UNT Libraries Government Documents Department - 72 Matching Results

Search Results

Results: 1 - 24 next
open access

Advanced subsystems development. Second semi-annual progress report, April 1--October 1, 1978

Description: The concept design for a small (less than 10 MWe) solar thermal electric generating plant was completed using projected 1985 technology. The systems requirements were defined and specified. The components, including an engineering prototype for one 15 kWe module of the generating plant, were conceptually designed. Significant features of the small solar thermal power plant were identified as the following: (1) 15-kWe Stirling-cycle engine/alternator with constant power output; (2) 10-meter poin… more
Date: November 15, 1978
open access

Assessment of advanced coal-gasification processes. [AVCO high throughput gasification in process; Bell High Mass Flux process; CS-R process; and Exxon Gasification process]

Description: This report represents a technical assessment of the following advanced coal gasification processes: AVCO High Throughput Gasification (HTG) Process, Bell Single - Stage High Mass Flux (HMF) Process, Cities Service/Rockwell (CS/R) Hydrogasification Process, and the Exxon Catalytic Coal Gasification (CCG) Process. Each process is evaluated for its potential to produce SNG from a bituminous coal. In addition to identifying the new technology these processes represent, key similarities/differences… more
Date: June 1, 1981
Creator: McCarthy, J.; Ferrall, J.; Charng, T. & Houseman, J.
open access

City Smoke Ordinances and Smoke Abatement

Description: From Introduction: "In connection with the fuel investigations conducted by the Bureau of Mines much information has been accumulated as to the smoke abatement activities in various cities. The essential features of the information are presented in this report, which, it is believed, will be of public interest and benefit, especially to those communities that are just beginning organized effort to abate unnecessary smoke."
Date: 1912
Creator: Flagg, Samuel B.
open access

Civilian and military missions SP-100 preliminary user requirements

Description: This document defines the top level requirements of potential users of a space based nuclear electric power supply. This provides the SP-100 Project and information required to design the modular (10-1000 KWe) space power systems to meet the needs of most potential users.
Date: June 29, 1987
open access

Control of Metallurgical and mineral dusts and fumes in Los Angeles County, California

Description: Report issued by the U.S. Bureau of Mines discussing metallurgical and mineral fumes and dusts in Los Angeles County, California. Properties of dusts and fumes from different minerals are presented. This report includes tables, maps, illustrations, and photographs.
Date: April 1952
Creator: Allen, Glenn L.; Viets, Floyd H. & McCabe, Louis C.
open access

Cost of energy from utility-owned solar electric systems. A required revenue method for ERDA/EPRI evaluations

Description: This methodology calculates the electric energy busbar cost from a utility-owned solar electric system. This approach is applicable to both publicly- and privately-owned utilities. Busbar cost represents the minimum price per unit of energy consistent with producing system-resultant revenues equal to the sum of system-resultant costs. This equality is expressed in present value terms, where the discount rate used reflects the rate of return required on invested capital. Major input variables de… more
Date: June 1, 1976
open access

Development of alternative oxygen production source using a zirconia solid electrolyte membrane

Description: The objective of this multiyear effort was the development, fabrication and testing of a zirconia oxygen production module capable of delivering approximately 100 liters/minute (LPM) of oxygen. The work discussed in this report consists of development and improvement of the zirconia cell along with manufacture of cell components, preliminary design of the final plant, additional economic analysis and industrial participation. (VC)
Date: August 1, 1990
Creator: Suitor, J. W.; Clark, D. J. & Losey, R. W.
open access

Development of alternative oxygen production source using a zirconia solid electrolyte membrane. Final report

Description: The objective of this multiyear effort was the development, fabrication and testing of a zirconia oxygen production module capable of delivering approximately 100 liters/minute (LPM) of oxygen. The work discussed in this report consists of development and improvement of the zirconia cell along with manufacture of cell components, preliminary design of the final plant, additional economic analysis and industrial participation. (VC)
Date: August 1, 1990
Creator: Suitor, J. W.; Clark, D. J. & Losey, R. W.
open access

Development of Bypassed Oil Reserves Using Behind Casing Resistivity Measurements

Description: Tubing and rods of the S.P. Pedro-Nepple No.1 well were pulled and the well was prepared for running of Schlumberger's Cased Hole Formation Resistivity Tool (CHFR) in selected intervals. The CHFR tool was successfully run and data was captured. The CHFR formation resistivity readings were compared to original open hole resistivity measurements. Separation between the original and CHFR resistivity curves indicate both swept and un-swept sand intervals. Both watered out sand intervals and those w… more
Date: April 2, 2006
Creator: Conner, Michael G. & Blesener, Jeffrey A.
open access

Direct Conversion Technology

Description: The overall objective of the Direct Conversion Technology task is to develop an experimentally verified technology base for promising direct conversion systems that have potential application for energy conservation in the end-use sectors. Initially, two systems were selected for exploratory research and advanced development. These are Alkali Metal Thermal-to-Electric Converter (AMTEC) and Two-Phase Liquid Metal MD Generator (LMMHD). This report describes progress that has been made during the … more
Date: July 1, 1992
Creator: Back, L.H.; Fabris, G. & Ryan, M.A.
open access

Direct conversion technology

Description: The overall objective of the Direct Conversion Technology task is to develop an experimentally verified technology base for promising direct conversion systems that have potential application for energy conservation in the end-use sectors. This report contains progress of research on the Alkali Metal Thermal-to-Electric Converter (AMTEC) and on the Two-Phase Liquid-Metal MHD Electrical Generator (LMMHD) for the period January 1, 1991 through December 31, 1991. Research on AMTEC and on LMMHD was… more
Date: January 7, 1992
Creator: Massier, P.F.; Back, L.H.; Ryan, M.A. & Fabris, G.
open access

Direct conversion technology: Annual summary report CY 1988

Description: The overall objective of the Direct Conversion Technology task is to develop an experimentally verified technology base for promising direct thermal-to-electric energy conversion systems that have potential application for energy conservation in the end-use sectors. This report contains progress of research on the Alkali Metal Thermal-to-Electric Converter (AMTEC), and on the Two-Phase Liquid-Metal MHD Electrical Generator (LMMHD) for the period January 1988 through December 1988. Research on t… more
Date: December 1, 1988
Creator: Massier, P. F.; Bankston, C. P.; Fabris, G. & Kirol, L. D.
open access

Direct conversion technology. Annual summary report CY 1991, January 1, 1991--December 31, 1991

Description: The overall objective of the Direct Conversion Technology task is to develop an experimentally verified technology base for promising direct conversion systems that have potential application for energy conservation in the end-use sectors. This report contains progress of research on the Alkali Metal Thermal-to-Electric Converter (AMTEC) and on the Two-Phase Liquid-Metal MHD Electrical Generator (LMMHD) for the period January 1, 1991 through December 31, 1991. Research on AMTEC and on LMMHD was… more
Date: January 7, 1992
Creator: Massier, P. F.; Back, L. H.; Ryan, M. A. & Fabris, G.
open access

Direct Conversion Technology. Progress report, January 1, 1992--June 30, 1992

Description: The overall objective of the Direct Conversion Technology task is to develop an experimentally verified technology base for promising direct conversion systems that have potential application for energy conservation in the end-use sectors. Initially, two systems were selected for exploratory research and advanced development. These are Alkali Metal Thermal-to-Electric Converter (AMTEC) and Two-Phase Liquid Metal MD Generator (LMMHD). This report describes progress that has been made during the … more
Date: July 1, 1992
Creator: Back, L. H.; Fabris, G. & Ryan, M. A.
open access

Electrical characterization of electrophoretically coated aluminum samples for photovoltaic concentrator application

Description: The practicality of using a thin-film styrene/acrylate copolymer electrophoretic coating to isolate concentrator cells electrically from their surroundings in a photovoltaic concentrator module is assessed. Only the electrical isolation problem was investigated. The approach was to subject various types of EP-coated aluminum specimens to electrical stress testing and to aging tests while monitoring coating electrical resistivity properties. It was determined that, in general, longer processing … more
Date: October 1, 1992
Creator: Sugimura, R. S.; Mon, G. R. & Ross, R. G. Jr.
open access

Electron cyclotron resonance deposition of amorphous silicon alloy films and devices

Description: This report describes work to develop a state-of-the-art electron cyclotron resonance (ECR) plasma-enhanced chemical vapor deposition (PECVD) system. The objective was to understand the deposition processes of amorphous silicon (a-Si:H) and related alloys, with a best-effort improvement of optoelectronic material properties and best-effort stabilization of solar cell performance. ECR growth parameters were systematically and extensively investigated; materials characterization included constant… more
Date: October 1, 1992
Creator: Shing, Y. H. (Jet Propulsion Lab., Pasadena, CA (United States))
open access

Electron cyclotron resonance deposition of amorphous silicon alloy films and devices. Final subcontract report, 1 April 1991--31 March 1992

Description: This report describes work to develop a state-of-the-art electron cyclotron resonance (ECR) plasma-enhanced chemical vapor deposition (PECVD) system. The objective was to understand the deposition processes of amorphous silicon (a-Si:H) and related alloys, with a best-effort improvement of optoelectronic material properties and best-effort stabilization of solar cell performance. ECR growth parameters were systematically and extensively investigated; materials characterization included constant… more
Date: October 1, 1992
Creator: Shing, Y. H.
open access

Energy conservation in citrus processing. Final project report

Description: Alternative energy conserving systems for use in citrus processing plants were synthesized and evaluated in terms of energy savings and economic return. The energy intensive operations that are carried out in citrus processing plants include conveying and extraction, concentration, peel drying, refrigeration, and pasteurization. The alternative energy conserving systems are synthesized from components and subsystems that are arranged to make use of energy cascading and thermodynamic regeneratio… more
Date: November 1, 1981
Creator: Leo, M. A.; Lari, R. I.; Moore, N. R.; Broussard, M. R. & Gyamfi, M.
open access

Energy conservation in citrus processing. Technical progress report No. 2, April 1, 1980-February 28, 1981

Description: Systems that reduce energy usage and are economically viable in the citrus fruit processing industry are identified. The preliminary results of Phase I are presented. Alternative systems to be considered are classified and denoted as central, modular, integrated, and combined. Progress is reported on the central and modular systems. (MCW)
Date: March 15, 1981
Creator: Leo, M. A.; Lari, R. I.; Moore, N. R.; Broussard, M. R. & Gyamfi, M.
open access

Energy conservation in citrus processing. Technical progress report, October 1, 1979-March 31, 1980

Description: The Sunkist Citrus Plant in Ontario, California, processes about 6 million pounds of citrus fruit per day to make products which include frozen concentrated juice; chilled, pasteurized, natural strength juice; molasses from peel; dried meal from peel; pectin; citrus oil; and bioflavonoids. The energy intensive operations at the plant include concentration, drying, and refrigeration. The objective of the two-year two-phase project is to identify an economically viable alternative to the existing… more
Date: June 15, 1980
open access

Evaluation and verification of epitaxial process sequence for silicon solar-cell production. Final program summary report

Description: Progress, present status, and data are presented for work in the areas of silicon substrate materials epitaxial substrates and epitaxial growth and of solar cells production process sequence determination especially, and also in the areas of process specification, minimodule design, process and design verification, and cost evaluation and projections. (LEW)
Date: November 1, 1981
Creator: Redfield, D.
open access

Fixed tilt solar collector employing reversible vee-trough reflectors and vacuum tube receivers for solar heating and cooling systems. Final report. JPL Publication 77-78

Description: The objective of the Vee-Trough/Vacuum Tube Collector (VTVTC) Project was to prove the usefulness of vee-trough concentrators in improving the efficiency and reducing the cost of collectors assembled from evacuated tube receivers. The VTVTC was analyzed rigorously and various mathematical models were developed to calculate the optical performance of the vee-trough concentrator and the thermal performance of the evacuated tube receiver. A test bed was constructed to verify the mathematical analy… more
Date: December 1, 1977
Creator: Selcuk, M. K.
Back to Top of Screen