UNT Libraries Government Documents Department - 4,120 Matching Results

Search Results

Two-Dimensional Subsonic Compressible Flows Past Arbitrary Bodies by the Variational Method

Description: Instead of solving the nonlinear differential equation which governs the compressible flow, an approximate method of solution by means of the variational method is used. The general problem of steady irrotational flow past an arbitrary body is formulated. Two examples were carried out, namely, the flow past a circular cylinder and the flow past a thin curved surface. The variational method yields results of velocity and pressure distributions which compare excellently with those found by existing methods. These results indicate that the variational method will yield good approximate solution for flow past both thick and thin bodies at both high and low Mach numbers.
Date: March 1951
Creator: Wang, Chi-Teh

Considerations of the Total Drag of Supersonic Airfoil Sections

Description: The results of calculations of the viscous and pressure drags of some two-dimensional supersonic airfoils at zero lift are presented. The results indicate that inclusion of viscous drag alters many previous results regarding the desirability of certain airfoil shapes for securing low drags at supersonic speeds. At certain Reynolds and Mach numbers, for instance, a circular-arc airfoil may theoretically have less drag than the previously advocated symmetrical wedge-shape profile; although under different conditions, the circular-arc airfoil may have a higher drag.
Date: July 1947
Creator: Ivey, H. Reese & Klunker, E. Bernard

Tables for the Computation of Wave Drag of Arrow Wings of Arbitrary Airfoil Section

Description: Tables and computing instructions for the rapid evaluation of the wave drag of delta wings and of arrow wings having a ration of the tangent of the trailing-edge sweep angle to the tangent of the leading-edge sweep angle in the range from -1.0 to 0.8. The tables cover a range of both subsonic and supersonic leading edges.
Date: June 1954
Creator: Grant, Fredrick C. & Cooper, Morton

Two-Dimensional Irrotational Transonic Flows of a Compressible Fluid

Description: The methods of NACA TN No. 995 have been slightly modified and extended in include flows with circulation by considering the alteration of the singularities of the incompressible solution due to the presence of the hypergeometric functions in the analytic continuation of the solution. It was found that for finite Mach numbers the only case in which the nature of the singularity can remain unchanged is for a ratio of specific heats equal to -1. From a study of two particular flows it seems that the effect of geometry cannot be neglected, and the conventional "pressure-correction" formulas are not valid, even in the subsonic region if the body is thick, especially if there is a supersonic region in the flow.
Date: June 1948
Creator: Kuo, Yung-Huai

Acoustic analysis of ram-jet buzz

Description: From Introduction: "The surging of a system containing a centrifugal- or axial-flow compressor (e.g., refs. 1 to 4) is an example of self-sustained oscillation. Inlets designed for supersonic jet engines also have been observed to induce oscillations (e.g., refs. 5 to 11) which are usually referred to as "buzz." The origin of buzz in ram-jet engines is the subject of the present report."
Date: November 1955
Creator: Mirels, Harold

Adaptation of aeronautical engines to high altitude flying

Description: Report discussing Issues and techniques relative to the adaptation of aircraft engines to high altitude flight. Covered here are the limits of engine output, modifications and characteristics of high altitude engines, the influence of air density on the proportions of fuel mixtures, methods of varying the proportions of fuel mixtures, the automatic prevention of fuel waste, and the design and application of air pressure regulators to high altitude flying. Summary: 1. Limits of engine output. 2. High altitude engines. 3. Influence of air density on proportions of mixture. 4. Methods of varying proportions of mixture. 5. Automatic prevention of fuel waste. 6. Design and application of air pressure regulators to high altitude flying.
Date: May 1923
Creator: Kutzbach, K

Acoustic, thrust, and drag characteristics of several full-scale noise suppressors for turbojet engines

Description: From Introduction: " Considerable analytical and experimental research has been done to find means of reducing the noise levels of the turbojet transports. Noise levels can be decreased by engine redesign to reduce the jet-exit velocity (ref. 1), proper flight-climb techniques (ref. 2), and the use of noise-suppression exhaust nozzles (refs. 3 to 5). The present report is concerned with the last method."
Date: April 1958
Creator: Ciepluch, Carl C; North, Warren J; Coles, Willard D & Antl, Robert J

Acoustic radiation from two-dimensional rectangular cutouts in aerodynamic surfaces

Description: From Introduction: "The experiments in high-speed flow showed that an intense, high-frequency acoustic radiation is an essential feature of the problem. Consequently, a study of the acoustic field (involving schlieren observations and frequency and intensity measurements) was undertaken. This report presents the salient features of the study, which was mainly exploratory."
Date: August 1955
Creator: Krishnamurty, K

Adaptor for measuring principal strains with Tuckerman strain gage

Description: Report discussing an adapter which uses three Tuckerman optical strain gages to measure the displacement of the three vortices of an equilateral triangle along lines 120 degrees apart. These displacements are substituted in well-known equations in order to compute the magnitude and direction of the principal strains. Tests of the adaptor indicate that principal strains over a gage length of 1.42 inch may be measured with a systematic error not exceeding 4 percent and a mean observational error of the order of + or minus 0.000006. The maximum observed error in strain was of the order of 0.00006. The directions of principal strains for unidirectional stress were measured with the adaptor with an average error of the order of 1 degree.
Date: June 1943
Creator: Mcpherson, A E

The 1350 F stress-rupture properties of two wrought alloys and three cast alloys

Description: From Summary: "These properties compare favorably with those of the strongest similar alloys previously investigated. However, compared with a 60Cr-25Fe-15Mo alloy, the three cobalt-chronium-nickel cast alloys are inferior. A correlation of NACA and OSRD (Project NRC-8) data is presented, showing the variation of rupture strengths with temperature in the range of 1350^o to 2000^o for alloys."
Date: November 1947
Creator: Reynolds, E E; Freeman, J W & White, A E

N.A.C.A. control position recorder

Description: Report discussing a new instrument is described which is capable of simultaneously recording the position of the three controls of an airplane. The records are taken photographically on a standard N.A.C.A. film drum and the instrument can be quickly installed in any airplane.
Date: May 1922
Creator: Norton, F. H.

Calculation of aerodynamic forces on a propeller in pitch or yaw

Description: An analysis was made to determine the applicability of existing propeller theory and the theory of oscillating airfoils to the problem of determining the magnitude of the forces on propellers in pitch or yaw. Strip calculations using compressible airfoil characteristics were first made as though steady-state conditions existed successively at several blade positions of the propeller blades during one revolution. A theory of oscillating airfoils in pulsating incompressible potential flow was then considered from which it was possible to determine factors which would modify the steady-state forces.
Date: January 1, 1952
Creator: Crigler, John L & Gilman, Jean, Jr

Calculation and compilation of the unsteady-lift functions for a rigid wing subjected to sinusoidal gusts and to sinusoidal sinking oscillations

Description: The total lift responses to sinusoidal sinking oscillations and to sinusoidal gusts have been calculated, largely from existing information, for wings of various plan forms in subsonic and supersonic flow. For most of the cases considered, closed-form expressions are given and the final results are presented in the form of plots of the square of the modulus of the lift coefficient for wings in a sinusoidally oscillating gust field and in the form of the real and imaginary parts of the lift coefficient for wings undergoing sinusoidal sinking oscillations.
Date: October 1, 1956
Creator: Drischler, Joseph A