UNT Libraries Government Documents Department - 2,074 Matching Results

Search Results

open access

Determination of Heavy Water Purity by Infrared Absorption

Description: The practical application of heavy water purity determination by infrared absorption spectroscopy using standard laboratory equipment was demonstrated in connection with the operation of heavy water-moderated Special Power Excursion Reactor Test (SPERT II) Facillty at the NRTS. (auth)
Date: January 16, 1962
Creator: Abernathey, R. M. & Morgan, T. D.
open access

Analysis of Electric Energy Usage in Air Force Houses Equipped with Air-to-Air Heat Pumps

Description: From Introduction: "One part of this study, which is presented in this Monograph, consists of an analysis of electric energy usage and electric power demand data obtained from a sample group of occupied houses at Little Rock Air Force Base in Arkansas, equipped with heat pumps, water heaters, cooking ranges, clothes dryers, and miscellaneous appliances all operated by electricity."
Date: July 13, 1962
Creator: Achenbach, Paul R.; Davis, Joseph C. & Smith, William T.
open access

Some fundamental aspects of vaporization

Description: A discussion of the fundamental aspects of vaporization is presented along with a discussion of evaporation within the theories of solids and gases. Suggestions are offered as to where assumptions might be introduced to describe the phenomenon more completely, and tenative definitions concerning factors which can give rise to vaporization coefficients are given. An effort is made to unify these concepts within the phenomenological framework of irreversible thermodynamics. (J.R.D.)
Date: December 1, 1962
Creator: Ackermann, R. J.; Thorn, R. J. & Winslow, G. H.
open access

SNAP re-entry orbit; comments on the atmospheric entry and discussion of a proposed test

Description: In order to evaluate entry into the atmosphere of an oblate (equatorial bulge) earth a standard atmosphere was used in conjunction with the standard rotating oblate spheroid. The density variation encountered in any one polar orbit around the earth will vary by about a factor of ten, due to oblateness. Therefore, the important effects on the re-entry trajectory are atmospheric density and oblateness of the earth. The SNAP configuration burn up characteristics will differ considerably between th… more
Date: August 3, 1962
Creator: Ackermann, W. O.; Arthur, P. D. & Nelson, D. K.
open access

COMPARATIVE COST STUDY OF PROCESSING STAINLESS STEEL-JACKETED UO$sub 2$ FUEL: MECHANICAL SHEAR-LEACH VS SULFEX-CORE DISSOLUTION

Description: The economics of mechanical shear-leach and Sulfex decladding-core dissolution head end treatments for processing typical tubular bundles of stainless steel-jacketed UO/sub 2/ nuclear fuels were compared. A 2.66 metric ton U/day head end portion of a plant was designed for each process and capital and operating costs were developed. For plants of this size and larger, mechanical shear-leach processing has the advantage of ~20% lower capital cost and 50% lower operating cost. Processing costs of… more
Date: April 23, 1962
Creator: Adams, J. B.; Benis, A. M. & Watson, C. D.
open access

Automatic processing system for film badges

Description: A semiautomatic film badge system was developed to process dosimeter film faster and more reliably than the previously used manual method. The films are automatically loaded and unloaded from the badges and marked with identifying numbers, manually developed, and automatically read. The resultant information is punched into IBM cards. (auth)
Date: September 1, 1962
Creator: Adams, J. W.
open access

Reactions of Preoxidized Beryllium Powder in Moist Carbon Dioxide

Description: Breakaway corrosion of Be in moist CO2 can be avoided if the Be is fabricated using preoxidized powder. The powder is preoxidized by heating in dry O/sub 2/. Preoxidation of Be powder was measured as a function of temperature and time of heating in O/sub 2/. The subsequent reactions of the preoxidized powder in moist CO/sub 2/ at 700 deg C were studied and the effect of increasing amounts of added oxide was measured. A model is proposed to explain the inhibition of corrosion by added oxide. (au… more
Date: June 1962
Creator: Adams, R. B.; Price, G. H. & Stuart, W. I.
open access

Symbols for Instrument Flowsheets and Drawings. A Recommended System for Application to ORNL Instrument Work

Description: Details concerning a recommended system of flow-plan symbols and drawings are given. The system is designed to identify the function of all major instrument components and to show schematically the operation of the instrument relative to the particular process. The system is used for identification and designation. (J.R.D.)
Date: June 19, 1962
Creator: Adams, R. K.; Davis, D. G.; Hyland, R. F. & Lieberman, B.
open access

Fuel Elements for the Argonne Advanced Research Reactor

Description: The core design and the fuel element concept for the high-flux Argonne Advanced Research Reactor are presented. The core is cooled and moderated by light water and utilizes beryllium as a reflector. The fuel element assembly is rhomboidal in cross section and consists of 27 plates fastened together at their edges by dovetailed locking keys, and at each end by end fittings. Each fuel plate is 40 mils thick and contains a uniform dispersion of highly enriched UO/ sub 2/ particles, up to a maximum… more
Date: January 1, 1962
Creator: Adolph, N.R.; Silberstein, M.S. & Weinstein, A.
open access

K-Reactor Retubing Program graphite temperature study

Description: A project has been proposed and the funds allocated for the replacement of the central zone aluminum process tubes at both K Reactors with smooth bore zirconium process tubes of approximately the same outside diameter as the original tubes. Associated with this project is the problem of relieving the present graphite stack distortion in the vicinity of the process tube channels and counteracting or prereliving, at this time, the expected graphite stack distortion that, will take place over the … more
Date: December 26, 1962
Creator: Agar, J. D.
open access

Experimental Cesium Line Shapes

Description: In partially-ionized cesium plasmas above 10/sup 13/ ionscm/sup -3/, the plasma-broadened lines are easily measured and can be used as a simple diagnostic method for the determination of ion density, once the width versus ion density relationship is established either theoretically or experimentally. Measured line widths are presented and results are compared with theoretical widths. The profiles of various lines of the sharp, diffuse, and fundamental series lines of cesium were measured at kno… more
Date: January 1, 1962
Creator: Agnew, L. & Summers, C.
open access

Neutron Dosimetry in and Around Human Phantoms By Use of Nuclear Track Emulsion

Description: The validity of the nuclear track emulsion technique for fast-neutron dosimetry is examined in the exposure of a human phantom to PuBe neutrons, Semiautomatic track scanning and high-speed data analysis obviate the major disadvantages of emulsion dosimetry, and allow the absolute differential proton track energy spectrum at various locations in the phantom to be obtained without a serious cost in time. From this are calculated the total absorbed local tissue dose due to proton recoils and the l… more
Date: April 1962
Creator: Akagi, Hiroaki & Lehman, Richard L.
open access

Test Program for 30 Megawatt Prototype Sodium Intermediate Heat Exchanger and Steam Generator

Description: The designer's concept of a test program for the 30-Mw prototype intermediate heat exchanger and steam generator designed and fabricated as part of the Sodium Components Development Program is presented. The performance data will serve to verify the thermal design, or allow application of improved techniques to future designs, give an improved basis for stress analysis in design of future units, and demonstrate the capability and limitations of the units in relation to the performance specifica… more
Date: September 14, 1962
Creator: Alco Products (Firm).
open access

GAUGE FOR MEASURING BOW OF TUBES

Description: A mechanical gage was designed to measure the bow over any one-foot length of long cylindrical material. The gage was used successfully for measuring bow in components of tubular fuel elements at the Savannah River Laboratory. (auth)
Date: October 31, 1962
Creator: Alewine, G.B.
Back to Top of Screen