UNT Libraries Government Documents Department - 6,674 Matching Results

Search Results

Results: 1 - 24 next
open access

Single particle behavior in plasmas

Description: The paper follows the history of a neutral atom or molecule into a plasma--ionization, dissociation, radiation,--until it becomes a set of charged particles moving in the electromagnetic fields of the plasma system. The various useful forms of the method of averaging are displayed and applied to calculation of constants of motion. The breakdown of these constants is discussed along with some of the implications for fusion systems.
Date: March 10, 1977
Creator: McNamara, B.
Item Type: Refine your search to only Report
open access

Analysis of Paraho oil shale products and effluents: an example of the multi-technique approach

Description: Inorganic analysis of solid, liquid and gaseous samples from the Paraho Semiworks Retort was completed using a multitechnique approach. The data were statistically analyzed to determine both the precision of each method and to see how closely the various techniques compared. The data were also used to determine the redistribution of 31 trace and major elements in the various effluents, including the offgas for the Paraho Retort operating in the direct mode. The computed mass balances show that … more
Date: June 10, 1979
Creator: Fruchter, J. S.; Wilkerson, C. L.; Evans, J. C. & Sanders, R. W.
Item Type: Refine your search to only Article
open access

Supporting Analysis for Thermal Suitability of Fuel Elements for SM-1A Core I Loading

Description: A recommended SM-1A Core I loading chart was derived from available, metallurgically acceptable elements at the SM-1A and SM-1 sites. The derivation was based on local thermal and hydraulic considerations of minimum elementto- element coolant channel clearances. These clearances were determined from field inspection measurements of outer fuel plate spacing, as modified by analytical calculations of plate ripple growth during exposure to reactor operating thermal stresses. (auth)
Date: January 10, 1962
Creator: Brondel, J. O.
Item Type: Refine your search to only Report
open access

Extracted current densities from surface conversion sources of negative ions

Description: The condition for extracting a maximum negative ion current density is found when the product of the radius of the negative ion conversion electrode, the cross-section for negative and positive ion recombination, and the density of positive ions in the ion source equals one. The optimum output is obtained at the highest positive ion density and the smallest electrode radius.
Date: February 10, 1982
Creator: Fink, J.H.
Item Type: Refine your search to only Report
open access

SOME EXPERIENCES IN THE WELD FABRICATION OF REFRACTORY METALS

Description: Discussion is given on the welding fabrication of tungsten, molybdenum, niobium, and tantalum. Properties which make the four refractory metals important are tabulatcd along with titanium which is given for comparison. Extensive evaluation was conducted using the gas, tungsten arc welding process employing both manual and machine welding. Design data were obtained exclusively from machine welded sheet materials. Flash welding, resistance spot welding and brazing, electron beam welding, and high… more
Date: February 10, 1961
Creator: Thompson, E.G.
Item Type: Refine your search to only Report
open access

Phase I of the Near-Term Hybrid Vehicle Program. Final report

Description: Heat engine/electric hybrid vehicles offer the potential of greatly reduced petroleum consumption, compared to conventional vehicles, without the disadvantages of limited performance and operating range associated with pure electric vehicles. This report documents a hybrid vehicle design approach which is aimed at the development of the technology required to achieve this potential, in such a way that it is transferable to the auto industry in the near term. The development of this design appro… more
Date: September 10, 1979
Item Type: Refine your search to only Report
open access

HANFORD STUDIES FOR EGCR COMBUSTION CHARACTERISTICS. Summary Report

Description: The temperature, geometry, and flow conditions which exist in the EGCR were duplicated in a mock-up designated as the EGCR Burning Rig to establish the combustion conditions in the reactor. The conditions under which the EGCR Burning Rig will ignite were established and an analytical model was developed which predicts these conditions. Because the Burning Rig cannot exactly dupIicate the reactor situation the final prediction of the safety of the EGCR must rest on computer calculations employin… more
Date: October 10, 1961
Creator: de Halas, D.R.; Dahl, R.E. & Jackson, J.L.
Item Type: Refine your search to only Report
open access

Tar sand extraction by steam stimulation and steam drive: measurement of physical properties

Description: The measurement of the following thermophysical properties of Utah tar sands is in progress: thermal conductivity, specific heat relative permeability, and viscosity (of the recovered bitumen). During the report period (October 1, 1978 to November 1, 1979), experimental procedures have been developed and a basic data set has been measured. Additionally, standard core analysis has been performed for four drill sites in the Asphalt Ridge, Utah area.
Date: September 10, 1980
Creator: Linberg, W.R.
Item Type: Refine your search to only Report
open access

Delayed Failure Hydrogen Embrittlement of Zirconium. Summary Report, September 15, 1961 to September 14, 1962

Description: The extent to which zirconium and zirconium alloys exhibit delayed failure (static fatigue) as caused by a combination of absorbed hydrogen and applied stress was investigated. Susceptibility to time-dependent fracture was evaluated for unalloyed zirconium and Zircaloy-2 with 200 and 500 ppm hydrogen as well as for an experimental Zr Al-Sn-Mo alloy and the Canadian Zr-2.5Nb cladding material. For unalloyed zirconium and Zircaloy-2 containing up to 500 ppm hydrogen, no room-temperature, timedepe… more
Date: October 10, 1962
Creator: Weinstein, D. & Holtz, F. C.
Item Type: Refine your search to only Report
open access

REACTIVITY CALIBRATIONS AND FISSION-RATE DISTRIBUTIONS IN AN UNMODERATED, UNREFLECTED URANIUM-MOLYBDENUM ALLOY RESEARCH PROGRAM

Description: Completion of zero-power critical experiments with the ORNL Health Physics Research Reactor is reported. A description is given concerning these experiments which were used to determine the critical size, fission-rate distributions, reactivity calibrations of its movable parts, the temperature coefficient of reactivity, and the reactivity effects of the presence of neutron- reflecting materials adjacent to the reactor. (J.R.D.)
Date: May 10, 1962
Creator: Mihalczo, J.T.
Item Type: Refine your search to only Report
open access

Petroleum marketing monthly, October 1991. [Contains glossary]

Description: This report is designed to give information and statistical data about a variety of crude oils and refined petroleum products. The publication provides statistics on crude oil costs and refined petroleum products sales for use by industry, government, private sector analysts, educational institutions, and consumers. Data on crude oil include the domestic first purchase price, the f.o.b. and landed cost of imported crude oil, and the refiner's acquisition cost of crude oil. Sales data for motor … more
Date: October 10, 1991
Item Type: Refine your search to only Report
open access

Kilowatt Isotope Power System: component test report for the ground demonstration system accumulator. 77-KIPS-100

Description: The purpose of this test was to demonstrate that the system accumulator for the developmental program to be conducted on the Kilowatt Isotope Power System (KIPS) fulfilled the requirements of the test procedure (TP 400) test objectives. The results of the expulsion testing performed on the system accumulator are presented.
Date: October 10, 1977
Creator: Brainard, E.L.
Item Type: Refine your search to only Report
open access

LOADING AND ELUTION CHARACTERISTICS OF SOME NATURAL AND SYNTHETIC ZEOLITES

Description: The cation exchange characteristics of several commercially available zeolites were evaluated, Equilibrium loading characteristics and exchange capacities were determined experimentally in the binary systems cesium-lithium, cesium-- sodium, cesium--potassium, cesium-Tubidium, cesium -- hydrogen, cesium-- ammonium, strontium-- magnesium, strontium-- calcium, strontium-- barium, and strontium-- hydrogen for several zeolites. Exchangeable cation fractions in the equilibrium solutions were varied f… more
Date: August 10, 1962
Creator: Ames, L.L. Jr. & Knoll, K.C.
Item Type: Refine your search to only Report
open access

RLPORINC: the RELAP4/MOD5 interface to ORINC

Description: The Oak Ridge Inverse code, ORINC, calculates the temperature distribution in an electric core pin from internal temperatures and the conditions in the surrounding environment. While the internal temperatures can be obtained from thermocouples in the Thermal Hydraulic Test Facility, the needed environmental conditions cannot be determined as directly from experimental data. However, this information can be determined from a modified version of the Reactor Linearized Analysis Program, RELAP. In … more
Date: January 10, 1978
Creator: Cliff, S.B.
Item Type: Refine your search to only Report
open access

System for producing a uniform rubble bed for in-situ processes

Description: A method and a cutter are disclosed for producing a large cavity filled with a uniform bed of rubblized oil shale or other material, for in-situ processing. A raise drill head has a hollow body with a generally circular base and sloping upper surface. A hollow shaft extends from the hollow body. Cutter teeth are mounted on the upper surface of the body and relatively small holes are formed in the body between the cutter teeth. Relatively large peripheral flutes around the body allow material to… more
Date: April 10, 1981
Creator: Galloway, Terry R.
Item Type: Refine your search to only Patent
open access

Upgrade of the Proton West secondary beamline

Description: As originally designed and operated, protons entering PW6 were steered by a series of EPB dipoles into a single interaction length beryllium target, some 43 feet from the enclosure wall. Ensuing secondary beams, either p{sup +}/{pi}{sup +} or p{sup -}/{pi}{sup -}, were collected by a string of quadrupoles following the target, steered westward, away from the Proton Center line, through PW6 and PW7, and ultimately focussed on experiment production targets located within the large PW8 hall. Aroun… more
Date: October 10, 1989
Creator: Spiegel, L.
Item Type: Refine your search to only Report
open access

Analytical model for the dynamic resistivity of electrically-exploded conductors

Description: A detailed model for the dynamic resistivity of an exploding conductor presents many difficulties. An electrically-exploded conductor undergoes significant hydrodynamic expansion as it is heated. Resistivity is a function of both the temperature and density of a conductor and realistic models for resistivity over the range of parameter space experienced by an exploding conductor are quite complex. See for example, the model of Lee and More (1984). Calculation of the hydrodynamic expansion of th… more
Date: October 10, 1986
Creator: Lee, R. S.
Item Type: Refine your search to only Article
Back to Top of Screen