UNT Libraries Government Documents Department - 195 Matching Results

Search Results

Results: 1 - 24 next
open access

Alloys of Uranium with Zirconium, Chromium, Columbium, Vanadium, and Molybdenum

Description: Abstract: Information on five uranium binary alloy systems has been surveyed. These systems are the alloys of uranium with zirconium, chromium, columbium, vanadium, and molybdenum. The equilibrium diagrams are discussed, and where available, data have been included on diffusion studies, cladding experiments, and mechanical properties.
Date: June 19, 1952
Creator: Saller, Henry A. & Rough, Frank A.
Item Type: Refine your search to only Report
open access

The Ammonium Carbonate Pressure Leaching of Uranium Ores Proposed as Feed to the Pilot Plant at Grand Junction, Colorado : Progress Report

Description: From introduction: This is Progress report BMI-282, the first of a series covering the operation of the pressure-leaching towers for the extraction of uranium by an ammonium carbonate leach...This report discusses the data obtained from tests run to show the effects of such variables as the amount of air and carbon dioxide passed through the pulp, temperature, pressure, and concentration of ammonium carbonate and ammonium bicarbonate in the leach solution on the extraction of uranium.
Date: June 15, 1955
Creator: Wheeler, C. M.; Langston, B. G. & Stephens, F. M., Jr.
Item Type: Refine your search to only Report
open access

An Application of the Concepts of Particle Packing to the Consolication of Silicon Carbide Powders

Description: From introduction: Silicon carbide is being considered as a basis material for nonmetallic fuel elements because of its high thermal conductivity, low nuclear cross section, high resistance to thermal rupture, and high degree of stability at high temperature in air. A requirement of the fuel elements is that they be thin and have as low porosity as possible. One shape of element under consideration is 0.050 to 0.070 inch thick by a few inches in width and breadth.
Date: August 15, 1952
Creator: Harman, Cameron G.; Shinn, J., Jr. & Wagner, H. E.
Item Type: Refine your search to only Report
open access

Aqueous Corrosion of Uranium Fuel-Element Cores Containing 0 to 20 w/o Zirconium

Description: Abstract: A description is given of the design and operation of a windowed autoclave system employed in the study of corrosion by pressurized hot water. The device has been used to obtain time-lapse motion pictures of the swelling and rupture of deliberately defected zirconium-clad uranium specimens. A method is described by which corrosion rates were calculated from pressure and temperature measurements. A typical set of pictures taken during a test is presented, and corrosion rates are report… more
Date: January 7, 1957
Creator: Grieser, Daniel R. & Simons, Eugene M.
Item Type: Refine your search to only Report
open access

Carbide Coatings on Graphite

Description: From abstract: "A Method has been developed for the uniform coating of graphite tubes with carbides of niobium, tantalum, and zirconium by thermal composition of their respective halide vapors."
Date: 1957
Creator: Blocher, John M., Jr.; Ish, Carl J.; Leiter, Don P.; Plock, Layne F. & Campbell, Ivor E.
Item Type: Refine your search to only Report
open access

Centrifugal Casting of Aluminum-Uranium Alloys

Description: "Centrifugal-casting techniques were investigated as a method of producing hollow cylindrical extrusion billets of aluminum-35 w/o uranium. Among the variables evaluated were melt temperature, mold and pouring-spout configurations, mold speed, and method of pouring. With the equipment employed it was found that the best castings were produced stilizing a pouring temperature of 2400 F, a heavy-walled steel cylinder rotating between 700 to 900 rpm for the mold and bottom-pouring technique employi… more
Date: July 20, 1959
Creator: Daniel, Norman E.; Foster, Ellis L. & Dickerson, Ronald F.
Item Type: Refine your search to only Report
open access

Centrifugal casting of plate-type fuel elements

Description: From introduction: "Centrifugal casting appeared to be the only method by which the intricate shape could be produced in a cold mold. With this in mind, a program was initiated for the purpose of determining the feasibility of centrifugally casting plates of uranium-5 w.o chromium and uranium-2 w/o zirconium."
Date: November 10, 1955
Creator: Saller, Henry A.; Dickerson, Ronald F. & Murr, William E.
Item Type: Refine your search to only Report
open access

Characterization of Inclusion in Dingot Uranium

Description: Abstract: The nonmetallic inclusions in both as-reduced and fabricated dingot uranium have been studied for comparison with those in ingot uranium. Special attention was paid to the hydride for the purpose of determining the amount and distribution in the various types of uranium. The types and distribution of other inclusions were also studied. It was found that the dingot uranium was of a higher quality than ingot uranium and was comparable to as-reduced derby uranium on the basis of over-all… more
Date: January 11, 1957
Creator: Cheney, Donald M. & Dickerson, Ronald F.
Item Type: Refine your search to only Report
open access

The Cladding of Delta-Phase Zirconium Hydride

Description: Abstract: A study has been made of the cladding of solid and powdered delta-phase zirconium hydride is both red and flat shapes with stainless steel. The program included investigations of metallurgical bonding, both with and without the sore of metallic barrier materials. Types 304 and 347 stainless steel were used for cladding material. The intermediate barrier-layer materials used were niobium, molybdenum, a combination of copper and molybdenum, and a combination of copper and niobium. The p… more
Date: December 27, 1957
Creator: Paprocki, Stan J.; Hodge, Edwin S. & Boyer, Charles B.
Item Type: Refine your search to only Report
open access

Composition of vapors from boiling nitric acid solutions

Description: From abstract: "The composition of vapors from aqueous nitric acid solutions boiling at 200 mm mercury total pressure is established for solutions containing between - and 67.5 w/o nitric acid. The volatility characteristics of low concentrations of chloride in the same concentration range of nitric acid have been measured in solutions boiling at 200 mm mercury. The effects of chloride concentration and pressure of boiling are evaluated. A spectrophotometric method of the determination of chlor… more
Date: February 9, 1955
Creator: Crooks, R. C.; Wilson, R. Q.; Bearse, A. E. & Filbert, Robert B.
Item Type: Refine your search to only Report
open access

Corrosion in 650 F Degassed Water of Uranium-Molybdenum Alloys Containing Impurity Additions

Description: From introduction: "At the request of WAPD, a study has been made of the effect of minor compositional variables on the corrosion behavior of uranium-molybdenum alloys in 650 F degassed water."
Date: October 6, 1955
Creator: Cawthorne, Edward W.; Berry, Warren E., 1922-; Reynolds, James E.; Jaffee, Robert Isaac, 1917- & Peoples, Robert S.
Item Type: Refine your search to only Report
open access

Corrosion of Type 347 Stainless Steel in the Uranium-Derby Pickle Bath

Description: Abstract: In one of the final stages of the process at the Mallinckrodt Uranium Refining Center, a 45 per cent nitric acid solution at about 170 F is used to pickle the calcined magnesium fluoride scale off the uranium derbies. The increase in the fluoride-ion content of the bath tends to promote corrosion of the Type 347 stainless tanks. This attack becomes excessive if 0.3 g/liter of fluoride ion or more is present. It was found that if aluminum ion is added to the solution the corrosiveness … more
Date: July 14, 1954
Creator: Peoples, R. S.; Fink, F. W.; Stewart, O. M. & Braun, W. J.
Item Type: Refine your search to only Report
Back to Top of Screen