UNT Libraries Government Documents Department - 25,111 Matching Results

Search Results

open access

Note on the cryostatic stability of superconducting composites

Description: A careful discussion is given of the ''equal area condition'' developed by Maddock et al. In order to make the essential points as clear as possible, analytical solutions are derived under simplifying assumptions (simple model for heat transfer by nucleate and film boiling liquid helium; constant heat conduction and specific heat) instead of using more realistic but less controllable computer calculations. A quantitative definition of the concept of a long wire is given. Num… more
Date: February 1, 1978
Creator: Gauster, W. F.
open access

WELDING AND BRAZING OF HIGH-TEMPERATURE RADIATORS AND HEAT EXCHANGERS

Description: Procedures were developed for fabricating highperformance radiators and heat exchangers for the Aircraft Nuclear Propulsion (ANP) Program. These components, which contain multitudes of tube-to-tube sheet and tube-to-fin joints, are similar in design to those under consideration for a variety of space vehicle applications. In order to ensure reliability of the tube-to-tube sheet joints, techniques producing welds of extremely high quality were used and back brazing of the welds with a suitable a… more
Date: February 20, 1962
Creator: Slaughter, G.M. & Patriarca, P.
open access

Strontium-90 Fueled Thermoelectric Generator Power Source for Five-Watt U.S. Coast Guard Light Buoy. Final Report

Description: The objectives of the SNAP 7A program were to design, manufacture, test, and deliver a five-watt electric generation system for a U. S. Coast Guard 8 x 26E light buoy. The 10-watt Sr/sup 90/ thermoelectric generator, the d-c-to-d-c converter, batteries and the method of installation in the light buoy are describcd. The SNAP 7A generator was fueled with four capsules containing a total of 40,800 curies of Sr/sup 90/ titanate. After fueling and testing, the SNAP 7A electric generating system was … more
Date: February 1, 1962
open access

Pacific Northwest Laboratory, annual report for 1983 to the DOE Office of Energy Research. Part 4. Physical sciences

Description: Part 4 of the Pacific Northwest Laboratory Annual Report for 1983 to the Office of Energy Research, includes those programs funded under the title Physical and Technological Research. The Field Task Program Studies reports in this document are grouped under the subheadings and each section is introduced by a divider page that indicates the Field Task Agreement reported in that section. These reports only briefly indicate progress made during 1983. The reader should contact the principal investi… more
Date: February 1, 1984
open access

GAS-COOLED REACTOR PROGRAM QUARTERLY PROGRESS REPORT FOR PERIOD ENDING SEPTEMBER 30, 1961

Description: Progress is reported on investigations in support of the Experimental Gas-Cooled Reactor, the Pebble-Bed Reactor Experiment, Advanced reactor design and development, test facilities, components, and materials. Topics covered include EGCR physics, EGCR performance analyses, structural investigations, EGCR component and materials development and testing, EGCR experimental facilities, PBRE physics and design studies, fueled-graphite investigations, clad fuel development, design studies of advanced… more
Date: February 1, 1962
open access

Examination of Uranium-2 w/o Zirconium Experimental Fuel Slugs Irradiated in EBR-I. Final Report-Program 6.1.11

Description: Six groups of U-2 wt% Zr fuel slugs were irradiated in the first core of the EBR-I to burnups of 0.080 to 0.189 at.% at calculated temperatures of 307 to 353 deg C. Two groups of cast specimens were found to be more dimensionally stable than four groups of wrought slugs. Of the wrought slungs, the as quenched group showed less tendency to grow than the three groups which had some annealing after quenching. Specimens at burnups of about 0.189 at.% and at 383 deg C showed the onset of swelling as… more
Date: February 1, 1962
Creator: Murphy, W. F.; Klank, A. C. & Paine, S. H.
open access

HRT CORROSION SAMPLES--ADDITIONAL DATA ON SPECIMENS REMOVED PRIOR TO RUN NO. 20

Description: Results of the examinations of corrosion specimens exposed in the HRT are presented. Specimens examined include core screen samples, core specimen array No. 1, blanket specimen array No. 2, core solution line specimen arrays No. 103 and 103A, and blanket solution line specimen array No. 203. These data include corrosion rates, computed from specimen weight-changes, and results of chemical analyses of scales removed from the specimens or specimen holders. A summary is included of the HRT operati… more
Date: February 1, 1961
Creator: Baker, J.E.; Silverman, M.D.; Jenks, G.H. & Olsen, A.R.
open access

Startup and Initial Testing of SM-1 Core II With Special Components

Description: The loading operation for SM-1 Core II is described. Results of startup physics measurements (Test A-300 (Series) and fission product iodine monitoring in the primary coolant are given. The SM-1 Core II initial loading progressed satisfactorily, fulfilling the predictions of the zero power experiment performed at the Alco Criticality Facility. The initial cold clean five rod bank position was 6.53 in.; the initial hot, no xenon, five rod bank position was 9.62 in.; the initial hot, equilibrium … more
Date: February 28, 1962
Creator: Moote, F. G. & Schrader, E. W.
open access

NRC plan for cleanup operations at Three Mile Island Unit 2

Description: This NRC Plan, which defines NRC's functional role in cleanup operations at Three Mile Island Unit 2 and outlines NRC's regulatory responsibilities in fulfilling this role, is the first revision to the initial plan issued in July 1980 (NUREG-0698). Since 1980, a number of policy developments have occurred which will have an impact on the course of cleanup operations. This revision reflects these developments in the area of NRC's review and approval process with regard to cleanup … more
Date: February 1, 1982
Creator: Lo, R. & Snyder, B.
open access

First wall/blanket/shield design and optimization system

Description: First wall/blanket/shield design and optimization system (BSDOS) has been developed to provide a state-of-the-art design tool for fast accurate analysis. In addition, it has been designed to perform several other functions: (1) allowing comparison and evaluation studies for different concepts using the same data bases and ground rules, (2) permitting the use of any figure of merit in the evaluation studies, (3) optimizing the first wall/blanket/shield design parameters for any figure of merit u… more
Date: February 1, 1988
Creator: Gohar, Y.; Baker, C.; Attaya, H.; Cha, Y.; Majumdar, S. & Scandora, T.
open access

Safety rod latch inspection

Description: During an attempt to raise control rods from the 100 K reactor in December, one rod could not be withdrawn. Subsequent investigation revealed that a small button'' in the latch mechanism had broken off of the lock plunger'' and was wedged in a position that prevented rod withdrawal. Concern that this failure may have resulted from corrosion or some other metallurgical problem resulted in a request that SRL examine six typical latch mechanisms from the 100 L reactor by use of radiography and met… more
Date: February 1, 1992
Creator: Leader, D.R.
open access

STAINLESS STEEL WASTES. III. LABORATORY STUDIES OF THE RATE OF REMOVAL OF STAINLESS STEEL IONS BY MERCURY CATHODE ELECTROLYSIS

Description: ABS> The removal rates of iron, nickel, and chromium from synthetic stainless steel waste solutions during electrolysis over a mercury cathode were studied. The loading capacity of the mercury for the stainless steel metals was estimated on the basis of laboratory experiments to be about two% by weight. The laboratory data indicated that, at an electrode potential of --1.80 voits vs S.C.E., 85 ampere-hours per liter of waste removed essentially all of the stainless steel ions from a sulfuric ac… more
Date: February 12, 1962
Creator: Anderson, D. R. & Rhodes, D. W.
open access

DOE role in nuclear policies and programs: official transcript of public briefing. Addendum December 13, 1977, Washington, D. C

Description: A total of 24 questions were read into the official record at the public briefing on nuclear policies and programs. The answers published were researched and written by personnel of DOE's Office of Energy Research, Office of Energy Technology, and the Secretary's Office. A few questions were sent to the Nuclear Regulatory Commission for review and for preparation of answers.
Date: February 1, 1978
open access

Boundary element formulation for planar time-dependent inelastic deformation of plates with cutouts

Description: A boundary element formulation for planar, time-dependent, inelastic deformation problems for bodies with cutouts is presented in this paper. A stress function description for these nonlinear problems leads to a nonhomogeneous biharmonic equation for the stress function rate. An integral representation of the solution uses modified kernels which guarantee that the cutout boundary is traction free for all time. This incorporation of the effect of the cutout on the stress field into the kernels l… more
Date: February 1, 1980
Creator: Mukherjee, S. & Morjaria, M.
open access

Extracted current densities from surface conversion sources of negative ions

Description: The condition for extracting a maximum negative ion current density is found when the product of the radius of the negative ion conversion electrode, the cross-section for negative and positive ion recombination, and the density of positive ions in the ion source equals one. The optimum output is obtained at the highest positive ion density and the smallest electrode radius.
Date: February 10, 1982
Creator: Fink, J.H.
open access

SCORE-EVET: a computer code for the multidimensional transient thermal-hydraulic analysis of nuclear fuel rod arrays. [BWR; PWR]

Description: The SCORE-EVET code was developed to study multidimensional transient fluid flow in nuclear reactor fuel rod arrays. The conservation equations used were derived by volume averaging the transient compressible three-dimensional local continuum equations in Cartesian coordinates. No assumptions associated with subchannel flow have been incorporated into the derivation of the conservation equations. In addition to the three-dimensional fluid flow equations, the SCORE-EVET code ocntains: (a) a one-… more
Date: February 1, 1978
Creator: Benedetti, R. L.; Lords, L. V. & Kiser, D. M.
open access

Geostatistics project of the National Uranium Resource Evaluation program

Description: Additional work has been done to display radiometric data from the Lubbock quadrangle in pseudocolor maps. A digitized topographic map of the quadrangle was obtained from the U.S. Geological Survey and this is being incorporated into the study of the radiometric data. Single-record data from the Lake Mead calibration range and from the Slayton test line have been obtained from GeoMETRICS: Inc. and analysis of this data has begun. Principal component analyses have been used to investigate the re… more
Date: February 1, 1978
Creator: Bement, T.R.; McKay, M.D. & Wecksung, G.W.
open access

Energy Program annual report

Description: The national economy is particularly dependent on efficient electrical generation and transportation. Electrical demand continues to grow and will increasingly rely on coal and nuclear fuels. The nuclear power industry still has not found a solution to the problem of disposing of the waste produced by nuclear reactors. Although coal is in ample supply and the infrastructure is in place for its utilization, environmental problems and improved conversion processes remain technical challenges. In … more
Date: February 1, 1988
Creator: Borg, I.Y. (ed.)
open access

LITERATURE SEARCH ON LEAD-BISMUTH ALLOYS

Description: BS>The use of a lead-bismuth alloy as a coolant in the removal of heat from power-generating nuclear reactors was considered with the possibility that its ternary alloy with uranium or plutonium might be of use in a reactor of the circulating-liquid-fuel type. Information collected from the literature covering phase-equilibrium studies, physicalproperty data, and reactivity of this alloy toward other substances is presented. (auth)
Date: February 14, 1950
Creator: Lee, M.E.
open access

Modeling studies on the precipitation of Kr after implantation into metals

Description: A rate-theory approach is applied to interpreting observations on the precipitation of Kr injected into Ni at temperatures between 25 and 560/degree/C. At temperatures of 400/degree/C or higher, the implanted Kr precipitates evolve into a bi-modal size distribution containing small solid precipitates and an additional population of larger, faceted bubbles. The calculations explore the dependence of the observed bi-modal distribution on the maximum size of the solid Kr precipitates and the effec… more
Date: February 1, 1988
Creator: Rest, J.
open access

EPICS System: An Overview

Description: This paper presents an overview of the EPICS control system at FERMILAB. EPICS is a distributed, multi-user, interactive system for the control and monitoring of particle beamlines at a high-energy experimental physics laboratory. The overview discusses the operating environment of the control system, the requirements which determined the design decisions, the hardware and software configurations, and plans for the future growth and enhancement of the present system. This paper is the first of … more
Date: February 1, 1984
Creator: Bartlett, J. F.; Bobbitt, J. S.; Kramper, B. J.; Lahey, T. E.; MacKinnon, B. A. & West, R. E.
open access

Resonant decay of finite extent cold electron plasma waves

Description: The parametric decay of a finite extent cold electron plasma wave (slow wave) was studied experimentally. Using a frequency of ..omega../sub 0/ approximately greater than 10..omega../sub pi/, it was found that the decay waves propagated along the pump wave rather than in the Vector E/sub 0/ x Vector B direction. This is in agreement with the recent theoretical predictions of finite length stabilization.
Date: February 1, 1978
Creator: Wong, K. L.; Bellan, P. & Porkolab, M.
open access

Structural materials for breeder reactor cores and coolant circuits

Description: The structural components of principal interest in LMFBR cores and cooling circuits include the reactor vessel, primary and secondary piping, intermediate heat exchanger (IHX), and steam generator. Load-bearing components inside the vessel, among these the fuel cladding and duct, are also included. The operating conditions present in a fast-breeder nuclear reactor impose a number of requirements on the mechanical, physical, and neutronic properties of the materials used to construct these compo… more
Date: February 1, 1984
Creator: Diercks, D. R.
Back to Top of Screen