UNT Libraries Government Documents Department - 30,066 Matching Results

This system will be undergoing maintenance April 18th between 9:00AM and 12:00PM CDT.

Search Results

open access

0-2 kv Flash Tube Supplies

Description: In order to perform the various experiments with a bubble chamber, a high intensity flash tube is used. This report briefly describes the power supplies designed and constructed to power these lamps.
Date: March 15, 1962
Creator: Miller, D. M.
open access

0-2 kv Flash Tube Supplies

Description: The power supplies designed and constructed to power high-intensity flash tubes are described. Three supplies, capable of charging 100 mfd to 2 kv with a repetltion rate of not less than 0.8 sec, are operated remotely from a control panel containing 3 powerstats. The power supplies are full wave center trapped rectifiers employing silicon rectifiers. (M.C.G.)
Date: March 15, 1962
Creator: Miller, D. M.
open access

1.2 MW klystron for Asymmetric Storage Ring B Factory

Description: A cw klystron operating at 476 MHz has been developed jointly by SLAC and Varian Associates. The unique set of characteristics of this tube were strongly guided by requirements of the fast feedback necessary to prevent oscillations of the storage ring beams caused by the detuned accelerating cavity. This requires a combination of bandwidth and short group delay within the klystron. The RF feedback stabilization scheme also requires amplitude modulation making it necessary to operate the klystro… more
Date: March 1995
Creator: Fowkes, W. R.; Caryotakis, G. & Doyle, E.
open access

1.3 GHz superconducting RF cavity program at Fermilab

Description: At Fermilab, 9-cell 1.3 GHz superconducting RF (SRF) cavities are prepared, qualified, and assembled into cryomodules (CMs) for Project X, an International Linear Collider (ILC), or other future projects. The 1.3 GHz SRF cavity program includes targeted R&D on 1-cell 1.3 GHz cavities for cavity performance improvement. Production cavity qualification includes cavity inspection, surface processing, clean assembly, and one or more cryogenic low-power CW qualification tests which typically inc… more
Date: March 1, 2011
Creator: Ginsburg, C. M.; Arkan, T.; Barbanotti, S.; Carter, H.; Champion, M.; Cooley, L. et al.
open access

1-D Van der Waals Foams Heated by Ion Beam Energy Deposition

Description: One dimensional simulations of various initial average density aluminum foams (modeled as slabs of solid metal separated by low density regions) heated by volumetric energy deposition are conducted with a Lagrangian hydrodynamics code using a van der Waals equation of state (EOS). The resulting behavior is studied to facilitate the design of future warm dense matter (WDM) experiments at LBNL. In the simulations the energy deposition ranges from 10 to 30 kJ/g and from 0.075 to 4.0 ns total pulse… more
Date: March 19, 2010
Creator: Zylstra, A; Barnard, J J & More, R M
open access

O(1/M{sup 3}) effects for heavy-light mesons in lattice NRQCD

Description: The masses of spin-singlet and spin-triplet S-wave mesons containing a single heavy quark are computed in the quenched approximation. The light quark action and gauge field action are both classically-improved and tadpole-improved, and the couplings to the heavy quark are organized by the 1/M expansion of tadpole-improved NRQCD. At each of two lattice spacings, near 0.22fm and 0.26fm, meson masses are obtained for heavy quarks spanning the region between charmed and bottom mesons. Results up to… more
Date: March 1998
Creator: Lewis, Randy & Woloshyn, R. M.
open access

1/N

Description: There exist families of field theories with symmetry group SO(N) (or SU(N)) that become simpler as N becomes larger. More precisely, the solutions to these theories possess an expansion in powers of 1/N. This expansion is the subject of these lectures. The 1/N expansion can be used to analyze model field theories. The 1/N expansion is developed for phi/sup 4/ theory and applied to two two-dimensional models with similar combinatoric structures, the Gross-Neveu model and the CP/sup N-1/ model. T… more
Date: March 1, 1980
Creator: Coleman, S.
open access

1 Outreach, Education and Domestic Market Enhancement 2 Export Promotion and Assistance

Description: Geothermal Energy Association supports the US geothermal industry in its efforts to bring more clean geothermal energy on-line throughout the world. Activities designed to accomplish this goal include: (1) developing and maintaining data bases, web pages, (2) commissioning of special studies and reports, (3) preparing, printing and distributing brochures and newsletters, (4) developing exhibits and displays, and participating in trade shows, (5) designing, producing and disseminating audio-vide… more
Date: March 15, 2004
Creator: Geothermal Energy Association
open access

2-1/2-dimensional numerical solution for the electromagnetic scattering using a hybrid technique

Description: The use of the electromagnetic method for geothermal reservoir exploration and delineation was studied. A number of techniques were developed to provide high quality field data. The remaining problem of interpreting these data in regions of complex geologic structure was overcome by the development of a numerical solution based on the hybrid technique, making use of both the finite element and the integral equation techniques. The major improvement is in the computing speed. (ACR)
Date: March 1, 1983
Creator: Lee, K. H. & Morrison, H. F.
open access

2-mm microwave interferometer

Description: A 2-mm microwave interferometer has been developed, and phase shift measurements have been made on the Baseball II experiment. The interferometer system employs a 140-GHz receiver for double down conversion of the plasma signal to a 60-MHz, IF frequency. The 140-GHz references signal is also down-converted and compared with the plasma signal to provide the desired phase change of the signal passing through the plasma. A feedback voltage from a 60-MHz discriminator to a voltage-controlled oscill… more
Date: March 1, 1977
Creator: Futch, A. H. & Mortensen, W. K.
open access

2-Page Summary for Neptunium solubility in the Near-field Environment of A Proposed Yucca Mountain Repository

Description: The total system performance assessment (TSPA) for the proposed repository at Yucca Mountain, NV, includes a wide variety of processes to evaluate the potential release of radionuclides from the Engineered Barrier System into the unsaturated zone of the geosphere. The principal processes controlling radionuclide release and mobilization from the waste forms are captured in the model to assess the dissolved concentrations of radionuclides in the source-term. The TSPA model of the source-term inc… more
Date: March 29, 2005
Creator: Sassani, D.; van Luik, A. & Summerson, J.
open access

A 3.3 MJ, Rb + 1 driver design based on an integrated systems analysis

Description: A computer model for systems analysis of heavy ion drivers has been developed and used to evaluate driver designs for inertial fusion energy (IFE). The present work examines a driver for a close-coupled target design that requires less total beam energy but also smaller beam spots sizes than previous target designs. Design parameters and a cost estimate for a 160 beam, 3.3 MJ driver using rubidium ions (A = 85) are reported, and the sensitivity of the results to variations in selected design pa… more
Date: March 7, 2000
Creator: Meier, W. R.; Barnard, J. J. & Bangerter, R. O.
open access

3-D Cavern Enlargement Analyses

Description: Three-dimensional finite element analyses simulate the mechanical response of enlarging existing caverns at the Strategic Petroleum Reserve (SPR). The caverns are located in Gulf Coast salt domes and are enlarged by leaching during oil drawdowns as fresh water is injected to displace the crude oil from the caverns. The current criteria adopted by the SPR limits cavern usage to 5 drawdowns (leaches). As a base case, 5 leaches were modeled over a 25 year period to roughly double the volume of a 1… more
Date: March 1, 2002
Creator: EHGARTNER, BRIAN L. & SOBOLIK, STEVEN R.
open access

3-d finite element model development for biomechanics: a software demonstration

Description: Finite element analysis is becoming an increasingly important part of biomechanics and orthopedic research, as computational resources become more powerful, and data handling algorithms become more sophisticated. Until recently, tools with sufficient power did not exist or were not accessible to adequately model complicated, three-dimensional, nonlinear biomechanical systems. In the past, finite element analyses in biomechanics have often been limited to two-dimensional approaches, linear analy… more
Date: March 1, 1997
Creator: Hollerbach, K.; Hollister, A.M. & Ashby, E.
open access

3-D Nonlinear Calculations of Resistive Tearing Modes

Description: Recent numerical calculations of the evolution of resistive tearing modes have been central to the understanding of magnetohydrodynamic activity and disruptions in tokamaks. The nonlinear, 3-D, initial-value computer code RSF has provided many of these results. This code assumes cylindrical geometry with a Fourier series representation in the two periodic coordinates and a finite-difference representation in the radial direction. This choice makes RSF considerably more accurate and efficient th… more
Date: March 1, 1981
Creator: Hicks, H. R.; Holmes, J. A.; Lee, D. K.; Carreras, B. & Waddell, B. V.
open access

3-D nonlinear evolution of MHD instabilities

Description: The nonlinear evolution of ideal MHD internal instabilities is investigated in straight cylindrical geometry by means of a 3-D initial-value computer code. These instabilities are characterized by pairs of velocity vortex cells rolling off each other and helically twisted down the plasma column. The cells persist until the poloidal velocity saturates at a few tenths of the Alfven velocity. The nonlinear phase is characterized by convection around these essentially fixed vortex cells. For exampl… more
Date: March 1, 1977
Creator: Bateman, G.; Hicks, H. R. & Wooten, J. W.
open access

A 3-D SAR approach to IFSAR processing

Description: Interferometric SAR (IFSAR) can be shown to be a special case of 3-D SAR image formation. In fact, traditional IFSAR processing results in the equivalent of merely a super-resolved, under-sampled, 3-D SAR image. However, when approached as a 3-D SAR problem, a number of IFSAR properties and anomalies are easily explained. For example, IFSAR decorrelation with height is merely ordinary migration in 3-D SAR. Consequently, treating IFSAR as a 3-D SAR problem allows insight and development of prope… more
Date: March 1, 2000
Creator: Doerry, Armin W. & Bickel, Doug L.
open access

3-dimensional beam scanning system for particle radiation therapy

Description: In radiation therapy treatment volumes up to several liters have to be irradiated. Today's charged particle programs use ridge filters, scattering foils, occluding rings collimators and boluses to shape the dose distribution. An alternative approach, scanning of a small diameter beam, is analyzed and tentative systems specifications are derived. Critical components are scheduled for fabrication and testing at LBL.
Date: March 1977
Creator: Leemann, C.; Alonso, J.; Grunder, H.; Hoyer, E.; Kalnins, G.; Rondeau, D. et al.
open access

A 3 TeV on 3 TeV proton-proton dedicated collider for Fermilab

Description: The Fermilab Dedicated Collider proposed in May 1983 is a 2 TeV on 2 TeV p)bar p) collider. The expected luminosity is )approximately) 10/sup 31/ cm/sup (minus/2)sec/sup )minus/1) and the estimated cost is )approximately) $362M (FY-83 dollars). Since 1983 both the superconducting magnet and the particle detector technologies have advanced and the countenance of physics, hence the desired characteristics of new facilities have also altered somewhat. We want to show here that with the new magnet … more
Date: March 30, 1988
Creator: Teng, L.C.
open access

4. pi. physics. [/sup 40/Ar + KCl, 0. 4 to 1. 8 GeV/A]

Description: Exclusive ..pi../sup -/ and charged-particle production in collisions of /sup 40/Ar on KCl are studied at incident energies from 0.4 to 1.8 GeV/A. The correlation between the ..pi../sup -/ and the total charged particle multiplicity confines the reaction along a narrow ridge with no exotic islands of pion production. For high multiplicities the system reaches the total disintegration of target and projectile into singly charged fragments and pions. Every 200 MeV/A datum was taken with a central… more
Date: March 1, 1980
Creator: Sandoval, A.
open access

The 5- by 7-meter wind tunnel of the DVL

Description: The report contains a description of the DVL wind tunnel. According to the cones fixed, an elliptical stream with axes 5 by 7 meters and length 9 meters, or a stream 6 by 8 meters in cross section and 11 meters in length is available. The top speed with the smaller cone is 65 meters per second. The testing equipment consists of an automatic six-component balance and a test rig for propellers and engines up to 650 horsepower.
Date: March 1936
Creator: Kramer, M.
open access

6 GeV synchrotron x-ray source: Conceptual design report. Supplement A - characteristics of the insertion devices for the 6 GeV synchrotron source

Description: Historically, synchrotron radiation (SR) has been obtained primarily from bending-magnet (BM) sources. These continuous sources of electromagnetic radiation have contributed in a major way to our understanding of the structure and dynamics of biological, chemical and material systems. During the past few years, newer sources of SR based on sophisticated periodic magnetic structures, called insertion devices (IDs), have been developed. The electromagnetic radiation from these IDs can be used as … more
Date: March 1, 1986
open access

6 GeV synchrotron x-ray source: Conceptual design report. Supplement B - conceptual design of proposed beam lines for the 6 GeV light source

Description: In this document, preliminary conceptual designs are presented for ten sample beamlines for the 6 GeV Light Source. These beamlines will accommodate investigations in solid-state physics, materials science, materials technology, chemical technology, and biological and medical sciences. In future, the designs will be altered to include new developments in x-ray optics and hardware technologies. The research areas addressed by the samples beamlines are as follows: Topography and Radiography/Tomog… more
Date: March 1, 1996
Back to Top of Screen