UNT Libraries Government Documents Department - Browse

ABOUT BROWSE FEED

Current trends in scintillator detectors and materials

Description: The last decade has seen a renaissance in inorganic scintillator development for gamma ray detection. Lead tungstate (PbWO4) has been developed for high energy physics experiments, and possesses exceptionally high density and radiation hardness, albeit with low luminous efficiency. Lutetium orthosilicate or LSO (Lu2SiO5:Ce) possesses a unique combination of high luminous efficiency, high density, and reasonably short decay time, and is now incorporated in commercial positron emission tomography (PET) cameras. There have been advances in understanding the fundamental mechanisms that limit energy resolution, and several recently discovered materials (such as LaBr3:Ce) possess energy resolution that approaches that of direct solid state detectors. Finally, there are indications that a neglected class of scintillator materials that exhibit near band-edge fluorescence could provide scintillators with sub-nanosecond decay times and high luminescent efficiency.
Date: October 23, 2001
Creator: Moses, William W.

Current trends in the packaging of photonic devices

Description: Optoelectronic and photonic devices hold great promise for high data-rate communication and computing. Their wide implementation was limited first by the device technologies and now suffers due to the need for high-precision packaging that is mass-produced. The use of photons as a medium of communication and control implies a unique set of packaging constraints that are highly driven by the need for micron and even sub-micron alignments between photonic devices and their transmission media. Current trends in optoelectronic device packaging are reviewed and future directions are identified both for free-space (3-dimensional) and guided-wave (2-dimensional) photonics. Emphasis will be placed on the special needs generated by increasing levels of device integration.
Date: April 1, 1995
Creator: Carson, R.F.

Current U.S. Sanctions Against China

Description: In the months following China's 1989 Tiananmen Square crackdown, both the President and the Congress took a number of initiatives protesting Beijing's actions. These initiatives centered around U.S. concerns related to trade, human rights, and non-proliferation. In intervening years, the United States has periodically imposed, lifted, or waived other sanctions and concluded several trade-related agreements with China relating to these concerns. Those measures that remain in place in 1994 are detailed in the accompanying tables.
Date: August 15, 1994
Creator: Dumbaugh, Kerry

Current work in energy analysis

Description: This report describes the work performed at Berkeley Lab most recently. One of the Labs accomplishments is the publication of Scenarios of US Carbon Reductions, an analysis of the potential of energy technologies to reduce carbon emissions in the US. This analysis is described and played a key role in shaping the US position on climate change in the Kyoto Protocol negotiations. The Labs participation in the fundamental characterization of the climate change issue by the IPCC is described. Described also is a study of leaking electricity, which is stimulating an international campaign for a one-watt ceiling for standby electricity losses from appliances. This ceiling has the potential to save two-thirds of the 5% of US residential electricity currently expended on standby losses. The 54 vignettes contained in the report summarize results of research activities ranging in scale from calculating the efficacy of individual lamp ballasts to estimating the cost-effectiveness of the national Energy Star{reg_sign} labeling program, and ranging in location from a scoping study of energy-efficiency market transformation in California to development of an energy-efficiency project in the auto parts industry in Shandong Province, China.
Date: March 1998

Current Work in Energy Analysis (Energy Analysis Program -1996 Annual Report)

Description: This report describes the work that Environmental Energy Technologies Division of Lawrence Berkeley National Laboratory has been doing most recently. One of our proudest accomplishments is the publication of Scenarios of U.S. Carbon Reductions, an analysis of the potential of energy technologies to reduce carbon emissions in the U.S. This analysis played a key role in shaping the U.S. position on climate change in the Kyoto Protocol negotiations. Our participation in the fundamental characterization of the climate change issue by the IPCC is described. We are also especially proud of our study of ''leaking electricity,'' which is stimulating an international campaign for a one-watt ceiling for standby electricity losses from appliances. This ceiling has the potential to save two-thirds of the 5% of U.S. residential electricity currently expended on standby losses. The 54 vignettes contained in the following pages summarize results of research. activities ranging in scale from calculating the efficacy of individual lamp ballasts to estimating the cost-effectiveness of the national ENERGY STAR{reg_sign} labeling program, and ranging in location from a scoping study of energy-efficiency market transformation in California to development of an energy-efficiency project in the auto parts industry in Shandong Province, China. These are the intellectual endeavors of a talented team of researchers dedicated to public service.
Date: March 1, 1998
Creator: Energy Analysis Program

Current work program and reports adopted

Description: The ACIR Library is composed of publications that study the interactions between different levels of government. This document addresses the current work program of the Commission and reports adopted.
Date: August 1963
Creator: United States. Advisory Commission on Intergovernmental Relations.

The Curry District, Alaska

Description: From abstract: The Curry district lies on the south flank of the Alaska Range, on the southeast side of Mount McKinley. Most of it is west of the Alaska Railroad. The eastern portion can be easily reached from several points along the railroad route, but the western portion is much more difficult of access, owing to the numerous glacial streams and the rugged topography. The relief of the area is great, the elevation ranging from 500 feet along the Chulitna River to 20,300 feet at Mount McKinley. The Chulitna River, a tributary of the Susitna River, drains the larger part of the area described. It flows in a broad valley in the eastern part of the district, and here the maximum relief is about 3,000 feet. The western part of the district is very rugged, with numerous peaks over 6,000 feet in elevation which have sheer slopes and almost unscalable pinnacles. Winding down through this maze of rugged mountains are four major valley glaciers-Eldridge, Buckskin, Ruth, and Tokichitna-and many tributary and smaller glaciers. Practically the entire district, with the exception of the higher peaks and ridges, has been glaciated. Timber grows along the main streams and extends to an elevation of 2,000 feet, but a large portion of the district lies above that elevation.
Date: 1934
Creator: Tuck, Ralph

Curvature of the Lanthanide Contraction: An Explanation

Description: A number of studies have shown that for isostructural series of the lanthanides (elements La through Lu), a plot of equivalent metal-ligand bond lengths versus atomic number differs significantly from linearity and can be better fit as a quadratic equation. However, for hydrogen type wave functions, it is the inverse of the average distance of the electron from the nucleus (an estimate of size) that varies linearly with effective nuclear charge. This generates an apparent quadratic dependence of radius with atomic number. Plotting the inverse of lanthanide ion radii (the observed distance minus the ligand size) as a function of effective nuclear charge gives very good linear fits for a variety of lanthanide complexes and materials. Parameters obtained from this fit are in excellent agreement with the calculated Slater shielding constant, k.
Date: December 21, 2009
Creator: Raymond, Kenneth; Wellman, Daniel; Sgarlata, Carmelo & Hill, Aru

Curved detonation fronts in solid explosives: Collisions and boundary interactions

Description: Detonation Shock Dynamics (DSD) can be used to model the effects that shock curvature, {kappa}, has oil detonation speed, D{sub n}({kappa}). At the edges of the explosive, D{sub n}({kappa}) is supplemented with boundary conditions. By direct numerical simulation (DNS). The authors study how the reaction zone interacts with the edge. DSD theory has been integrated with the level-set method of Osher and Sethian and the Los Alamos DNS code Mesa to create a powerful tool for simulating complex explosive containing systems.
Date: September 1995
Creator: Bdzil, J. B.; Aslam, T. D. & Stewart, D. S.

Curved Mesh Correction And Adaptation Tool to Improve COMPASS Electromagnetic Analyses

Description: SLAC performs large-scale simulations for the next-generation accelerator design using higher-order finite elements. This method requires using valid curved meshes and adaptive mesh refinement in complex 3D curved domains to achieve its fast rate of convergence. ITAPS has developed a procedure to address those mesh requirements to enable petascale electromagnetic accelerator simulations by SLAC. The results demonstrate that those correct valid curvilinear meshes can not only make the simulation more reliable but also improve computational efficiency up to 30%. This paper presents a procedure to track moving adaptive mesh refinement in curved domains. The procedure is capable of generating suitable curvilinear meshes to enable large-scale accelerator simulations. The procedure can generate valid curved meshes with substantially fewer elements to improve the computational efficiency and reliability of the COMPASS electromagnetic analyses. Future work will focus on the scalable parallelization of all steps for petascale simulations.
Date: November 14, 2011
Creator: Luo, X.; Shephard, M.; Poly., /Rensselaer; Lee, L.Q.; Ng, C.; Ge, L. et al.

Curved mesh generation and mesh refinement using Lagrangian solid mechanics

Description: We propose a method for generating well-shaped curved unstructured meshes using a nonlinear elasticity analogy. The geometry of the domain to be meshed is represented as an elastic solid. The undeformed geometry is the initial mesh of linear triangular or tetrahedral elements. The external loading results from prescribing a boundary displacement to be that of the curved geometry, and the final configuration is determined by solving for the equilibrium configuration. The deformations are represented using piecewise polynomials within each element of the original mesh. When the mesh is sufficiently fine to resolve the solid deformation, this method guarantees non-intersecting elements even for highly distorted or anisotropic initial meshes. We describe the method and the solution procedures, and we show a number of examples of two and three dimensional simplex meshes with curved boundaries. We also demonstrate how to use the technique for local refinement of non-curved meshes in the presence of curved boundaries.
Date: December 31, 2008
Creator: Persson, P.-O. & Peraire, J.

Curved track segment finding using Tiny Triplet Finder (TTF)

Description: We describe the applications of a track segment recognition scheme called the Tiny Triplet Finder (TTF) that involves the grouping of three hits satisfying a constraint forming of a track segment. The TTF was originally developed solving straight track segment finding problem, however, it is also suitable in many curved track segment finding problems. The examples discussed in this document are among popular detector layouts in high-energy/nuclear physics experiments. Although it is not practical to find a universal recipe for arbitrary detector layouts, the method of the TTF application is illustrated via the discussion of the examples. Generally speaking, whenever the data item to be found in a pattern recognition problem contains two free parameters, and if the constraint connecting the measurements and the two free parameters has an approximate shift invariant property, the Tiny Triplet Finder can be used.
Date: November 1, 2006
Creator: Wu, Jin-Yuan; Wang, M.; Gottschalk, E.; Shi, Z. & /Fermilab

Curves of Input Impedance Change Due to Ground for Dipole Antennas

Description: Report presenting graphs of the change in input impedance of electrically short dipole antennas in the presence of an isotropic and homogeneous ground which considers four types of antennas: horizontal and vertical, electric and magnetic dipoles. Curves of the change in both the input resistance and reactance are shown for a wide range of values of the frequency, antenna height above the ground, and electromagnetic ground constants.
Date: January 31, 1964
Creator: Vogler, L. E. & Noble, J. L.

Curves showing column strength of steel and duralumin tubing

Description: Given here are a set of column strength curves that are intended to simplify the method of determining the size of struts in an airplane structure when the load in the member is known. The curves will also simplify the checking of the strength of a strut if the size and length are known. With these curves, no computations are necessary, as in the case of the old-fashioned method of strut design. The process is so simple that draftsmen or others who are not entirely familiar with mechanics can check the strength of a strut without much danger of error.
Date: May 1, 1929
Creator: Ross, Orrin E

Cusp and Y-type magnetic structures and volocity fields at the endpoint of the reconnection layer

Description: We study the two-dimensional global scale magnetic field structure for a system of two merging cylindrical plasmas in a steady state. In the limit of very large magnetic Reynolds numbers the reconnection process is slow, and the plasma almost everywhere finds itself in magnetostatic equilibrium. We show that under certain conditions the classical Syrovatskii-type Y-point configuration, with surface current concentrated only in the reconnection layer, is not possible. Instead, a cusp configuration is formed, with finite surface current in the separatrix. The equilibrium condition, together with constraints on the volume per flux, enables us to determine the shape of the separatrix and the magnetic field in the vicinity of the cusp point. Our solution is characterized by a singular power law dependence of current density on the flux coordinate ({psi}) near the separatrix: j({Psi}) {approx} |{Psi}|{sup -1/2}. This solution gives us the boundary conditions that are needed to find the flow in the reconnection and the separatrix regions.
Date: June 12, 1997
Creator: Uzdensky, D.A. & Kulsrud, R.M.

Custom VLSI circuits for high energy physics

Description: This article provides a brief guide to integrated circuits, including their design, fabrication, testing, radiation hardness, and packaging. It was requested by the Panel on Instrumentation, Innovation, and Development of the International Committee for Future Accelerators, as one of a series of articles on instrumentation for future experiments. Their original request emphasized a description of available custom circuits and a set of recommendations for future developments. That has been done, but while traps that stop charge in solid-state devices are well known, those that stop physicists trying to develop the devices are not. Several years spent dodging the former and developing the latter made clear the need for a beginner`s guide through the maze, and that is the main purpose of this text.
Date: June 1, 1998
Creator: Parker, S.

Customer adoption of small-scale on-site power generation

Description: The electricity supply system is undergoing major regulatory and technological change with significant implications for the way in which the sector will operate (including its patterns of carbon emissions) and for the policies required to ensure socially and environmentally desirable outcomes. One such change stems from the rapid emergence of viable small-scale (i.e., smaller than 500 kW) generators that are potentially competitive with grid delivered electricity, especially in combined heat and power configurations. Such distributed energy resources (DER) may be grouped together with loads in microgrids. These clusters could operate semi-autonomously from the established power system, or macrogrid, matching power quality and reliability more closely to local end-use requirements. In order to establish a capability for analyzing the effect that microgrids may have on typical commercial customers, such as office buildings, restaurants, shopping malls, and grocery stores, an economic mod el of DER adoption is being developed at Berkeley Lab. This model endeavors to indicate the optimal quantity and type of small on-site generation technologies that customers could employ given their electricity requirements. For various regulatory schemes and general economic conditions, this analysis produces a simple operating schedule for any installed generators. Early results suggest that many commercial customers can benefit economically from on-site generation, even without considering potential combined heat and power and reliability benefits, even though they are unlikely to disconnect from the established power system.
Date: April 1, 2001
Creator: Siddiqui, Afzal S.; Marnay, Chris; Hamachi, Kristina S. & Rubio, F. Javier

Customer Aggregation: An Opportunity for Green Power?

Description: We undertook research into the experience of aggregation groups to determine whether customer aggregation offers an opportunity to bring green power choices to more customers. The objectives of this report, therefore, are to (1) identify the different types of aggregation that are occurring today, (2) learn whether aggregation offers an opportunity to advance sales of green power, and (3) share these concepts and approaches with potential aggregators and green power advocates.
Date: February 26, 2001
Creator: Holt, E. & Bird, L.

Customer Choice and the Power Industry of the Future

Description: This report will begin to explore the issues, discussing what forms a transition from today's electric power grid to a grid of the future could take, and suggest questions that Congress may want to address. The United States seems to be at a turning point in the history of the electric power sector, some have advocated for the electric utility industry model to be reinvented under a "Utility 2.0" paradigm, wherein the modern needs of society for electric power and services become the driving force behind utility investments.
Date: September 22, 2014
Creator: Campbell, Richard J.

Customer interface document for the Molten Salt Test Loop (MSTL) system.

Description: The National Solar Thermal Test Facility at Sandia National Laboratories has a unique test capability called the Molten Salt Test Loop (MSTL) system. MSTL is a test capability that allows customers and researchers to test components in flowing, molten nitrate salt. The components tested can range from materials samples, to individual components such as flex hoses, ball joints, and valves, up to full solar collecting systems such as central receiver panels, parabolic troughs, or linear Fresnel systems. MSTL provides realistic conditions similar to a portion of a concentrating solar power facility. The facility currently uses 60/40 nitrate 'solar salt' and can circulate the salt at pressure up to 600psi, temperature to 585 C, and flow rate of 400-600GPM depending on temperature. The purpose of this document is to provide a basis for customers to evaluate the applicability to their testing needs, and to provide an outline of expectations for conducting testing on MSTL. The document can serve as the basis for testing agreements including Work for Others (WFO) and Cooperative Research and Development Agreements (CRADA). While this document provides the basis for these agreements and describes some of the requirements for testing using MSTL and on the site at Sandia, the document is not sufficient by itself as a test agreement. The document, however, does provide customers with a uniform set of information to begin the test planning process.
Date: March 1, 2012
Creator: Pettit, Kathleen; Kolb, William J.; Gill, David Dennis & Briggs, Ronald D.