UNT Libraries Government Documents Department - 76 Matching Results

Search Results

Results: 1 - 50 next
2020 Vision Project Summary, FY98
The 2020 Vision project began in 1996 with two participating teachers and four classes. It has since grown to comprise more than a dozen participating teachers and hundreds of students across the country. Much of this growth took place in FY98, thanks to the accomplishment of several major goals: implementation of a mentor program, enhanced teacher training, a mid-year conference for students, recruitment of distant schools, and the development of an interactive Web site. The first part of this report describes these accomplishments, as well as future directions for 2020 Vision. The second part summarized the scenarios students wrote during the 1997-98 school year. it identifies recurrent themes in the students' scenarios and compares/contrasts them with scenarios written in the first two years of the project.
AIDS Funding for Federal Government Programs: FY1981-FY1999
This report provides a synopsis of the budget activity related to AIDS from the discovery of the disease in 1981 through FY1999. Funding for AIDS research, prevention and treatment programs within the Department of Health and Human Services (HHS) discretionary budget has increased from $200,000 in FY1981 to an estimated $3.85 billion in FY1999.
Annual Report - FY 1998, Shipments to and from the Nevada Test Site (NTS)
This report summarizes waste shipments to the Nevada Test Site Radioactive Waste Management Sites at Area 3 and Area 5 during fiscal year 1998. In addition this report provides a summary evaluation of each shipping campaign by source (waste generator) which identifies observable incidents, if any, associated with the actual waste shipments.
Appropriations for FY1998: District of Columbia
No Description Available.
Appropriations for FY1998: Foreign Operations, Export Financing, and Related Programs
No Description Available.
Appropriations for FY1998: Interior and Related Agencies
The annual Interior and Related Agencies Appropriations bill includes funding for agencies and programs in four separate federal departments, as well as numerous smaller agencies and diverse programs. This report discusses the FY1998 appropriations authorized under this bill.
Appropriations for FY1998: Labor, Health and Human Services, and Education
No Description Available.
Appropriations for FY1998: Military Construction
No Description Available.
Appropriations for FY1998: U.S. Department of Agriculture and Related Agencies
No Description Available.
Appropriations for FY1998: VA, HUD, and Independent Agencies
No Description Available.
The Budget for Fiscal Year 1998
This report discusses the efforts to reach an agreement on the fiscal year (FY) 1998 budget were, in many respects, a continuation of the efforts to balance the federal budget by (or before) FY2002. The proposals and legislation for FY1998 were designed to move the budget further towards balance.
Cash and Noncash Benefits for Persons With Limited Income: Eligibility Rules, Recipient and Expenditure Data, FY1996-FY1998
This report provides basic eligibility rules, recipient numbers, and FY1996-FY1998 expenditure data for 80 programs that have provided cash or non-cash benefits to low-income persons.
Characterize and Model Final Waste Formulations and Offgas Solids from Thermal Treatment Processes - FY-98 Final Report for LDRD 2349
The purpose of LDRD #2349, Characterize and Model Final Waste Formulations and Offgas Solids from Thermal Treatment Processes, was to develop a set of tools that would allow the user to, based on the chemical composition of a waste stream to be immobilized, predict the durability (leach behavior) of the final waste form and the phase assemblages present in the final waste form. The objectives of the project were: • investigation, testing and selection of thermochemical code • development of auxiliary thermochemical database • synthesis of materials for leach testing • collection of leach data • using leach data for leach model development • thermochemical modeling The progress toward completion of these objectives and a discussion of work that needs to be completed to arrive at a logical finishing point for this project will be presented.
Core Capabilities and Technical Enhancement -- FY-98 Annual Report
The Core Capability and Technical Enhancement (CC&TE) Program, a part of the Verification, Validation, and Engineering Assessment Program, was implemented to enhance and augment the technical capabilities of the Idaho National Engineering and Environmental Laboratory (INEEL). The purpose for strengthening the technical capabilities of the INEEL is to provide the technical base to serve effectively as the Environmental Management Laboratory for the Office of Environmental Management (EM). An analysis of EM's science and technology needs as well as the technology investments currently being made by EM across the complex was used to formulate a portfolio of research activities designed to address EM's needs without overlapping work being done elsewhere. An additional purpose is to enhance and maintain the technical capabilities and research infrastructure at the INEEL. This is a progress report for fiscal year 1998 for the five CC&TE research investment areas: (a) transport aspects of selective mass transport agents, (b) chemistry of environmental surfaces, (c) materials dynamics, (d) characterization science, and (e) computational simulation of mechanical and chemical systems. In addition to the five purely technical research areas, this report deals with the science and technology foundations element of the CC&TE from the standpoint of program management and complex-wide issues. This report also provides details of ongoing and future work in all six areas.
Core capabilities and technical enhancement, FY-98 annual report
The Core Capability and Technical Enhancement (CCTE) Program, a part of the Verification, Validation, and Engineering Assessment Program, was implemented to enhance and augment the technical capabilities of the Idaho National Engineering and Environmental Laboratory (INEEL). The purpose for strengthening the technical capabilities of the INEEL is to provide the technical base to serve effectively as the Environmental Management Laboratory for the Department of Energy's Office of Environmental Management (EM). An analysis of EM's science and technology needs as well as the technology investments currently being made by EM across the complex was used to formulate a portfolio of research activities designed to address EM's needs without overlapping work being done elsewhere. An additional purpose is to enhance and maintain the technical capabilities and research infrastructure at the INEEL. This is a progress report for fiscal year 1998 for the five CCTE research investment areas: (a) transport aspects of selective mass transport agents, (b) chemistry of environmental surfaces, (c) materials dynamics, (d) characterization science, and (e) computational simulation of mechanical and chemical systems. In addition to the five purely technical research areas, this report deals with the science and technology foundations element of the CCTE from the standpoint of program management and complex-wide issues. This report also provides details of ongoing and future work in all six areas.
The Department of Energy FY1998 Research and Development Budget and Issues
This report focuses on the R&D programs. DOE has divided its activities into four major business categories: Resource, Science and Technology, National Security, and Environmental Quality. Each has an R&D component, although the R&D funding is concentrated in the first three. Table 1 (on the next page) shows FY1997 R&D funding, the FY1998 request, and the FY1998 appropriation actions by those categories
The Department of Energy's FY1998 Budget
This issue brief describes the FY1998 request for DOE's major programs, its implications, and congressional action on the DOE budget. Table 1 at the end of the issue brief highlights the FY1998 DOE budget request. House and Senate marks and the final budget enacted will be included in revised versions as the appropriations bills move through the Congress.
DISCOM2: Distance Computing the SP2 Pilot FY98 Report
As a way to bootstrap the DISCOM(2) Distance Computing Program the SP2 Pilot Project was launched in March 1998. The Pilot was directed towards creating an environment to allow Sandia users to run their applications on the Accelerated Strategic Computing Initiative's (ASCI) Blue Pacific computation platform, the unclassified IBM SP2 platform at Lawrence Livermore National Laboratory (LLNL). The DISCOM(2) Pilot leverages the ASCI PSE (Problem solving Environment) efforts in networking and services to baseline the performance of the current system. Efforts in the following areas of the pilot are documented: applications, services, networking, visualization, and the system model. It details not only the running of two Sandia codes CTH and COYOTE on the Blue Pacific platform, but also the buildong of the Sandia National Laboratories (SNL) proxy environment of the RS6000 platforms to support the Sandia users.
The Economic Impact of Sandia National Laboratories on Central New Mexico and the State of New Mexico Fiscal Year 1998
Sandia National Laboratories (SNL) is a Department of Energy federally funded national security laboratory that uses engineering and science to ensure the security of the Nation. SNL provides scientific and engineering solutions to meet national needs in nuclear weapons and related defense systems, energy security, and environmental integrity. SNL works in partnerships with universities and industry to enhance their mission and transfer technology that will address emerging national challenges for both government and industry. For several years, the U.S. Department of Energy (DOE) Albuquerque Operations Office (AL) and New Mexico State University (NMSU) have maintained an inter-industry, input-output (I/O) model with capabilities to assess the impacts of developments initiated outside the economy such as federal DOE monies that flow into the state, on an economy. This model will be used to assess economic, personal income and employment impacts of SNL on Central New Mexico and the State of New Mexico. Caution should be exercised when comparing economic impacts between fiscal years prior to this report. The I/O model was rebased for FY 1998. The fringe benefits coefficients have been updated for the FY 1996 and FY 1997 economic impacts analysis. Prior to FY 1993 two different I/O base models were used to estimate the impacts. New technical information was released by the Bureau of Economic Analysis (BEA), U.S. Department of Commerce in 1991 and in 1994 and was incorporated in FY 1991, FY 1993, and FY 1994 I/O models. Also in 1993, the state and local tax coefficients and expenditure patterns were updated from a 1986 study for the FY 1992 report. Further details about the input-output model can be found in ''The Economic Impact of the Department of Energy on the State of New Mexico--FY 1998'' report by Lansford, et al. (1999). For this report, the reference period is …
Electrical resistivity monitoring of the single heater test in Yucca Mountain FY98 -- 1st quarter results
Of the several thermal, mechanical and hydrological measurements being used to monitor the rockmass response in the Single Heater Test, electrical resistance tomography (ERT) is being used to monitor the movement of liquid water with a special interest in the movement of condensate out of the system. Images of resistivity change were calculated using data collected before, during and after the heating episode. This report will concentrate on the results obtained after heating ceased; previous reports discuss the results obtained during the heating phase. The changes recovered show a region of increasing resistivity approximately centered around the heater as the rock mass cooled. The size of this region grows with time and the resistivity increases become stronger. The increases in resistivity are caused by both temperature and saturation changes. The Waxman Smits model has been used to calculate rock saturation after accounting for temperature effects. The saturation estimates suggest that during the heating phase, a region of drying forms around the heater. During the cooling phase, the dry region has remained relatively stable. Wetter rock regions which developed below the heater during the heating phase, are slowly becoming smaller in size during the cooling phase. The last set of images indicate that some rewetting of the dry zone may be occurring. The accuracy of the saturation estimates depends on several factors that are only partly understood.
Energy Storage Systems Program Report for FY98
Sandia National Laboratories, New Mexico, conducts the Energy Storage Systems Program, which is sponsored by the U.S. Department of Energy's Office of Power Technologies. The goal of this program is to collaborate with industry in developing cost-effective electric energy storage systems for many high-value stationary applications. Sandia National Laboratories is responsible for the engineering analyses, contracted development and testing of energy storage components and systems. This report details the technical achievements realized during fiscal year 1998.
Enhanced surveillance program annual report FY98. Dynamic behavior of Pu and U (intermediate strain rates) -- LA12
The Kolsky-Hopkinson Bar Dynamic Test Facility in Building PF-4 at TA-55 recently became operational and the first series of plutonium samples from a baseline alloy were successfully tested on December 8, 1997 through the dedicated efforts of a large number of people in groups NMT-9, NMT-11, MST-8, NMT-5, and JCI. The Enhanced Surveillance Program provided the necessary support for this achievement. The Kolsky-Hopkinson bar is an instrument designed to measure the uniaxial compression stress-strain characteristics of special nuclear materials (SNM) in a glovebox environment at intermediate strain rates (typically 500 s{sup {minus}1} to 10,000 s{sup {minus}1}), over a wide temperature range (cryogenic up to near-melting temperatures), and up to strains of about 50% per test. Due to radiation contamination hazards, SNM samples are contained within a specially designed glovebox with only a small portion of the bar system. The uniaxial high-strain-rate deformation behavior of SNM materials is revealed by stress-strain-strain rate curves calculated from strain signals acquired by gauges on the pressure bars. The compressive stress-strain mechanical behavior of a range of weapons-relevant SNM materials (both baseline and stockpile-aged plutonium and enriched uranium), measured over a wide range of strain rates and temperatures, is necessary to support the development of predictive constitutive models and allows assessment of the mechanical response of SNM as a function of age, processing, and composition. Accurate constitutive material models are essential for simulating the high-rate deformation response of weapon materials. Most FY98 milestones and deliverables were successfully met or were partially completed on schedule. In the case of enriched uranium, testing began six months ahead of schedule. Upgrading the testing temperature capability took six months more than originally planned as a result of the highly formalized and rigorous design change plan (DCP) requirements at TA-55. Specimen availability continues to be a bottle-neck due to over-subscribed …
Environmental Protection Agency: FY1998 Budget
EPA appropriations are included in the annual VA-HUD-Independent Agencies Appropriation Bill. Two major issues were whether Superfund cleanups should be accelerated in the absence of statutory reforms and whether the requested state assistance funds are adequate. Because the House and Senate were in agreement on not granting the requested 50% increase in Superfund and in passing increased state funds, the chief conference issue focused on the roughly $225 million difference between the House and Senate versions.
Environmental Protection Agency: FY1998 Budget
EPA appropriations are included in the annual VA-HUD-Independent Agencies Appropriation Bill. Two major issues were whether Superfund cleanups should be accelerated in the absence of statutory reforms and whether the requested state assistance funds are adequate. Because the House and Senate were in agreement on not granting the requested 50% increase in Superfund and in passing increased state funds, the chief conference issue was expected to focus on the roughly $225 million difference between the House and Senate versions. However, a veto threat over Superfund program funding made this a key conference issue.
Expedited technology demonstration project (Revised mixed waste management facility project) Project baseline revision 4.0 and FY98 plan
The re-baseline of the Expedited Technology Demonstration Project (Revised Mixed Waste Facility Project) is designated as Project Baseline Revision 4.0. The last approved baseline was identified as Project Baseline Revision 3.0 and was issued in October 1996. Project Baseline Revision 4.0 does not depart from the formal DOE guidance followed by, and contained in, Revision 3.0. This revised baseline document describes the MSO and Final Forms testing activities that will occur during FY98, the final year of the ETD Project. The cost estimate for work during FY98 continues to be $2.OM as published in Revision 3.0. However, the funds will be all CENRTC rather than the OPEX/CENTRC split previously anticipated. LLNL has waived overhead charges on ETD Project CENRTC funds since the beginning of project activities. By requesting the $2.OM as all CENTRC a more aggressive approach to staffing and testing can be taken. Due to a cost under- run condition during FY97 procurements were made and work was accomplished, with the knowledge of DOE, in the Feed Preparation and Final Forms areas that were not in the scope of Revision 3.0. Feed preparation activities for FY98 have been expanded to include the drum opening station/enclosure previously deleted.
Federal Geothermal Geoscience Research Fiscal Year 1998
No Description Available.
Federal Pay: FY 1998 Salary Adjustments
This report provides an overview of federal pay Salary adjustments for Fiscal Year 1998
Federal Pay: FY1998 Salary Adjustments
This report provides an overview of federal pay Salary adjustments for the Fiscal Year 1998
Federal R&D Funding Trends In Five Agencies: NSF, NASA, NIST, DOE (Civilian) and NOAA
This report includes a brief analysis of federal research and development funding trends for the past six years as well as R&D funding projects to FY2000.
Fiscal Year 1998 Continuing Resolutions
No Description Available.
Fiscal year 1998 memorandum of understanding for the TWRS characterization project
During fiscal year 1998, the level of success achieved by the Tank Waste Remediation System (TWRS) shall be determined by specific performance measures. These measures take the form of significant deliverables, one of which is the completion of Tank Characterization Reports (TCRs). In order to achieve success regarding the TCR performance deliverable, multiple organizations across TWRS must work together. Therefore, the requirements and expectations needed from each of these TWRS organizations were examined in order to gain an understanding of the performance necessary from each organization to achieve the end deliverable. This memorandum of understanding (MOU) documents the results of this review and establishes the performance criteria by which TWRS will assess its progress and success. These criteria have been determined based upon a TWRS Characterization Project budget of $47.5 million for fiscal year 1998; if this budget is changed or the currently identified work scope is modified, this MOU will need to be revised accordingly. This MOU is subdivided into six sections, where sections three through six each identify individual interfaces between TWRS organizations. The specific performance criteria related to each TWRS organizational interface are then delineated in the section, along with any additional goals or issues pertaining to that interface.
Fiscal Year 1998 report theoretical studies of ground energy coupling
A method for calculating the redistribution of resonance radiation in hot, dense plasmas is developed by extending the Frequency Fluctuation Model (FFM). This paper is devoted to a brief review of lineshape theory in the linear response approximation, and an introduction to the FFM approach to the modeling of lineshapes in plasmas. This discussion begins with a consideration of the spectral lines emitted by complex ions in plasmas. As is well known, the lineshape is determined by the time- dependent coupling of the ion with the plasma environment. This plasma-emitter interaction, leads to Stark broadening of the spectral lines, and traditionally has been considered in the approximation which treats the ef&@ of the electrons on the emitting ion in the impact limit while the ionic perturbation is� taken to be quasi-static. In this approximation, the time dependence of the perturbation has been eliminated, resulting in a spectral line shape that has purely homogeneous and inhomogeneous contributions and that is described by a simple sum of independent electron imp� act broadened static components. In order to clarify the concepts presented, examples of radiative redistribution functions for simple cases are presented. Included is an example of an X-ray laser pumped system which illustrates the capability of the mpdel to provide a sensitive method for the study of radiative transfer under plasma conditions of partial redistribution. That is, in cases where the strong mixing limit is not attained so that the mixing of the inhomogeneous spectral line components is not fast enough to produce a completely redistributed line.
Fiscal Year 1998 Well Installation, Plugging and Abandonment, and Redevelopment summary report Y-12 Plant, Oak Ridge, Tennessee
This report summarizes the well installation, plugging and abandonment, and redevelopment activities conducted during the federal fiscal year (FY) 1998 at the Y-12 Plant, Oak Ridge, Tennessee. Five new groundwater monitoring wells were installed at the Y-12 Plant under the FY 1998 drilling program. Two of the wells are located in west Bear Creek Valley, one is in the eastern Y-12 Plant area near Lake Reality, and two are located near the Oil Landfarm Waste Management Area, which were installed by Bechtel Jacobs Company LLC (Bechtel Jacobs) as part of a site characterization activity for the Oak Ridge Reservation (ORR) Disposal Cell. Also, two existing wells were upgraded and nine temporary piezometers were installed to characterize hydrogeologic conditions at the Disposal Cell site. In addition, 40 temporary piezometers were installed in the Boneyard/Bumyard area of Bear Creek Valley by Bechtel Jacobs as part of the accelerated remedial actions conducted by the Environmental Restoration Program. Ten monitoring wells at the Y-12 Plant were decommissioned in FY 1998. Two existing monitoring wells were redeveloped during FY 1998 (of these, GW-732 was redeveloped tsvice). All well installation and development (including redevelopment) was conducted following industry-standard methods and approved procedures from the Environmental Surveillance Procedures Quality Control Program (Energy Systems 1988); the Resource Conservation and Recovery Act (RCRA) Groundwater Monitoring Technical Enforcement Guidance Document (EPA 1992); and the Monitoring Well Installation Plan for the Department of Energy Y-12 Plant, Oak Ridge, Tennessee (Energy Systems 1997a). Well installation and development of the non-Y-12 Plant GWPP oversight installation projects were conducted using procedures/guidance defined in the following documents: Work Plan for Support to Upper East Fork Poplar Creek East End Volatile Organic Compound Plumes Well Installation Project, Oak Ridge Y-12 Plant, Oak Ridge, Tennessee (SAIC 1998a); Sampling and Analysis Plan for the Oil Landfarm Soils Containment …
Fiscal years 1994--1998 Information Technology Strategic Plan. Volume 1
A team of senior managers from across the US Nuclear Regulatory Commission (NRC), working with the Office of Information Resources Management (IRM), has completed an NRC Strategic Information Technology (IT) Plan. The Plan addresses three major areas: (1) IT Program Management, (2) IT Infrastructure, and (3) Information and Applications Management. Key recommendations call for accelerating the replacement of Agency workstations, implementing a new document management system, applying business process reengineering to selected Agency work processes, and establishing an Information Technology Council to advise the Director of IRM.
Functional Design Criteria for Fy 1993-2000 Groundwater Monitoring Wells
The purpose of this revision is to update the Line Item Project, 93-L-GFW-152 Functional Design Criteria (FDC) to reflect changes approved in change control M-24-91-6, Engineering Change Notices (ECNs), and expand the scope to include subsurface investigations along with the borehole drilling. This revision improves the ability and effectiveness of maintaining RCRA and Operational groundwater compliance by combining borehole and well drilling with subsurface data gathering objectives. The total projected number of wells to be installed under this project has decreased from 200 and the scope has been broadened to include additional subsurface investigation activities that usually occur simultaneously with most traditional borehole drilling and monitoring well installations. This includes borehole hydrogeologic characterization activities, and vadose monitoring. These activities are required under RCRA 40 CFR 264 and 265 and WAC 173-303 for site characterization, groundwater and vadose assessment and well placement.
FY 1998 waste information requirements document
The Waste Information Requirements Document describes the activities of the Tank Waste Remediation System (TWRS) Characterization Project that provide characterization information on Hanford Site waste tanks. The characterization information is required to perform operations and meet the commitments of TWRS end users. These commitments are derived from the Hanford Federal Facility Agreement and Consent Order, also known as the Tri-Party Agreement; the Recommendation 93-5 Implementation Plan to the Defense Nuclear Facilities Safety Board (DNFSB); and other directives as listed in Section 4.0. This Waste Information Requirement Document applies to Fiscal Years 1997 and 1998 activities. Its contents are based on the best information available in August 1997. The format and content are based on the directions of DOE-RL (Sieracki, 1997) and Fluor Daniel Hanford Incorporated (Umek, 1997). Activities, such as the revision of the Tank Characterization Technical Sampling Basis (Brown et al. 1997), the revision of the data quality objectives (DQOs), issue closures, discussions with Ecology, and management decisions may cause subsequent updates to the Waste Information Requirements Document.
FY1998 Annual Self-Evaluation Report for the Pacific Northwest National Laboratory
No Description Available.
FY1998 USDA Budget and Appropriations: Domestic Food Programs
No Description Available.
FY98 final report for the expedited technology demonstration project: demonstration test results for the integrated MSO waste treatment system
Molten Salt Oxidation (MSO) is a promising alternative to incineration for the treatment of a variety of organic wastes. Lawrence Livermore National Laboratory (LLNL) has prepared a facility in which an integrated pilot-scale MSO treatment system is being tested and demonstrated. The system consists of a MSO vessel with a dedicated off-gas treatment system, a salt recycle system, feed preparation equipment, and a ceramic final waste forms immobilization system. This integrated system was designed and engineered based on operational experience with an engineering-scale reactor unit and extensive laboratory development on salt recycle and final forms preparation. The MSO/off-gas system has been operational since December 1997. The salt recycle system and the ceramic final forms immobilization became operational in May and August, 1998, respectively. We have tested the MSO facility with various organic feeds, including chlorinated solvents, tributyl phosphate/kerosene, PCB-contaminated waste oils & solvents, booties, plastic pellets, ion exchanged resins, activated carbon, radioactive-spiked organics, and well-characterized low-level liquid mixed wastes. MSO is shown to be a versatile technology for hazardous waste treatment and may be a solution to many waste disposal problems in DOE sites. This report presents the results obtained from operation of the integrated pilot-scale MSO treatment system through September 1998, and therefore represents a final report for fiscal year 1998 activities.
FY98 Final Report Initial Interfacial Chemical Control for Enhancement of Composite Material Strength
The U.S. Army Armament Research Development and Engineering Center (ARDEC) sponsored this research project to support the development of new self-assembled monolayer fiber coatings. These coatings can greatly increase the bond strength between the fiber and the resin matrix of a composite material. Composite ammunition components molded from such materials will exhibit higher strength than current materials, and will provide a major improvement in the performance of composites in military applications. Use of composite materials in military applications is desirable because of the lighter weight of the materials and their high strengths. The FY97 project investigated initial interfacial chemical control for enhancement of composite material strength. The core of the project was to modify the covalent interface of glass fibers (or other reinforcing fibers) to induce strong, uniform, defect-free adhesion between the fibers' surfaces and the polymer matrix. Installing a self-assembled monolayer tailored to the specific matrix resin accomplished this. Simply, the self-assembled monolayer modifies the fiber to make it appear to have the same chemical composition as the resin matrix. The self-assembled monolayer creates a receptive, hydrophobic interface that the thermoset resin (or polymer precursors) would wet more effectively, leading to a higher contact surface area and more efficient adhesion. The FY97 work phase demonstrated that it is possible to increase the adhesive strength, as well as increase the heat deflection temperature through the use of self-assembled monolayer.
FY98 Status Report on the HSV
The HSV in storage in MTF has been monitored during FY98, and its overpressure has been sampled and analyzed.
Geochemical alteration of backfill FY98 status report
The Yucca Mountain Project is considering some type of backfill, possibly emplaced as a capillary barrier, for inclusion in the Engineering Barrier System (EBS) at the potential Yucca Mountain nuclear waste repository site. The performance of capillary barriers in isothermal, low- temperature, environments has been studied extensively (e.g., Ho and Webb, 1998; OZdenburg and Pruess, 1993; Ross, 1990). The performance of capillary barriers in an non-isothermal, high temperature environment, such as during the thermal pulse phase of a nuclear waste repository, has received much less attention. One concern is that the backfill materials may be altered from that of the as-placed material by the hydrothermal regime imposed by the emplacement of waste in the repository, changing hydrologic properties in a way that degrades the performance of the EBS system. This report is a status report on our efforts to address this concern. The work was initiated by SCR #98-76-041 and was authorized to begin at LLNL in summer 1998. This report is organized as follows. In the first part, we discuss our understanding of the relevant issues of backfill performance based on thermal hydrology. We focus here on changes to hydrologic properties, but we recognize that changes to thermal, mechanical and chemical (e.g., sorptive) properties are also important. Our primary interest is in addressing concerns over possible changes in the magnitude of key hydrologic properties (i.e., porosity, permeability, and moisture retention characteristics) that could significantly affect the design performance of backfill in the EBS. We report on what we know from previous work about geochemical alteration of backfill material, focusing primarily on crushed tuff. In the second part of this report, we present our progress on geochemical studies on backfill materials. These include sub-boiling, two-phase column experiments, batch experiments at above boiling temperatures and associated numerical modeling.
Geothermal Energy Draft Multi-Year Program Plan: FY 1996-2000
This is an internal DOE Geothermal Program planning and control document. The Five Year Plans and Multi-Year Plans usually included more detailed rationales and projections than other similar reports. Many of these reports were issued only in draft form.
Geothermal Energy Multi-Year Program Plan, FY 1994-1998
This is an internal DOE Geothermal Program planning and control document. The Five Year Plans and Multi-Year Plans usually included more detailed rationales and projections than other similar reports. Many of these reports were issued only in draft form. (DJE 2005)
Geothermal Energy Program: Five Year Plan FY 1993-1998
No Description Available.
Idaho Nuclear Technology and Engineering Center Low-Activity Waste Process Technology Program FY-98 Status Report
The Low-Activity Waste Process Technology Program at the Idaho Nuclear Technology and Engineering Center (INTEC) anticipates that large volumes of low-level/low-activity wastes will need to be grouted prior to near-surface disposal. During fiscal year 1998, three grout formulations were studied for low-activity wastes derived from INTEC liquid sodium-bearing waste. Compressive strength and leach results are presented for phosphate bonding cement, acidic grout, and alkaline grout formulations. In an additional study, grout formulations are recommended for stabilization of the INTEC underground storage tank residual heels.
Idaho Nuclear Technology and Engineering Center Low-Activity Waste Process Technology Program, FY-98 Status Report
The Low-Activity Waste Process Technology Program at the Idaho Nuclear Technology and Engineering Center (INTEC) anticipates that large volumes of low-level/low-activity wastes will need to be grouted prior to near-surface disposal. During fiscal year 1998, three grout formulations were studied for low-activity wastes derived from INTEC liquid sodium-bearing waste. Compressive strength and leach results are presented for phosphate bonding cement, acidic grout, and alkaline grout formulations. In an additional study, grout formulations are recommended for stabilization of the INTEC underground storage tank residual heels.
Idaho Nuclear Technology and Engineering Center Low-Activity Waste Process Technology Program FY-98 Status Report
The Low-Activity Waste Process Technology Program at the Idaho Nuclear Technology and Engineering Center (INTEC) anticipates that large volumes of low-level/low-activity wastes will need to be grouted prior to near-surface disposal. During fiscal year 1998, three grout formulations were studied for low-activity wastes derived from INTEC liquid sodium-bearing waste. Compressive strength and leach results are presented for phosphate bonding cement, acidic grout, and alkaline grout formulations. In an additional study, grout formulations are recommended for stabilization of the INTEC underground storage tank residual heels.
Institutional Plan, FY 1995--2000
Sandia recently completed an updated strategic plan, the essence of which is presented in chapter 4. Sandia`s Strategic Plan 1994 takes its direction from DOE`s Fueling a Competitive Economy: Strategic Plan and provides tangible guidance for Sandia`s programs and operations. Although it is impossible to foresee precisely what activities Sandia will pursue many years from now, the strategic plan makes one point clear: the application of our scientific and engineering skills to the stewardship of the nation`s nuclear deterrent will be central to our service to the nation. We will provide the necessary institutional memory and continuity, experience base, and technical expertise to ensure the continued safety, security, and reliability of the nuclear weapons stockpile. As a multiprogram laboratory, Sandia will also continue to focus maximum effort on a broad spectrum of other topics consistent with DOE`s enduring core mission responsibilities: Defense (related to nuclear weapons), Energy, Environment (related to waste management and environmental remediation), and Basic Science.
Integrated computer control system CORBA-based simulator FY98 LDRD project final summary report
The CORBA-based Simulator was a Laboratory Directed Research and Development (LDRD) project that applied simulation techniques to explore critical questions about distributed control architecture. The simulator project used a three-prong approach comprised of a study of object-oriented distribution tools, computer network modeling, and simulation of key control system scenarios. This summary report highlights the findings of the team and provides the architectural context of the study. For the last several years LLNL has been developing the Integrated Computer Control System (ICCS), which is an abstract object-oriented software framework for constructing distributed systems. The framework is capable of implementing large event-driven control systems for mission-critical facilities such as the National Ignition Facility (NIF). Tools developed in this project were applied to the NIF example architecture in order to gain experience with a complex system and derive immediate benefits from this LDRD. The ICCS integrates data acquisition and control hardware with a supervisory system, and reduces the amount of new coding and testing necessary by providing prebuilt components that can be reused and extended to accommodate specific additional requirements. The framework integrates control point hardware with a supervisory system by providing the services needed for distributed control such as database persistence, system start-up and configuration, graphical user interface, status monitoring, event logging, scripting language, alert management, and access control. The design is interoperable among computers of different kinds and provides plug-in software connections by leveraging a common object request brokering architecture (CORBA) to transparently distribute software objects across the network of computers. Because object broker distribution applied to control systems is relatively new and its inherent performance is roughly threefold less than traditional point-to-point communications, CORBA presented a certain risk to designers. This LDRD thus evaluated CORBA to determine its performance and scaling properties and to optimize its use within the ICCS. …
Back to Top of Screen