UNT Libraries Government Documents Department - 71 Matching Results

Search Results

1998 Complex Systems Summer School

Description: For the past eleven years a group of institutes, centers, and universities throughout the country have sponsored a summer school in Santa Fe, New Mexico as part of an interdisciplinary effort to promote the understanding of complex systems. The goal of these summer schools is to provide graduate students, postdoctoral fellows and active research scientists with an introduction to the study of complex behavior in mathematical, physical, and living systems. The Center for Nonlinear Studies supported the eleventh in this series of highly successful schools in Santa Fe in June, 1998.
Date: December 15, 1998

Creating metallic under-dense radiators by electron beam heating prior to laser impact

Description: A pulsed, relativistic electron beam can heat a metal foil to a plasma state, and initiate an expanding flow into vacuum. At a given time in its evolution, this flow fills a nearly spherical volume with nearly uniform density, assuming a rapid expansion prior to any condensation. A metal cloud produced in this way can serve as a target of intense laser illumination to create an under-dense radiator of x-rays. The phrase ''under-dense radiator'' means that the cloud, assumed ionized, has a plasma density that is less than the critical density for the wavelength of the laser light. The example described here is of a 2 {micro}g copper foil 23 {micro}m thick and 0.16 mm in diameter, heated by 8 mJ of electron beam energy in as short a time as possible, perhaps under 50 ns. The electron beam pulse must be at least 140 nC at 100 keV in order to transit the foil and deposit 8 mJ. A 50 ns pulse focused on the target would have a current of 2.8 A, and a current density of 14 kA/cm{sup 2}. The initial plasma temperature is 0.5 eV. After 300 ns, the flow has expanded to fill a nearly spherical volume of 1 mm diameter, with a nearly uniform copper density of 1.5 x 10{sup 20} cm{sup {minus}3}. The leading edge of the cloud is expanding at 1700 m/s, while flow at the original position of the foil surface expands at 150 m/s. This cloud is nearly stationary during the short time of a laser pulse at the National Ignition Facility (NIF).
Date: December 15, 1998
Creator: Garcia, M

Current Status of Health and Safety Issues of Sodium/Metal Chloride (Zebra) Batteries

Description: This report addresses environmental, health, and safety (EH&S) issues associated with sodium/ metal chloride batteries, in general, although most references to specific cell or battery types refer to units developed or being developed under the Zebra trademark. The report focuses on issues pertinent to sodium/metal chloride batteries and their constituent components; however, the fact that some ''issues'' arise from interaction between electric vehicle (EV) and battery design compels occasional discussion amid the context of EV vehicle design and operation. This approach has been chosen to provide a reasonably comprehensive account of the topic from a cell technology perspective and an applications perspective.
Date: December 15, 1998
Creator: Trickett, D.

Market-Driven EFG Modules, Annual Subcontract Report, 14 December 1996 - 13 February 1998

Description: This report summarizes the progress made at ASE Americas Inc. during Phase II of this subcontract. Accomplishments under Task 4: Wafers include optimization of edge-defined film-fed growth (EFG) crystal growth variables, leading to reduced crystal stresses and improved wafer flatness; increased die run length due to improvements in the design of furnace components; construction and testing of EFG growth furnace enclosure; reduction of EFG wafer thickness from 300 {micro}m for 50% of all standard production material; implementation of new equipment to reduce costs of silicon feedstock sorting prior to EFG crystal growth with a 3% increase in silicon feedstock utilization; and development work demonstrating the laser cutting of EFG wafers at higher speeds and with reduced silicon damage. Accomplishments under Task 5: Cells include characterization of cells after diffusion as preliminary work toward improving diffusion conditions and improving cell efficiency; demonstration of a continuous process to remove phosphorus glass from diffused wafers, reducing chemical consumption and hazardous waste by 98%; development of statistical process control methods to improve cell production process control; the use of design of experiments to study interactions between processing at various steps in cell manufacturing, and to develop strategies for productivity improvements; improvements in EFG cell efficiency due to the reduction in average wafer thickness; design and construction of equipment for producing cells with an improved grid design; and demonstration of average efficiencies over 14.1% on production lots of EFG cells. Accomplishments under Task 6: Modules include production and successful testing of prototypes of a lower-cost module diode housing; successful demonstration of a module design that greatly improves collection of light from space between cells in modules; testing of new encapsulants and lamination processes to demonstrate reduced lamination time, improved yield and enhanced durability; and completion of options study for lower-cost module frames, and development of ...
Date: December 15, 1998
Creator: Kardauskas, M. & Kalejs, J. (ASE Americas, Inc., Billerica, Massachusetts)

Principal facts for new gravity stations in the Pahute Mesa and Oasis Valley areas, Nye County, Nevada

Description: Regional gravity and aeromagnetic maps of the Pahute Mesa and Oasis Valley region indicate the presence of several structures that may influence the flow of groundwater. For example, several prominent linear features expressed by both gravity and aeromagentic data could act either as barriers or conduits for groundwater. The current gravity study was undertaken to better define the boundaries of the interpreted major regional structures in the area.
Date: December 15, 1998
Creator: Davidson, J.G.; Hildenbrand, T.G.; Mankinen, E.A. & Roberts, C.W.

[Support of theoretical high energy physics research at the Supercomputer Computations Research Institute]. Final report, September 30, 1992--July 31, 1997

Description: The research primarily involved lattice field theory simulations such as Quantum Chromodynamics (QCD) and the Standard Model of electroweak interactions. Among the works completed by the members of the lattice group and their outside collaborators in QCD simulations are extensive hadronic spectrum computations with both Wilson and staggered fermions, and calculations of hadronic matrix elements and wavefunctions. Studies of the QCD {beta} function with two flavors of Wilson fermions, and the study of a possible flavor-parity breaking phase in QCD with two flavors of Wilson fermions have been completed. Studies of the finite temperature behavior of QCD have also been a major activity within the group. Studies of non-relativistic QCD, both for heavy-heavy mesons and for the heavy quark in heavy-light mesons have been done. Combining large N analytic computations within the Higgs sector of the standard model and numerical simulations at N = 4 have yielded a computation of the upper bound of the mass of the Higgs particle, as well as the energy scale above which deviations from the Standard Model may be expected. A major research topic during the second half of the grant period was the study of improved lattice actions, designed to diminish finite lattice spacing effects and thus accelerate the approach to the continuum limit. A new exact Local Hybrid Monte Carlo (overrelaxation) algorithm with a tunable overrelaxation parameter has been developed for pure gauge theories. The characteristics of this algorithm have been investigated. A study of possible instabilities in the global HMC algorithm has been completed.
Date: December 15, 1998
Creator: Bitar, K.M.; Edwards, R.G.; Heller, U.M. & Kennedy, A.D.

Naturally fractured tight gas reservoir detection optimization

Description: The three tasks were completed during this reporting period. During this quarter, work focused on a local structural analysis of the Table Rock field, greater Green River basin (GGRB) in southwestern Wyoming. The ultimate objective of the local analysis is to apply the techniques developed and demonstrated during earlier phases of the project in the Rulison Field area of the Piceance basin for sweet-spot delineation. The primary goal of this work is to focus in on the Table Rock field area in the northern Washakie basin of the Greater Green River basin in support of Union Pacific Resources and DOE planned horizontal drilling efforts. The work plan for the quarter of April 1, 1998--June 30, 1998 consisted of three tasks: (1) Acquire necessary seismic data and depth-convert, (2) Map major fault geometry and analyze displacement vectors, (3) Develop and initiate a natural fracture prediction study.
Date: November 15, 1998

Riverton Dome Gas Exploration and Stimulation Technology Demonstration, Wind River Basin, Wyoming

Description: This project will provide a full demonstration of an entirely new package of exploration technologies that will result in the discovery and development of significant new gas reserves now trapped in unconventional low-permeability reservoirs. This demonstration includes the field application of these technologies, prospect definition and well siting, and a test of this new strategy through wildcat drilling. In addition this project includes a demonstration of a new stimulation technology that will improve completion success in these unconventional low permeability reservoirs which are sensitive to drilling and completion damage. The work includes two test wells to be drilled by Snyder Oil Company on the Shoshone/Arapahoe Tribal Lands in the Wind River Basin. This basin is a foreland basin whose petroleum systems include Paleozoic and Cretaceous source beds and reservoirs which were buried, folded by Laramide compressional folding, and subsequently uplifted asymmetrically. The anomalous pressure boundary is also asymmetric, following differential uplift trends. The Institute for Energy Research has taken a unique approach to building a new exploration strategy for low-permeability gas accumulations in basins characterized by anomalously pressured, compartmentalized gas accumulations. Key to this approach is the determination and three-dimensional evaluation of the pressure boundary between normal and anomalous pressure regimes, and the detection and delineation of areas of enhanced storage capacity and deliverability below this boundary. This new exploration strategy will be demonstrated in the Riverton Dome´┐Ż Emigrant Demonstration Project (RDEDP) by completing the following tasks: 1) detect and delineate the anomalous pressure boundaries, 2) delineate surface lineaments, fracture and fault distribution, spacing, and orientation through remote sensing investigations, 3) characterize the internal structure of the anomalous pressured volume in the RDEDP and determine the scale of compartmentalization using produced water chemistry, 4) define the prospects and well locations as a result on this new exploration technology, and 5) ...
Date: November 15, 1998
Creator: Surdam, Ronald C.

Biological Monitoring Program for East Fork Poplar Creek

Description: In May 1985, a National Pollutant Discharge Elimination System (NPDES) permit was issued for the Oak Ridge Y-12 Plant. As a condition of the permit, a Biologicai Monitoring and Abatement Program (BMAP) was developed to demonstrate that the effluent limitations established for the Y-12 Plant protect the classified uses of the receiving stream (East Fork Poplar Creek; EFPC), in particular, the growth and propagation of aquatic life (Lear et al. 1989). A second objective of the BMAP is to document the ecological effects resulting from the implementation of a water pollution control program designed to eliminate direct discharges of wastewaters to EFPC and to minimize the inadvertent release of pollutants to the environment. Because of the compiex nature of the discharges to EFPC and the temporal and spatial variability in the composition of the discharges, a comprehensive, integrated approach to biological monitoring was developed. A new permit was issued to the Y-12 Plant on April 28, 1995 and became effective on July 1, 1995. Biological monitoring continues to be required under the new permit. The BMAP consists of four major tasks that reflect different but complementary approaches to evaluating the effects of the Y-12 Plant discharges on the aquatic integrity of EFPC, These tasks are (1) toxicity monitoring, (2) biological indicator studies, (3) bioaccumuiation studies, and (4) ecological surveys of the periphyton, benthic macro invertebrate, and fish communities. Monitoring is currently being conducted at five sites, although sites maybe excluded and/or others added depending upon the specific objectives of the various tasks. Criteria used in selecting the sites include: (1) location of sampling sites used in other studies, (2) known or suspected sources of downstream impacts, (3) proximity to U.S. Department of Energy (DOE) Oak Ridge Reservation (ORR) boundaries, (4) concentration of mercury in the adjacent floodplain, (5) appropriate habitat ...
Date: October 15, 1998
Creator: Adams, S.M.; Christensen, S.W.; Greeley, M.S.jr; Hill, W.R.; Kszos, L.A.; McCarthy, J.F. et al.

Corrective Action Investigation Plan for Corrective Action Unit 486: Double Tracks RADSAFE Area Nellis Air Force Range, Nevada

Description: This Corrective Action Investigation Plan (CAIP) has been developed in accordance with the Federal Facility Agreement and Consent Order (FFACO) that was agreed to by the US Department of Energy, Nevada Operations Office (DOE/NV); the State of Nevada Division of Environmental Protection (NDEP); and the US Department of Defense (FFACO, 1996). The CAIP is a document that provides or references all of the specific information for investigation activities associated with Corrective Action Units (CAUs) or Corrective Action Sites (CASs). According to the FFACO, CASs are sites potentially requiring corrective action(s) and may include solid waste management units or individual disposal or release sites (FFACO, 1996). Corrective Action Units consist of one or more CASs grouped together based on geography, technical similarity, or agency responsibility for the purpose of determining corrective actions. This CAIP contains the environmental sample collection objectives and the criteria for conducting site investigation activities at CAU 486, the Double Tracks Radiological Safety (RADSAFE) Area (DTRSA) which is located on the Nellis Air Force Range 71North (N), west of the Tonopah Test Range (TTR). The TTR, included in the Nellis Air Force Range Complex, is approximately 255 kilometers (km) (140 miles [mi]) northwest of Las Vegas, Nevada (Figure 1-1). Corrective Action Unit 486 is comprised of CAS 71-23-001-71DT consisting of two areas of concern referred to as the vehicle decontamination area and the animal burial pit. The DTRSA is located on the west side of the Cactus Range approximately 8 km (5 mi) southwest of the Cactus Spring gate at the intersection of the Cactus Spring Road and the Double Tracks Control Point Road (Figure 1-2). The DTRSA was used during May 1963 to decontaminate vehicles, equipment, personnel, and animals from the Double Tracks test. The DTRSA is one of three areas identified as a potential location for ...
Date: October 15, 1998
Creator: Vegas, IT Las

Electronic refrigerant leak detector. Quarterly technical progress report

Description: The project comprises three main tasks. They are (1) Develop, design, and fabricate sensors, (2) Develop, design, and fabricate test instruments, (3) Testing and data analysis. The milestone includes 17 sub-tasks for the 52-weeks project period, starting on May 1, 1998 and ending on April 30, 1999. As stated in the Application for Federal Assistance, Micronic intended to relocate to a new office by June of 1998. This decision was delayed, since the first partial payment was transferred on August 12, 1998. Micronic plans to relocate this November. A second Provisional Application for a US patent has been filed. Progress made during this period is reported.
Date: October 15, 1998
Creator: Talamas, E. Jr.

Fly ash-enhanced aluminum composites for automotive parts. [Reports for April to June, 1998, and July to September, 1998]

Description: The objectives of this report are to produce and evaluate the use of aluminum ''ashalloys''--metal matrix composites that incorporate coal fly ash--in the commercial manufacture of cast automotive parts. Some highlights are: (1) Ashalloy ingot with ''C'' type fly ash was synthesized using stir casting techniques similar to the successful castings of ''F'' type fly ash. Agglomeration was noted. Stirring periods were increased up to 45 minutes compared to the normal 5 minutes to determine whether the shear force of stirring would disagglomerate the clusters noted with this type of fly ash. The resulting sample showed clustering. (2) The ashalloy ingots of ''C'' type fly ash were remelted and poured into permanent molds using a cloth filter to screen out clusters. There was no major reduction in clusters of fly ash particles in the composite since the filter with the mesh size larger than 1 x 1 mm was used. The composite melt would not flow through when filters with smaller openings were used. (3) The fly ash sample from Wisconsin Electric Power Company was sent for classification. (4) A 1 lb. sample of JTM-processed fly ash was sent to Wisconsin Electric Power Company for classification and 10 lb. of same fly ash was sent to The Jet Pulverizer Company for jet milling. (5) Experiments on fly ash pretreatment as well as synthesis of ash alloy are continuing. (6) Attempts are being made to apply high speed shear mixing with selected liquids to disperse the clusters noted in ashalloy with the ''C'' type fly ash base. Stir casting processes have been developed to incorporate type ''F'' fly ash of different sizes and measuring tensile data on cast bars. This data enables selection of the optimum size of fly ash to meet specific property requirements. Attempts are underway to develop stir ...
Date: October 15, 1998
Creator: Golden, Dean & Rohatgi, Pradeep

Hanford tank initiative cone penetrometer stand alone grouting module

Description: The HTI subsurface characterization task will use the Hanford Cone Penetrometer platform (CPP) to deploy contaminant sensor and soil sampling probes into the vadose zone surrounding SST 241-AX-104. Closure of the resulting penetration holes may be stipulated by WAC requirements. A stand alone grouting capability deployable by the CPP has been developed. This qualification test plan defines testing of this capability to be performed at the Immobilized Low Activity Waste Disposal Complex.
Date: October 15, 1998
Creator: CALLAWAY, W.S.

Hanford Tanks Initiative cone penetrometer siting plan and progress report

Description: The HTI subsurface characterization task will use the Hanford Cone Penetrometer platform (CPP) to deploy soil sensor and sampling probes into the vadose zone/soils around AX-104 during FY-99. This Siting Plan describes activities and actions undertaken in support of CPP deployment: deployment goals, maps of the deployment sites/locations, pre-activity (siting-related) documentation tasks, a summary of activities that have been completed to date, and an estimated schedule of additional planned activities.
Date: October 15, 1998
Creator: IWATATE, D.F.

Measurements of Surface Ocean Carbon Dioxide Partial Pressure During WOCE

Description: All of the technical goals of the World Ocean Circulation Experiment (WOCE) field program which were supported under the Department of Energy research grant ''Measurements of Surface Ocean Carbon Dioxide Partial Pressure During WOCE'' (DE-FG03-90ER60981) have been met. This has included the measurement of the partial pressures of carbon dioxide (C0{sub 2}) and nitrous oxide (N{sub 2}O) in both the surface ocean and the atmosphere on 24 separate shipboard expedition legs of the WOCE Hydrographic Programme. These measurements were made in the Pacific, Indian and Atlantic Oceans over a six-and-a-half year period, and over a distance of nearly 200,000 kilometers of ship track. The total number of measurements, including ocean measurements, air measurements and standard gas measurements, is about 136,000 for each gas, or about 34,000 measurements of each gas in the ocean and in the air. This global survey effort is directed at obtaining a better understanding of the role of the oceans in the global atmospheric budgets of two important natural and anthropogenic modulators of climate through the ''greenhouse effect'', CO{sub 2} and N{sub 2}O, and an important natural and anthropogenic modulator of the Earth's protective ozone layer through catalytic processes in the stratosphere, N{sub 2}O. For both of these compounds, the oceans play a major role in their global budgets. In the case of CO{sub 2}, roughly half of the anthropogenic production through the combustion of fossil fuels has been absorbed by the world's oceans. In the case of N{sub 2}O, roughly a third of the natural flux to the atmosphere originates in the oceans. As the interpretation of the variability in the oceanic distributions of these compounds improves, measurements such as those supported by this research project are playing an increasingly important role in improving our understanding of natural and anthropogenic influences on climate and ozone. ...
Date: October 15, 1998
Creator: Weiss, R.F.

Alignment and micro-inspection system

Description: A video microscope system has been designed and installed in the C-tank, a 3-g, high-explosive firing chamber in HEAF (High Explosives Applications Facility in LLNL). This microscope system helps a great deal, not only for precision alignment of the laser beam on the minute target for the Fabry-Perot velocimeter, but also for in situ inspection of the target before and after the experiment. In addition, the video information can also be stored in the PC computer as database documentati
Date: September 15, 1998
Creator: Chau, H; Hodgin, R L & Moua, K

Application of system simulation for engineering the technical computing environment of the Lawrence Livermore National Laboratorie

Description: This report summarizes an investigation performed by Lawrence Livermore National Laboratory´┐Ż s (LLNL) Scientific Computing & Communications Department (SCCD) and the Garland Location of Raytheon Systems Company (RSC) from April through August.1998. The study assessed the applicability and benefits of utilizing System Simulation in architecting and deploying technical computing assets at LLNL, particularly in support of the ASCI program and associated scientific computing needs. The recommendations and other reported findings reflect the consensus of the investigation team. The investigation showed that there are potential benefits to performing component level simulation within SCCD in support of the ASCI program. To illustrate this, a modeling exercise was conducted by the study team that generated results consistent with measured operational performance. This activity demonstrated that a relatively modest effort could improve the toolset for making architectural trades and improving levels of understanding for managing operational practices. This capability to evaluate architectural trades was demonstrated by evaluating some of the productivity impacts of changing one of the design parameters of an existing file transfer system. The use of system simulation should be tailored to the local context of resource requirements/limitations, technology plans/processes/issues, design and deployment schedule, and organizational factors. In taking these matters into account, we recommend that simulation modeling be employed within SCCD on a limited basis for targeted engineering studies, and that an overall performance engineering program be established to better equip the Systems Engineering organization to direct future architectural decisions and operational practices. The development of an end-to-end modeling capability and enterprise-level modeling system within SCCD is not warranted in view of the associated development requirements and difficulty in determining firm operational performance requirements in advance of the critical architectural decisions. These recommendations also account for key differences between the programmatic and institutional environments at LLNL and RSC.
Date: September 15, 1998
Creator: Boyd, V; Edmunds, T; Minuzzo, K; Powell, E & Roche, L

Comparison of natural convection heat exchangers for solar water heating systems

Description: Thermosyphon heat exchangers are used in indirect solar water heating systems to avoid using a pump to circulate water from the storage tank to the heat exchanger. In this study, the authors consider the effect of heat exchanger design on system performance. They also compare performance of a system with thermosyphon flow to the same system with a 40W pump in the water loop. In the first part of the study, the authors consider the impact of heat exchanger design on the thermal performance of both one- and two-collector solar water heaters. The comparison is based on Solar Rating and Certification Corporation (SRCC) OG300 simulations. The thermosyphon heat exchangers considered are (1) a one-pass, double wall, 0.22 m{sup 2}, four tube-in-shell heat exchanger manufactured by AAA Service and Supply, Inc., (the Quad-Rod); (2) a two-pass, double wall, 0.2 m{sup 2}, tube-in-shell made by Heliodyne, Inc., but not intended for commercial development; (3) a one-pass, single wall, 0.28 m{sup 2}, 31 tube-in-shell heat exchanger from Young Radiator Company, and (4) a one-pass single-wall, 0.61 m{sup 2}, four coil-in-shell heat exchanger made by ThermoDynamics Ltd. The authors compare performance of the systems with thermosyphon heat exchangers to a system with a 40 W pump used with the Quad-Rod heat exchanger. In the second part of the study, the effects of reducing frictional losses through the heat exchanger and/or the pipes connecting the heat exchanger to the storage tank, and increasing heat transfer area are evaluated in terms of OG300 ratings.
Date: September 15, 1998
Creator: Davidson, J. & Liu, W.

Decontamination of Radionuclides from Concrete During and After Thermal Treatment

Description: The objective was to clarify from the theoretical viewpoint the mechanical, diffusional, thermodynamic and electromagnetic aspects of the decontaminations problem, by means of developing a powerful computational model to evaluate the effect of a very rapid heating regime on the on the contaminated concrete walls or slabs. The practical objective was to assess the feasibility of the microwave heating scheme envisaged and determine its suitable parameters such as power and duration. This objective was complementary to, but separate from, the chemical and nuclear aspects of long-time processes that led to the contamination and various conceivable alternative methods of decontamination which were investigated by Dr. Brian Spalding of Oak Ridge National Laboratory, with whom the start-up phase of this project was coordinated.
Date: September 15, 1998
Creator: Bazant, Z. P.

[Develop mine communications system]. Final technical report

Description: The objective of this project was to develop, design, and build a system prototype to demonstrate the practicality of two-way, wireless through-the-earth communications between the interior of a mine and the surface. The system was to communicate data for process and environment monitoring and control, and provide real-time voice communication for emergency situations and for daily operations use. Transmitters and receivers were designed, built, and tested in actual mines. A wireless in-mine communications system was also developed. The feasibility of the concept and the marketability of the product were successfully demonstrated. Additional work must be done to make the product suitable for, and marketable to, the coal mining industry.
Date: September 15, 1998
Creator: Meiksin, Z.H.

Dickinson Pure Air Combustion ERIP technical progress report number 4 [for the reporting period 7/98 through 9/98]

Description: Research was focused on work done to date and melding with current market conditions and demand. The overall objective of this program is to demonstrate the feasibility of EnerTech`s combustion technology to produce clean energy efficiently and cost effectively from coal and/or other char slurry fuels. From the data generated in this project, EnerTech will be able to conduct preliminary engineering design work for a process development unit. The design work included simulations that optimize process cycle efficiency, and includes analysis of process temperature, pressures, and mass/energy flows. The overall goal is to conduct the research necessary to launch a commercial process. Market surveys indicated that stand-alone systems would not find a near-term market; therefore, the company is concentrating on a configuration that includes a process that first generates a slurry char product.
Date: September 15, 1998
Creator: Klosky, M.

Final Report: Computer Games to Teach Geography: El Nino: Mysteries of the Pacific and Mysteries of the Antarctic, August 15, 1994 - June 20, 1998

Description: During the period covered by this project we have accomplished all the objectives described in our original proposal. The main achievement, however, has been to bring to the commercial market an excellent quality education software product. This highest level of quality has been recognized by the Software Publisher Association, which has awarded its most prestigious appreciation, the Codie Award, for our first product Ocean Expeditions: El Nino. With regards to commercialization, we have developed, as a Phase III project, a comprehensive business plan which we have used to find a publisher/distributor of our products (Tom Snyder Productions) and are presently updating to raise private funding. Also, we have been awarded a 5-year Cooperative Agreement by NASA to continue the development of our products and bring five new products to the education market by the early part of the millennium.
Date: September 15, 1998
Creator: Gautier-Downes, Catherine

Managing America's solid waste

Description: This report presents an historical overview of the federal role in municipal solid waste management from 1965 to approximately 1995. Attention is focuses on the federal role in safeguarding public health, protecting the environment, and wisely using material and energy resources. It is hoped that this report will provide important background for future municipal solid waste research and development initiatives.
Date: September 15, 1998
Creator: Phillips, J. A.