UNT Libraries Government Documents Department - 18 Matching Results

Search Results

Results: 1 - 18
open access

An Additional Investigation of the High-Speed Lateral-Control Characteristics of Spoilers

Description: Report presenting an investigation of the characteristics of partial-span spoilers located at 0.75 of the chord on an NACA 66-series tapered wing, especially at high speeds. The effect of small spoiler projections was found to increase with an increase in speed until the critical Mach number was exceeded.
Date: June 1945
Creator: Laitone, Edmund V. & Summers, James L.
Item Type: Refine your search to only Report
open access

Completed Tabulation in the United States of Tests of 24 Airfoils at High Mach Numbers (Derived From Interrupted Work at Guidonia, Italy in the 1.31- by 1.74-Foot High-Speed Tunnel)

Description: Two-dimensional data were obtained in Mach range of from 0.40 to 0.94 and Reynolds Number range of (3.4 - 4.2) X 10 Degrees. Results indicate that thickness ratio is dominating shape parameter at high Mach numbers and that aerodynamic advantages are attainable by using thinnest possible sections. Effects of jet boundaries, Reynolds Number, and Data presented are free from jet-boundary and humidity effects.
Date: June 1945
Creator: Ferri, Antonio
Item Type: Refine your search to only Report
open access

Cooling Characteristics of a Pratt and Whitney R-2800 Engine Installed in an NACA Short-Nose High-Inlet-Velocity Cowling

Description: An investigation was made of the cooling characteristics of a P and W R-2800 engine with NACA short-nose high inlet-velocity cowling. The internal aerodynamics of the cowling were studied for ranges of propeller-advance ratio and inlet-velocity ratio obtained by deflection of cowling flaps. Tests included variations of engine power, fuel/air ratio and cooling-air pressure drop. Engine cooling data are presented in the form of cooling correlation curves, and an example for calculation of cooling… more
Date: June 1944
Creator: Corson, Blake W. & McLellan, Charles H.
Item Type: Refine your search to only Report
open access

The Effect of Inlet Pressure and Temperature on the Efficiency of a Single Stage Impulse Turbine Having an 11.0-Inch Pitch-Line Diameter Wheel

Description: Efficiency tests have been conducted on a single-stage impulse engine having an 11-inch pitch-line diameter wheel with inserted buckets and a fabricated nozzle diaphragm. The tests were made to determine the effect of inlet pressure, Inlet temperature, speed, and pressure ratio on the turbine efficiency. An analysis is presented that relates the effect of inlet pressure and temperature to the Reynolds number of the flow. The agreement between the analysis and the experimental data indicates tha… more
Date: June 1945
Creator: Gabriel, David S.; Carman, L. Robert & Trautwein, Elmer E.
Item Type: Refine your search to only Report
open access

Effects of Direction of Propeller Rotation on the Longitudinal Stability of the 1/10-Scale Model of the North American XB-28 Airplane With Flaps Neutral

Description: "The effects of direction of propeller rotation on factors affecting the longitudinal stability of the XB-28 airplane were measured on a 1/10-scale model in the 7- by 10-foot tunnel of the Ames Aeronautical Laboratory. The main effect observed was that caused by regions of high downwash behind the nacelles (power off as well as power on with flaps neutral). The optimum direction of propeller rotation, both propellers rotating up toward the fuselage, shifted this region off the horizontal tail a… more
Date: June 1942
Creator: Delany, Noel K.
Item Type: Refine your search to only Report
open access

Effects on Low-Speed Spray Characteristics of Various Modifications to a Powered Model of the Boeing XPBB-1 Flying Boat

Description: Report presenting tests of a powered model of the Boeing XPBB-1 flying boat in order to observe the effects of trim and powered propellers, of lengths of forebody and afterbody, and of various spray strips on the low-speed spray characteristics. The effects of powering the propellers were to lower the trim and to pick up spray that would not strike the propeller disks when the propellers were windmilling. Results regarding the effects of trim and powered propellers, effect of length of forebody… more
Date: June 1945
Creator: King, Douglas A. & Mas, Newton A.
Item Type: Refine your search to only Report
open access

Experiments on Drag of Revolving Disks, Cylinders and Streamline Rods at High Speeds

Description: Report presenting an experimental investigation concerned primarily with the extension of test data on the drag of revolving disks, cylinders, and streamline rods to high Mach numbers and Reynolds numbers. The tests generally confirm earlier theories and add in some new results. One of the primary findings of interest is that skin friction does not depend on Mach number.
Date: June 1944
Creator: Theodorsen, Theodore & Regier, Arthur
Item Type: Refine your search to only Report
open access

Flight tests of an all-movable vertical tail on the Fairchild XR2K-1 airplane

Description: Report presenting flight tests of an all-movable vertical tail of reduced area of the Fairchild XR2K-1 airplane. Results are in agreement with previously obtained data on a larger all-movable tail. Results regarding rudder effectiveness, directional stability, rudder-free lateral motion, rudder hinge moments, and areas of future research are provided.
Date: June 1943
Creator: Kleckner, Harold F.
Item Type: Refine your search to only Report
open access

Parameters determining performance of supersonic pilotless airplanes powered by ram-compression power planes

Description: Report presenting the dimensional parameters of ram-compression power plants as related to their thrust and economy performance and an investigation of the speed and range performance possibilities of a family of pilotless airplanes powered with one of the power plants. The analysis of the power plants includes the power-plant configuration, aerodynamic and thermodynamic cycle, constants used in the computations, power-plant performance, and operation of the power unit with fixed areas at vario… more
Date: June 1946
Creator: Hill, Paul R.
Item Type: Refine your search to only Report
open access

Performance of compressor-turbine jet-propulsion systems

Description: Report presenting an analysis of the performance of compressor-turbine jet-propulsion systems carried out by calculating the thrust power from a compressor-turbine jet engine with a systematic variation of pressure ratio, fuel-air ratio, compressor and turbine efficiencies, flight speed, altitude, and maximum gas temperature.
Date: June 1945
Creator: Palmer, Carl B.
Item Type: Refine your search to only Report
open access

Preliminary Report on Laminar-Flow Airfoils and New Methods Adopted for Airfoil and Boundary-Layer Investigations

Description: "Recent developments in airfoil-testing methods and fundamental air-flow investigations, as applied to airfoils, are discussed. Preliminary test results, obtained under conditions relatively free from stream turbulence and other disturbances, are presented. Suitable airfoils and airfoil-design principles were developed to take advantage of the unusually extensive laminar boundary layers that may be maintained under the improved testing conditions" (p. 1).
Date: June 1939
Creator: Jacobs, Eastman N.
Item Type: Refine your search to only Report
open access

The Reaction Jet as a Means of Propulsion at High Speeds

Description: Report presenting a simple equation that can be used to facilitate the appraisal of the conventional jet as a means of propulsion. The equation can be used to estimate the performance of a large variety of aeropropulsive devices. The results using this equation indicate that attainable propulsive efficiencies at high speeds below sonic velocity are certain to be lower than is common at low speeds with the conventional propeller.
Date: June 1941
Creator: Williams, David T.
Item Type: Refine your search to only Report
open access

A study of the application of data on various types of flap to the design of fighter brakes

Description: Report presenting an approximate method of applying the available data on various types of flaps in the design of fighter brakes together with several examples of its use. The computed effects of flap type, size, location, and deflection as well as the effects of altitude and initial velocities on braking characteristics are also shown in some examples using the method to determine various flap arrangements.
Date: June 1942
Creator: Purser, Paul E.
Item Type: Refine your search to only Report
open access

Study of Turning Performance of a Fighter-Type Airplane Particularly as Affected by Flaps and Increased Supercharging, Special Report

Description: "Results of a study to determine the effects on turning performance due to various assumed modifications to a typical Naval fighter airplane are presented. The modifications considered included flaps of various types, both part and full space, increased supercharging, and increased wing loading. The calculations indicated that near the low-speed end of the speed range, the turning performance, as defined by steady level turns at a given speed, would be improved to some extent by any of the flap… more
Date: June 1942
Creator: Wetmore, J. W.
Item Type: Refine your search to only Report
open access

Wind-tunnel investigation of control-surface characteristics 19: a double flap with an overhang and an internal aerodynamic balance

Description: Report presenting wind-tunnel tests in two-dimensional flow to investigate the aerodynamic characteristics of a double flap with an internal and overhang balance. Three sizes of each type of balance were tested with three relative rates of deflection of the two flaps. Results regarding lift, hinge moment, drag, and pitching moment are provided.
Date: June 1944
Creator: Liddell, Robert B.
Item Type: Refine your search to only Report
open access

Wind Tunnel Tests of Ailerons at Various Speeds 1: Ailerons of 0.20 Airfoil Chord and True Contour With 0.35 Aileron-Chord Extreme Blunt Nose Balance on the NACA 66,2-216 Airfoil

Description: "Hinge-moment, lift, and pressure-distribution measurements were made in the two-dimensional test section of the NACA stability tunnel on a blunt-nose balance-type aileron on an NACA 66,2-216 airfoil at speeds up to 360 miles per hour corresponding to a Mach number of 0.475. The tests were made primarily to determine the effect of speed on the action of this type of aileron. The balance-nose radii of the aileron were varied from 0 to 0.02 of the airfoil chord and the gap width was varied from 0… more
Date: June 1943
Creator: Letko, W.; Denaci, H. G. & Freed, C.
Item Type: Refine your search to only Report
open access

Wind-tunnel tests of ailerons at various speeds 2: ailerons of 0.20 airfoil chord and true contour with 0.60 aileron-chord sealed internal balance on the NACA 66,2-216 airfoil

Description: Report presenting hinge-moment, lift, pressure difference across the balance, and pressure-distribution measurements in the two-dimensional test section of the stability tunnel on a 0.60 aileron-chord sealed internal-balance aileron on a specified NACA airfoil. The primary test objective was to determine the effect of speed on the action of the aileron.
Date: June 1943
Creator: Denaci, H. G. & Bird, J. D.
Item Type: Refine your search to only Report
Back to Top of Screen