UNT Libraries Government Documents Department - 22,455 Matching Results

Search Results

1995 Midnite Mine Radiation Survey

Description: Abstract: During the week of September 4, 1995, personnel from the U.S. Bureau of Mines conducted a Ra-226 survey at the Midnite Mine. One hundred thirty measurements were made on a rectangular grid with 150-m spacings. Concurrently, Shepherd Miller, Inc., took gross gamma readings in gR/h at the same grid points. In addition, the USBM collected 17 soil samples to be analyzed for radium, thorium, and potassium. The results of this survey are summarized in this report.
Date: 1996
Creator: Stroud, William P. & Droullard, Robert F.

2006 Sea Turtle and Pelagic Fish Sensory Physiology Workshop, September 12-13, 2006

Description: From summary: This report summarizes the findings reported by collaborating scientists at the 4th Sea Turtle and Pelagic Fish Sensory Physiology Workshop hosted by the Virginia Institute of Marine Sciences Eastern Shore Laboratory in Wachapregue, Virginia during September 12-13, 2006...The primary objective of the research is to develop techniques and/or commercially viable devices that eliminate or substantially reduce interactions of sea turtles with longline fishing gear while not reducing catch rates of the targeted fish species to unacceptable levels.
Date: October 2007
Creator: Swimmer, Yonat & Wang, John H.

2012 Economic Cost Earnings of Pelagic Longline Fishing in Hawaii

Description: From abstract: This report presents findings from the Pacific Islands Fisheries Science Center (PIFSC) cost-earnings study of the Hawaii-based longline fishery fleet which primarily targets bigeye tuna and swordfish...This report also compares 2012 results with the previous cost-earnings studies of the Hawaii longline fleet that examines the economic profiles of the fleet for 2000 and 2005 operations.
Date: October 2016
Creator: Kalberg, Kolter & Pan, Minling

²³⁵U(n,f), ²³⁸U(n, gamma), ²³⁸U(n,f), ²³⁹Pu(n,f) Reaction Rate Measurement Calibrations at ZPPR

Description: New reference deposits for uranium-235, plutonium-239 and uranium-238 have been established with mass uncertainties of <0.2%. These new deposits replace the older reference deposits which were used during the last 17 years and improve the uncertainty of reaction rate measurements due to reference mass uncertainties by about a factor of 6. Measurements of the fission fragment absorption in 2 pi and low-geometry count rates. Two measurements of the uranium-238 capture rate in depleted uranium samples based upon the thermal cross sections of uranium-238(n, gamma), uranium-235(n,f) and plutonium-239(n,f) and based upon the americium-243 calibration technique confirm the ZPPR measurement technique within the quoted uncertainty of +/-0.5%
Date: January 1987
Creator: Poenitz, W. P.; Maddison, D. W.; Gasidlo, J. M.; Carpenter, S.G. & Armani, R. J.

3DTOM, Three-Dimensional Geophysical Tomography

Description: Abstract: 3DTOM is a DOS-compatible computer program developed by the Mines U.S. Bureau of for three-dimensional tomographic imaging of the subsurface at mine sites. The program uses the simultaneous iterative reconstruction technique (SIRT) to invert travel- time data and produce maps of wave velocity, or to invert amplitude data and generate maps of wave attenuation coefficients. Either seismic (compressional and/or shear) or electromagnetic (e.g., radio or radar) wave data may be used. Ray tracing in 3DTOM uses several different methods, including ray bending, network theory, and a combination of these. User-defined constraints are important in reducing the mathematical nonuniqueness of inversions based on limited data. 3DTOM permits the use of hard constraints, or soft constraints based on fuzzy logic, to allow for uncertainty in the constraints. Reliable subsurface images are useful in many different mine-related problems, including void detection, fracture detection, fluid monitoring, and qualitative stress evaluation.
Date: 1996
Creator: Jackson, M. J. & Tweeton, Daryl R.

6144-Channel Time-of-Flight Analyzer

Description: Report describing a 6144-channel analyzer designed and built for the purpose of analyzing time-of-flight during studies of slow neutron scattering at Hanford Laboratories. This includes descriptions of the analyzer, its logic and circuits, and its test mode.
Date: September 1964
Creator: Walker, R. A. & Russell, J. T.

N.A.C.A. control position recorder

Description: Report discussing a new instrument is described which is capable of simultaneously recording the position of the three controls of an airplane. The records are taken photographically on a standard N.A.C.A. film drum and the instrument can be quickly installed in any airplane.
Date: May 1922
Creator: Norton, F. H.

N.A.C.A. Langley field wind tunnel apparatus: The tilting manometer

Description: A description is given of a tilting manometer designed to meet the requirements of a manometer for use in the wind tunnel at the Langley Memorial Aeronautical Laboratory. This gauge was designed to meet the requirements of a manometer in use in connection with a static pressure plate to indicate the wind speed in the tunnel. The requirements are noted. The sensitivity of the gauge must be made inversely proportional to the pressure to be measured. The gauge must be accurately and quickly set for any desired pressure.
Date: January 1921
Creator: Norton, F. H. & Bacon, D. L.

N.A.C.A. recording air speed meter

Description: A new type of air speed meter is described which was designed by the technical staff of the National Advisory Committee for Aeronautics. The instrument consists essentially of a tight metal diaphragm of high natural period which is acted upon by the pressure difference of a pitot-static head. The resulting deflection of this diaphragm is recorded optically on a moving film.
Date: October 1921
Creator: Norton, F. H.

N.A.C.A. Stall-Warning Device

Description: With some airplanes the approach to the stall is accompanied by changes in the behavior, such as tail buffeting or changes in the control characteristics of the airplane so that the pilot obtains a warning of the impending stall. Vith other airplanes it is possible to approach the stall without any perceptible warning other than the reading of the air-speed meter, in which case the danger of inadvertent stalling is considerably greater. Although it is not within the scope of this paper to discuss stalling characteristics, it is desired to point out that in general the danger of inadvertent stalling is greatest with those airplanes that behave worse when the stalling occurs; that is, with airplanes in which the stall starts at the wing tips. A warning of the impending stall is desirable in any case, but is particularly desirable with airplanes of the latter type.
Date: February 1938
Creator: Thompson, F. L.

Abacus giving the variation of the mean pressure of an aviation engine as a function of its speed of rotation

Description: Comparing the results of the calculations for computing the mean pressure of an aviation engine for any number of revolutions, with those of experiment, the writer, by numerous examples, shows the perfect agreement between them. This report will show that, by means of a special abacus, an engineer can instantly plot the characteristics of an engine.
Date: March 1921
Creator: Margoulis, W

Ability of pilots to control simulated short-period yawing oscillations

Description: Report discussing an investigation into the ability of human pilots to control short-period yawing oscillations using a yaw simulating device. The ability to control the oscillations was determined to be a function of period, control effectiveness, and inherent damping. Pilot control effectiveness was found to improve with practice.
Date: November 13, 1950
Creator: Phillips, William H. & Cheatham, Donald C.