UNT Libraries Government Documents Department - 5,881 Matching Results

Search Results

open access

PILOT PLANT SHUTDOWN AND Pu-Al PROCESSING

Description: The large aqueous pilot plant facilities at ORNL were cleaned and are being put in standby condition. Experience was gained during the year as anion exchange was used to recover more than one kg of plutonium left in the exploded evaporator system. This experience is being applied to a new recovery program just beginning in cell 1 of Building 4507. (auth)
Date: September 25, 1961
Creator: Bresee, J.C.
open access

Configuration Management Program Plan

Description: Westinghouse Savannah River Company (WSRC) has established a configuration management (CM) plan to execute the SRS CM Policy and the requirements of the DOE Order 4700.1. The Reactor Restart Division (RRD) has developed its CM Plan under the SRS CM Program and is implementing it via the RRD CM Program Plan and the Integrated Action Plan. The purpose of the RRD CM program is to improve those processes which are essential to the safe and efficient operation of SRS production reactors. This docume… more
Date: September 25, 1991
open access

Theoretical study of the structure, energetics, and dynamics of silicon and carbon systems using tight-binding approaches

Description: Semiempirical interatomic potentials are developed for silicon and carbon by modeling the total energy of the system using tight-binding approaches. The parameters of the models were obtained by fitting to results from accurate first-principles Local Density Functional calculations. Applications to the computation of phonons as a function of volume for diamond-structured silicon and carbon and the thermal expansions for silicon and diamond yields results which agree well with experiment. The ph… more
Date: October 25, 1991
Creator: Xu, Chunhui.
open access

EXPERIMENTAL MEASUREMENTS OF THE SUCTION HEAD REQUIRED BY THE HALLAM PROTOTYPE FREE SURFACE SODIUM PUMP

Description: Hydraulic tests were made on the Hallam Prototype Free-Surface Sodium Pump to determine the net positive suction head (NPSH) required at various sodium flow rates. Pump performance data were also collected. The results indicate that an NPSH of 22 ft sodium is required at the design flow rate of 7200 gpm at approximates 1000 deg F, agreeing with computed values, and that the pump is designed with a safety margin of slightly over l0%. (D.L.C.)
Date: July 25, 1961
Creator: Atz, R.W.
open access

A cryogenic system design for the international thermonuclear experimental reactor (ITER)

Description: A conceptual design for ITER was completed last year. The author developed a suitable cryogenic system for ITER as part of this conceptual design effort. An overview of the design is reported. Emphasis is on the fact that cryogenics is a mature science, and a system supporting ITER needs can be made from time-proven components without loss of efficiency or reliability. Because of the large size of the ITER cryogenic system, large numbers of compressors and expanders must be used. Very high reli… more
Date: September 25, 1991
Creator: Slack, D.S.
open access

GRAPHITE-STAINLESS STEEL COMPATIBILITY STUDIES

Description: S>The compatibility of type 304L stainless steel in intimate contact with graphite is being studied as a function of temperature and contact pressure. This study is an outgrowth of materials compatibility problems in present and advanced gas-cooled reactors, where structural members in direct contact with graphite provide the possibility of both carburization and self-welding. Initial studies were concerned with surface reactions in the absence of gaseous contaminants under a vacuum of 10/sup -… more
Date: September 25, 1962
Creator: Fleischer, B.; DeVan, J. H. & Coobs, J. H.
open access

Pakistan: A Bibliography

Description: This report is a bibliography that cites information related to Pakistan. It includes General, History, Government and Politics, Economy and Development, Foreign policy, and defense.
Date: November 25, 1969
Creator: Patitucci, Jean B.
open access

Kilowatt Isotope Power System: component test report for the Ground Demonstration System Alternator Stator

Description: Results are presented of acceptance tests conducted on the Alternator Stator, S/N 002, for the Kilowatt Isotope Power System. These results show that the Alternator Stator, S/N 002 for the Kilowatt Isotope Power System has satisfactorily completed the testing set forth within Sundstrand Test Specification 2538. Test requirements of TS 2538 were extracted from the Kilowatt Isotope Power System, and Phase I Test Plan.
Date: April 25, 1978
Creator: Brainard, E.L.
open access

Advanced Gas Cooled Nuclear Reactor Materials Evaluation and Development Program. Progress report, January 1, 1980-March 31, 1980

Description: Results are presented of work performed on the Advanced Gas-Cooled Nuclear Reactor Materials Evaluation and Development Program. The objectives of this program are to evaluate candidate alloys for Very High Temperature Reactor (VHTR) Nuclear Process Heat (NPH) and Direct Cycle Helium Turbine (DCHT) applications, in terms of the effect of simulated reactor primary coolant (helium containing small amounts of various other gases), high temperatures, and long time exposures, on the mechanical prope… more
Date: June 25, 1980
open access

Monthly energy review, October 1991. [Contains glossary]

Description: This report presents current data on production, consumption, stocks, imports, exports, and prices of the principal energy commodities in the United States. Also included are data on international production of crude oil, consumption of petroleum products, petroleum stocks, and production of electricity from nuclear-powered facilities. 36 figs., 57 tabs.
Date: October 25, 1991
open access

Assessment of the potential of colloidal fuels in future energy usage. Final report. [97 references]

Description: Pulverized coal has been an increasing important source of energy over the past century. Most large utility boilers, all modern coking plants, and many industrial boilers and blast furnaces employ pulverized coal as a major feed stream. In periods of oil shortages, such as during World Wars I and II, the concept of adding powdered coal to oil for use in combustion equipment originally designed for oil has been actively pursued but rarely used. Over this same period of time, there have been atte… more
Date: February 25, 1980
open access

Preliminary design data package. Appendix C

Description: The design requirements, design philosophy, method and assumptions, and preliminary computer-aided design of the Near-Term Hybrid Vehicle including its electric and heat power units, control equipment, transmission system, body, and overall vehicle characteristics are presented. (LCL)
Date: July 25, 1979
open access

Method and apparatus for aerosol-particle absorption spectroscopy. [DOE patent application]

Description: A method and apparatus are described for determining the absorption spectra, and other properties, of aerosol particles. A heating beam source provides a beam of electromagnetic energy which is scanned through the region of the spectrum which is of interest. Particles exposed to the heating beam which have absorption bands within the band width of the heating beam absorb energy from the beam. The particles are also illuminated by light of a wave length such that the light is scattered by the pa… more
Date: June 25, 1981
Creator: Campillo, Anthony J. & Lin, Horn-Bond
open access

Fire protection countermeasures for containment ventilation systems

Description: The goal of this project is to find countermeasures to protect High Efficiency Particulate Air (HEPA) filters, in exit ventilation ducts, from the heat and smoke generated by fire. Initially, methods were developed to cool fire-heated air by fine water spray upstream of the filters. It was recognized that smoke aerosol exposure to HEPA filters could also cause disruption of the containment system. Through testing and analysis, several methods to partially mitigate the smoke exposure to the HEPA… more
Date: August 25, 1980
Creator: Alvares, N.; Beason, D.; Bergman, V.; Creighton, J.; Ford, H. & Lipska, A.
open access

Summary of HRT Run 25

Description: Run 25 was the final period of power operational of the HRT. The reactor was operated for periods of 62, 8, 52, and 80 hours at 5 Mw with no outward indication of fuel and core and blanket average temperatures of 270 and 230 deg C, respectively. The uranium concentration in the was 1.7 to 2.0 g U/kg D/sub 2/O. Longer periods of operation were prevented by mechanical difficulties, notably with the fuel feed pump. While the reactor was subcritical after the last of the above runs, the upper patch… more
Date: July 25, 1962
Creator: Engel, J. R.; Bauman, H. F.; Buchanan, J. R.; Haubenreich, P. N.; Piper, H. B. & Richardson, D. M.
open access

Development of a Fluidized Bed Calcination Process for Aluminum Nitrate Wastes in a Two-Foot-Square Plant Calciner. Part 2. Factors Affecting the Intra-Particle Porosity of Alumina

Description: A seven- to twenty-fold volume reduction can be obtained from fluidized bed calcination of aqueous aluminum nitrate wastes, depending on the operating conditions employed and their effect on the intra-panticle porosity and absolute density of the calcined alumina. Among the calcining variables, only the bed temperature and the fuel aluminum concentration had a significant effect on the intra-particle porosity of alumina generated during studies conducted primarily in a two-foot-square fluidized… more
Date: July 25, 1962
Creator: Wheeler, B. R.; Grimmett, E. S. & Buckham, J. A.
Back to Top of Screen