UNT Libraries Government Documents Department - 433,316 Matching Results

Search Results

prev Results: 151 - 200 next
2-D Tomography With Bolometry in DIII-D
We have installed a 48-channel platinum-foil bolometer system on DIII-D achieve better spatial and temporal resolution of the radiated power in diverted discharges. Two 24-channel arrays provide complete plasma coverage with optimized views of the divertor. We have measured the divertor radiation profile for a series of radiative divertor and power balance experiments. We observe a rapid change in the magnitude and distribution of divertor radiation with heavy gas puffing. Unfolding the radiation profile with only two views requires us to treat the core and divertor radiation separately. The core radiation is fitted to a function of magnetic flux and is then subtracted from the divertor viewing chords. The divertor profile is then fit to a 2-D spline as a function of magnetic flux and poloidal angle.
S = -2 dibaryons and hypernuclei
Future prospects for the exploration of doubly strange hypernuclear systems are evaluated. Such systems may be produced via the double strangeness exchange reactions (K/sup -/,K/sup +/) or (K/sup -/,K/sup 0/) on nuclear targets. Theoretical estimates are given of the formation cross sections for Xi/sup -/ hypernuclear states via the one-step K/sup -/p ..-->.. K/sup +/Xi/sup -/ process, or discrete states of the ..lambda lambda.. hypernucleus in the two step reaction K/sup -/p ..-->.. ..pi../sup 0/..lambda.. followed by ..pi../sup 0/p ..-->.. K/sup +/..lambda... Recently, there has been much discussion of six quark (dibaryon) states in the Bag Model. Arguments are given which indicate that the (K/sup -/,K/sup +/) reaction on light nuclear targets (ex. /sup 3/He) affords a very promising way of producing the lowest-lying S = -2 dibaryon (called the H).
2-Dimensional studies of the disk-and-washer and side-coupled resonant cavity structures
The work done consists of three parts: optimizing the disk-and-washer (DAW) structure at ..beta.. = 0.5662 corresponding to E = 200 MeV; comparing the DAW structure with the side-coupled (SCS) structure at various values of beta, ranging from ..beta.. = 0.4569 and E = 116 MeV to ..beta.. = 0.7131 and E = 400 MeV; and re-optimizing the DAW structure at ..beta.. = 0.7131. 4 refs., 51 figs., 41 tabs.
2-Fold G.M. Coincidence Unit
Report containing a diagram of a coincidence unit, outlining resistor values and other technical specifications.
A 2-GHz Rectangular Corrugated Horn
We have designed, constructed and tested a large, rectangular horn antenna with a center frequency of 2.0 GHz, corrugated on the E-plane walls, made out of aluminum sheet. A new technique has been developed to solder thin aluminum strips onto the back plane to form the corrugations. The radiation beam pattern shows half-power beamwidths of 12{sup 0} and 14{sup 0} in the H and E planes respectively, and side lobe response below -40 dB at angles greater than 50{sup 0} from horn axis. The measured return loss is less than -20 dB (VSWR < 1.22) between 1.7 and 2.3 GHz; insertion loss is less than 0.15 dB.
2 Hz, 30 T Split Pulse Water Cooled Magnet for Neutron Scattering Experiments (Materials Characterization and Design Options)
No Description Available.
2 Letters from concerned citizens in response to the recommendation regarding the Defense Office of Hearings and Appeals in Fort Meade
Community Correspondence - 2 Letters from concerned citizens in response to the recommendation regarding the Defense Office of Hearings and Appeals in Fort Meade
2 letters from George H. Newman in response to the recommendations regarding Eglin Air Force Base
Community Correspondence - 2 letters from George H. Newman in response to the recommendations regarding Eglin Air Force Base
A 2-Liter, 2000 MPa Air Source for the Radiatively Driven Hypersonic Wind Tunnel
The A2 LITE is a 2 liter, 2000 MPa, 750 K ultra-high pressure (UHP) vessel used to demonstrate UHP technology and to provide an air flow for wind tunnel nozzle development. It is the largest volume UHP vessel in the world. The design is based on a 100:1 pressure intensification using a hydraulic ram as a low pressure driver and a three-layer compound cylinder UHP section. Active control of the 900 mm piston stroke in the 63.5 mm bore permits pressure-time profiles ranging from static to constant pressure during flow through a 1 mm throat diameter nozzle for 1 second.
N = 2 Maxwell-Einstein Supergravity Theories: Their Compact and Non-Compact Gaugings and Jordan Algebras
In this talk we give a review of our work on the construction and classification of N = 2 Maxwell-Einstein Supergravity theories (MESGT), study of the underlying algebraical and geometrical structure of these theories, and their compact and non-compact gaugings. We begin by summarizing our construction of the N = 2 MESGT's in five dimensions and give a geometrical interpretation to various scalar dependent quantities in the Lagrangian, based on the constraiants implied by supersymmetry. This is followed by a complete classification of the N = 2 MESGT's whose target manifolds parametrized by the scalar fields are symmetric spaces. 39 refs.
2 meg-ampere prototype levitated coil for multipole fusion
The coils major diameter is 1.0 meter and it occupies a cross-section which is about 0.2 meter minor in diameter. The prototype coil will carry four times the current of the largest such magnet built to date. As a result, the peak induction in the coil is about 8 T and the stored magnetic energy will be around 3 MJ. The paper describes the proposed Nb/sub 3/SN superconductor, the quench protection system which is based on the LBL shorted secondary concept, the isochroic refrigeration storage system which stores about 5 kJ of refrigeration between 4.5/sup 0/K and 7/sup 0/K, and the persistent switch.
A 2-Megawatt load for testing high voltage dc power supplies
A high power water-cooled resistive load, capable of dissipating 2 Megawatts at 95 kilovolts is being designed and built. The load utilizes wirewound resistor elements suspended inside insulating tubing contained within a pressure vessel which is supplied a continuous flow of deionized water for coolant. A sub-system of the load is composed of non-inductive resistor elements in an oil tank. Power tests conducted on various resistor types indicate that dissipation levels as high as 22 times the rated dissipation in air can be achieved when the resistors are placed in a turbulent water flow of at least 15 gallons per minute. Using this data, the load w.as designed using 100 resistor elements in a series arrangement A single-wall 316 stainless steel pressure vessel with flanged torispherical heads is built to contain the resistor assembly and deionized water. The resistors are suspended within G-11 tubing which span the cylindrical length of the vessel. These tubes are supported by G-10 baffles which also increase convection from the tubes by promoting turbulence within the surrounding water.
A 2-MeV microwave thermionic gun
A high-gradient, S-band microwave gun with a thermionic cathode is being developed in a collaborative effort by AET, Varian, and SSRL. A prototype design using an upgraded Varian dispenser cathode mounted with thermal isolation directly in the first half-cell of a 1-1/2 cell, side-coupled, standing-wave cavity has been fabricated and is being tested. Optimization of the cavity shape and beam formation was done using SUPERFISH, MASK, and PARMELA. An overview of design details, as well as the status of in-progress beam tests, will be presented. 9 refs., 6 figs.
2-mm microwave interferometer
A 2-mm microwave interferometer has been developed, and phase shift measurements have been made on the Baseball II experiment. The interferometer system employs a 140-GHz receiver for double down conversion of the plasma signal to a 60-MHz, IF frequency. The 140-GHz references signal is also down-converted and compared with the plasma signal to provide the desired phase change of the signal passing through the plasma. A feedback voltage from a 60-MHz discriminator to a voltage-controlled oscillator in the receiver provides frequency stability of the 60-MHz IF signals.
2-MV electrostatic quadrupole injector for heavy-ion fusion
High current and low emittance are principal requirements for heavy-ion injection into a linac driver for inertial fusion energy. An electrostatic quadrupole (ESQ) injector is capable of providing these high charge density and low emittance beams. We have modified the existing 2-MV Injector to reduce beam emittance and to double the pulse length. We characterize the beam delivered by the modified injector to the High Current Transport Experiment (HCX) and the effects of finite rise time of the extraction voltage pulse in the diode on the beam head. We demonstrate techniques for mitigating aberrations and reducing beam emittance growth in the injector.
2 MV Injector as the Elise Front-End and as an Experimental Facility
We report on progress in the preparation of the 2 MV Injector at LBNL as the front-end of Elise, and as a multi-purpose experimental facility for Heavy Ion Fusion beam dynamics studies. Recent advances on the performance and understanding of the injector are described, and some of the on-going experimental activities are summarized.
A 2-MV multi-beam injector for heavy ion fusion
Construction of a sixteen beam (0.5 A per beam) injector for use in scaled heavy ion fusion experiments is underway at LBL. The machine was designed and partially constructed at LANL. The injector is designed to use carbon arc sources which will provide 25 mA/cm/sup 2/ of extractable current density. The plasma from the arcs is confined electrostatically from drifting into the ion gun before firing the extraction pulse. The acceleration column consists of a set of aperture lenses which both transport the beam and attenuate backstreaming electrons. The acceleration column is mounted inside a 28-inch diameter brazed alumina insulating module. The high voltage for the injector is provided by an inductively loaded and graded Marx generator which resides inside a pressure vessel filled with a 65 psig mixture of 30/percent/ SF/sub 6/ and 70/percent/ N/sub 2/. Data is presented showing the performance of single and multiple carbon arc sources. Measurements show that adequate current density is available. Emittance measurements and efforts to improve emittance and reproducibility are shown. Tests with a 5-tray section of the full 18 tray generator are described showing the evolution of the generator design. 5 refs., 3 figs.
2 MW 110 GHz ECH heating system for DIII-D
A 2 MW 110 GHz ECH system using Varian 0.5 MW gyrotrons is under construction for use on the DIII-D tokamak by late 1991. Most of the components are being design and fabricated at General Atomics, including the gyrotron tanks, superconducting magnets, and transmission line. These components are intended for operation with 10 second pulses and, in the future, with 1 MW gyrotrons. 6 refs., 5 figs.
2-MW plasmajet facility thermal tests of concrete. [PWR and BWR]
A test was made in the 2-Megawatt Plasmajet Facility to obtain experimental data relative to the thermal response of concrete to incident heat flux. 14.6 cm diameter by 8.0 cm long concrete cylinders were positioned in a supersonic flow of heated nitrogen from an arc heater. The end of the concrete cylinders impacted by the flow were subjected to heat fluxes in the range of 0.13 to 0.35 kW/cm/sup 2/. Measurements included cold wall surface heat flux and pressure distributions, surface and indepth temperatures, ablation rates, and surface emission spectrographs. The test was part of the Sandia light water reactor safety research program and complements similar tests made in the Radiant Heat Facility at heat fluxes from 0.03 to 0.12 kW/cm/sup 2/. A description of the tests and a tabulation of test data are included.
2 MW upgrade of the Fermilab Main Injector
In January 2002, the Fermilab Director initiated a design study for a high average power, modest energy proton facility. An intensity upgrade to Fermilab's 120-GeV Main Injector (MI) represents an attractive concept for such a facility, which would leverage existing beam lines and experimental areas and would greatly enhance physics opportunities at Fermilab and in the U.S. With a Proton Driver replacing the present Booster, the beam intensity of the MI is expected to be increased by a factor of five. Accompanied by a shorter cycle, the beam power would reach 2 MW. This would make the MI a more powerful machine than the SNS or the J-PARC. Moreover, the high beam energy (120 GeV) and tunable energy range (8-120 GeV) would make it a unique high power proton facility. The upgrade study has been completed and published. This paper gives a summary report.
2-Page Summary for Neptunium solubility in the Near-field Environment of A Proposed Yucca Mountain Repository
The total system performance assessment (TSPA) for the proposed repository at Yucca Mountain, NV, includes a wide variety of processes to evaluate the potential release of radionuclides from the Engineered Barrier System into the unsaturated zone of the geosphere. The principal processes controlling radionuclide release and mobilization from the waste forms are captured in the model to assess the dissolved concentrations of radionuclides in the source-term. The TSPA model of the source-term incorporates the far-from-equilibrium dissolution of, for example, spent nuclear fuel (SNF) to capture bounding rates of radionuclide availability as the SNF degrades. In addition, for individual radionuclides, the source-term model evaluates solubility constraints that are more indicative of longer-term, equilibrium processes that can limit the potential mass transport from the source term in those cases. These solubility limits represent phase saturation and precipitation processes that can occur either at the waste form as it alters, or at other locations in the near-field environment (e.g., within the invert) if chemical conditions are different. Identification and selection of applicable constraints for solubility-limited radionuclide concentrations is a primary focus in formulating the source-term model for the TSPA. Neptunium is a long-lived radionuclide that becomes a larger fraction of the potential dose as radioactive decay of other radionuclides proceeds. To delineate appropriate long-term source-term controls on dissolved neptunium concentrations, a number of alternative models have been defined. The models are based on data both collected within the Yucca Mountain Project and taken from published literature, and have been evaluated against independent data sets to assess their applicability. The alternative models encompass ones based on precipitation of neptunium within its own separate oxide phases (i.e., ''pure'' Np-phases), and those where neptunium is incorporated into the secondary (tertiary, quaternary, etc.) uranyl phases forming as alteration products of SNF (secondary phases). The constraints on dissolved …
2-pi Photoproduction from CLAS and CB-ELSA - The Search for Missing Resonances
2-pi-photoproduction is one of the promising reactions to search for baryon resonances that have been predicted but have not yet been observed. The gamma-rho --> rho-pi{sup 0}-pi{sup 0}(CB-ELSA) and the gamma-rho --> rho-pi{sup +}-pi{sup -} (CLAS) data show interesting resonance structures. A partial wave analysis (PWA) has to be done to determine which baryon resonances contribute what their quantum numbers and their relative couplings to the different accessible rho-2-pi-channels and to the photon are. First preliminary PWA-results on the lowest energy rho-pi{sup 0}-pi{sup 0} data (sq rt s<1.8 GeV)look very promising. From an extension of this analysis to higher energies combining the rho-pi{sup 0}-pi{sup 0} and the rho-pi{sup +}-pi{sup -}-data, one can expect; interesting results on resonances decaying into Delta-pi, N-rho, N(pi-pi)s, N*-pi, and Delta*-pi.
2, Pulse-mode expansions and refractive indices in plane-wave propagation
This memo presents basic background theory for treating simultaneous propagation of electromagnetic pulses of various colors, directed along a common ray, through a molecular vapor. The memo discusses some techniques for expanding the positive frequency part of the transverse electric field into pulse modes, characterized by carrier frequencies within a modulated envelope. We discuss, in the approximation of plane waves with slowly varying envelopes, a set of uncoupled envelope equations in which a polarization mode-envelope acts as a source for an electric-field envelope. These equations, when taken with a prescription for the polarization field, are the basic equations of plane-wave pulse propagation through a molecular medium. We discuss two ways of treating dispersive media, one based upon expansions in the frequency domain and the other based in the time domain. In both cases we find envelope equations that involve group velocities. This memo represents a portion of a more extensive treatment of propagation to be presented separately. Many of the equations presented here have been described in various books and articles. They are collected and described here as a summary and review of contemporary theory.
2 Questions pertaining to DON-0133 and the non-BRAC Scenario (Portsmouth Naval Shipyard)
2 Questions pertaining to DON-0133 and the non-BRAC Senario (Portsmouth Naval Shipyard. Department of Defense Clearinghouse Response: DoD Clearinghouse reply to a letter from the BRAC Commission regarding 2 Questions pertaining to DON-0133 and the non-BRAC scenario (Portsmouth Naval Shipyard)
N = 2 string amplitudes
In physics, solvable models have played very important roles. Understanding a simple model in detail teaches us a lot about more complicated models in generic situations. Five years ago, C. Vafa and I found that the closed N = 2 string theory, that is a string theory with the N = 2 local supersymmetry on the worldsheet, is classically equivalent to the self-dual Einstein gravity in four spacetime dimensions. Thus this string theory is solvable at the classical level. More recently, we have examined the N = 2 string partition function for spacial compactifications, and computed it to all order in the string perturbation expansion. The fact that such computation is possible at all suggests that the N = 2 string theory is solvable even quantum mechanically.
2$sup 0$K vacuum pumping system for Baseball II
A vacuum pumping system that provides a cryo surface for condensing and freezing of H/sub 2/ gas is described. A closed-loop vacuum system was designed and built at Lawrence Livermore Laboratory to pump down the neutralizer LH/sub e/ dewar with a volurae of 350 l and the lambda point dewar with a LH/sub e/ volume of 250 l. Both of these dewars can be pumped down simultaneously or one at a time. 100% of the H/sub e/ gas is recovered free of contaminations. The vacuum pump can handle 340 SCFM of gas. The LH/sub e/ dewars are pumped down below the lambda point. This condition reduces the LH/sub e/ container wall temperature to 2.1 deg K giving a base pressure of 10/sup -13/ torr for H/sub 2/ gas/sup 2/. To attain a stable condition the LH /sub e/ baths are puuped down to 33 torr or lower to give a surface temperatare of about 2/sup 0/K/sup 3/. The Baseball II helium factlity is a close loop system. The H/sub e/ gas is recovered from all the LH/sub e/ usage point. This gas is accumulated in one of the two 8000 cu ft inflatable gas bags. The gas from the gas bags is compressed into storage tanks at 1800 psig. The gas is purified to 99.99999% and it is liquified at a rate of 100 liquid liters per hour. (auth)
2 {times} 2 TeV {mu}{sup +}{mu}{sup {minus}} collider: Lattice and accelerator-detector interface study
The design for a high-luminosity {mu}{sup +}{mu}{sup {minus}} superconducting storage ring is presented based on first-pass calculations. Special attention is paid to two Iowa interaction regions (IR) whose optics are literally interlaced with the collider detectors. Various sources of backgrounds in IR are explored via realistic Monte Carlo simulations. An improved design of the collider lattice in the neighborhood of the interaction points (EP) is determined by the need to reduce significantly background levels in the detectors.
A 2 to 4 nm high power FEL on the SLAC linac
We report the results of preliminary studies of a 2 to 4 nm SASE FEL, using a photoinjector to produce the electron beam, and the SLAC linac to accelerate it to an energy up to 10 GeV. Longitudinal bunch compression is used to increases ten fold the peak current to 2.5 kA, while reducing the bunch length to the subpicosecond range. The saturated output power is in the multi-gigawatt range, producing about 10{sup 14} coherent photons within a bandwidth of about 0.2% rms, in a pulse of several millijoules. At 120Hz repetition rate the average power is about 1 W. The system is optimized for x-ray microscopy in the water window around 2 to 4 nm, and will permit imaging a biological sample in a single subpicosecond pulse.
2 x 2 Polyethylene Reflected and Moderated Highly Enriched Uranium System with Rhenium
The 2 × 2 array HEU-Re experiment was performed on the Planet universal critical assembly machine on November 4th, 2003 at the Los Alamos Critical Experiments Facility (LACEF) at Los Alamos National Laboratory (LANL). For this experiment, there were 10 ½ units, each full unit containing four HEU foils and two rhenium foils. The top unit contained only two HEU foils and two rhenium foils. A total of 42 HEU foils were used for this experiment. Rhenium is a desirable cladding material for space nuclear power applications. This experiment consisted of HEU foils interleaved with rhenium foils and is moderated and reflected by polyethylene plates. A unit consisted of a polyethylene plate, which has a recess for rhenium foils, and four HEU foils in a single layer in the top recess of each polyethylene plate. The Planet universal criticality assembly machine has been previously used in experiments containing HEU foils interspersed with SiO2 (HEU-MET-THERM-001), Al (HEU-MET-THERM-008), MgO (HEU-MET-THERM-009), Gd foils (HEU-MET-THERM-010), 2 × 2 × 26 Al (HEU-MET-THERM-012), Fe (HEU-MET-THERM-013 and HEU-MET-THERM-015), 2 × 2 × 23 SiO2 (HEU-MET-THERM-014), 2 × 2 × 11 hastalloy plates (HEU-MET-THERM-016), and concrete (HEU-MET-THERM-018). The 2 × 2 array of HEU-Re is considered acceptable for use as a benchmark critical experiment.
2 x 2 TeV mu(superscript +) mu (superscript) collider
The scenarios for high-luminosity 2 x 2 TeV and 250 x 250 GeV {mu}{sup +}{mu}{sup -} colliders are presented. Having a high physics potential, such a machine has specific physics and technical advantages and disadvantages when compared with an e{sup +}e{sup -} collider. Parameters for the candidate designs and the basic components - proton source, pion production and decay channel, cooling, acceleration and collider storage ring - are considered. Attention is paid to the areas mostly affecting the collider performance: targetry, energy spread, superconducting magnet survival, detector backgrounds, polarization, environmental issues. 13 refs., 9 figs., 4 tabs.
3.1.1.2 Feed Processing and Handling DL2 Final Report
This milestone report is the deliverable for our Feed Processing and Handling project. It includes results of wet biomass feedstock analysis, slurry pumping information, fungal processing to produce a lignin-rich biorefinery residue and two subcontracted efforts to quantify the amount of wet biomass feedstocks currently available within the corn processing and paper processing industries.
3,2-HOPO Complexes of Near-Infra-Red (NIR) Emitting Lanthanides: Sensitization of Ho(III) and Pr(III) in Aqueous Solution
There is a growing interest in Near Infra-Red (NIR) emission originating from organic complexes of Ln{sup III} cations. As a major impetus, biological tissues are considerably more transparent at these low energy wavelengths when compared to visible radiation, which facilitates deeper penetration of incident and emitted light. Furthermore, the long luminescence lifetimes of Ln{sup III} complexes (eg. Yb{sup III}, {tau}{sub rad} {approx} 1 ms) when compared to typical organic molecules can be utilized to vastly improve signal to noise ratios by employing time-gating techniques. While the improved quantum yield of Yb{sub III} complexes when compared to other NIR emitters favors their use for bioimaging applications, there has also been significant interest in the sensitized emission from other 4f metals such as Ln = Nd, Ho, Pr and Er which have well recognized applications as solid state laser materials (eg. Nd {approx} 1.06 {micro}m, Ho {approx} 2.09 {micro}m), and in telecommunications (eg. Er {approx} 1.54 {micro}m) where they can be used for amplification of optical signals. As a result of their weak (Laporte forbidden) f-f absorptions, the direct excitation of Ln{sup III} cations is inefficient, and sensitization of the metal emission is more effectively achieved using the so-called antenna effect. We have previously examined the properties of several Eu{sup III} complexes which feature 1-hydroxypyridin-2-one (Fig. 1) as the light harvesting chromophore. While the 1,2-HOPO isomer was found to strongly sensitize Eu{sup III}, we noted the analogous Me-3,2-HOPO isomer does not, which prompted further investigation of the properties of this chromophore with other metals.
A 3.3 MJ, Rb + 1 driver design based on an integrated systems analysis
A computer model for systems analysis of heavy ion drivers has been developed and used to evaluate driver designs for inertial fusion energy (IFE). The present work examines a driver for a close-coupled target design that requires less total beam energy but also smaller beam spots sizes than previous target designs. Design parameters and a cost estimate for a 160 beam, 3.3 MJ driver using rubidium ions (A = 85) are reported, and the sensitivity of the results to variations in selected design parameters is given.
A 3.3 MJ, Rb{sup +1} Driver Design Based on an Integrated Systems Analysis
A computer model for systems analysis of heavy ion drivers has been developed and used to evaluate driver designs for inertial fusion energy (IFE). The present work examines a driver for a close-coupled target design that requires less total beam energy but also smaller beam spots sizes than previous target designs. Design parameters and a cost estimate for a 160 beam, 3.3 MJ driver using rubidium ions (A = 85) are reported, and the sensitivity of the results to variations in selected design parameters is given.
3,4,3-LI(1,2-HOPO): In Vitro Formation of Highly Stable Lanthanide Complexes Translates into Efficacious In Vivo Europium Decorporation
The spermine-based hydroxypyridonate octadentate chelator 3,4,3-LI(1,2-HOPO) was investigated for its ability to act as an antennae that sensitizes the emission of Sm{sup III}, Eu{sup III}, and Tb{sup III} in the Visible range (Φ{sub tot} = 0.2 - 7%) and the emission of Pr{sup III}, Nd{sup III}, Sm{sup III}, and Yb{sup III} in the Near Infra-Red range, with decay times varying from 1.78 μs to 805 μs at room temperature. The particular luminescence spectroscopic properties of these lanthanide complexes formed with 3,4,3-LI(1,2-HOPO) were used to characterize their respective solution thermodynamic stabilities as well as those of the corresponding La{sup III}, Gd{sup III}, Dy{sup III}, Ho{sup III}, Er{sup III}, Tm{sup III}, and Lu{sup III} complexes. The remarkably high affinity of 3,4,3-LI(1,2-HOPO) for lanthanide metal ions and the resulting high complex stabilities (pM values ranging from 17.2 for La{sup III} to 23.1 for Yb{sup III}) constitute a necessary but not sufficient criteria to consider this octadentate ligand an optimal candidate for in vivo metal decorporation. The in vivo lanthanide complex stability and decorporation capacity of the ligand were assessed, using the radioactive isotope {sup 152}Eu as a tracer in a rodent model, which provided a direct comparison with the in vitro thermodynamic results and demonstrated the great potential of 3,4,3-LI(1,2-HOPO) as a therapeutic metal chelating agent.
$3.5 Million in Savings Identified in Appleton Assessment: Plant-Wide Assessment Summary--Forest Products (Fact Sheet)
Summary of Appleton Paper, Inc.'s plant-wide assessment to identify energy and cost saving opportunities at the corporation's paper mill in West Carrollton, Ohio.
$3.6 Million in Savings Identified in AMCAST Assessment (Revised)
Summary of AMCAST Industrial Corporation's plant-wide assessment to identify energy and cost saving opportunities at the corporation's facility in Wapakoneta, Ohio.
3. 6 simplified methods for design
Simplified design analysis methods for elevated temperature construction are classified and reviewed. Because the major impetus for developing elevated temperature design methodology during the past ten years has been the LMFBR program, considerable emphasis is placed upon results from this source. The operating characteristics of the LMFBR are such that cycles of severe transient thermal stresses can be interspersed with normal elevated temperature operational periods of significant duration, leading to a combination of plastic and creep deformation. The various simplified methods are organized into two general categories, depending upon whether it is the material, or constitutive, model that is reduced, or the geometric modeling that is simplified. Because the elastic representation of material behavior is so prevalent, an entire section is devoted to elastic analysis methods. Finally, the validation of the simplified procedures is discussed.
The 3.8% Medicare Contribution Tax on Unearned Income, Including Real Estate Transactions
This reports summarizes a 3.8% Medicare contribution tax on unearned income and provides examples of how it is applied.
3.9 GHz superconducting accelerating 9-cell cavity vertical test results
The 3rd harmonic 3.9GHz accelerating cavity was proposed to improve the beam performance of the FLASH (TTF/DESY) facility [1]. In the frame of a collaborative agreement, Fermilab will provide DESY with a cryomodule containing a string of four cavities. In addition, a second cryomodule with one cavity will be fabricated for installation in the Fermilab photo-injector, which will be upgraded for the ILC accelerator test facility. The first 9-cell Nb cavities were tested in a vertical setup and they didn't reach the designed accelerating gradient [2]. The main problem was a multipactor in the HOM couplers, which lead to overheating and quenching of the HOM couplers. New HOM couplers with improved design are integrated in the next 9-cell cavities. In this paper we present all results of the vertical tests.
3.9 GHz superconducting accelerating 9-cell cavity vertical test results
No Description Available.
3-10 keV and 0. 1- to 2-MeV observations of four gamma-ray bursts
Four catalogued ..gamma..-ray bursts that occurred between 79/3/7 and 79/7/31 have been observed over the 3 to 10 keV range by a joint NRL/Los Alamos experiment on the Air Force P78-1 satellite. The bursts were also well observed by members of the interplanetary network. In this paper we present hardness ratios, x-ray/..gamma..-ray luminosity ratios, and time histories. The most significant results presented herein can be summarized as follows: (1) gamma-ray bursters can emit fairly strongly at x-ray energies near the time of the ..gamma.. burst with L/sub x//L/sub ..gamma../ approx. .02 (L/sub x/ approx. 10/sup 37/ ergs s/sup -1/, 3 to 10 keV, assuming a distance of 1 kpc); (2) the centroid of the x-ray emission generally lags the ..gamma..-ray centroid, but there is also evidence for one or more types of x-ray precursor activity; (3) the ..gamma..-ray hardness ratios were not highly variable for these particular events. However, there is some evidence that the ..gamma..-ray spectra softened near the ends of the bursts when the x-ray/..gamma..-ray ratios were high; (4) the x-ray/..gamma..-ray power law number index during times of the strongest ..gamma..-ray emission ranged from 0.8 to approx. 1.1 for the four bursts; (5) the x-ray tail of GB790307 probably can be modeled as the cooling of hot plasma generated during the ..gamma..-ray burst. Simple versions of this model can be used to estimate various source parameters. These estimates imply a distance of a few hundred to a few thousand pc; (6) gamma-ray bursters probably do not produce events similar to classical x-ray bursts independently of the ..gamma..-ray emission.
A 3-Axis Force Balanced Accelerometer Using a Single Proof-Mass
This paper presents a new method for wideband force balancing a proof-mass in multiple axes simultaneously. Capacitive position sense and force feedback are accomplished using the same air-gap capacitors through time multiplexing. Proof of concept is experimentally demonstrated with a single-mass monolithic surface micromachined 3-axis accelerometer.
3-body final states in peripheral heavy-ion collisions: nuclear clustering structure and projectile excitation revisited
Even though peripheral heavy-ion collisions are less violent than their central counterparts, the large energy exchange between the reactants often leaves the primary products in excited particle-unstable states whose subsequent decay leads to 3 or more nuclei emerging in the final exit channel. These post-reaction, predominantly sequential de-excitation processes can sometimes provide interesting structural information about the parent nuclei. In fact, provided these processes are well understood, one can employ them as probes for studying initial properties of the fragments. This report discusses results of two experiments that deal with (1) nonstatistical, rare decay modes of the projectile, and (2) internal excitation energy of the projectile- and target-like fragments in peripheral collisions. The physics addressed in each is different, but the experimental and data-analysis techniques are so similar that it is relevant to join them together.
A 3-D adaptive mesh refinement algorithm for multimaterial gas dynamics
Adaptive Mesh Refinement (AMR) in conjunction with high order upwind finite difference methods has been used effectively on a variety of problems. In this paper we discuss an implementation of an AMR finite difference method that solves the equations of gas dynamics with two material species in three dimensions. An equation for the evolution of volume fractions augments the gas dynamics system. The material interface is preserved and tracked from the volume fractions using a piecewise linear reconstruction technique. 14 refs., 4 figs.
3-D Analysis on Arbitrarily-Shaped Icrf Antennas and Faraday Shields
Cavity antennas with Faraday shields are proposed to couple ion cyclotron radio frequency power for heating fusion plasmas. This application requires small, high-power, low-frequency antennas. The results are presented of a theoretical study of the ICRF antennas being developed for this purpose at the Radio Frequency Test Facility (RFTF). The objectives of this work are to optimize experimental designs and to confirm test results. (MOW)
3-D Cavern Enlargement Analyses
Three-dimensional finite element analyses simulate the mechanical response of enlarging existing caverns at the Strategic Petroleum Reserve (SPR). The caverns are located in Gulf Coast salt domes and are enlarged by leaching during oil drawdowns as fresh water is injected to displace the crude oil from the caverns. The current criteria adopted by the SPR limits cavern usage to 5 drawdowns (leaches). As a base case, 5 leaches were modeled over a 25 year period to roughly double the volume of a 19 cavern field. Thirteen additional leaches where then simulated until caverns approached coalescence. The cavern field approximated the geometries and geologic properties found at the West Hackberry site. This enabled comparisons are data collected over nearly 20 years to analysis predictions. The analyses closely predicted the measured surface subsidence and cavern closure rates as inferred from historic well head pressures. This provided the necessary assurance that the model displacements, strains, and stresses are accurate. However, the cavern field has not yet experienced the large scale drawdowns being simulated. Should they occur in the future, code predictions should be validated with actual field behavior at that time. The simulations were performed using JAS3D, a three dimensional finite element analysis code for nonlinear quasi-static solids. The results examine the impacts of leaching and cavern workovers, where internal cavern pressures are reduced, on surface subsidence, well integrity, and cavern stability. The results suggest that the current limit of 5 oil drawdowns may be extended with some mitigative action required on the wells and later on to surface structure due to subsidence strains. The predicted stress state in the salt shows damage to start occurring after 15 drawdowns with significant failure occurring at the 16th drawdown, well beyond the current limit of 5 drawdowns.
3-D Characterization of the Structure of Paper and Paperboard and Their Application to Optimize Drying and Water Removal Processes and End-Use Applications
The three dimensional structure of paper materials plays a critical role in the paper manufacturing process especially via its impact on the transport properties for fluids. Dewatering of the wet web, pressing and drying will benefit from knowledge of the relationships between the web structure and its transport coefficients. The structure of the pore space within a paper sheet is imaged in serial sections using x-ray micro computed tomography. The three dimensional structure is reconstructed from these sections using digital image processing techniques. The structure is then analyzed by measuring traditional descriptors for the pore space such as specific surface area and porosity. A sequence of microtomographs was imaged at approximately 2 m intervals and the three-dimensional pore-fiber structure was reconstructed. The pore size distributions for both in-plane as well as transverse pores were measured. Significant differences in the in-plane (XY) and the transverse directions in pore characteristics are found and may help partly explain the different liquid and vapor transport properties in the in-plane and transverse directions. Results with varying sheet structures compare favorably with conventional mercury intrusion porosimetry data. Interestingly, the transverse pore structure appears to be more open with larger pore size distribution compared to the in plane pore structure. This may help explain the differences in liquid and vapor transport through the in plane and transverse structures during the paper manufacturing process and during end-use application. Comparison of Z-directional structural details of hand sheet and commercially made fine paper samples show a distinct difference in pore size distribution both in the in-plane and transverse direction. Method presented here may provide a useful tool to the papermaker to truly engineer the structure of paper and board tailored to specific end-use applications. The difference in surface structure between the top and bottom sides of the porous material, i.e. …
3-D Combinatorial Geometry in the MERCURY Monte Carlo Particle Transport Code
Lawrence Livermore National Laboratory is in the process of developing a new Monte Carlo Particle Transport code named MERCURY. This new code features a 3-D Combinatorial Geometry tracking algorithm. This paper details some of the characteristics of this Monte Carlo tracker
3-D Computations and Measurements of Accelerator Magnets for the APS
The Advanced Photon Source (APS), now under construction at Argonne National Laboratory (ANL), requires dipole, quadrupole, sextupole, and corrector magnets for each of its circular accelerator systems. Three-dimensional (3-D) field computations are needed to eliminate unwanted multipole fields from the ends of long quadrupole and dipole magnets and to guarantee that the flux levels in the poles of short magnets will not cause saturation. Measurements of the magnets show good agreement with the computations.
Back to Top of Screen