open access

Advances in understanding paternally transmitted Chromosomal Abnormalities

Description: Multicolor FISH has been adapted for detecting the major types of chromosomal abnormalities in human sperm including aneuploidies for clinically-relevant chromosomes, chromosomal aberrations including breaks and rearrangements, and other numerical abnormalities. The various sperm FISH assays have been used to evaluate healthy men, men of advanced age, and men who have received mutagenic cancer therapy. The mouse has also been used as a model to investigate the mechanism of paternally transmitted genetic damage. Sperm FISH for the mouse has been used to detect chromosomally abnormal mouse sperm, while the PAINT/DAPI analysis of mouse zygotes has been used to evaluate the types of chromosomal defects that can be paternally transmitted to the embryo and their effects on embryonic development.
Date: March 1, 2001
Creator: Marchetti, F; Sloter, E & Wyrobek, A J
Partner: UNT Libraries Government Documents Department
open access

Low Charge-State AMS for Biological Research

Description: University collaborations and internal research programs that trace isotopically labeled compounds in natural biological systems have grown significantly in the past few years. New research in molecular nutrition, protein sequencing, immunoassays, and toxicology now require hundreds to thousands of sample analyses per project. The goal of this effort was to strengthen this Laboratory and University health related research by the expansion of AMS access. This was achieved by our design and implementation of an AMS spectrometer that analyzes isotopic ions at lower energies in a more compact spectrometer without sacrificing precision or throughput. The decrease in ion energies is accompanied by a significant reduction in size and cost of the spectrometer. Our successful reduction in spectrometer cost, operation, and space will make this technology more appealing to research institutions, including industrial research centers. While others have also developed smaller spectrometers, these are limited in precision and throughput by the much lower intensities of ion beams that can be transmitted through them without differential loss of isotope species. The primary challenge in this project was mating the LLNL-designed high intensity negative ion source (Roberts, et al. 1994; Southon & Roberts, 2000) to available accelerator components and then showing that the precision and throughput would remain high enough to serve the research that needs large numbers of AMS analyses. The project also required reduction in operating complexity so that scientists and students would not require technical specialists to make their measurements. This report describes the experiments done to assure the needed spectrometer performance.
Date: March 1, 2001
Creator: Vogel, John S.; Ognibene, Theodore; Roberts, Mark; Brown, Thomas; Clifford, Andrew; Espinosa, Daniel et al.
Partner: UNT Libraries Government Documents Department
open access

Jet Perturbation by HE target

Description: We have previously reported the degree of attenuation and perturbation by a Cu jet passing through Comp B explosive. Similar tests have now been performed with high explosive (HE) targets having CJ pressures higher than and lower than the CJ pressure of Comp B. The explosives were LX-14 and TNT, respectively. We found that the measured exit velocity of the jet where it transitions from perturbed to solid did not vary significantly as a function of HE type for each HE thickness. The radial momentum imparted to the perturbed jet segment did vary as a function of HE type, however, and we report the radial spreading of the jet and the penetration of a downstream target as a function of HE type and thickness.
Date: March 1, 2001
Creator: Poulsen, P & Kuklo, R M
Partner: UNT Libraries Government Documents Department
open access

Hanford Site Groundwater Monitoring for Fiscal Year 2000

Description: This report presents the results of groundwater and vadose zone monitoring and remediation for fiscal year 2000 on the U.S. Department of Energy's Hanford Site, Washington. The most extensive contaminant plumes are tritium, iodine-129, and nitrate, which all had multiple sources and are very mobile in groundwater. Carbon tetrachloride and associated organic constituents form a relatively large plume beneath the central part of the Site. Hexavalent chromium is present in smaller plumes beneath the reactor areas along the river and beneath the central part of the site. Strontium-90 exceeds standards beneath each of the reactor areas, and technetium-99 and uranium are present in the 200 Areas. RCRA groundwater monitoring continued during fiscal year 2000. Vadose zone monitoring, characterization, remediation, and several technical demonstrations were conducted in fiscal year 2000. Soil gas monitoring at the 618-11 burial ground provided a preliminary indication of the location of tritium in the vadose zone and in groundwater. Groundwater modeling efforts focused on 1) identifying and characterizing major uncertainties in the current conceptual model and 2) performing a transient inverse calibration of the existing site-wide model. Specific model applications were conducted in support of the Hanford Site carbon tetrachloride Innovative Treatment Remediation Technology; to support the performance assessment of the Immobilized Low-Activity Waste Disposal Facility; and in development of the System Assessment Capability, which is intended to predict cumulative site-wide effects from all significant Hanford Site contaminants.
Date: March 1, 2001
Creator: Hartman, Mary J.; Morasch, Launa F. & Webber, William D.
Partner: UNT Libraries Government Documents Department
open access

Techni-Cast: Foundry Saves Energy with Compressed Air System Retrofit

Description: In 2002, Techni-Cast improved its compressed air system at its foundry in Southgate, California. The project allowed the foundry to reduce its compressor capacity by 50%, which greatly reduced the foundry's energy and maintenance costs. The annual energy and maintenance savings from the project implementation are 242,000 kWh and $24,200, and the projects cost was $38,000. Because the plant received a $10,000 incentive payment from the California Public Utilities Commission, the total project cost was reduced to $28,000, yielding a 14-month simple payback.
Date: March 1, 2001
Partner: UNT Libraries Government Documents Department
open access

Initial Performance of the Keck AO Wavefront Controller System

Description: The wavefront controller for the Keck Observatory AO system consists of two separate real-time control loops: a tip-tilt control loop to remove tilt from the incoming wavefront, and a deformable mirror control loop to remove higher-order aberrations. In this paper, we describe these control loops and analyze their performance using diagnostic data acquired during the integration and testing of the AO system on the telescope. Disturbance rejection curves for the controllers are calculated from the experimental data and compared to theory. The residual wavefront errors due to control loop bandwidth are also calculated from the data, and possible improvements to the controller performance are discussed.
Date: March 1, 2001
Creator: Johansson, E. M.; Acton, D. S.; An, J. R.; Avicola, K.; Beeman, B. V.; Brase, J. M. et al.
Partner: UNT Libraries Government Documents Department
captions transcript

[News Clip: Cancer block]

Description: Video footage from the KXAS-TV/NBC station in Fort Worth, Texas, to accompany a news story.
Date: March 1, 2001, 4:00 p.m.
Duration: 52 seconds
Creator: KXAS-TV (Television station : Fort Worth, Tex.)
Partner: UNT Libraries Special Collections
open access

A Search for the Higgs Boson Using Very Forward Tracking Detectors with CDF

Description: The authors propose to add high precision track detectors 55 m downstream on both (E and W) sides of CDF, to measure high Feynman-x protons and antiprotons in association with central states. A primary motivation is to search for the Higgs boson, and if it is seen to measure its mass precisely. The track detectors will be silicon strip telescopes backed up by high resolution time-of-flight counters. They will have four spectrometer arms, for both sides of the p and {bar p} beams. The addition of these small detectors effectively converts the Tevatron into a gluon-gluon collider with {radical}s from 0 to {approx} 200 GeV. This experiment also measures millions/year clean high- |t| elastic p{bar p} scattering events and produce millions of pure gluon jets. Besides a wealth of other unique QCD studies they will search for signs of exotic physics such as SUSY and Large Extra Dimensions. They ask the Director to ask the PAC to take note of this Letter of Intent at its April meeting, to consider a proposal at the June meeting and to make a decision at the November 2001 meeting. They request that the Directorage ask the Beams Division to evaluate the consequences and cost of the proposed Tevatron modifications, and CDF to evaluate any effect on its baseline program and to review the technical aspects of the detectors, DAQ and trigger integration.
Date: March 1, 2001
Creator: Albrow, M. G.; Atac, M.; Booth, P.; Crosby, P.; Dunietz, I.; Finley, D. A. et al.
Partner: UNT Libraries Government Documents Department
open access

Indoor Air Nuclear, Biological, and Chemical Health Modeling and Assessment System

Description: Indoor air quality effects on human health are of increasing concern to public health agencies and building owners. The prevention and treatment of 'sick building' syndrome and the spread of air-borne diseases in hospitals, for example, are well known priorities. However, increasing attention is being directed to the vulnerability of our public buildings/places, public security and national defense facilities to terrorist attack or the accidental release of air-borne biological pathogens, harmful chemicals, or radioactive contaminants. The Indoor Air Nuclear, Biological, and Chemical Health Modeling and Assessment System (IA-NBC-HMAS) was developed to serve as a health impact analysis tool for use in addressing these concerns. The overall goal was to develop a user-friendly fully functional prototype Health Modeling and Assessment system, which will operate under the PNNL FRAMES system for ease of use and to maximize its integration with other modeling and assessment capabilities accessible within the FRAMES system (e.g., ambient air fate and transport models, water borne fate and transport models, Physiologically Based Pharmacokinetic models, etc.). The prototype IA-NBC-HMAS is designed to serve as a functional Health Modeling and Assessment system that can be easily tailored to meet specific building analysis needs of a customer. The prototype system was developed and tested using an actual building (i.e., the Churchville Building located at the Aberdeen Proving Ground) and release scenario (i.e., the release and measurement of tracer materials within the building) to ensure realism and practicality in the design and development of the prototype system. A user-friendly "demo" accompanies this report to allow the reader the opportunity for a "hands on" review of the prototype system's capability.
Date: March 1, 2001
Creator: Stenner, Robert D.; Hadley, Donald L.; Armstrong, Peter R.; Buck, John W.; Hoopes, Bonnie L. & Janus, Michael C.
Partner: UNT Libraries Government Documents Department
open access

Federal Technology Alert: Ground-Source Heat Pumps Applied to Federal Facilities--Second Edition

Description: This Federal Technology Alert, which was sponsored by the U.S. Department of Energy's Office of Federal Energy Management Programs, provides the detailed information and procedures that a Federal energy manager needs to evaluate most ground-source heat pump applications. This report updates an earlier report on ground-source heat pumps that was published in September 1995. In the current report, general benefits of this technology to the Federal sector are described, as are ground-source heat pump operation, system types, design variations, energy savings, and other benefits. In addition, information on current manufacturers, technology users, and references for further reading are provided.
Date: March 1, 2001
Creator: Hadley, Donald L.
Partner: UNT Libraries Government Documents Department
open access

Southern Idaho Wildlife Mitigation Implementation 2000 Annual Report.

Description: This report covers calendar year 2000 activities for the Southern Idaho Wildlife Mitigation Implementation project. This project, implemented by Idaho Department of Fish and Game and Shoshone Bannock Tribes wildlife mitigation staff, is designed to protect, enhance and maintain wildlife habitats to mitigate construction losses for Palisades, Anderson Ranch, Black Canyon and Minidoka hydroelectric projects. Additional project information is available in the quarterly reports.
Date: March 1, 2001
Creator: Bottum, Edward & Mikkelsen, Anders
Partner: UNT Libraries Government Documents Department
open access

Habitat Evaluation Procedures (HEP) Report; Big Island - The McKenzie River, Technical Report 1998-2001.

Description: The Big Island site is located in the McKenzie River flood plain, containing remnant habitats of what was once more common in this area. A diverse array of flora and fauna, representing significant wildlife habitats, is present on the site. Stands of undisturbed forested wetlands, along with riparian shrub habitats and numerous streams and ponds, support a diversity of wildlife species, including neotropical migratory songbirds, raptors, mammals, reptiles, and amphibians (including two State-listed Sensitive Critical species). The project is located in eastern Springfield, Oregon (Figure 1). The project area encompasses 187 acres under several ownerships in Section 27 of Township 17S, Range 2W. Despite some invasion of non-native species, the site contains large areas of relatively undisturbed wildlife habitat. Over several site visits, a variety of wildlife and signs of wildlife were observed, including an active great blue heron rookery, red-Legged frog egg masses, signs of beaver, and a bald eagle, Wildlife habitat values resulting from the purchase of this site will contribute toward the goal of mitigating for habitat lost as outlined in the Bonneville Power Administration's (BPA) Mitigation and Enhancement Plan for the Willamette River Basin. Under this Plan, mitigation goals and objectives were developed as a result of the loss of wildlife habitat due to the construction of Federal hydroelectric facilities in the Willamette River Basin. Results of the Habitat Evaluation Procedures (HEP) will be used to: (1) determine the current habitat status of the study area and habitat enhancement potential of the site consistent with wildlife mitigation goals and objectives; and (2) develop a management plan for the area.
Date: March 1, 2001
Creator: Sieglitz, Greg
Partner: UNT Libraries Government Documents Department
open access

Calendar Life Studies of Advanced Technology Development Program Gen 1 Lithium Ion Batteries

Description: This report presents the test results of a special calendar-life test conducted on 18650-size, prototype, lithium-ion battery cells developed to establish a baseline chemistry and performance for the Advanced Technology Development Program. As part of electrical performance testing, a new calendar-life test protocol was used. The test consisted of a once-per-day discharge and charge pulse designed to have minimal impact on the cell yet establish the performance of the cell over a period of time such that the calendar life of the cell could be determined. The calendar life test matrix included two states of charge (i.e., 60 and 80%) and four temperatures (40, 50, 60, and 70°C). Discharge and regen resistances were calculated from the test data. Results indicate that both discharge and regen resistance increased nonlinearly as a function of the test time. The magnitude of the discharge and regen resistance depended on the temperature and state of charge at which the test was conducted. The calculated discharge and regen resistances were then used to develop empirical models that may be useful to predict the calendar life or the cells.
Date: March 1, 2001
Creator: Wright, Randy Ben & Motloch, Chester George
Partner: UNT Libraries Government Documents Department
open access

Automated Sorting of Transuranic Waste

Description: The HANDSS-55 Transuranic Waste Sorting Module is designed to sort out items found in 55-gallon drums of waste as determined by an operator. Innovative imaging techniques coupled with fast linear motor-based motion systems and a flexible end-effector system allow the operator to remove items from the waste stream by a touch of the finger. When all desired items are removed from the waste stream, the remaining objects are automatically moved to a repackaging port for removal from the glovebox/cell. The Transuranic Waste Sorting Module consists of 1) a high accuracy XYZ Stereo Measurement and Imaging system, 2) a vibrating/tilting sorting table, 3) an XY Deployment System, 4) a ZR Deployment System, 5) several user-selectable end-effectors, 6) a waste bag opening system, 7) control and instrumentation, 8) a noncompliant waste load-out area, and 9) a Human/Machine Interface (HMI). The system is modular in design to accommodate database management tools, additional load-out ports, and other enhancements. Manually sorting the contents of a 55-gallon drum takes about one day per drum. The HANDSS-55 Waste Sorting Module is designed to significantly increase the throughput of this sorting process by automating those functions that are strenuous and tiresome for an operator to perform. The Waste Sorting Module uses the inherent ability of an operator to identify the items that need to be segregated from the waste stream and then, under computer control, picks that item out of the waste and deposits it in the appropriate location. The operator identifies the object by locating the visual image on a large color display and touches the image on the display with his finger. The computer then determines the location of the object, and performing a highspeed image analysis determines its size and orientation, so that a robotic gripper can be deployed to pick it up. Following operator …
Date: March 1, 2001
Creator: Shurtliff, Rodney Marvin
Partner: UNT Libraries Government Documents Department
open access

Remote Laser Diffraction Particle Size Distribution Analyzer

Description: In support of a radioactive slurry sampling and physical characterization task, an “off-the-shelf” laser diffraction (classical light scattering) particle size analyzer was utilized for remote particle size distribution (PSD) analysis. Spent nuclear fuel was previously reprocessed at the Idaho Nuclear Technology and Engineering Center (INTEC—formerly recognized as the Idaho Chemical Processing Plant) which is on DOE’s INEEL site. The acidic, radioactive aqueous raffinate streams from these processes were transferred to 300,000 gallon stainless steel storage vessels located in the INTEC Tank Farm area. Due to the transfer piping configuration in these vessels, complete removal of the liquid can not be achieved. Consequently, a “heel” slurry remains at the bottom of an “emptied” vessel. Particle size distribution characterization of the settled solids in this remaining heel slurry, as well as suspended solids in the tank liquid, is the goal of this remote PSD analyzer task. A Horiba Instruments Inc. Model LA-300 PSD analyzer, which has a 0.1 to 600 micron measurement range, was modified for remote application in a “hot cell” (gamma radiation) environment. This technology provides rapid and simple PSD analysis, especially down in the fine and microscopic particle size regime. Particle size analysis of these radioactive slurries down in this smaller range was not previously achievable—making this technology far superior than the traditional methods used. Successful acquisition of this data, in conjunction with other characterization analyses, provides important information that can be used in the myriad of potential radioactive waste management alternatives.
Date: March 1, 2001
Creator: Batcheller, Thomas Aquinas; Huestis, Gary Michael & Bolton, Steven Michael
Partner: UNT Libraries Government Documents Department
open access

INEEL BNCT Research Program Annual Report, CY-2000

Description: This report is a summary of the activities conducted in conjunction with the Idaho National Engineering and Environmental Laboratory (INEEL) Boron Neutron Capture Therapy (BNCT) Research Program for calendar year 2000. Applications of supportive research and development, as well as technology deployment in the fields of chemistry, radiation physics and dosimetry, neutron source design and demonstration, and support the Department of Energy’s (DOE) National BNCT Program goals are the goals of this Program. Contributions from the individual contributors about their projects are included, specifically described are the following, chemistry: analysis of biological samples and an infrared blood-boron analyzer, and physics: progress in the patient treatment planning software, measurement of neutron spectra for the Argentina RA-6 reactor, and recalculation of the Finnish research reactor FiR 1 neutron spectra, BNCT accelerator technology, and modification to the research reactor at Washington State University for an epithermal-neutron beam.
Date: March 1, 2001
Creator: Venhuizen, James Robert
Partner: UNT Libraries Government Documents Department
open access

Building Safer Communities: The Integrated Community Safety Approach

Description: This paper discusses an integrated community safety approach to creating safer communities. It defines community broadly to include two categories of community members: “industry” and “neighbors.” Potential community members within the “industry” category include facilities, government/regulators, customers, stockholders, and suppliers. Within the “neighbors” category are towns, cities, counties, states; people/commodity flow systems; news media and special interest groups; environment; and families of employees. Each of these potential community members and its characteristics are discussed. The integrated community safety approach consists of three major activities: (1) define the boundaries of the community; (2) facilitate the sense of community; and (3) address the needs of the community. Defining the boundaries of the community includes determining the geographical and social boundaries; this is accomplished through conducting a hazard analysis and community involvement to identify all of the community members. Facilitating the sense of community includes conducting a capability/needs assessment and continuing community involvement to identify the issues and concerns of community members. Addressing the needs of the community involves master planning to consider safety issues in all community development actions and continuing community education and involvement. The integrated community safety approach is a workable approach for existing industries and their neighbors as well as new projects that industries and their neighbors might be considering. By using this socio-technical approach to integrating industry and all of its neighbors into a safer community, the integrated community safety approach will better assure the viability and safety of industry and its neighbors while maintaining or improving the overall quality of life.
Date: March 1, 2001
Creator: Fawcett, Ricky Lee; Kerr, Thomas A & Jordan, Steven Albert
Partner: UNT Libraries Government Documents Department
Back to Top of Screen