Explore Results

open access

Alignment validation

Description: The four experiments, ALICE, ATLAS, CMS and LHCb are currently under constructionat CERN. They will study the products of proton-proton collisions at the Large Hadron Collider. All experiments are equipped with sophisticated tracking systems, unprecedented in size and complexity. Full exploitation of both the inner detector andthe muon system requires an accurate alignment of all detector elements. Alignmentinformation is deduced from dedicated hardware alignment systems and the reconstruction of charged particles. However, the system is degenerate which means the data is insufficient to constrain all alignment degrees of freedom, so the techniques are prone to converging on wrong geometries. This deficiency necessitates validation and monitoring of the alignment. An exhaustive discussion of means to validate is subject to this document, including examples and plans from all four LHC experiments, as well as other high energy experiments.
Date: September 6, 2008
Creator: ALICE; ATLAS; CMS; LHCb & Golling, Tobias
Partner: UNT Libraries Government Documents Department
open access

Plutonium reclamation facility (PRF), building 236-Z layup plan

Description: This document reviews each system inside PRF to determine the operation and maintenance requirements necessary to maintain safe and predictable system performance for facility systems needed to remain operational while minimizing the maintenance and surveillance being performed. Also covered are the actions required to place PRF in a safe layup configuration while minimizing hazards and taking into account the need for reactivation of certain equipment when cleanup work commences in the future.
Date: April 6, 1999
Creator: ANDERSON, R.N.
Partner: UNT Libraries Government Documents Department
open access

Reconfigurable mobile manipulation for accident response

Description: The need for a telerobotic vehicle with hazard sensing and integral manipulation capabilities has been identified for use in transportation accidents where nuclear weapons are involved. The Accident Response Mobile Manipulation System (ARMMS) platform has been developed to provide remote dexterous manipulation and hazard sensing for the Accident Response Group (ARG) at Sandia National Laboratories. The ARMMS' mobility platform is a military HMMWV [High Mobility Multipurpose Wheeled Vehicle] that is teleoperated over RF or Fiber Optic communication channels. ARMMS is equipped with two high strength Schilling Titan II manipulators and a suite of hazardous gas and radiation sensors. Recently, a modular telerobotic control architecture call SMART (Sandia Modular Architecture for Robotic and Teleoperation) has been applied to ARMMS. SMART enables input devices and many system behaviors to be rapidly configured in the field for specific mission needs. This paper summarizes current SMART developments applied to ARMMS.
Date: June 6, 2000
Creator: ANDERSON,ROBERT J.; MORSE,WILLIAM D.; SHIREY,DAVID L.; CDEBACA,DANIEL M.; HOFFMAN JR.,JOHN P. & LUCY,WILLIAM E.
Partner: UNT Libraries Government Documents Department
open access

Mass, quark-number, and sqrt sNN dependence of the second andfourth flow harmonics in ultra-relativistic nucleus-nucleuscollisions

Description: We present STAR measurements of the azimuthal anisotropyparameter v_2 for pions, kaons, protons, Lambda, bar Lambda, Xi+bar Xi,and \Omega + bar Omega, along with v_4 for pions, kaons, protons, andLambda + bar Lambda at mid-rapidity for Au+Au collisions at sqrt sNN=62.4and 200 GeV. The v_2(p_T) values for all hadron species at 62.4 GeV aresimilar to those observed in 130 and 200 GeV collisions. For observedkinematic ranges, v_2 values at 62.4, 130, and 200 GeV are as little as10 percent-15 percent larger than those in Pb+Pb collisions at sqrt s NN=17.3 GeV. At intermediate transverse momentum (p_T from 1.5-5 GeV/c),the 62.4 GeV v_2(p_T) and v_4(p_T) values are consistent with thequark-number scaling first observed at 200 GeV. A four-particle cumulantanalysis is used to assess the non-flow contributions to pions andprotons and some indications are found for a smaller non-flowcontribution to protons than pions. Baryon v_2 is larger than anti-baryonv_2 at 62.4 and 200 GeV perhaps indicating either that the initialspatial net-baryon distribution is anisotropic, that the mechanismleading to transport of baryon number from beam- to mid-rapidity enhancesv_2, or that anti-baryon and baryon annihilation is larger in thein-plane direction.
Date: January 6, 2007
Creator: Abelev, B. I.; Adams, J.; Aggarwal, M. M.; Ahammed, Z.; Amonett,J.; Anderson, B. D. et al.
Partner: UNT Libraries Government Documents Department
open access

Natural Analogues of Nuclear Waste Glass Corrosion.

Description: This report reviews and summarizes studies performed to characterize the products and processes involved in the corrosion of natural glasses. Studies are also reviewed and evaluated on how well the corrosion of natural glasses in natural environments serves as an analogue for the corrosion of high-level radioactive waste glasses in an engineered geologic disposal system. A wide range of natural and experimental corrosion studies has been performed on three major groups of natural glasses: tektite, obsidian, and basalt. Studies of the corrosion of natural glass attempt to characterize both the nature of alteration products and the reaction kinetics. Information available on natural glass was then compared to corresponding information on the corrosion of nuclear waste glasses, specifically to resolve two key questions: (1) whether one or more natural glasses behave similarly to nuclear waste glasses in laboratory tests, and (2) how these similarities can be used to support projections of the long-term corrosion of nuclear waste glasses. The corrosion behavior of basaltic glasses was most similar to that of nuclear waste glasses, but the corrosion of tektite and obsidian glasses involves certain processes that also occur during the corrosion of nuclear waste glasses. The reactions and processes that control basalt glass dissolution are similar to those that are important in nuclear waste glass dissolution. The key reaction of the overall corrosion mechanism is network hydrolysis, which eventually breaks down the glass network structure that remains after the initial ion-exchange and diffusion processes. This review also highlights some unresolved issues related to the application of an analogue approach to predicting long-term behavior of nuclear waste glass corrosion, such as discrepancies between experimental and field-based estimates of kinetic parameters for basaltic glasses.
Date: January 6, 1999
Creator: Abrajano, T. A., Jr.; Ebert, W. L. & Luo, J. S.
Partner: UNT Libraries Government Documents Department
open access

SHIPMENT OF TWO DOE-STD-3013 CONTAINERS IN A 9977 TYPE B PACKAGE

Description: The 9977 is a certified Type B Packaging authorized to ship uranium and plutonium in metal and oxide forms. Historically, the standard container for these materials has been the DOE-STD-3013 which was specifically designed for the long term storage of plutonium bearing materials. The Department of Energy has used the 9975 Packaging containing a single 3013 container for the transportation and storage of these materials. In order to reduce container, shipping, and storage costs, the 9977 Packaging is being certified for transportation and storage of two 3013 containers. The challenges and risks of this content and the 9977s ability to meet the Code of Federal Regulations for the transport of these materials are presented.
Date: June 6, 2011
Creator: Abramczyk, G.; Bellamy, S.; Loftin, B. & Nathan, S.
Partner: UNT Libraries Government Documents Department
open access

SHIPMENT OF NON-TRADITIONAL CONTENTS IN THE 9977 TYPE B PACKAGE

Description: The 9977 is a certified Type B Packaging authorized to ship uranium and plutonium in metal and oxide forms. These materials are typically confined within metallic containers designed for ease of handling and to prevent the spread of contamination. The Pacific Northwest National Laboratory (PNNL) uses Pu and U sources for the training of domestic and international customs agents in the identification and detection of radioactive materials (RAM). These materials are packed in polycarbonate containers which permit the trainees to view the RAM. The safety basis was made to authorize the use of these unusual containers. The inclusion of the PNNL Training Source Contents into the 9977 Packaging imposed unique conditions previously unanalyzed. The use of polycarbonate as a content container material, while different from any configuration previously considered, does not raise any safety issues with the package which continues to operate with a large safety margin for temperatures, pressures, containment, dose rates, and subcriticality.
Date: June 6, 2011
Creator: Abramczyk, G.; Loftin, B.; Bellamy, S. & Nathan, S.
Partner: UNT Libraries Government Documents Department
open access

RECLAMATION OF RADIOACTIVE MATERIAL PACKAGING COMPONENTS

Description: Radioactive material packages are withdrawn from use for various reasons; loss of mission, decertification, damage, replacement, etc. While the packages themselves may be decertified, various components may still be able to perform to their required standards and find useful service. The Packaging Technology and Pressurized Systems group of the Savannah River National Laboratory has been reducing the cost of producing new Type B Packagings by reclaiming, refurbishing, and returning to service the containment vessels from older decertified packagings. The program and its benefits are presented.
Date: June 6, 2011
Creator: Abramczyk, G.; Nathan, S.; Loftin, B. & Bellamy, S.
Partner: UNT Libraries Government Documents Department
open access

The development of precipitated iron catalysts with improved stability

Description: The objective of this program is to identify the chemical principles governing the deactivation of precipitated iron catalysts during Fischer-Tropsch synthesis and to use these chemical principles in the design of catalysts suitable for slurry reactors. The performance targets are 88% CO+H{sub 2} conversion with less than 1% deactivation/day for 1 month and a methane and ethane selectivity of no more than 7% (based on hydrocarbons and oxygenates only) at a space velocity of at least 2 normal liters per hr per gram iron (NL/hr/gFe) using a synthesis gas with 0.5-1.0 H{sub 2}:CO ratio in a slurry reactor.
Date: May 6, 1992
Creator: Abrevaya, H.
Partner: UNT Libraries Government Documents Department
open access

The development of precipitated iron catalysts with improved stability

Description: The objective of this program is to identify the chemical principles governing the deactivation of precipitated iron catalysts during Fischer-Tropsch synthesis and to use these chemical principles in the design of catalysts suitable for slurry reactors. The performance targets are 88% CO+H{sub 2} conversion with less than 1% deactivation/day for 1 month and a methane and ethane selectivity of no more than 7% (based on hydrocarbons and oxygenates only) at a space velocity of at least 2 normal liters per hr gram iron (NL/hr/gFe) using a synthesis gas with 0.5--1.0 H{sub 2}:Co ratio in a slurry reactor.
Date: May 6, 1992
Creator: Abrevaya, H.
Partner: UNT Libraries Government Documents Department
open access

The development of precipitated iron catalysts with improved stability

Description: The objective of this program is to identify the chemical principles governing the deactivation of precipitated iron catalysts during Fischer-Tropsch synthesis and to use these chemical principles in the design of catalysts suitable for slurry reactors. The performance targets are 88% CO+H{sub 2} conversion with less than 1% deactivation/day for 1 month and a methane and ethane selectivity of no more than 7% (based on hydrocarbons and oxygenates only) at a space velocity of at least 2 normal liters per hr per gram iron (NL/hr/gFe) using a synthesis gas with 0.5-1.0 H{sub 2}:CO ratio in a slurry reactor.
Date: May 6, 1992
Creator: Abrevaya, H.
Partner: UNT Libraries Government Documents Department
open access

The development of precipitated iron catalysts with improved stability

Description: The objective of this program is to identify the chemical principles governing the deactivation of precipitated iron catalysts during Fischer-Tropsch synthesis and to use these chemical principles in the design of catalysts suitable for slurry reactors. The performance targets are 88% CO+H{sub 2} conversion with less than 1% deactivation/day for 1 month and a methane and ethane selectivity of no more than 7% (based on hydrocarbons and oxygenates only) at a space velocity of at least 2 normal liters per hr per gram iron (NL/hr/gFe) using a synthesis gas with 0.5-1.0 H{sub 2}:CO ratio in a slurry reactor.
Date: May 6, 1992
Creator: Abrevaya, H.
Partner: UNT Libraries Government Documents Department
open access

The development of precipitated iron catalysts with improved stability

Description: The objective of this program is to identify the chemical principles governing the deactivation of precipitated iron catalysts during Fischer-Tropsch synthesis and to use these chemical principles in the design of catalysts suitable for slurry reactors. The performance targets are 88% CO+H{sub 2} conversion with less than 1% deactivation/day for 1 month and a methane and ethane selectivity of no more than 7% (based on hydrocarbons and oxygenates only) at a space velocity of at least 2 normal liters per hr per gram iron (NL/hr/gFe) using a synthesis gas with 0.5-1.0 H{sub 2}:CP ratio in a slurry reactor.
Date: May 6, 1992
Creator: Abrevaya, H.
Partner: UNT Libraries Government Documents Department
open access

The development of precipitated iron catalysts with improved stability

Description: The objective of this program is to identify the chemical principles governing the deactivation of precipitated iron catalysts during Fischer-Tropsch synthesis and to use these chemical principles in the design of catalysts suitable for slurry reactors. The performance targets are 88% CO+H{sub 2} conversion with less than 1% deactivation/day for 1 month and a methane and ethane selectivity of no more than 7% (based on hydrocarbons and oxygenates only) at a space velocity of at least 2 normal liters per hr per gram iron (NL/hr/gFe) using a synthesis gas with 0.5-1.0 H{sub 2}:CO ratio in a slurry reactor.
Date: May 6, 1992
Creator: Abrevaya, H.
Partner: UNT Libraries Government Documents Department
open access

The development of precipitated iron catalysts with improved stability. Technical progress report No. 5, September 16, 1988--December 16, 1988

Description: The objective of this program is to identify the chemical principles governing the deactivation of precipitated iron catalysts during Fischer-Tropsch synthesis and to use these chemical principles in the design of catalysts suitable for slurry reactors. The performance targets are 88% CO+H{sub 2} conversion with less than 1% deactivation/day for 1 month and a methane and ethane selectivity of no more than 7% (based on hydrocarbons and oxygenates only) at a space velocity of at least 2 normal liters per hr per gram iron (NL/hr/gFe) using a synthesis gas with 0.5-1.0 H{sub 2}:CO ratio in a slurry reactor.
Date: May 6, 1992
Creator: Abrevaya, H.
Partner: UNT Libraries Government Documents Department
open access

The development of precipitated iron catalysts with improved stability. Technical progress report No. 6, December 16, 1988--March 16, 1989

Description: The objective of this program is to identify the chemical principles governing the deactivation of precipitated iron catalysts during Fischer-Tropsch synthesis and to use these chemical principles in the design of catalysts suitable for slurry reactors. The performance targets are 88% CO+H{sub 2} conversion with less than 1% deactivation/day for 1 month and a methane and ethane selectivity of no more than 7% (based on hydrocarbons and oxygenates only) at a space velocity of at least 2 normal liters per hr per gram iron (NL/hr/gFe) using a synthesis gas with 0.5-1.0 H{sub 2}:CO ratio in a slurry reactor.
Date: May 6, 1992
Creator: Abrevaya, H.
Partner: UNT Libraries Government Documents Department
open access

The development of precipitated iron catalysts with improved stability. Technical progress report No. 7, March 16, 1989--June 16, 1989

Description: The objective of this program is to identify the chemical principles governing the deactivation of precipitated iron catalysts during Fischer-Tropsch synthesis and to use these chemical principles in the design of catalysts suitable for slurry reactors. The performance targets are 88% CO+H{sub 2} conversion with less than 1% deactivation/day for 1 month and a methane and ethane selectivity of no more than 7% (based on hydrocarbons and oxygenates only) at a space velocity of at least 2 normal liters per hr per gram iron (NL/hr/gFe) using a synthesis gas with 0.5-1.0 H{sub 2}:CP ratio in a slurry reactor.
Date: May 6, 1992
Creator: Abrevaya, H.
Partner: UNT Libraries Government Documents Department
open access

The development of precipitated iron catalysts with improved stability. Technical progress report No. 8, June 16, 1989--September 16, 1989

Description: The objective of this program is to identify the chemical principles governing the deactivation of precipitated iron catalysts during Fischer-Tropsch synthesis and to use these chemical principles in the design of catalysts suitable for slurry reactors. The performance targets are 88% CO+H{sub 2} conversion with less than 1% deactivation/day for 1 month and a methane and ethane selectivity of no more than 7% (based on hydrocarbons and oxygenates only) at a space velocity of at least 2 normal liters per hr per gram iron (NL/hr/gFe) using a synthesis gas with 0.5-1.0 H{sub 2}:CO ratio in a slurry reactor.
Date: May 6, 1992
Creator: Abrevaya, H.
Partner: UNT Libraries Government Documents Department
Back to Top of Screen