UNT Libraries Government Documents Department - 671 Matching Results

Search Results

open access

50 kWp Photovoltaic Concentrator Application Experiment, Phase I. Final report, 1 June 1978-28 February 1979

Description: This program consists of a design study and component development for an experimental 50-kWp photovoltaic concentrator system to supply power to the San Ramon substation of the Pacific Gas and Electric Company. The photovoltaic system is optimized to produce peaking power to relieve the air conditioning load on the PG and E system during summer afternoons; and would therefore displace oil-fired power generation capacity. No electrical storage is required. The experiment would use GaAs concentra… more
Date: June 15, 1979
Creator: Maget, H.J.R.
open access

244-S Catch Station conceptual design report

Description: The faciliies described will provide a direct route from the 241-S-151 and 241-U-151 Diversion Boxes to the 241-SY Tanks. The 244-S Catch Station will consist of a 20,000 gallon primary tank contained within a concrete vault lined with carbon steel. Encased three-inch carbon steel process lines will be extended to the catch station pump pit from the 241-SY Tank Farm, the 241-S-151 Diversion Box and the 241-U-151 Diversion Box encasement. The facility will have its own ventilation system for exh… more
Date: October 15, 1976
Creator: Garfield, J. S.
open access

Access to the energy system network simulator (ESNS), via remote computer terminals. [BNL CDC 7600/6600 computer facility]

Description: The Energy System Network Simulator (ESNS) flow model is installed on the Brookhaven National Laboratory (BNL) CDC 7600/6600 computer facility for access by off-site users. The method of access available to outside users is through a system called CDC-INTERCOM, which allows communication between the BNL machines and remote teletype terminals. This write-up gives a brief description of INTERCOM for users unfamiliar with this system and a step-by-step guide to using INTERCOM in order to access ES… more
Date: August 15, 1976
Creator: Reisman, A W
open access

Acoustic velocity measurement across the diameter of a liquid metal column

Description: Present techniques for measuring sound velocity in liquid metals have been limited by the use of transducers which cannot survive in extreme temperature conditions. These methods also require relatively long measurement times. An optical noncontacting method has been developed which may be used for extremely short experimental times and very high temperatures and pressures. This technique is being incorporated into an isobaric expansion apparatus in which a 1 mm diam wire sample in a high press… more
Date: May 15, 1978
Creator: Calder, C.A. & Wilcox, W.W.
open access

Actinide cross section data and inertial confinement fusion for long term waste disposal

Description: Actinide cross section data at thermonuclear neutron energies are needed for the calculation of ICF pellet center burnup of fission reactor waste, viz. 14 MeV neutron fission of the very long-lived actinides that pose storage problems. A major advantage of pellet center burnup is safety: only milligrams of highly toxic and active material need to be present in the fusion chamber, whereas blanket burnup requires the continued presence of tons of actinides in a small volume. The actinide data tab… more
Date: January 15, 1979
Creator: Meldner, Heiner
open access

Additions to generating capacity 1978--1987 for the contiguous United States: as projected by the Regional Electric Reliability Councils in their April 1, 1978 long-range coordinated planning reports to the Department of Energy

Description: Comparison of the 1978 projections of the Reliability Councils with those made the previous year indicates three major changes in electric utility planning: (1) a reduction in total capacity additions for the 10-year planning period, (2) a significant decrease in nuclear additions, and (3) a shift from oil and gas to coal as a source of primary energy. Nuclear capacity continues to far overshadow fossil-fuel capacity in the unit-size range 1000 MW and up, with the reverse true for unit sizes le… more
Date: September 15, 1978
open access

Advanced subsystems development. Second semi-annual progress report, April 1--October 1, 1978

Description: The concept design for a small (less than 10 MWe) solar thermal electric generating plant was completed using projected 1985 technology. The systems requirements were defined and specified. The components, including an engineering prototype for one 15 kWe module of the generating plant, were conceptually designed. Significant features of the small solar thermal power plant were identified as the following: (1) 15-kWe Stirling-cycle engine/alternator with constant power output; (2) 10-meter poin… more
Date: November 15, 1978
open access

Aerial Radiometric and Magnetic Survey Tularosa National Topographic Map, Nex Mexico: Volume 1

Description: From Operational Program: This final report includes a general geologic description of the area, including descriptions of the various geologic units and correlates the airborne data to the geologic units as provided by the geologic maps. Also included is a frequency distribution study of the data as a function of the geologic units encountered over the NTMS area including the tie line data.
Date: December 15, 1978
Creator: United States. Department of Energy. Grand Junction Office.
open access

The alleged 231-Z discharge of plutonium to the 216-Z-19 Ditch, February 1977

Description: This report describes circumstances involved in the alleged 91.2 grams of plutonium released to the 216-Z-19 Ditch from the 231-Z facility. The following areas were reviewed: 231-Z liquid waste data collected by Battelle-Northwest and Rockwell Hanford Operations (Rockwell); the sampling methods used by Battelle and Rockwell; and operating conditions in the 231-Z and 234-5Z Buildings at the time of the alleged release.
Date: March 15, 1978
Creator: Wheeler, R. E.
open access

Alloy evaluation for fossil fuel process plants (liquefaction). Annual report, 1 October 1976--30 September 1977

Description: ASTM mechanical property specification verification tests have been conducted on the 2 /sup 1///sub 4/ Cr--1 Mo steel. The base properties have been determined for the steel at various temperatures and after exposure to various environments. Compression load versus deflection calibration curves have been determined for 316 SS loading rings. Thermal expansivity of both the 2 /sup 1///sub 4/ Cr--1 Mo steel and 316 SS have been determined at 500/sup 0/F and 900/sup 0/F. Thermal expansion character… more
Date: October 15, 1977
Creator: Woods, C. M. & Scott, T. E.
open access

Alloy evaluation for fossil fuel process plants (liquefaction). Quarterly report, 1 April--30 June 1977

Description: ASTM mechanical property specification verification tests have been conducted on the 2 /sup 1///sub 4/ Cr--1 Mo steel. The base properties have been determined for the steel and calibrations on the thermal expansivity of both the 2 /sup 1///sub 4/ Cr--1 Mo steel and 316 SS for use as loading rings have been completed.
Date: July 15, 1977
Creator: Woods, C. M. & Scott, T. E.
open access

Alloy evaluation for fossil fuel process plants (liquefaction). Quarterly report, 1 January 1978--31 March 1978

Description: The objective of this program is to evaluate the mechanical properties of liquefaction process plant ''dissolver'' vessel materials in a ''dissolver'' vessel environment including coal slurry and pressurized hydrogen gas at temperatures up to 900/sup 0/F. Specifically, the degradation of notched-bar and smooth bar tensile samples of 2/sup 1///sub 4/ Cr--1 Mo will be monitored as a function of exposure time and stress in the ''dissolver'' vessel environment. This quarter was spent entirely on in… more
Date: April 15, 1978
Creator: Woods, C. M. & Scott, T. E.
open access

Alloy evaluation for fossil fuel process plants (liquefaction). Quarterly report for April 1--June 30, 1977

Description: ASTM mechanical property specification verification tests have been conducted on the 2 /sup 1///sub 4/ Cr-1 Mo steel. The base properties have been determined for the steel and calibrations on the thermal expansivity of both the 2 /sup 1///sub 4/ Cr-1 Mo steel and 316 SS for use as loading rings have been completed.
Date: July 15, 1977
Creator: Woods, C. M. & Scott, T. E.
open access

Alloy evaluation for fossil fuel process plants (liquefaction). Quarterly report, October 1, 1977--December 31, 1977

Description: Base properties have been determined for A387-74A-Gr. 22-Cl. 2 steel at various temperatures in inert environments. Tests have been completed to monitor the actual stress level as a function of exposure time in tensile samples loaded in pre-compressed rings. Samples were exposed under various stress levels at 900/sup 0/F to determine the amount of creep during the 168 hour exposures. Results of all exposure tests (including samples under load during exposure with and without creep, in inert gas… more
Date: January 15, 1978
Creator: Woods, C. M. & Scott, T. E.
Back to Top of Screen