UNT Libraries Government Documents Department - 197,650 Matching Results

Search Results

open access

A New Form of Standard Resistance

Description: Report issued by the Bureau of Standards over new developments of electrical resistivity in manganin wire coils. The results of the developments are discussed. This report includes tables, illustrations, and photographs.
Date: October 1, 1908
Creator: Rosa, Edward B.
open access

Damping Coefficients Due to Tail Surfaces in Aircraft

Description: "The object of the investigation described in this report was to compare the damping coefficients of an airfoil as calculated from a knowledge of the static characteristics of the section with those obtained experimentally with an oscillation. The damping coefficients as obtained, according to the conventional notation, can be considered either as due to pitching or as due to yawing, the oscillation in these experiments being so arranged that the surfaces oscillate about a vertical axis. This i… more
Date: January 1, 1923
Creator: Chu, Lynn
open access

Use of Sulphite Cellulose Extract as a Tanning Material

Description: Report issued by the Bureau of Standards over chemicals used for tanning leather hides. As stated in the introduction: "an investigation was conducted to determine the suitability of sulfite cellulose extracts, derived from the waste liquors discharged from paper pulp mills, for use in tanning hides for the manufacture of leather" (p. 309). This report includes tables, and photographs.
Date: November 1, 1926
Creator: Wallace, E. L. & Bowker, Roy Clement
open access

Aircraft Woods: Their Properties, Selection, and Characteristics

Description: From Summary: "This report presents, further, information on the properties of various other native species of wood compared with spruce, and discusses the characteristics of a considerable number of them from the standpoint of their possible application in aircraft manufacture to supplement the woods that are now most commonly used."
Date: January 1, 1930
Creator: Markwardt, L. J.
open access

A Method of Calculating the Ultimate Strength of Continuous Beams

Description: The purpose of this study was to investigate the strength of continuous beams after the elastic limit has been passed. As a result, a method of calculation, which is applicable to maximum load conditions, has been developed. The method is simpler than the methods now in use and it applies properly to conditions where the present methods fail to apply.
Date: February 1, 1930
Creator: Newlin, J. A. & Trayer, George W.
open access

Pressure distribution over the fuselage of a PW-9 pursuit airplane in flight

Description: "This report presents the results obtained from pressure distribution tests on the fuselage of a PW-9 pursuit airplane in a number of conditions of flight. The investigation was made to determine the contribution of the fuselage to the total lift in conditions considered critical for the wing structure, and also to determine whether the fuselage loads acting simultaneously with the maximum tail loads were of such a character as to be of concern with respect to the structural design of other par… more
Date: August 1, 1930
Creator: Rhode, Richard V. & Lundquist, Eugene E.
open access

Flame Movement and Pressure Development in an Engine Cylinder

Description: "This investigation describes a visual method for making stroboscopic observations, through a large number of small windows, of the spread of flame throughout the combustion chamber of a gasoline engine. Data, secured by this method on a small engine burning gaseous fuels, are given to show the effects of mixture ratio, spark advance, engine speed, charge density, degree of dilution, compression ratio, and fuel composition on flame movement in the cylinder. Partial indicator diagrams showing pr… more
Date: May 1, 1931
Creator: Marvin, Charles F., Jr. & Best, Robert D.
open access

Air flow in a separating laminar boundary layer

Description: Report discussing the speed distribution in a laminar boundary layer on the surface of an elliptic cylinder, of major and minor axes 11.78 and 3.98 inches, respectively, has been determined by means of a hot-wire anemometer. The direction of the impinging air stream was parallel to the major axis. Special attention was given to the region of separation and to the exact location of the point of separation. An approximate method, developed by K. Pohlhausen for computing the speed distribution, th… more
Date: December 1, 1934
Creator: Schubauer, G. B.
open access

Characteristics of the NACA 23012 airfoil from tests in the full-scale and variable-density tunnels

Description: "This report gives the results of tests in the NACA full-scale and variable-density tunnels of a new wing section, the NACA 23012, which is one of the more promising of an extended series of related airfoils recently developed. The tests were made at several values of the Reynolds number between 1,000,000 and 8,000,000. The new airfoil develops a reasonably high maximum lift and a low profile drag, which results in an unusually high value of the speed-range index. In addition, the pitching-mome… more
Date: March 1, 1935
Creator: Jacobs, Eastman N. & Clay, William C.
open access

General Airplane Performance

Description: "Equations have been developed for the analysis of the performance of the ideal airplane, leading to an approximate physical interpretation of the performance problem. The basic sea-level airplane parameters have been generalized to altitude parameters and a new parameter has been introduced and physically interpreted. The performance analysis for actual airplanes has been obtained in terms of the equivalent ideal airplane in order that the charts developed for use in practical calculations wil… more
Date: June 1, 1937
Creator: Rockfeller, W. C.
open access

Model Study of Channel Improvement and Stabilization in the Pryors Island Reach of the Ohio River

Description: This technical memorandum constitutes a complete report on a model study of the Pryors Island reach of the Ohio River, made for the purpose of determining the most effective plan of regulating works for the further improvement and stabilization of the navigable channel.
Date: September 1, 1938
Creator: Waterways Experiment Station (U.S.)
open access

The Precipitation of Uranium Peroxide in the Presence of Fluorides

Description: The large-scale recovery of uranium from materials which also contained great quantities of fluorides did not give a product which had a low enough fluoride content to be treated satisfactorily by the other extraction process. The objective of the investigations carried out in this laboratory was a method of reducing the amount of fluoride which accompanied the uranium. The material from which the uranium was recovered in the industrial process was a slag containing (in addition to uranium) mag… more
Date: January 1, 1941
Creator: King, Edward J.
Back to Top of Screen