UNT Libraries Government Documents Department - Browse

ABOUT BROWSE FEED

On The Steady-State Thermal Stresses in Cylindrical Fuel Pins Due to Axial Variations in Their Internal Heat-Generation Rate

Description: From Introduction: "Specifically, we shall be concerned with the case of a solid right circular cylinder of infinite axial extent, having a stress-free outer boundary, being cooled by a temperature-independent boundary conductance, and having an axial heat-generation rate of form shown in Fig. 1. The inclusion of a radial dependence proportional to I^0(r/L) is only a minor complication in solving the required heat-transfer problem and, for reference, has been included in the solution for the temperature field to be found in Section II below."
Date: December 1966
Creator: Valentin, Richard A.

Particle Accelerator Division Summary Report: April Through September 1960

Description: Report issued by the Argonne National Laboratory discussing a summary report of the Particle Accelerator Division. As stated in the summary, "this report outlines two methods applicable respectively to longhand and computer calculations" (p. 4). This report includes tables, illustrations, and photographs.
Date: 1960
Creator: Crewe, Albert V.; FitzPatrick, John P.; Foss, Martyn H. & Manson, David S.

Performance Characteristics of a Liquid Metal MHD Generator

Description: Report issued by the Argonne National Laboratory discussing the performance of magnetohydrodynamic generators. As stated in the abstract, "an experimental study was made of the performance characteristics of a liquid metal MHD generator utilizing single-phase sodium-potassium and two-phase sodium-potassium-nitrogen fluids. The purpose of this study was to compare the generator performance with theory for single-phase flow and to determine the effects of the introduction of the gaseous phase on the generator output and efficiency" (p. 9). This report includes tables, illustrations, and photographs.
Date: July 1964
Creator: Petrick, Michael & Lee, Kung-You

Physical Parameters in Synthoil Process, Quarterly Report: October-December 1975

Description: This work is being done in support of the development of processes for converting coal to liquid fuel of low sulfur content, suitable for use in power production. Most of the effort is intended to produce information applicable to the SYNTHOIL Process. In the SYNTHOIL Process for converting coal to a low-sulfur fuel oil, coal is liquefied and hydro-desulfurized in a turbulent-flow, catalytic packed-bed reactor. A slurry of coal in recycled oil is reacted with hydrogen at 450 degrees C and 2,000 to 4,000 psi in the presence of Co-MoSiO2-Al2O3 catalyst. The turbulent flow of fluid prevents the coal's mineral matter from settling and plugging the reactor. The gross liquid products are centrifuged to remove the unreacted solids. The centrifuged liquid product is a low-S, low-ash fuel. The following four tasks are included: (1) heat of reaction of hydrogen with coal slurries; (2) heat transfer coefficient; (3) additives to facilitate separation of solids from liquids; and (4) catalyst testing. These are now in the planning stage of development.
Date: 1976
Creator: Fischer, J.; Lo, R.; Nandi, S.; Fredrickson, D.; Bump, T. R.; Mulcahey, T. P. et al.

Pictorial Studies of Molecules 1: Molecular Orbital Density Comparisons of H2, Li2, B2, C2, N2, O2, and F2

Description: From Review of Theory: " In practice, a very close approximation to the molecular orbitals can be obtained in this way. Recent calculations of this type, utilizing analysis and computer programs developed by the author, have resulted in the determination of the molecular orbitals for a large number of diatomic molecules in the form of Eq. (2). These functions, which are thought to be very close to the Hartree-Fock (i.e., the molecular orbitals demanded by theory) result, were used in the pictorial calculations presented in this report."
Date: July 1965
Creator: Wahl, Arnold C.

Pressure-Pulse Propagation in Two-Phase One- and Two-Component Mixtures

Description: Report issued by the Argonne National Laboratory discussing the propagation velocity of pressure pulses in two-phase mixtures. As stated in the abstract, "in this study, a comprehensive analytical development of the propagation velocity of small pressure pulses is presented for bubble, annular, stratified, droplet, and slug-flow regimes. Particular attention is given to the influence of flow regime on the momentum transfer between phases" (p. 9). This report includes tables, illustrations, and a photograph.
Date: March 1971
Creator: Henry, R. E.; Grolmes, M. A. & Fauske, H. K.

The Process Equipment and Protective Enclosures Designed for the Fuel Fabrication Facility: Facility #350

Description: Report issued by the Argonne National Laboratory discussing the design and construction of equipment for reactor fuels. As stated in the summary, "the report describes the development, prototype construction, methods of testing, and leak detection of a modular hood design to be used in housing equipment and processes for the Argonne National Laboratory Fuel Fabrication Facility" (p. 9). This report includes tables, illustrations, and photographs.
Date: January 1956
Creator: Shuck, A. B. & Mayfield, R. M.

Progress Report on the Argonne-Oak Ridge Digital Computer

Description: Report issued by the Argonne National Laboratory discussing a progress report on the Argonne-Oak Ridge digital computer. This report is an interim report, whose primary value is that it has forced those engaged in the work to give concrete expression to what they have been doing and thinking about up to this point. This report includes tables, illustrations, and photographs.
Date: March 5, 1951
Creator: Birge, W. A.; Burdette, E. W.; Burks, A. W.; Chu, J. C.; Flanders, D. A.; Jacobsohn, D. H. et al.

Reactor Development Program Progress Report: September 1966

Description: Report issued by the Argonne National Laboratory discussing progress made within the Reactor Development Program for September, 1966. The report includes highlights of the different project activities including plutonium utilization, fast breeder reactors, general reactor technology, advanced systems research, and nuclear safety. This report includes tables, illustrations, and photographs.
Date: October 26, 1966
Creator: Adams, R. M. & Glassner, A.

A Report on Some Attempts to Cast Centrifugally Fuel Elements of Small Diameter

Description: Report issued by the Argonne national Laboratory discussing centrifugal casting of thin uranium plates. The applicability of the centrifugal casting technique to the production of multiple castings of fuel pins of small diameter and of thin fuel plates was investigated. This report includes tables, illustrations, and photographs.
Date: March 1961
Creator: Yaggee, F. L.