3,826 Matching Results

Search Results

Advanced search parameters have been applied.
in subjects: "Modifications"  
Results: 1 - 24 next
open access

Hot helium flow test facility summary report

Description: This report summarizes the results of a study conducted to assess the feasibility and cost of modifying an existing circulator test facility (CTF) at General Atomic Company (GA). The CTF originally was built to test the Delmarva Power and Light Co. steam-driven circulator. This circulator, as modified, could provide a source of hot, pressurized helium for high-temperature gas-cooled reactor (HTGR) and gas-cooled fast breeder reactor (GCFR) component testing. To achieve this purpose, a high-temp… more
Date: June 1, 1980
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Comprehensive energy-management program. Hybrid photovoltaic/thermal absorber. Annual report, September 1, 1980-December 31, 1981

Description: Research work was done during the reporting period on the two-part research program: (A) to improve energy conservation through increased unit and system efficiencies, energy management, and system optimization, and (B) to develop a novel, low-cost hybrid photovoltaic/thermal absorber. Performance tests were conducted on all the boilers and chillers on campus. Several corrective measures were indicated and implemented. A detailed survey of energy use by functions and consumption/demand study ha… more
Date: December 1, 1981
Creator: Kumar, G. N.; Sellers, J. P. & Dybczak, Z. W.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Establishment of viscometer capability for geopressured fluids. Project 61024 final report, November 19, 1978-December 31, 1979

Description: The feasibility of modifying the IGT capillary viscometer for the measurement of methane-saturated brines at 10,000 psi and 200/sup 0/C was evaluated. The viscometer was cleaned, modified, reassembled and pressure treated. The density cells were calibrated to a precision of approximately 7%. The viscosity of pure value was measured and the best value obtained was 6% below values reported in the literature. The operation of the viscometer was time-consuming and required meticulous cleaning betwe… more
Date: October 1, 1980
Creator: Rockar, E. & Randolph, P.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Cadmium sulfide/copper sulfide heterojunction cell research. Final report, February 26, 1979-July 15, 1980

Description: Extensive modifications were made to the multi-source deposition apparatus. These include the installation of a larger vacuum chamber on the existing system. The new chamber provides improved inter-source shielding, an improved substrate mounting and heating system, and a vacuum interlock for introducing substrates. CdS resistivity control by both In doping and off-stoichiometric deposition has been investigated. Indium doping has been achieved both by diffusion from a pre-deposited In layer an… more
Date: June 30, 1980
Creator: Thornton, J. A. & Cornog, D. G.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Investigation of impurity radiation from a well diganosed, laser heated plasma sample. Final report

Description: The results are described of an experimental and theoretical program designed to measure the relative intensities of line radiation from various ionization stages of carbon and helium impurities added to a deuterium plasma, and to relate the observed line intensity ratios to the plasma temperature. A deuterium sample plasma is produced and heated to a temperature of 2 to 7 eV at an electron density of 5 x 10/sup 16/ cm/sup -3/. The plasma parameters are monitored at various discrete times durin… more
Date: November 1, 1977
Creator: Crawford, E.; Quimby, D.; Hoffman, A. & Pietrzyk, Z.A.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Molecular Sieve Regeneration System for assaying HTO from detritiation systems

Description: A Molecular Sieve Regeneration System (MSRS) is being added to the existing Tritium Waste Treatment system (TWT) within the Tritium Systems Test Assembly (TSTA) at the Los Alamos National Laboratory. This system is an upgrade to the TWT to provide accurate measurements of the liquid waste generated from this system. Within the TWT, hydrogen isotopes are removed from the effluent gas stream by the catalytic conversion to water and the subsequent removal of water by molecular sieve trapping prior… more
Date: January 1, 1992
Creator: Nasise, J.E.; Anderson, J.L. (Los Alamos National Lab., NM (United States)) & Naruse, Y. (Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan))
Item Type: Refine your search to only Article
Partner: UNT Libraries Government Documents Department
open access

MHD Coal-Fired Flow Facility. Quarterly technical progress report, January-March 1980

Description: The University of Tennessee Space Institute (UTSI) reports on significant activity, task status, planned research, testing, development, and conclusions for the Magnetohydrodynamics (MHD) Coal-Fired Flow Facility (CFFF) and the Research and Development Laboratory. Although slowed by incessant rain during several days, work on the CFFF Bid Packages progressed to nearly 100 percent completion, excluding later punchlist items. On the quench system, the cyclone separator was delivered to UTSI, and … more
Date: May 30, 1980
Creator: Altstatt, M. C. & Attig, R.C. Baucum, W.E.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Low-Btu coal-gasification-process design report for Combustion Engineering/Gulf States Utilities coal-gasification demonstration plant. [Natural gas or No. 2 fuel oil to natural gas or No. 2 fuel oil or low Btu gas]

Description: This report describes a coal gasification demonstration plant that was designed to retrofit an existing steam boiler. The design uses Combustion Engineering's air blown, atmospheric pressure, entrained flow coal gasification process to produce low-Btu gas and steam for Gulf States Utilities Nelson No. 3 boiler which is rated at a nominal 150 MW of electrical power. Following the retrofit, the boiler, originally designed to fire natural gas or No. 2 oil, will be able to achieve full load po… more
Date: June 1, 1982
Creator: Andrus, H E; Rebula, E; Thibeault, P R & Koucky, R W
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Advanced development of a pressurized ash agglomerating fluidized-bed coal gasification system. Quarterly progress report, April 1-June 30, 1982

Description: The overall objective of the Westinghouse coal gasification program is to demonstrate the viability of the Westinghouse pressurized, fluidized bed, gasification system for the production of medium-Btu fuel gas for syngas, electrical power generation, chemical feedstocks, or industrial fuels and to obtain performance and scaleup data for the process and hardware. Progress reports are presented for the following tasks: (1) operation and maintenance of the process development unit (PDU); (2) proce… more
Date: October 21, 1982
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Ion-optical studies for improved ion transmission in multistage isotope-ratio mass spectrometers

Description: Theoretical and experimental ion-optical studies of multistage isotope-ratio mass spectrometers were conducted to determine what improvement in ion transmission efficiency might be attainable through design changes. The computer program GIOS (General Ion Optical Systems) was used to perform theoretical calculations of focusing properties and ion transmission efficiency. Actual transmission through multiple-sector instruments was determined from measurements of the ion beam vertical profile at t… more
Date: October 1, 1991
Creator: Stoffels, J.J. (Pacific Northwest Lab., Richland, WA (United States)) & Laue, H.J. (Purdue Univ., Lafayette, IN (United States))
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

New newtron time-of-flight (NTOF) facilities at the Brookhaven 200-MeV Linac

Description: The installation of a new beam chopper and radio-frequency quadrupole (RFQ) preinjector (750 keV) at the Brookhaven National Laboratory (BNL) 200-MeV Linac will enable single micropulse selection (pulse width <1 ns) with periods ranging from 400 ns to 10 ..mu..s. The standard micropulse intensity is 1.2 X 10/sup 9/ p..mu.. pulse with dc-average beam currents of 50 nA-1 ..mu..A routinely available. The NTOF facilities consists of 30-100 meter flight paths at angles of 0, 12, 30, 45, 90, and 135/… more
Date: January 1, 1988
Creator: Ward, T.E.; Alessi, J.; Brennan, J.; Grand, P.; Lankshear, R.; Snead, C.L. et al.
Item Type: Refine your search to only Article
Partner: UNT Libraries Government Documents Department
open access

Analysis of plasma coupling with the prototype DIII-D ICRF antenna

Description: Coupling to plasma in the H-mode is essential to the success of future ignited machines such as CIT. To ascertain voltage and current requirements for high-power second harmonic heating (2 MW in a 35- by 50-cm port), coupling to the DIII-D tokamak with a prototype compact loop antenna has been measured. The results show good loading for L-mode and limiter plasmas, but coupling 2 MW to an H-mode plasma demands voltages and currents near the limit of present technology. We report the technologica… more
Date: January 1, 1988
Creator: Ryan, P.M.; Hoffman, D.J.; Bigelow, T.S.; Baity, F.W.; Gardner, W.L.; Mayberry, M.J. et al.
Item Type: Refine your search to only Article
Partner: UNT Libraries Government Documents Department
open access

Advanced development of a pressurized ash agglomerating fluidized-bed coal gasification system. Quarterly progress report, October 1-December 31, 1982

Description: The overall objective of the Westinghouse coal gasification program is to demonstrate the viability of the Westinghouse pressurized, fluidized bed, gasification system for the production of medium-Btu fuel gas for syngas, electrical power generation, chemical feedstocks, or industrial fuels and to obtain performance and scaleup data for the process and hardware. Progress reports are presented for the following tasks: (1) operation and maintenance of the process development unit (PDU); (2) proce… more
Date: April 21, 1983
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Prospects for top at CDF

Description: During the next two years, the Fermilab Tavatron is expected to deliver approximately 100pb{sup {minus}1} of integrated luminosity. We describe improvements to the CDF detector since the 1988--89 collider run and discuss the prospects for the discovery of the top quark during the 1992--93 collider runs.
Date: June 3, 1992
Creator: Gerdes, D. (Chicago Univ., IL (United States))
Item Type: Refine your search to only Article
Partner: UNT Libraries Government Documents Department
open access

Upgrade of the Proton West secondary beamline

Description: As originally designed and operated, protons entering PW6 were steered by a series of EPB dipoles into a single interaction length beryllium target, some 43 feet from the enclosure wall. Ensuing secondary beams, either p{sup +}/{pi}{sup +} or p{sup -}/{pi}{sup -}, were collected by a string of quadrupoles following the target, steered westward, away from the Proton Center line, through PW6 and PW7, and ultimately focussed on experiment production targets located within the large PW8 hall. Aroun… more
Date: October 10, 1989
Creator: Spiegel, L.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Fermilab Tevatron and Pbar source status report

Description: The antiproton production cycle is enumerated, and the commissioning of the antiproton source is described, giving milestones and major obstacles. The Tevatron collider operation is described, including procedure to load the Tevatron with three bunches of protons and three bunches of antiprotons. Commissioning of the Main Ring and Tevatron for collider operation is described. Development and accelerator studies in four areas were necessary: main ring RF manipulations; controls and applications … more
Date: August 1, 1986
Creator: Edwards, H.
Item Type: Refine your search to only Article
Partner: UNT Libraries Government Documents Department
open access

Instrument for observing transient cosmic gamma-ray sources for the ISEE-C Heliocentric spacecraft

Description: Satellite instrumentation that would serve as one element of a three-satellite network to provide precise directional information for the recently discovered cosmic gamma-ray bursts is described. The proposed network would be capable of determining source locations with uncertainties of less than one arc minute, sufficient for a meaningful optical and radio search. The association of the gamma bursts with a known type of astrophysical object provides the most direct method for establishing sour… more
Date: December 1, 1977
Creator: Evans, W.D.; Aiello, W.P. & Klebesadel, R.W.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Technical evaluation of the proposed design modifications and technical specification changes on grid voltage degradation for the H. B. Robinson Nuclear Generating Plant, Unit 2

Description: This report documents the technical evaluation of the proposed design modifications and technical specification changes on grid voltage degradation for the H. B. Robinson Nuclear Generating Plant Unit 2. The review criteria are based on IEEE Std. 279-1971, IEEE Std. 308-1974, and General Design Criterion 17 of the Code of Federal Regulations, Title 10, Part 50, Appendix A requirements for determining the acceptability of the proposed system to protect the Class 1E equipment from degradation of … more
Date: July 1, 1980
Creator: Selan, J.C.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Neutron flux enhancement at LASREF

Description: The accelerator at the Los Alamos Meson Physics Facility produces a 1-mA beam of protons at an energy of 800 MeV. Since 1985, the Los Alamos Spallation Radiation Effects Facility (LASREF) has made use of the neutron flux that is generated as the incident protons interact with the nuclei in targets and a copper beam stop. A variety of basic and applied experiments in radiation damage and radiation effects have been completed. Recent studies indicate that the flux at LASREF can be increased by at… more
Date: January 1, 1991
Creator: Sommer, W. F.; Ferguson, P. D. & Wechsler, M. S.
Item Type: Refine your search to only Article
Partner: UNT Libraries Government Documents Department
open access

Pipelines programming paradigms: Prefab plumbing

Description: Mastery of CMS Pipelines is a process of learning increasingly sophisticated tools and techniques that can be applied to your problem. This paper presents a compilation of techniques that can be used as a reference for solving similar problems
Date: August 1, 1991
Creator: Boeheim, C.
Item Type: Refine your search to only Article
Partner: UNT Libraries Government Documents Department
open access

Analysis of LOFT steam generator main feed piping loop seal modification

Description: The stress analysis is presented for the proposed loop seal modification to the LOFT Steam Generator Main Feed Piping. THE SAP IV finite element computer program was used to analyze normal, upset, emergency, and faulted conditions. Results of the analysis indicate that the modified main feed piping system will satisfy all structural adequacy criteria specified in Subarticle NC-3650 of the ASME Boiler and Pressure Vessel Code. Results also show that the isolation snubber configuration, specified… more
Date: February 14, 1978
Creator: Nitzel, M.E.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Continuous Czochralski growth. Silicon sheet growth development of the large area silicon sheet task of the Low Cost Silicon Solar Array Project. First quarterly progress report, October--December 1977

Description: The development of equipment and processes to produce single crystal solar silicon by a continuous Czochralski method was studied. &#x27;&#x27;Continuous&#x27;&#x27; is defined as the ability to produce 100 kilograms of crystal from only one melt container. The equipment to be used is a Hamco CG2000 Production Crystal Grower. Certain modifications will be made to the grower to enable periodic replenishment of silicon into the crucible and removal of grown crystals. The crystal grower was constr… more
Date: December 31, 1977
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Study on reduction of accessory-horsepower requirements. Third quarterly progress report

Description: The objective of this study program is to minimize automotive accessory horsepower consumption, and thereby maximize overall vehicle fuel economy, by utilizing continuously variable speed drives or auxiliary power units (APUs) in a standard passenger automobile. As an aid to definitizing accessory performance, load requirements and fuel economy, a baseline vehicle has beeen established. This vehicle is a conventional intermediate size 5- or 6-passenger automobile with a 4.1 to 5.7 liter (250 to… more
Date: April 23, 1975
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Preliminary evaluation of hermetic JT/LJT/R P connector socket contact design

Description: This report presents a precursory examination of a number of issues pertaining to socket contacts in hermetic connectors. The principal issues addressed are high-contact resistance and contact chatter (circuit discontinuities). Efforts examining the characteristics of the existing socket contact design, the possibility of connector/contact rework, quick-fix solutions, and contact redesigns are summarized.
Date: October 1, 1991
Creator: Baca, J. R. F.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
Back to Top of Screen