UNT Libraries Government Documents Department - 5,741 Matching Results

Search Results

Results: 1 - 24 next
open access

A Transport Calculation of the HFIR Beam Hole Currents

Description: An estimate was made of the beam hole currents to be expected from both the radial and tangential beam holes in the present HFIR design. The angular fluxes required for these calculation were determined by an 18-group, S8 transport calculation (SNG reactor code). Both type beam holes produced thermal neutron currents of 7.5 x 10^10 neutrons/cm^2 sec. at a power level of 100 Mw. The nonthermal component of the beam current was 7.0 x 10^10 and 4.5 x 10^10 neutrons/cm^2 -sec for the radial and tan… more
Date: December 5, 1960
Creator: Claiborne, H. C. & Rakavy, G.
Item Type: Refine your search to only Report
open access

Strontium Sorption Studies Using Naturally Occurring Ion Exchange Materials

Description: Four naturally occurring materials, namely, vermiculite, variscite, Tennessee rock phosphate, and Florida pebble phosphate, were studied to determine the feasibility of their use in columns for the sorption of strontium from high pH, intermediate-level wastes produced at ORNL. Excepting vermiculite, all materials were found to be effective in strontium removal.
Date: December 5, 1960
Creator: Thomas, K. T.; Jacobs, D. G.; Tamura, T. & Struxness, E. G.
Item Type: Refine your search to only Report
open access

Chemical Development Section C Monthly Progress Report July 1959

Description: Nitrate contained in raffinates from Canadian Blind River mills interferes seriously with thorium extraction by secondary amines. With primary amines, however, the effect is negligible and these compounds are the preferred process extractants.
Date: August 5, 1959
Creator: Brown, K. B.; Allen, K. A.; Blake, C. A.; Coleman, C. F.; Crouse, D. J.; Ryon, A. D. et al.
Item Type: Refine your search to only Report
open access

A Review of the Mathematical Formulation of the Problem of Inelastic Neutron Scattering by Polycrystalline Material

Description: A self-contained developmental or the formation of the problem of inelastic neutron scattering by crystals is presented. although nearly all of the methods and results used in the present discussion have appeared in a variety of previously published papers, additional mathematical details are given here which have been found by thee authors to aid in understanding the final results.
Date: June 5, 1959
Creator: Preskitt, C. A.
Item Type: Refine your search to only Report
open access

Nuclear and Economic Characteristics of several Two-Region Homogeneous Reactors

Description: The nuclear characteristics and fuel costs of a number of aqueous homogeneous reactors have been estimated. Most of the reactors studied were cylindrical, two-region power-breeders variously having between 0 and 300 g/l of thorium in the core and between 500 and 1000 g/l of thorium in the blanket. The results of the calculations, including breeding ration, fuel inventories, doubling times, and net fuel costs, are summarized in this report.
Date: June 5, 1959
Creator: Rosenthal, M. W.
Item Type: Refine your search to only Report
open access

Gas Plated Coatings on Metals and Alloys : Progress Report No. 6 and Final Report

Description: The object of the work performed under this contract was to investigate the possibility of gas plating copper base metal with (a) pure chromium metal from chromium hexacarbonyl vapor; (b) chromium-nickel plating from a mixture of chromium hexacarbonyl and nickel tetracarbonyl. The object of the work performed during the final month was to confirm the fact that the gas plating of chromium metal and chromium-nickel laminates free from nitrides, oxides and carbides was practical.
Date: June 5, 1953
Creator: Nack, Herman; Bulloff, Jack J. & Whitacre, John R.
Item Type: Refine your search to only Report
open access

Bellows Failure in Solids Separation Loop of the HRT Mockup

Description: The failure of the valve bellows would appear to be due to a combination of stress corrosion and crevice corrosion. Stress corrosion occurred as evidenced by the transgranular branched cracking found in the bellows and in the base which which was joined to the bellows. It seems probable that chlorides were present, which, along with the residual stresses present in the bellows assembly, created the necessary conditions for stress corrosion to occur. Crevice corrosion occurred probably due to he… more
Date: February 5, 1957
Creator: Kegler, T. M., Jr. & Hammond, J. P.
Item Type: Refine your search to only Report
open access

High Pressure Flange Studies

Description: Twenty-five hundred psi ring-type flanges, ring gaskets, bolts, and special connectors were tested for adaptability to the aqueous homogenous reactor. High pressure line closures were studied to obtain empirical data pertinent to the selection or design of a connector capable of withstanding sustained thermal cycling and high pressures encountered in the aqueous homogenous reactor. Specialized stress-strain measurement techniques yielded information concerning flange deformation, ring type gask… more
Date: January 5, 1957
Creator: Fritz, K. J.
Item Type: Refine your search to only Report
open access

Operating Procedures and Emergency Plans for the Dresden Nuclear Power Station

Description: The General Electric Company is designing and building a 180,000 kilowatt nuclear power plant for the Commonwealth Edison Company at a site 47 miles southwest of Chicago. The construction permit was issued on May 4, 1956 but is subject to submittal to the Commission of a final hazards summary report and a finding by the Commission that the final design provides reasonable assurances that the health and safety of the public will not be endangered by operation of the reactor in accordance with th… more
Date: June 5, 1958
Creator: Commonwealth Edison Company
Item Type: Refine your search to only Report
open access

Steam Slip and Burnout in Bulk Boiling Systems

Description: In concurrent flow of two phase mixtures there exists a velocity difference between the vapor and liquid phases. This difference in velocity is known as the slip velocity. The prediction of slip is the subject of Part I. In boiling systems there is some heat transfer rate at which nucleste boiling becomes unstable. At this point the separate bubbles coalesce forming an insulating vapor film on the heat transfer surface resulting in the destruction, or burnout, of the heater. The prediction of t… more
Date: June 5, 1957
Creator: Gelson, A. E.
Item Type: Refine your search to only Report
open access

The Development of Fixed Screen Resin-In-Pulp Devices

Description: A resin-in-pulp process was developed using a series of fixed-screen or Winchester cells. Various laboratory and pilot plant models were constructed and tested under simulated plant conditions. The fixed-screen device proved very effective in the recovery of uranium and/or vanadium by a continuous, resin-in-pulp process.
Date: August 5, 1954
Creator: Charles, W. D.; Thorpe, D. F.; Lower, G. W.; Kaufman, David; Schiff, Norman N.; Abrams, Charles S. et al.
Item Type: Refine your search to only Report
open access

A Physical Property Summary for Fluoride Mixtures

Description: This report presents a summary of certain physical properties that have been determined experimentally on the fluoride mixture that have been formulated at ORNL (Rers. 1, 2). These properties include the density, enthalpy, heat capacity, heat of fusion, thermal conductivity, viscosity, Prandtl number, electrical conductivity and surface tension. In addition to the experimental data, values have been predicted for the heat capacity and density of the other mixtures from the correlations of these… more
Date: September 5, 1956
Creator: Cohen, S. I.; Povers, W. D. & Greene, N. D.
Item Type: Refine your search to only Report
open access

Analytical Chemistry Division Semiannual Progress Report for Period Ending April 20, 1954

Description: Progress report of the Oak Ridge National Laboratory Analytical Chemistry Division providing updates on various projects, experiments, and other work in ionic analyses, analytical instrumentation, radiochemical analyses, activation analyses, spectrochemical analyses, inorganic preparations, optical and electron microscopy.
Date: July 5, 1956
Creator: Kelley, M. T.; Susano, C. D. & Raaen, H. P.
Item Type: Refine your search to only Report
open access

Fabrication of Heat Exchangers and Radiators for High Temperature Reactor Applications

Description: Two 500-kw fused-fluoride-to-Nak heat exchangers, two 500-kw NaK-to-air radiators, and a 20-tube high-velocity heat exchanger were fabricated for a heat-exchanger development program. A construction procedure, utilizing both inert-arc-welding and high temperature dry-hydrogen brazing, was used successfully on all of the units. The tube-to-header joints were welded and back-brazed; the manifold joints were inert-arc-welded with full penetration; and the tube-to-fin joints were brazed. A detailed… more
Date: July 5, 1955
Creator: Patriarca, P; Slaughter, G. M.; Manly, W. D.; Heestand, R. L.; Clausing, R. K.; Conner, O. K. et al.
Item Type: Refine your search to only Report
open access

Homogeneous Reactor Test Summary Report for the Advisory Committee on Reactor Safeguards

Description: The Homogeneous Reactor Test (HRT) is the experimental reactor facility (Frontispiece) being designed and constructed at ORNL as the next step in homogeneous reactor development between the 1-Mv HRE and a "full-scale" power station. The HRT will provide an integrated test at 5 to 10 Mv for the flowsheet and equipment designs on which the full-scale effort will be based. Furthermore, its design is such that several homogeneous systems which require essentially the same operating equipment may be… more
Date: January 5, 1955
Creator: Beall, S. E. & Visner, S.
Item Type: Refine your search to only Report
open access

Beam Current Integrator

Description: The object of this report is to acquaint the operator with the operational and technical aspects of the beam current integrator as well as the theory of the system operation. The design and operation of a beam current integrator are described, and the theory of operation is discussed. The instrument has two channels. The console channel is designed to measure the accumulation of charge received by a target during a period of a day no matter what the range used in the experimenter's channel. An … more
Date: January 5, 1962
Creator: Jacobs, J.
Item Type: Refine your search to only Report
open access

Efficiency pf Multiple Traversal Targets

Description: The efficiency of multiple traversal targets is defined as the probability that a proton dies by making a nuclear collision in the target rather than by hitting the limit of the synchrotron aperture. The efficiencies of Be, Al, Cu, and Pb targets are shown for 15 and 30-Bev protons in the Brooknaven AGS. Beryllium was found to be the most efficient. (M.C.G.)
Date: February 5, 1962
Creator: Courant, E.D.
Item Type: Refine your search to only Report
open access

Absorption and Turnover Rates of Iron Measured by the Whole Body Counter

Description: Human iron metabolism has been extensively studied in the past twenty-five years with the radioisotopes iron⁵⁵ and iron⁵⁹. Before the availability of the whole body counter, however, iron absorption studies were performed by the indirect methods of fecal assay of unabsorbed radioiron, and estimation of red cell incorporation of absorbed tracer. The few long-term excretion studies performed required numerous assumptions, since human iron excretion was less well understood. Whole body counting pr… more
Date: September 5, 1962
Creator: Price, D. C.; Cohn, S. H. & Cronkite, B. P.
Item Type: Refine your search to only Report
open access

A Study of the Wear and Galling of Autoclaved Zircaloy-2 By Various Materials

Description: This is the third of a series of reports describing the phases of a study of the wear and galling of autoclavedZircaloy-2 by various bearing surface materials. The first report (1) showed that increasing contact area between the autoclaved Zircaloy-2 surfaces will not prevent scratching. It also showed that metals softer than Zircaloy-2 in general do not scratch it. The second report (2) described how eight metals and alloys were wear-tested on autoclaved Zircaloy-2 as prospects for fuel elemen… more
Date: July 5, 1960
Creator: Weber, J. W.
Item Type: Refine your search to only Report
Back to Top of Screen