UNT Libraries Government Documents Department - 812 Matching Results

Search Results

Results: 1 - 24 next
open access

Abnormal grain growth in M-252 and S-816 alloys

Description: Report discussing an experimental investigation was carried out on air- and vacuum-melted M-252 and S-816 alloys to find conditions of heating and hot-working which resulted in abnormal grain growth. The experiments were mainly limited to normal conditions of heating for hot-working and heat treatment and normal temperatures of solution treatment were used to allow grain growth after susceptibility to abnormal grain growth was developed by various experimental conditions. Results indicated that… more
Date: November 1957
Creator: Decker, R. F.; Rush, A. I.; Dano, A. G. & Freeman, J. W.
Item Type: Refine your search to only Report
open access

Abnormal grain growth in nickel-base heat-resistant alloys

Description: From Introduction: "The data included in this report for Nimonic 80A alloy, for instance, represent experiments carried out to help clarify a production problem of grain-size control in an alloy which has been extensively used. The general procedure of the investigation was to carry out controlled laboratory experiments on samples of bar stock to find conditions of heating and hot-working which resulted in abnormal grain growth."
Date: December 1957
Creator: Decker, R. F.; Rush, A. I.; Dano, A. G. & Freeman, J. W.
Item Type: Refine your search to only Report
open access

Additional Experiments With Flat-Top Wing- Body Combinations at High Supersonic Speeds

Description: Memorandum presenting an experimental study of the effects of several variations in configuration geometry on the aerodynamic characteristics of flat-top wing-body combinations. Generally, the configurations consist of one half of a body of revolution mounted beneath a wing of essentially arrow plan form. Results regarding the effect of trailing-edge sweep, effect of the addition of auxiliary bodies, effect of tip-flap deflection, effect of dihedral, effect of leading-edge sweep, effect of fuse… more
Date: February 19, 1957
Creator: Syvertson, Clarence A.; Wong, Thomas J. & Gloria, Hermilo R.
Item Type: Refine your search to only Report
open access

Aerodynamic and hydrodynamic characteristics of a proposed supersonic multijet water-based hydro-ski aircraft with a variable-incidence wing

Description: From Introduction: "The configuration described in this paper represents one approach to such an airplane and the results of the wind-tunnel and tank evaluations are presented. In the present investigation, the aerodynamic longitudinal characteristics over a Mach number range from 0.6 to 1.97 were obtained."
Date: October 23, 1957
Creator: Petynia, William W.; Hasson, Dennis F. & Spooner, Stanley H.
Item Type: Refine your search to only Report
open access

Aerodynamic characteristics at Mach number of 4.06 of a typical supersonic airplane model using body and vertical-tail wedges to improve directional stability

Description: Report presenting an investigation at Mach number 4.06 on a typical supersonic airplane model with a 40 degree sweptback wing. The purpose of the investigation was to determine the effectiveness of using wedges on the body and on the vertical tail to increase the static directional stability. Results regarding the longitudinal characteristics and lateral characteristics are provided.
Date: December 3, 1957
Creator: Dunning, Robert W.
Item Type: Refine your search to only Report
open access

Aerodynamic Characteristics of a 0.04956-Scale Model of the Convair TF-102A Airplane at Transonic Speeds, Coord. No. AF-120

Description: "The basic aerodynamic characteristics of a 0.04956-scale model of the Convair TF-102A airplane with controls undeflected have been determined at Mach numbers from 0.60 to 1.135 for angles of attack up to approximately 22 deg in the Langley 8-foot transonic tunnel. In addition, comparisons have been made with data obtained from a previous investigation of a 0.04956-scale model of the Convair F-102A airplane. The results indicated the TF-102A airplane was longitudinally stable for all conditions… more
Date: 1957~
Creator: Osborne, Robert S.
Item Type: Refine your search to only Report
open access

Aerodynamic Characteristics of a Circular Cylinder at Mach Number 6.86 and Angles of Attack Up to 90 Degrees

Description: "Pressure-distribution and force tests of a circular cylinder have been made in the Langley 11-inch hypersonic tunnel at a Mach number of 6.88, a Reynolds number of 129,000, and angles of attack up to 90 degrees. The results are compared with the hypersonic approximation of Grimminger, Williams, and Young and a simple modification of the Newtonian flow theory. An evaluation of the crossflow theory is made through comparison of present results with available crossflow Mach number drag coefficien… more
Date: January 1957
Creator: Penland, Jim A.
Item Type: Refine your search to only Report
open access

Aerodynamic Characteristics of a Model of an Escape Capsule for a Supersonic Bomber-Type Airplane at a Mach Number of 2.49

Description: Report discussing an investigation of the aerodynamic characteristics of a model of an escape capsule with and without stabilizing fins for a supersonic bomber-type airplane. Lift, drag, longitudinal and lateral stability characteristics, and photographs of the capsule model are presented.
Date: December 3, 1957
Creator: Presnell, John G., Jr.
Item Type: Refine your search to only Report
open access

Aerodynamic Characteristics of Missile Configurations With Wings of Low Aspect Ratio for Various Combinations of Forebodies, Afterbodies, and Nose Shapes for Combined Angles of Attack and Sideslip at a Mach Number of 2.01

Description: "An investigation has been made in the Langley 4-by-4-foot supersonic pressure tunnel to determine the aerodynamic characteristics of a series of missile configurations having low-aspect-ratio wings at a Mach number of 2.01. The effects of wing plan form and size, length-diameter ratio, forebody and afterbody length, boattailed and flared afterbodies, and component force and moment data are presented for combined angles of attack and sideslip to about 28 degrees. No analysis of the data was mad… more
Date: June 25, 1957
Creator: Robinson, Ross B.
Item Type: Refine your search to only Report
open access

Aerodynamic Forces and Moments on a Large Ogive-Cylinder Store at Various Locations Below the Fuselage Center Line of a Swept-Wing Bomber Configuration at a Mach Number of 1.61

Description: "A supersonic wind-tunnel investigation on store interference has been conducted in the Langley 4- by 4-foot supersonic pressure tunnel at a Mach number of 1.61. Forces and moments were measured on a large ogive-cylinder store in the presence of a 45 degree swept-wing-fuselage bomber configuration for a number of store locations below the fuselage center line. Results of the investigation show that large variations of store lift, drag, and pitch occur with changes in store or airplane angle of… more
Date: January 14, 1957
Creator: Morris, Odell A.
Item Type: Refine your search to only Report
open access

Aerodynamic Heating and Boundary-Layer Transition on a 1/10-Power Nose Shape in Free Flight at Mach Numbers Up to 6.7 and Free-Stream Reynolds Numbers Up To 16 x 10(Exp 6)

Description: Report presenting testing of a modified 1/10-power nose shape in free flight at Mach numbers up to 6.7. Measured heating rates were presented and compared with calculated values. Results regarding transition and comparison with previous investigations are provided.
Date: June 17, 1957
Creator: Garland, Benjamine J.; Swanson, Andrew G. & Speegle, Katherine C.
Item Type: Refine your search to only Report
open access

Aerodynamic heating of a thin, unswept, untapered, multiweb, aluminum-alloy wing at Mach numbers up to 2.67 as determined from a free-flight investigation of a rocket-propelled model

Description: From Introduction: "The heat-transfer data calculated from measured temperatures are compared with values calculated by the theory of Van Driest for a flat plate with laminar and turbulent boundary layers. In addition, the heat-transfer data from the flight tests are compared with data obtained from the Langley Structures Research Division of ground tests of an identical wing at a Mach number approximately equal to 1.99 in the pre-flight jet of the Langley Pilotless Aircraft Research Station a… more
Date: August 6, 1957
Creator: Strass, H. Kurt & Stephens, Emily W.
Item Type: Refine your search to only Report
open access

Aerodynamic interference of slender wing-tail combinations

Description: From Introduction: "In the present paper, the emphasis is placed on calculating the variations of total forces and moments with angles of attack and sideslip for a number of slender plane and cruciform wing-tail combinations and for some airplane-type arrangements of a plane wing and a horizontal and vertical tail."
Date: January 1957
Creator: Sacks, Alvin H.
Item Type: Refine your search to only Report
open access

Aerodynamic load distribution over a 45 degree swept wing having a spoiler-slot-deflector aileron and other spoiler ailerons for Mach numbers from 0.60 to 1.03

Description: Report discussing an investigation of a 45 degree swept-back-wing-body combination with flap spoiler ailerons, deflector ailerons, and a spoiler-slot-deflector aileron. The pressures were measured from Mach numbers 0.60 to 1.03 and at various angles of attack.
Date: December 5, 1957
Creator: West, F. E., Jr.; Whitcomb, Charles F. & Schmeer, James W.
Item Type: Refine your search to only Report
open access

Aerodynamic Loads on Tails at High Angles of Attack and Sideslip

Description: "Results are presented for the loads and moments acting on the individual tail surfaces of a body-tail combination over a wide range of angles of attack and sideslip. The effects of forebody length and panel-panel interference on the characteristics are included. It is shown that large nonlinear variations in these loads and moments, which occur at some combinations of angle of attack and sideslip, cannot be predicted by low-angle theory" (p. 1).
Date: July 23, 1957
Creator: Spahr, J. Richard & Polhamus, Edward C.
Item Type: Refine your search to only Report
open access

Aerodynamic Performance of Several Techniques for Spike-Position Control of a Blunt-Lip Nose Inlet Having Internal Contraction; Mach Numbers of 0.63 and 1.5 to 2.0

Description: Memorandum presenting a study to determine locations of pressure sensors for controlling the spike position of a blunt-lip, axisymmetric inlet with internal contraction. The inlet performance was determined at Mach numbers of 0.63 and 1.5 to 2.0 for airflow schedules corresponding to those of a given turbojet engine over a wide range of ambient temperatures. The use of the ratio of a throat static pressure to either a local total or the spike-tip total pressure provided a signal that could set … more
Date: September 17, 1957
Creator: Anderson, Arthur A. & Weinstein, Maynard I.
Item Type: Refine your search to only Report
open access

Aerodynamics of Oscillating Control Surfaces at Transonic Speeds

Description: Memorandum presenting a discussion of oscillating flap-type and all-movable controls with particular emphasis on the aerodynamic forces and moments at transonic speeds. Hinge-moment results from recent wind-tunnel and rocket-powered-model tests are summarized for trailing-edge flap-type controls to illustrate the effects of control hinge-line position and profile shape on one-degree-of-freedom flutter of this type of control.
Date: June 17, 1957
Creator: Thompson, Robert F. & Clevenson, Sherman A.
Item Type: Refine your search to only Report
open access

An Air-Borne Target Simulator for Use With Scope-Presentation Type Fire-Control Systems

Description: Report describing the design and flight evaluation of an air-borne target simulator using precomputed relative kinematics for use in tracking studies of fighter aircraft equipped with scope-presentation type fire-control systems. Testing occurred in an F86D airplane equipped with a Hughes E-4 fire-control system. Results regarding relative kinematic programming considerations and restrictions to system evaluation are provided.
Date: May 10, 1957
Creator: Foster, John V.; Fulcher, Elmer C. & Heinle, Donovan R.
Item Type: Refine your search to only Report
open access

Airplane Measurements of Atmospheric Turbulence for Altitudes Between 20,000 and 55,000 Feet Over the Western Part of the United States

Description: Report presenting a sample of data on atmospheric turbulence on Lockheed U-2 airplanes during research flights. The intensity, amount, and extent of atmospheric turbulence observed in the United States is in good agreement with data from England and Western Europe. Results regarding overall gust distribution, intensity of turbulence, percent of rough air, and size of turbulent areas are provided.
Date: August 23, 1957
Creator: Coleman, Thomas L. & Coe, Emilie C.
Item Type: Refine your search to only Report
open access

Altitude chamber evaluation of an aircraft liquid hydrogen fuel system used with a turbojet engine

Description: From Introduction: "The objective of this report are (1) to describe the complete fuel system, (2) to discuss the procedure used for transitions between JP-4 fuel and hydrogen, and (3) to present and discuss engine performance obtained with both fuels, and (4) to review the reliability of the fuel system."
Date: August 19, 1957
Creator: Braithwaite, Willis M.; Fenn, David B. & Algranti, Joseph S.
Item Type: Refine your search to only Report
open access

Altitude Free-Jet Investigation of Dynamics of a 28-Inch-Diameter Ram-Jet Engine

Description: From Introduction: "The feasibility of closed-loop control of ram-jet-engine thrust is demonstrated in references 1 and 2. The dynamic behavior of a 28-inch-diameter ram-jet engine designed to operate in Mach number range of 2.35 to 2.70 is evaluated herein."
Date: January 15, 1957
Creator: Wentworth, Carl B.; Dunbar, William R. & Crowl, Robert J.
Item Type: Refine your search to only Report
Back to Top of Screen