UNT Libraries Government Documents Department - 84 Matching Results

Search Results

300 Area D4 Project Fiscal Year 2008 Building Completion Report

Description: This report documents the deactivation, decontamination, decommissioning, and demolition (D4) of eighteen buildings in the 300 Area of the Hanford Site that were demolished in Fiscal Year 2008. The D4 of these facilties included characterization, engineering, removal of hazardous and radiologically contaminated materials, equipment removal, utility disconnection, deactivation, decontamination, demolition of the structure, and stabilization or removal of the remaining slab and foundation, as appropriate.
Date: January 15, 2009
Creator: Westberg, R. A.

Across-the-Board Rescissions in Appropriations Acts: Overview and Recent Practices

Description: This report provides information on the main components of across-the-board rescissions and recent practices since FY2008. The annual appropriations process reqires an agreement on the level of funding for individual items or accounts but also with regard to the total amount of discretionary budget authority that will be provided for that fiscal year. If that agreed-upon amount requires a reduction in budget authority and sufficient reductions are not associated with individual programs, an alternative method to reduce that amount is an "across-the-board rescission."
Date: September 2, 2015
Creator: Tollestrup, Jessica

Advanced Simulation and Computing FY08-09 Implementation Plan Volume 2 Revision 0

Description: The Stockpile Stewardship Program (SSP) is a single, highly integrated technical program for maintaining the safety and reliability of the U.S. nuclear stockpile. The SSP uses past nuclear test data along with current and future nonnuclear test data, computational modeling and simulation, and experimental facilities to advance understanding of nuclear weapons. It includes stockpile surveillance, experimental research, development and engineering programs, and an appropriately scaled production capability to support stockpile requirements. This integrated national program requires the continued use of current facilities and programs along with new experimental facilities and computational enhancements to support these programs. The Advanced Simulation and Computing Program (ASC) is a cornerstone of the SSP, providing simulation capabilities and computational resources to support the annual stockpile assessment and certification, to study advanced nuclear-weapons design and manufacturing processes, to analyze accident scenarios and weapons aging, and to provide the tools to enable Stockpile Life Extension Programs (SLEPs) and the resolution of Significant Finding Investigations (SFIs). This requires a balanced resource, including technical staff, hardware, simulation software, and computer science solutions. In its first decade, the ASC strategy focused on demonstrating simulation capabilities of unprecedented scale in three spatial dimensions. In its second decade, ASC is focused on increasing its predictive capabilities in a three-dimensional simulation environment while maintaining the support to the SSP. The program continues to improve its unique tools for solving progressively more difficult stockpile problems (focused on sufficient resolution, dimensionality and scientific details); to quantify critical margins and uncertainties (QMU); and to resolve increasingly difficult analyses needed for the SSP. Moreover, ASC has restructured its business model from one that was very successful in delivering an initial capability to one that is integrated and focused on requirements driven products that address long-standing technical questions related to enhanced predictive capability in the simulation tools. ASC ...
Date: April 25, 2007
Creator: McCoy, M; Kusnezov, D; Bikkel, T & Hopson, J

Advanced Simulation and Computing FY08-09 Implementation Plan, Volume 2, Revision 0.5

Description: The Stockpile Stewardship Program (SSP) is a single, highly integrated technical program for maintaining the surety and reliability of the U.S. nuclear stockpile. The SSP uses past nuclear test data along with current and future non-nuclear test data, computational modeling and simulation, and experimental facilities to advance understanding of nuclear weapons. It includes stockpile surveillance, experimental research, development and engineering programs, and an appropriately scaled production capability to support stockpile requirements. This integrated national program requires the continued use of current facilities and programs along with new experimental facilities and computational enhancements to support these programs. The Advanced Simulation and Computing Program (ASC)1 is a cornerstone of the SSP, providing simulation capabilities and computational resources to support the annual stockpile assessment and certification, to study advanced nuclear-weapons design and manufacturing processes, to analyze accident scenarios and weapons aging, and to provide the tools to enable Stockpile Life Extension Programs (SLEPs) and the resolution of Significant Finding Investigations (SFIs). This requires a balanced resource, including technical staff, hardware, simulation software, and computer science solutions. In its first decade, the ASC strategy focused on demonstrating simulation capabilities of unprecedented scale in three spatial dimensions. In its second decade, ASC is focused on increasing its predictive capabilities in a three-dimensional simulation environment while maintaining the support to the SSP. The program continues to improve its unique tools for solving progressively more difficult stockpile problems (focused on sufficient resolution, dimensionality and scientific details); to quantify critical margins and uncertainties (QMU); and to resolve increasingly difficult analyses needed for the SSP. Moreover, ASC has restructured its business model from one that was very successful in delivering an initial capability to one that is integrated and focused on requirements-driven products that address long-standing technical questions related to enhanced predictive capability in the simulation tools. ASC must ...
Date: September 13, 2007
Creator: Kusnezov, D; Bickel, T; McCoy, M & Hopson, J

Aging and Phase Stability Studies of Alloy 22 FY08 Final Report

Description: This report is a compilation of work done over the past ten years in support of phase stability studies of Alloy 22 for the Yucca Mountain Project and contains information previously published, reported, and referenced. Most sections are paraphrased here for the convenience of readers. Evaluation of the fabrication processes involved in the manufacture of waste containers is important as these processes can have an effect on the metallurgical structure of an alloy. Because material properties such as strength, toughness, aging kinetics and corrosion resistance are all dependent on the microstructure, it is important that prototypes be built and evaluated for processing effects on the performance of the material. Of particular importance are welds, which have an as-cast microstructure with chemical segregation and precipitation of complex phases resulting from the welding process. The work summarized in this report contains information on the effects of fabrication processes such as solution annealing, stress mitigation, heat-to-heat variability, and welding on the kinetics of precipitation, mechanical, and corrosion properties. For a waste package lifetime of thousands of years, it is impossible to test directly in the laboratory the behavior of Alloy 22 under expected repository conditions. The changes that may occur in these materials must be accelerated. For phase stability studies, this is achieved by accelerating the phase transformations by increasing test temperatures above those anticipated in the proposed repository. For these reasons, Alloy 22 characterization specimens were aged at Lawrence Livermore National Laboratory (LLNL) Aging Facilities for times from 1 hour up to 8 years at temperatures ranging from 200-750 C. These data as well as the data from specimens aged at 260 C, 343 C, and 427 C for 100,028 hours at Haynes International will be used for performance confirmation and model validation.
Date: April 3, 2008
Creator: Torres, S G

Annual Hanford Seismic Report for Fiscal Year 2008

Description: The Hanford Seismic Assessment Program (HSAP) provides an uninterrupted collection of high-quality raw and processed seismic data from the Hanford Seismic Network for the U.S. Department of Energy and its contractors. The HSAP is responsible for locating and identifying sources of seismic activity and monitoring changes in the historical pattern of seismic activity at the Hanford Site. The data are compiled, archived, and published for use by the Hanford Site for waste management, natural phenomena hazards assessments, and engineering design and construction. In addition, the HSAP works with the Hanford Site Emergency Services Organization to provide assistance in the event of a significant earthquake on the Hanford Site. The Hanford Seismic Network and the Eastern Washington Regional Network consist of 44 individual sensor sites and 15 radio relay sites maintained by the Hanford Seismic Assessment Team. During fiscal year 2008, the Hanford Seismic Network recorded 1431 triggers on the seismometer system, which included 112 seismic events in the southeast Washington area and an additional 422 regional and teleseismic events. There were 74 events determined to be local earthquakes relevant to the Hanford Site. The highest-magnitude event (3.7 Mc) occurred on May 18, 2008, and was located approximately 17 km east of Prosser at a depth of 20.5 km. With regard to the depth distribution, 13 earthquakes were located at shallow depths (less than 4 km, most likely in the Columbia River basalts), 45 earthquakes were located at intermediate depths (between 4 and 9 km, most likely in the pre-basalt sediments), and 16 earthquakes were located at depths greater than 9 km, within the crystalline basement. Geographically, 54 earthquakes were located in swarm areas and 20 earthquakes were classified as random events. The May 18 earthquake was the highest magnitude event recorded since 1975 in the vicinity of the Hanford Site ...
Date: December 29, 2008
Creator: Rohay, Alan C.; Sweeney, Mark D.; Hartshorn, Donald C.; Clayton, Ray E. & Devary, Joseph L.

The Bureau of Alcohol, Tobacco, Firearms and Explosives (ATF): Budget and Operations for FY2008, FY2009, and FY2010

Description: This report provides an overview of the Bureau of Alcohol, Tobacco, Firearms and Explosives (ATF) budget and operations for FY2008, FY2009, and FY2010. It chronicles congressional action on the annual Commerce, Justice, Science (CJS), and Related Agencies Appropriations bills for those fiscal years, as well as action on supplemental and stimulus appropriations bills.
Date: April 15, 2010
Creator: Krouse, William J.

Calibration of an interfacial force microscope for MEMS metrology : FY08-09 activities.

Description: Progress in MEMS fabrication has enabled a wide variety of force and displacement sensing devices to be constructed. One device under intense development at Sandia is a passive shock switch, described elsewhere (Mitchell 2008). A goal of all MEMS devices, including the shock switch, is to achieve a high degree of reliability. This, in turn, requires systematic methods for validating device performance during each iteration of design. Once a design is finalized, suitable tools are needed to provide quality assurance for manufactured devices. To ensure device performance, measurements on these devices must be traceable to NIST standards. In addition, accurate metrology of MEMS components is needed to validate mechanical models that are used to design devices to accelerate development and meet emerging needs. Progress towards a NIST-traceable calibration method is described for a next-generation, 2D Interfacial Force Microscope (IFM) for applications in MEMS metrology and qualification. Discussed are the results of screening several suitable calibration methods and the known sources of uncertainty in each method.
Date: October 1, 2009
Creator: Houston, Jack E.; Baker, Michael Sean; Crowson, Douglas A.; Mitchell, John Anthony & Moore, Nathan W.

Community Development Block Grants: Funding Issues in the 113th Congress

Description: This report is a review of the Community Development Fund (CDF) account's funding history from FY2000 to FY2014, as well as current funding in FY2015. It includes a discussion of the three primary components of the CDF account: CDBG formula grants; CDBG-related set-asides and earmarks; and CDBG-linked supplemental and special appropriations.
Date: March 11, 2015
Creator: Boyd, Eugene

Defense Authorization and Appropriations Bills: FY1970-FY2017

Description: This report is a research aid that lists the Department of Defense (DOD) authorization bills (Table 1) and appropriations bills (Table 2) for FY1970-FY2017. This report includes all the pertinent information on the passage of these bills through the legislative process: bill numbers, report numbers, dates reported and passed, recorded vote numbers and vote tallies, dates of passage of the conference reports with their numbers and votes, vetoes, substitutions, dates of final passage, and public law numbers.
Date: January 18, 2017
Creator: DeBruyne, Nese F.

Defense: FY2008 Authorization and Appropriations

Description: This report is a guide to one of the regular appropriations bills that Congress considers each year. It is designed to supplement the information provided by the House and Senate Appropriations Subcommittees on Defense. For both defense authorization and appropriations, this report summarizes the status of the bills, their scope, major issues, funding levels, and related congressional activity.
Date: January 23, 2008
Creator: Towell, Pat; Daggett, Stephen & Belasco, Amy

Department of State and Foreign Operations Appropriations: A Fact Sheet on Legislation, FY1995-FY2015

Description: This report discusses the foreign affairs appropriations passed within the last 21 years; nearly all of them were passed within omnibus, consolidated, or full-year continuing resolutions, and usually after the start of the new fiscal year. Many foreign policy experts contend that stand-alone appropriation legislation would allow for a more rigorous debate on specific foreign policy activities. They also believe that the practice of delayed appropriations has constrained ongoing program operating levels and the ability to introduce or fund new programs that did not exist in the previous year's budget.
Date: March 24, 2015
Creator: Epstein, Susan B.

Design Study for a Low-Enriched Uranium Core for the High Flux Isotope Reactor, Annual Report for FY 2008

Description: This report documents progress made during FY 2008 in studies of converting the High Flux Isotope Reactor (HFIR) from highly enriched uranium (HEU) fuel to low-enriched uranium (LEU) fuel. Conversion from HEU to LEU will require a change in fuel form from uranium oxide to a uranium-molybdenum alloy. With axial and radial grading of the fuel foil and an increase in reactor power to 100 MW, calculations indicate that the HFIR can be operated with LEU fuel with no degradation in reactor performance from the current level. Results of selected benchmark studies imply that calculations of LEU performance are accurate. Scoping experiments with various manufacturing methods for forming the LEU alloy profile are presented.
Date: March 1, 2009
Creator: Primm, Trent; Chandler, David; Ilas, Germina; Miller, James Henry; Sease, John D & Jolly, Brian C

Earmarks Disclosed by Congress: FY2008-FY2010 Regular Appropriations Bills

Description: This report summarizes the earmarks disclosed for the 12 regular, annual appropriations bills for each of FY2008, FY2009, and FY2010 and analyzes the data without additions or deletions. For individual earmarks, the disclosures typically identify the federal agency, project name, amount, and requester. In some cases, other information also has been included, such as an account within an agency, or the purpose or location of the earmark.
Date: April 16, 2010
Creator: Vincent, Carol H. & Monke, Jim

Emergency Funding for Agriculture: A Brief History of Supplemental Appropriations, FY1989-FY2009

Description: This report provides a table which lists supplemental appropriations for Agriculture. From FY1989 through FY2009, 39 appropriations, authorization, or farm disaster acts added approximately $68.7 billion in supplemental funding for U.S. Department of Agriculture (USDA) programs (excluding the Forest Service, which is funded annually under the Interior appropriations bill). Approximately $50.2 billion, or just under three-fourths of the total amount, was provided within the last 10 years.
Date: January 20, 2010
Creator: Chite, Ralph M.