Search Results

open access

Bench-scale co-processing. Quarterly report No. 13, April 1, 1991--September 31, 1991

Description: The objective of this contract is to extend and optimize UOP`s single-stage, slurry-catalyzed co-processing scheme. The current task is to complete a long-term operability run using a 0.05 wt-% Mo-based catalyst at approximately 460{degrees}C. The objectives of this run are to demonstrate that high-severity conditions can be run for an extended period of time (at least one month) and to collect enough product sample to do a complete Hempel fractionation and detailed characterization of the individual naphtha, distillate, and VGO cuts. This information will be used to reevaluate the engineering design and product upgrading scheme that was developed under the first co-processing contract (DE-AC22-84PC70002). During the current two quarters, the long-term operability study was unsuccessfully attempted several times. This report discusses these attempts.
Date: February 19, 1992
Creator: Piasecki, C. A. & Gatsis, J. G.
open access

Bench-scale co-processing. Technical progress report No. 22, October 1, 1993--December 31, 1993

Description: The major objective of this contract is to establish a database for the optimization of the co-processing concept by improving the effectiveness of the co-processing catalyst system. Two major mechanisms for improving the catalyst system are to be investigated: employment of more effective catalysts and utilization of improved catalytic environments. This report covers the period of October 1, 1993 to December 31, 1993. During this period work on Subtask 3.2.2, Improvement in Catalytic Environment, was carried out and the bench-scale co-processing pilot plant was operated in the co-current mode with product recycle and increased catalyst concentration. The project objective was to achieve 90+ % conversion of the 510{degrees}C+ non-distillables at 2800 psig. Currently work is on-going in a stirred autoclave at the same catalyst concentration as that in the runs reported here, and the results of these autoclave runs will be summarized in Technical Progress Report No. 23.
Date: December 31, 1993
Creator: Duttlinger, M. L. M.; Commisaris, S. E.; Davis, L. A.; Yurek, R. W.; Gatsis, J. G.; Roemisch, R. et al.
Back to Top of Screen