43 Matching Results

Search Results

Results: 1 - 24 next
open access

Transistorized Pulse Counting Equipment

Description: This instrument was designed primarily to meet the need for radiation monitoring equipment in chemical process areas where corrosive vapors exist.
Date: July 26, 1960
Creator: Henry, John J.
Partner: UNT Libraries Government Documents Department
open access

Interim Report of Nuclear Analysis Performed on SM-2 Core and Vessel : September 1, 1958 to December 31, 1959.

Description: Abstract: This technical report contains a description of the nuclear analysis performed upon the SM-2 core and vessel for the period September 1, 1958 to December 31, 1959. Calculations are given for core reactivity, power distributions, lifetime, reactor control, kinetics, radiation problems, fuel and poison burn-ups, and the nuclear effects of poisons, temperature, and geometry. Wherever possible, experimental data is included in order to test the validity of the analytical models. The SM-… more
Date: May 27, 1960
Creator: Bobe, P. E.; Birken, S. H.; Byrne, B. J.; Clancy, E. F. & Fried, B. E.
Partner: UNT Libraries Government Documents Department
open access

Scale "Up or Down" Analysis for Prototype Test

Description: Introduction: In conjunction with the final design and development of a 70 MW sodium intermediate heat exchanger and a sodium steam generator, an analysis is required which can be used as a basis for a determination to scale up or scale down the designs. Included in this analysis are those considerations leading to the recommendation of the best prototype test unit and to some of the limits imposed on scaling up or down when considering future applications of designs other than those actually … more
Date: May 1, 1960
Creator: Alco Products (Firm).
Partner: UNT Libraries Government Documents Department
open access

Analysis of Zero Power Experiments on SM-1 Core II and SM-1A Core I

Description: Abstract: An analysis of SM-1 Core II and SM-1A Core I zero power experiments was made by comparing these cores to each other and to AM-1 Core I on the basis of critical bank positions, bank calibrations and available chemical analyses of the fuel plate compositions. The effects of replacing boron absorbers by europium absorbers upon rod worth and stuck rod conditions were studied. Comparisons of measured and calculated power distributions were made. It was concluded that both SM-1 Core II an… more
Date: October 5, 1960
Creator: Paluszkiewicz, S.
Partner: UNT Libraries Government Documents Department
open access

Intermediate Heat Exchanger and Steam Generator Final Design. Volume 1. Thermal & Mechanical Design

Description: This technical report represents the final design for a sodium to sodium intermediate heat exchanger and a sodium to water steam generator. The intermediate heat exchanger is designed for operation in a nuclear power plant using liquid sodium as the primary and secondary coolant. Since the primary fluid coming fro the reactor is radioactive, the purpose of the IHX is to transfer heat to a nonradioactive fluid which then goes to the steam generator. Because of radioactivity the unit will be encl… more
Date: September 30, 1960
Creator: Alco Products (Firm).
Partner: UNT Libraries Government Documents Department
open access

Intermediate Heat Exchanger and Steam Generator Final Design. Volume 2. Chemical & Stress Analysis

Description: Introduction: This volume deals principally with the chemical analysis and the stress analysis for a sodium to sodium intermediate heat exchanger and a sodium to water steam generator. The work presented is an extension and modification of the analysis presented in the preliminary design report. The chemical analysis covers the sodium cover gas system and the effects of sodium-water reactions in the event of a leak in the steam generator. Considerable design work was done in an effort to mainta… more
Date: September 30, 1960
Creator: Alco Products (Firm).
Partner: UNT Libraries Government Documents Department
open access

Intermediate Heat Exchanger and Steam Generator Final Design. Volume 3. Specifications

Description: Introduction: Sodium Components Material Specifications. Twenty-three material, inspection and welding specification are presented for the various parts of both the intermediate heat exchanger and steam generator. Tables indicate the applicable parts and assemblies to which these specifications shall apply. For other parts, where the material requirements are not severe, the ASTM or other indicated specifications shall apply.
Date: September 30, 1960
Creator: Alco Products (Firm).
Partner: UNT Libraries Government Documents Department
open access

Intermediate Heat Exchanger and Steam Generator Final Design. Volume 4. Operation & Maintenance

Description: This technical report contains the operation and maintenance specifications for the intermediate heat exchanger and the steam generator. The report contains eight sections: (1) General Information, (2) Shipping and Installation, (3) Operation Procedures, (4) Scram and Casualty Shutdowns, (5) Leaks, (6) Instrumentation and Control, (7) Maintenance, and (8) four Appendixes (a) Boiler Water Chemistry Recommendations, (b) Final Concept Drawings, (c) Industrial Nucleonics Literature on Liquid Level… more
Date: September 30, 1960
Creator: Alco Products (Firm).
Partner: UNT Libraries Government Documents Department
open access

SM-1 Reactor Core Inspection at 2/3 Core Life : March 7, 1959 to May 17, 1959

Description: Abstract: This technical report is concerned with the program and results of the SM-1 reactor vessel head removal and core inspection at Fort Belvoir, Virginia from the period March 7, 1969 to May 17, 1959. It covers the operating procedures in detail and records the conditions found and problems encountered in order to make a record for reference in future work of this nature. The major objective of the program, to obtain irradiation data on the SM-1 type core, has been met. The boron contro… more
Date: January 13, 1960
Creator: Obrist, C. H.; Byrne, B. J.; Connolly, T. F.; Foley, D. D.; Lichtenberger, R. V.; Mackay, S. D. et al.
Partner: UNT Libraries Government Documents Department
open access

DuPont Prototype Safety and Control Rod Drive Testing

Description: Summary: Prototype testing of the safety and control rod drives indicated that both units functioned properly. No major problems were encountered during testing. Seal leakage data collected indicated that the seal units were performing satisfactorily. Scram times during both cold and hot testing were excellent and actually better than expected.
Date: April 25, 1960
Creator: VandeMark, G. M. & Krause, P. S.
Partner: UNT Libraries Government Documents Department
open access

A Survey of the Effects of Neutron Irradiation on the Impact and Other Mechanical Properties of Pressure Vessel Steels for the SM-2 Reactor

Description: Abstract: This technical report summarizes the data obtained in a recent literature survey conducted to determine the effects of neutron irradiation on the impact and other mechanical properties of both ferritic steels and austenitic stainless steels. The survey was primarily aimed at obtaining sufficient data on the behavior of pressure vessel steels at high integrated neutron flux levels in order that a reference material of construction could be selected for the SM-2 (APPR-1B) reactor vesse… more
Date: April 1, 1960
Creator: Kelleman, Richard William.
Partner: UNT Libraries Government Documents Department
open access

Control and Dynamics Performance of a Sodium Cooled Reactor Power System

Description: Introduction: Objectives and Method of Approach. High plant efficiencies can be realized without excessively high core temperatures and high coolant pressures by the use of liquid metal coolant. In an attempt to prove the feasibility of liquid sodium as a reactor coolant ALCO Products, Inc., under sponsorship of the Atomic Energy Commission, is undertaking a design study of three vital system components: the intermediate exchanger, the boiler, and the superheater. Since, in the past programs,… more
Date: 1960
Creator: Alco Products (Firm).
Partner: UNT Libraries Government Documents Department
open access

Hazards Summary Report for the Army Package Power Reactor : SM-1, Task XVII

Description: Preface. This technical report is an updated and revised version of the original SM-1 (APPR-1) Hazards Summary Report. The original report was issued July 1955, almost two years before construction of the SM-1 plant was completed. During that time interval there were numerous design changes. Consequently, the original report does not accurately describe the plant as built. This revision is written after the SM-1 has been operated 3 years. It describes the as-build plant and includes plant mo… more
Date: May 1960
Creator: Rosen, S. S.
Partner: UNT Libraries Government Documents Department
open access

The ML-1 Design Report

Description: From abstract: "This report describes the design of the mobile nuclear power plant which is to be the prototype of a mobile, low-powered nuclear power plant intended to furnish electrical power in remote locations."
Date: May 16, 1960
Creator: Linenberger, G. A.
Partner: UNT Libraries Government Documents Department
open access

In-Pile Tests of GCRE-IB Prototype Fuel Elements: Interim Report, 1958-1959

Description: Interim report for the Army Gas-Cooled Reactor Systems Program, discussing various tests in a project to "develop and evaluate a ceramic-core, pin-type fuel element" (p. 1).
Date: December 1960
Creator: Watanabe, H. T.; Janne, J. E. & Wilson, W. D.
Partner: UNT Libraries Government Documents Department
open access

Molten-Salt Reactor Program Quarterly Progress Report: July 1960

Description: Report containing ongoing projects and experiments undertaken by the Oak Ridge National Laboratory's Molten-Salt Reactor Program.
Date: December 22, 1960
Creator: Oak Ridge National Laboratory
Partner: UNT Libraries Government Documents Department
open access

The Liquid Metal Thorium Breeder Reactor

Description: From introduction: "Investigation of breeding potential and technical and economic feasibility of breeding in the Liquid Metal Fuel Reactor concept."
Date: February 1960
Partner: UNT Libraries Government Documents Department
open access

Pyrophoricity of Uranium in Reactor Environments

Description: Report discussing information relative to the pyrophoricity of uranium for the purpose of reactor core fire safety. The report includes physical and chemical properties of uranium.
Date: January 22, 1960
Creator: Zima, G. E.
Partner: UNT Libraries Government Documents Department
open access

Design Study: Sodium Modular Reactor

Description: This study was undertaken for the USAEC under Contract AT(04-3)-189, Project Agreement No. 6, to investigate desirable features of a sodium cooled, graphite moderated uranium fueled power reactor using the modular concept, and, based on this investigation, evaluate the economic potential of this reactor type.
Date: January 15, 1960
Creator: General Electric Company
Partner: UNT Libraries Government Documents Department
open access

Steam-Cooled Power Reactor Evaluation: Mixed Spectrum Superheater

Description: From introduction: "This report provides the preliminary design for the nuclear portion of a 300 MWe Mixed Spectrum Superheater to be in operation by 1967.
Date: November 1960
Creator: U.S. Atomic Energy Commission
Partner: UNT Libraries Government Documents Department
Back to Top of Screen