UNT Libraries Government Documents Department - 20 Matching Results

Search Results

Results: 1 - 20
open access

Creep of 2S-O Aluminum Sheet at 500 and 550 C

Description: Abstract: "Creep and creep-rupture tests were made on 25-O aluminum sheet at temperatures of 500 and 550 C. The estimated stresses that will produce 0.5 per cent deformation and rupture in 10,000 hours at 400, 450, 500, and 550 C (data at 400 and 450 C are from BMI-T-29, dated June 9, 1950) are presented."
Date: September 11, 1952
Creator: VanEcho, J. A.; Simmons, W. F. & Cross, H. C.
Item Type: Refine your search to only Report
open access

Differential Thermal-Expansion Effects on Brazed Joints

Description: Abstract: "Differential thermal-expansion effects in brazed joints involving Type 310 stainless steel and GE-62 brazing alloy were investigated. The work included dilation and modulus-of-elasticity measurements using homogenous cast specimens and observations on bimetallic cantilevers made of the two constituents. No anomalies were found, although there were irregularities in the expansion of the brazing alloy which were ascribed to a solubility phenomenon. The elastic modulus of the brazing al… more
Date: September 4, 1953
Creator: Saller, Henry A.; Baroody, Eugene Michael, 1914-1982; Deem, H. W.; Stacy, J. T. & Klebanow, H. L.
Item Type: Refine your search to only Report
open access

The Electrical Properties of Uranium Oxides

Description: From introduction: "The work described here was part of an integrated investigation of the fundamental properties of uranium oxides done for the Mallinckrodt Chemical Works. Electrical measurements were employed to characterize the oxides produced by various processes from different starting materials. The basic objective of the program was to determine those factors which affect the sintering characteristics of uranium dioxide."
Date: September 25, 1956
Creator: Willardson, Robert K.; Moody, Jerry W. & Goering, Harvey L.
Item Type: Refine your search to only Report
open access

Estimated Manufacturing Costs for the Recovery of Thorium and Uranium from Monazite Sand

Description: Abstract: "Costs have been estimated for the production of uranium and pure thorium from monasite concentrates by a process involving (1) reaction of monasite with caustic soda, (2) dissolution of the hydrous oxides in hydrochloric acid, (3) separation from the bulk of the rare earths by hydroxide precipitation of thorium and uranium, and (4) purification by solvent extraction."
Date: September 15, 1950
Creator: Calkins, G. D. & Filbert, R. B., Jr.
Item Type: Refine your search to only Report
open access

Final Report on Recovery of Thorium and Uranium From Monazite Sand : Volume 1

Description: Report describing a method for recovery of high yields of thorium and uranium from monazite sand concentrates. Monazite is decomposed into hydrous metal oxides, which are dissolved in an acid. The solution is then separated into a precipitate, which seperates from thorium and uranium. An alternate separation method is evaluated.
Date: September 15, 1950
Creator: Calkins, G. D.; Filbert, R. B., Jr.; Bearse, A. E. & Clegg, J. W.
Item Type: Refine your search to only Report
open access

GCRE Critical-Assembly Studies

Description: This report follows critical-assembly studies made to provide engineering and physics data to aid in developing the Gas Cooled Reactor Experiments.
Date: September 10, 1958
Creator: Dingee, David A.; Ballowe, William C.; Klingensmith, Raymond W.; Egen, R. A.; Jankowski, Francis J. & Chastain, Joel W.
Item Type: Refine your search to only Report
open access

High-Boron Steels for Reactor Shielding

Description: This report follows work performed to determine the effects of large boron additions on the fabricability and room-temperature tensile properties of various steels for reactor shielding.
Date: September 27, 1955
Creator: Saller, Henry A.; Stacy, John T. & Klebanow, Herbert L.
Item Type: Refine your search to only Report
open access

The Mechanical Properties of Beta-Quenched Uranium at Elevated Temperatures

Description: The creep strength and tensile properties-were determined in vacuum for beta-quenched, derby uranium. The stresses to produce a secondary creep rate of- 0.0001 per cent per hr at 100, 250, 400, and 500 deg C were 48,000, sile strengths were 114,500, 35,100, 11,100, and 8,500 psi at temperatares of 28, 300, 500, and 700 deg C, respectively. The creep and tensile strengths decrease quite rapidly with increasing temperature in the temperatare range 250 to 400 deg C.
Date: September 6, 1955
Creator: Shober, Frederic R.; Marsh, Lyle L. & Manning, G. K.
Item Type: Refine your search to only Report
open access

Mechanical Properties of Zirconium and Zirconium-Uranium Alloys Containing Tin

Description: Abstract: "The mechanical properties of a large number of zirconium alloys have been investigated. These alloys include zirconium-tin and zirconium-tin-uranium. Tensile tests have been run on these alloys at room temperature, 500 F, and 600 F. Hot-hardness data have been obtained from room temperature to 1600 F, with particular emphasis on the hot-rolling range. Creep tests and fatigue tests have been run on a number of zirconium-tin alloys at 500 F."
Date: September 29, 1952
Creator: Schwope, A. D.; Muehlenkamp, G. T. & Chubb, Walston
Item Type: Refine your search to only Report
open access

Mechanical Properties of Zirconium and Zirconium-Uranium Alloys Containing Tin

Description: Abstract: "The mechanical properties of a large number of zirconium alloys have been investigated. These alloys include zirconium-tin and zirconium-tin-uranium. Tensile tests have been run on these alloys at room temperature, 500 F, and 600 F. Hot-hardness data have been obtained from room temperature to 1600 F, with particular emphasis on the hot-rolling range. Creep tests and fatigue tests have been run on a number of zirconium-tin alloys at 500 F."
Date: September 29, 1952
Creator: Schwope, A. D.; Muehlenkamp, G. T. & Chubb, Walston
Item Type: Refine your search to only Report
open access

Plastic Deformation in Grooved Rolls

Description: This report covers a study of the deformation characteristics of uranium in grooved rolls. The study's purpose was to provide a basis for possible improvements in the uniformity of the rolled rod produced for the Hanford and Savannah River reactors.
Date: September 27, 1955
Creator: Saller, Henry A.; Keeler, John R. & Cuddy, Lee J.
Item Type: Refine your search to only Report
open access

Progress Report on Refining of MgX and Other Uranium-Bearing Materials

Description: From abstract: "Results are presented which suggest the possibility of satisfactorily extracting uranium from pitchblende feeds with neutral ether, without the necessity of removing sulfate, by the addition of a sufficient quantity of iron to the feed." Other factors' effects on extraction were tested and arsenic was traced throughout extraction.
Date: September 30, 1951
Creator: Ewing, R. A.; Kiehl, S. J., Jr.; Bearse, A. E. & Sharpe, R. E.
Item Type: Refine your search to only Report
open access

Zirconium Pilot Plant Research and Development Progress Report

Description: The following progress report was compiled by the research and development division of the zirconium pilot plant. This report discusses two iodination and deposition runs that were completed as of August 20, 1951, as well as the third iodination run that uses a vaporizer condenser that condenses approximately 40 pounds of zirconium iodide.
Date: September 20, 1951
Creator: Accountius, O. E.; Black, D. G.; Dryden, C. E.; Finney, B. C.; Gruber, B. A.; Jurevic, W. G. et al.
Item Type: Refine your search to only Report
Back to Top of Screen