UNT Libraries Government Documents Department - Browse

ABOUT BROWSE FEED

2-D Finite Element Cable and Box IEMP Analysis

Description: A 2-D finite element code has been developed for the solution of arbitrary geometry cable SGEMP and box IEMP problems. The quasi- static electric field equations with radiation- induced charge deposition and radiation-induced conductivity y are numerically solved on a triangular mesh. Multiple regions of different dielectric materials and multiple conductors are permitted.
Date: December 17, 1998
Creator: Scivner, G.J. & Turner, C.D.
Item Type: Article

2-D image segmentation using minimum spanning trees

Description: This paper presents a new algorithm for partitioning a gray-level image into connected homogeneous regions. The novelty of this algorithm lies in the fact that by constructing a minimum spanning tree representation of a gray-level image, it reduces a region partitioning problem to a minimum spanning tree partitioning problem, and hence reduces the computational complexity of the region partitioning problem. The tree-partitioning algorithm, in essence, partitions a minimum spanning tree into subtrees, representing different homogeneous regions, by minimizing the sum of variations of gray levels over all subtrees under the constraints that each subtree should have at least a specified number of nodes, and two adjacent subtrees should have significantly different average gray-levels. Two (faster) heuristic implementations are also given for large-scale region partitioning problems. Test results have shown that the segmentation results are satisfactory and insensitive to noise.
Date: September 1995
Creator: Xu, Y. & Uberbacher, E. C.
Item Type: Report

2-D Imaging of Electron Temperature in Tokamak Plasmas

Description: By taking advantage of recent developments in millimeter wave imaging technology, an Electron Cyclotron Emission Imaging (ECEI) instrument, capable of simultaneously measuring 128 channels of localized electron temperature over a 2-D map in the poloidal plane, has been developed for the TEXTOR tokamak. Data from the new instrument, detailing the MHD activity associated with a sawtooth crash, is presented.
Date: July 8, 2004
Creator: Munsat, T.; Mazzucato, E.; Park, H.; Domier, C. W.; Johnson, M.; Luhmann, N. C., Jr. et al.
Item Type: Report

2-D linear motion system. Innovative technology summary report

Description: The US Department of Energy's (DOE's) nuclear facility decontamination and decommissioning (D and D) program requires buildings to be decontaminated, decommissioned, and surveyed for radiological contamination in an expeditious and cost-effective manner. Simultaneously, the health and safety of personnel involved in the D and D activities is of primary concern. D and D workers must perform duties high off the ground, requiring the use of manlifts or scaffolding, often, in radiologically or chemically contaminated areas or in areas with limited access. Survey and decontamination instruments that are used are sometimes heavy or awkward to use, particularly when the worker is operating from a manlift or scaffolding. Finding alternative methods of performing such work on manlifts or scaffolding is important. The 2-D Linear Motion System (2-D LMS), also known as the Wall Walker{trademark}, is designed to remotely position tools and instruments on walls for use in such activities as radiation surveys, decontamination, and painting. Traditional (baseline) methods for operating equipment for these tasks require workers to perform duties on elevated platforms, sometimes several meters above the ground surface and near potential sources of contamination. The Wall Walker 2-D LMS significantly improves health and safety conditions by facilitating remote operation of equipment. The Wall Walker 2-D LMS performed well in a demonstration of its precision, accuracy, maneuverability, payload capacity, and ease of use. Thus, this innovative technology is demonstrated to be a viable alternative to standard methods of performing work on large, high walls, especially those that have potential contamination concerns. The Wall Walker was used to perform a final release radiological survey on over 167 m{sup 2} of walls. In this application, surveying using a traditional (baseline) method that employs an aerial lift for manual access was 64% of the total cost of the improved technology. However, for areas over approximately ...
Date: November 1, 1998
Item Type: Report

2-D Modeling of Energy-z Beam Dynamics Using the LiTrack Matlab Program

Description: Short bunches and the bunch length distribution have important consequences for both the LCLS project at SLAC and the proposed ILC project. For both these projects, it is important to simulate what bunch length distributions are expected and then to perform actual measurements. The goal of the research is to determine the sensitivity of the bunch length distribution to accelerator phase and voltage. This then indicates the level of control and stability that is needed. In this project I simulated beamlines to find the rms bunch length in three different beam lines at SLAC, which are the test beam to End Station A (ILC-ESA) for the ILC studies, Linac Coherent Light Source (LCLS) and LCLS-ESA. To simulate the beamlines, I used the LiTrack program, which does a 2-dimensional tracking of an electron bunch's longitudinal (z) and the energy spread beam (E) parameters. In order to reduce the time of processing the information, I developed a small program to loop over adjustable machine parameters. LiTrack is a Matlab script and Matlab is also used for plotting and saving and loading files. The results show that the LCLS in Linac-A is the most sensitive when looking at the ratio of change in phase degree to rate of change. The results also show a noticeable difference between the LCLS and LCLS-ESA, which suggest that further testing should go into looking the Beam Switch Yard and End Station A to determine why the result of the LCLS and LCLS-ESA vary.
Date: December 15, 2005
Creator: Cauley, S.K.; /Unlisted; Woods, M. & /SLAC
Item Type: Report

2-D or not 2-D, that is the question: A Northern California test

Description: Reliable estimates of the seismic source spectrum are necessary for accurate magnitude, yield, and energy estimation. In particular, how seismic radiated energy scales with increasing earthquake size has been the focus of recent debate within the community and has direct implications on earthquake source physics studies as well as hazard mitigation. The 1-D coda methodology of Mayeda et al. has provided the lowest variance estimate of the source spectrum when compared against traditional approaches that use direct S-waves, thus making it ideal for networks that have sparse station distribution. The 1-D coda methodology has been mostly confined to regions of approximately uniform complexity. For larger, more geophysically complicated regions, 2-D path corrections may be required. The complicated tectonics of the northern California region coupled with high quality broadband seismic data provides for an ideal ''apples-to-apples'' test of 1-D and 2-D path assumptions on direct waves and their coda. Using the same station and event distribution, we compared 1-D and 2-D path corrections and observed the following results: (1) 1-D coda results reduced the amplitude variance relative to direct S-waves by roughly a factor of 8 (800%); (2) Applying a 2-D correction to the coda resulted in up to 40% variance reduction from the 1-D coda results; (3) 2-D direct S-wave results, though better than 1-D direct waves, were significantly worse than the 1-D coda. We found that coda-based moment-rate source spectra derived from the 2-D approach were essentially identical to those from the 1-D approach for frequencies less than {approx}0.7-Hz, however for the high frequencies (0.7{le} f {le} 8.0-Hz), the 2-D approach resulted in inter-station scatter that was generally 10-30% smaller. For complex regions where data are plentiful, a 2-D approach can significantly improve upon the simple 1-D assumption. In regions where only 1-D coda correction is available it is ...
Date: June 6, 2005
Creator: Mayeda, K; Malagnini, L; Phillips, W S; Walter, W R & Dreger, D
Item Type: Article

2-D Path Corrections for Local and Regional Coda Waves: A Test of Transportability

Description: Reliable estimates of the seismic source spectrum are necessary for accurate magnitude, yield, and energy estimation. In particular, how seismic radiated energy scales with increasing earthquake size has been the focus of recent debate within the community and has direct implications on earthquake source physics studies as well as hazard mitigation. The 1-D coda methodology of Mayeda et al. [2003] has provided the lowest variance estimate of the source spectrum when compared against traditional approaches that use direct S-waves, thus making it ideal for networks that have sparse station distribution. The 1-D coda methodology has been mostly confined to regions of approximately uniform complexity. For larger, more geophysically complicated regions, 2-D path corrections may be required. We will compare performance of 1-D versus 2-D path corrections in a variety of regions. First, the complicated tectonics of the northern California region coupled with high quality broadband seismic data provides for an ideal ''apples-to-apples'' test of 1-D and 2-D path assumptions on direct waves and their coda. Next, we will compare results for the Italian Alps using high frequency data from the University of Genoa. For Northern California, we used the same station and event distribution and compared 1-D and 2-D path corrections and observed the following results: (1) 1-D coda results reduced the amplitude variance relative to direct S-waves by roughly a factor of 8 (800%); (2) Applying a 2-D correction to the coda resulted in up to 40% variance reduction from the 1-D coda results; (3) 2-D direct S-wave results, though better than 1-D direct waves, were significantly worse than the 1-D coda. We found that coda-based moment-rate source spectra derived from the 2-D approach were essentially identical to those from the 1-D approach for frequencies less than {approx}0.7-Hz, however for the high frequencies (0.7 {le} f {le} 8.0-Hz), the ...
Date: July 13, 2005
Creator: Mayeda, K M; Malagnini, L; Phillips, W S; Walter, W R; Dreger, D S & Morasca, P
Item Type: Article

A 2-D Pore-Network Model of the Drying of Single-Component Liquids in Porous Media

Description: The drying of liquid-saturated porous media is typically approaching using macroscopic continuum models involving phenomenological coefficients. Insight on these coefficients can be obtained by a more fundamental study at the pore- and pore-network levels. In this report, a model based on pore-network representation of porous media that accounts for various process at the pore-scale is presented. These include mass transfer by advection and diffusion in the gas phase, viscous flow in liquid and gas phases and capillary effects at the gas-liquid menisci in the pore throats.
Date: January 20, 2000
Creator: Yortsos, Yanic C.; Yiotis, A. G.; Stubos, A. K. & Boundovis, A. G.
Item Type: Report

2-D Reflectometer Modeling for Optimizing the ITER Low-field Side Reflectometer System

Description: The response of a low-field side reflectometer system for ITER is simulated with a 2?D reflectometer code using a realistic plasma equilibrium. It is found that the reflected beam will often miss its launch point by as much as 40 cm and that a vertical array of receiving antennas is essential in order to observe a reflection on the low-field side of ITER.
Date: September 2, 2005
Creator: Kramer, G. J.; Nazikian, R.; Valeo, E. J.; Budny, R. V.; Kessel, C. & Johnson, D.
Item Type: Report

A 2-D Self-Consistent DSMC Model for Chemically Reacting Low Pressure Plasma Reactors

Description: This paper will focus on the methodology of using a 2D plasma Direct Simulation Monte Carlo technique to simulate the species transport in an inductively coupled, low pressure, chemically reacting plasma system. The pressure in these systems is typically less than 20 mtorr with plasma densities of approximately 10{sup 17} {number_sign}/m{sup 3} and an ionization level of only 0.1%. This low ionization level tightly couples the neutral, ion, and electron chemistries and interactions in a system where the flow is subsonic. We present our strategy and compare simulation results to experimental data for Cl{sub 2} in a Gaseous Electronics Conference (GEC) reference cell modified with an inductive coil.
Date: June 17, 1999
Creator: Bartel, Timothy J.; Economou, Demetre & Johannes, Justine E.
Item Type: Article

2-D Simulations of Drainage Winds and Diffusion Compared to Observations

Description: A vertically integrated dynamical drainage flow model is developed from conservation equations for momentum and mass in a terrain-following coordinate system. Wind fields from the dynamical model drive a Monte Carlo transport and diffusion model. The model needs only topographic data, an Eulerian or Lagrangian time scale and a surface drag coefficient for input data, and can be started with a motionless atmosphere. Model wind and diffusion predictions are compared to observations from the rugged Geysers CA area. Model winds generally agree with observed surface winds, and in some cases may give better estimates of area-averaged flow than point observations. Tracer gas concentration contours agree qualitatively with observed contours, and point predictions of maximum concentrations were correctly predicted to within factors of 2 to 10. Standard statistical tests of model skill showed that the accuracy of the predictions varied significantly from canyon to canyon in the Geysers are a. Model wind predictions are also compared to observations from the Savannah River Plant of SC which has gently rolling terrain. The model correctly simulated the slower development of drainage winds and slower deepening of the drainage layer in the Savannah River Valley, relative to the Geysers CA simulations. The SC simulations and observations suggest that drainage winds are more frequent in the southeast United States than is generally recognized. They may be responsible for some of the errors in air pollution concentration predictions made by Gaussian models which assume homogeneous winds and turbulence.
Date: May 29, 2001
Creator: Garrett, A. J.
Item Type: Article

A 2-GHz Rectangular Corrugated Horn

Description: We have designed, constructed and tested a large, rectangular horn antenna with a center frequency of 2.0 GHz, corrugated on the E-plane walls, made out of aluminum sheet. A new technique has been developed to solder thin aluminum strips onto the back plane to form the corrugations. The radiation beam pattern shows half-power beamwidths of 12{sup 0} and 14{sup 0} in the H and E planes respectively, and side lobe response below -40 dB at angles greater than 50{sup 0} from horn axis. The measured return loss is less than -20 dB (VSWR < 1.22) between 1.7 and 2.3 GHz; insertion loss is less than 0.15 dB.
Date: October 1, 1991
Creator: Bersanelli, M.; Bensadoun, M.; De Amici, Giovanni; Limon, M.; Smoot, George F.; Tanaka, S. et al.
Item Type: Article

2-MV electrostatic quadrupole injector for heavy-ion fusion

Description: High current and low emittance are principal requirements for heavy-ion injection into a linac driver for inertial fusion energy. An electrostatic quadrupole (ESQ) injector is capable of providing these high charge density and low emittance beams. We have modified the existing 2-MV Injector to reduce beam emittance and to double the pulse length. We characterize the beam delivered by the modified injector to the High Current Transport Experiment (HCX) and the effects of finite rise time of the extraction voltage pulse in the diode on the beam head. We demonstrate techniques for mitigating aberrations and reducing beam emittance growth in the injector.
Date: November 10, 2004
Creator: Bieniosek, F.M.; Celata, C.M.; Henestroza, E.; Kwan, J.W.; Prost, L. & Seidl, P.A.
Item Type: Article

2 MW upgrade of the Fermilab Main Injector

Description: In January 2002, the Fermilab Director initiated a design study for a high average power, modest energy proton facility. An intensity upgrade to Fermilab's 120-GeV Main Injector (MI) represents an attractive concept for such a facility, which would leverage existing beam lines and experimental areas and would greatly enhance physics opportunities at Fermilab and in the U.S. With a Proton Driver replacing the present Booster, the beam intensity of the MI is expected to be increased by a factor of five. Accompanied by a shorter cycle, the beam power would reach 2 MW. This would make the MI a more powerful machine than the SNS or the J-PARC. Moreover, the high beam energy (120 GeV) and tunable energy range (8-120 GeV) would make it a unique high power proton facility. The upgrade study has been completed and published. This paper gives a summary report.
Date: June 4, 2003
Creator: Chou, Weiren
Item Type: Article

2-Page Summary for Neptunium solubility in the Near-field Environment of A Proposed Yucca Mountain Repository

Description: The total system performance assessment (TSPA) for the proposed repository at Yucca Mountain, NV, includes a wide variety of processes to evaluate the potential release of radionuclides from the Engineered Barrier System into the unsaturated zone of the geosphere. The principal processes controlling radionuclide release and mobilization from the waste forms are captured in the model to assess the dissolved concentrations of radionuclides in the source-term. The TSPA model of the source-term incorporates the far-from-equilibrium dissolution of, for example, spent nuclear fuel (SNF) to capture bounding rates of radionuclide availability as the SNF degrades. In addition, for individual radionuclides, the source-term model evaluates solubility constraints that are more indicative of longer-term, equilibrium processes that can limit the potential mass transport from the source term in those cases. These solubility limits represent phase saturation and precipitation processes that can occur either at the waste form as it alters, or at other locations in the near-field environment (e.g., within the invert) if chemical conditions are different. Identification and selection of applicable constraints for solubility-limited radionuclide concentrations is a primary focus in formulating the source-term model for the TSPA. Neptunium is a long-lived radionuclide that becomes a larger fraction of the potential dose as radioactive decay of other radionuclides proceeds. To delineate appropriate long-term source-term controls on dissolved neptunium concentrations, a number of alternative models have been defined. The models are based on data both collected within the Yucca Mountain Project and taken from published literature, and have been evaluated against independent data sets to assess their applicability. The alternative models encompass ones based on precipitation of neptunium within its own separate oxide phases (i.e., ''pure'' Np-phases), and those where neptunium is incorporated into the secondary (tertiary, quaternary, etc.) uranyl phases forming as alteration products of SNF (secondary phases). The constraints on dissolved ...
Date: March 29, 2005
Creator: Sassani, D.; van Luik, A. & Summerson, J.
Item Type: Report

2-pi Photoproduction from CLAS and CB-ELSA - The Search for Missing Resonances

Description: 2-pi-photoproduction is one of the promising reactions to search for baryon resonances that have been predicted but have not yet been observed. The gamma-rho --> rho-pi{sup 0}-pi{sup 0}(CB-ELSA) and the gamma-rho --> rho-pi{sup +}-pi{sup -} (CLAS) data show interesting resonance structures. A partial wave analysis (PWA) has to be done to determine which baryon resonances contribute what their quantum numbers and their relative couplings to the different accessible rho-2-pi-channels and to the photon are. First preliminary PWA-results on the lowest energy rho-pi{sup 0}-pi{sup 0} data (sq rt s<1.8 GeV)look very promising. From an extension of this analysis to higher energies combining the rho-pi{sup 0}-pi{sup 0} and the rho-pi{sup +}-pi{sup -}-data, one can expect; interesting results on resonances decaying into Delta-pi, N-rho, N(pi-pi)s, N*-pi, and Delta*-pi.
Date: October 1, 2003
Creator: Thoma, Ulrike
Item Type: Article

N = 2 string amplitudes

Description: In physics, solvable models have played very important roles. Understanding a simple model in detail teaches us a lot about more complicated models in generic situations. Five years ago, C. Vafa and I found that the closed N = 2 string theory, that is a string theory with the N = 2 local supersymmetry on the worldsheet, is classically equivalent to the self-dual Einstein gravity in four spacetime dimensions. Thus this string theory is solvable at the classical level. More recently, we have examined the N = 2 string partition function for spacial compactifications, and computed it to all order in the string perturbation expansion. The fact that such computation is possible at all suggests that the N = 2 string theory is solvable even quantum mechanically.
Date: August 1, 1995
Creator: Ooguri, H.
Item Type: Article

2 {times} 2 TeV {mu}{sup +}{mu}{sup {minus}} collider: Lattice and accelerator-detector interface study

Description: The design for a high-luminosity {mu}{sup +}{mu}{sup {minus}} superconducting storage ring is presented based on first-pass calculations. Special attention is paid to two Iowa interaction regions (IR) whose optics are literally interlaced with the collider detectors. Various sources of backgrounds in IR are explored via realistic Monte Carlo simulations. An improved design of the collider lattice in the neighborhood of the interaction points (EP) is determined by the need to reduce significantly background levels in the detectors.
Date: May 1, 1995
Creator: Gelfand, N.M. & Mokhov, N.V.
Item Type: Article

A 2 to 4 nm high power FEL on the SLAC linac

Description: We report the results of preliminary studies of a 2 to 4 nm SASE FEL, using a photoinjector to produce the electron beam, and the SLAC linac to accelerate it to an energy up to 10 GeV. Longitudinal bunch compression is used to increases ten fold the peak current to 2.5 kA, while reducing the bunch length to the subpicosecond range. The saturated output power is in the multi-gigawatt range, producing about 10{sup 14} coherent photons within a bandwidth of about 0.2% rms, in a pulse of several millijoules. At 120Hz repetition rate the average power is about 1 W. The system is optimized for x-ray microscopy in the water window around 2 to 4 nm, and will permit imaging a biological sample in a single subpicosecond pulse.
Date: September 1, 1992
Creator: Pellegrini, C.; Rosenzweig, J.; Nuhn, H.D.; Pianetta, P.; Tatchyn, R.; Winick, H. et al.
Item Type: Article

2 x 2 Polyethylene Reflected and Moderated Highly Enriched Uranium System with Rhenium

Description: The 2 × 2 array HEU-Re experiment was performed on the Planet universal critical assembly machine on November 4th, 2003 at the Los Alamos Critical Experiments Facility (LACEF) at Los Alamos National Laboratory (LANL). For this experiment, there were 10 ½ units, each full unit containing four HEU foils and two rhenium foils. The top unit contained only two HEU foils and two rhenium foils. A total of 42 HEU foils were used for this experiment. Rhenium is a desirable cladding material for space nuclear power applications. This experiment consisted of HEU foils interleaved with rhenium foils and is moderated and reflected by polyethylene plates. A unit consisted of a polyethylene plate, which has a recess for rhenium foils, and four HEU foils in a single layer in the top recess of each polyethylene plate. The Planet universal criticality assembly machine has been previously used in experiments containing HEU foils interspersed with SiO2 (HEU-MET-THERM-001), Al (HEU-MET-THERM-008), MgO (HEU-MET-THERM-009), Gd foils (HEU-MET-THERM-010), 2 × 2 × 26 Al (HEU-MET-THERM-012), Fe (HEU-MET-THERM-013 and HEU-MET-THERM-015), 2 × 2 × 23 SiO2 (HEU-MET-THERM-014), 2 × 2 × 11 hastalloy plates (HEU-MET-THERM-016), and concrete (HEU-MET-THERM-018). The 2 × 2 array of HEU-Re is considered acceptable for use as a benchmark critical experiment.
Date: September 1, 2010
Creator: Ellis, A. Nichole; Hutchinson, Jesson; Bess, John D.; Polyakov, Dmitry N.; Glushkov, Evgeny S. & Glushkov, Alexey E.
Item Type: Report