UNT Libraries Government Documents Department - 18 Matching Results

Search Results

Results: 1 - 18
open access

Transient effects of the wing wake on the horizontal tail

Description: "An investigation was made of the effect of the wing wake on the lift of the horizontal tail surfaces. In the development of expressions for this effect, the growth of wing circulation and wing wake, the time interval represented by the tail length, and the development of lift by the rail were considered. The theory has been applied to a specific case to show the magnitude of the effect to be expected. It is shown that, for motions below a certain frequency, the development of lift by the tail … more
Date: August 1940
Creator: Jones, Robert T. & Fehlner, Leo F.
Item Type: Refine your search to only Report
open access

Analysis of Cylinder-Pressure-Indicator Diagrams Showing Effects of Mixture Strength and Spark Timing

Description: "An investigation was made to determine the effect of mixture strength and of normal as well as optimum spark timing on the combustion, on the cylinder temperature, and on the performance characteristics of an engine. A single-cylinder test unit utilizing an air-cooled cylinder and a carburetor and operating with gasoline having an octane rating of 92 was used. The investigation covered a range of fuel-air ratios from 0.053 to 0.118. Indicator diagrams and engine-performance data were taken for… more
Date: August 1940
Creator: Gerrish, Harold C. & Voss, Fred
Item Type: Refine your search to only Report
open access

High-speed drag tests of several fuselage shapes in combination with a wing

Description: Drag testing was conducted in the high-speed wind tunnel of 23 conditions combining six streamline shapes and three conventional cowling-fuselage bodies. All of the models were tested in combination with a wing in order to include wing-fuselage interference effects. The critical speeds of combinations tested were, in general, determined by the wing-fuselage juncture.
Date: August 1940
Creator: Draley, Eugene C.
Item Type: Refine your search to only Report
open access

Heat-Transfer Tests of Two Steel Cylinder Barrels With Aluminum Fins Manufactured by Factory Production Method

Description: Report presenting testing of two engine cylinder barrels with aluminum fins. The primary purpose was to determine the heat-transfer coefficients and the excellence of the bonds between the aluminum fins and the aluminum base and between the aluminum base and the steel of the two barrels when manufactured by a large-volume production method.
Date: August 1940
Creator: Ellerbrock, Herman H., Jr.
Item Type: Refine your search to only Report
open access

Investigation of the Characteristics of a High-Aspect-Ratio Wing in the Langley 8-Foot High-Speed Tunnel

Description: "An investigation of the characteristics of a wing with an aspect ratio of 9.0 and an NACA 65-210 airfoil section has been made at Mach number up to 0.925. The wing tested has a taper ratio of 2.5:1.0, no twist, dihedral, or sweepback, and 20-percent - chord 37.5-percent-semispan plain ailerons. The results showed that serious changes in the normal-force characteristics occurred when the Mach number was increased above 0.74 at angles of attack between 4 deg. and 10 deg. and above 0.80 at 0 deg.… more
Date: August 28, 1940
Creator: Whitcomb, Richard T.
Item Type: Refine your search to only Report
open access

The Maximum Delivery Pressure of Single-Stage Radial Superchargers for Aircraft Engines

Description: With the aid of simple considerations and test results, an attempt is made to clear up some obscure points that still exist. The considerations are restricted to those cases where it is in fact of advantage to"force" the large delivery heads required for high altitude and high supercharge with a single-stage supercharger.
Date: August 1940
Creator: von der Nüll, W.
Item Type: Refine your search to only Report
open access

The Effects of Aerodynamic Heating on Ice Formations on Airplane Propellers

Description: An investigation has been made of the effect of aerodynamic heating on propeller-blade temperatures. The blade temperature rise resulting from aerodynamic heating was measured and the relation between the resulting blade temperatures and the outer limit of the iced-over region was examined. It was found that the outermost station at which ice formed on a propeller blade was determined by the blade temperature rise resulting from the aerodynamic heating at that point.
Date: August 1940
Creator: Rodert, Lewis A.
Item Type: Refine your search to only Report
open access

Full-Scale Tests of 4- and 6-Blade, Single- and Dual-Rotating Propellers, Special Report

Description: "Test of 10-foot diameter, 4- and 6-blade single- and dual-rotating propellers were conducted in the 20-foot propeller-research tunnel. The propellers were mounted at the front end of a streamline body incorporating spinners to house the hub portions. The effect of a symmetrical wing mounted in the slipstream was investigated. The blade angles investigated ranged from 20 degrees to 65 degrees; the latter setting corresponds to airplane speeds of over 500 miles per hour" (p. 1).
Date: August 1940
Creator: Biermann, David & Hartman, Edwin P.
Item Type: Refine your search to only Report
open access

Wind-tunnel investigation of effect of interference on lateral-stability characteristics of four NACA 23012 wings, an elliptical and a circular fuselage and vertical fins

Description: Report presents the results of a wind-tunnel investigation of the effect of wing-fuselage interference on lateral-stability characteristics made in the NACA 7 by 10-foot wind tunnel on four fuselages and two fins, representing high-wing, low-wing, and midwing monoplanes. The fuselages are of circular and elliptical cross section. The wings have rounded tips and, in plan form, one is rectangular and the three are tapered 3:1 with various amounts of sweep. The rate of change in the coefficients o… more
Date: August 8, 1940
Creator: House, Rufus O. & Wallace, Arthur R.
Item Type: Refine your search to only Report
open access

Wind-Tunnel Investigation of Spoiler, Deflector, and Slot Lateral-Control Devices on Wings With Full-Span Split and Slotted Flaps

Description: Report presents the results of an extensive investigation made in the NACA 7 by 10-foot wind tunnel of spoiler, deflector, and slot types of lateral-control device on wings with full-span split and slotted flaps. The static rolling and yawing moments were determined for all the devices tested, and the static hinge moments and the time response were determined for a few devices of each type.
Date: August 13, 1940
Creator: Wenzinger, Carl J. & Rogallo, Francis M.
Item Type: Refine your search to only Report
open access

Stemming in Metal Mines. Progress Report 2

Description: Report issued by the U.S. Bureau of Mines on the progress made in metal-mine stemming. Different types of stemming methods and testing procedures are presented. This report includes tables, illustrations, and photographs.
Date: August 1940
Creator: Johnson, John A.; Agnew, Wing G. & Mosier, McHenry
Item Type: Refine your search to only Report
open access

An Autunite Deposit in the Rosamond Hills, Kern County, California

Description: From introduction: An autunite deposit in the SW 1/4 sec. 25, T. 10 N., R. 13 W. San Bernardino meridian, was visited by F. M. Chace on May 6 and 15, 1950. The deposit is about 100 yards west of a north-south country road and is at an altitude of approximately 2,775 feet. The autunite-bearing tuffaceous sandstone strikes N. 35-40 W. and dips 20 -25 SW. It has been traced about 40 feet along the strike at the base of the outcrop and for about 20 feet up the dip. Insufficient work was done to giv… more
Date: August 1940
Creator: Chace, F. M.
Item Type: Refine your search to only Report
Back to Top of Screen