UNT Libraries Government Documents Department - 7,531 Matching Results

Search Results

open access

1/6TH SCALE STRIP EFFLUENT FEED TANK-MIXING RESULTS USING MCU SOLVENT

Description: The purpose of this task was to determine if mixing was an issue for the entrainment and dispersion of the Modular Caustic Side Solvent Extraction (CSSX) Unit (MCU) solvent in the Defense Waste Processing Facility (DWPF) Strip Effluent Feed Tank (SEFT). The MCU strip effluent stream containing the Cs removed during salt processing will be transferred to the DWPF for immobilization in HLW glass. In lab-scale DWPF chemical process cell testing, mixing of the solvent in the dilute nitric acid solution proved problematic, and the Savannah River National Laboratory (SRNL) was requested to perform scaled SEFT mixing tests to evaluate whether the problem was symptomatic of the lab-scale set-up or of the solvent. The solvent levels tested were 228 and 235 ppm, which represented levels near the estimated DWPF solvent limit of 239 ppm in 0.001M HNO{sub 3} solution. The 239 ppm limit was calculated by Norato in X-CLC-S-00141. The general approach for the mixing investigation was to: (1) Investigate the use of fluorescent dyes to aid in observing the mixing behavior. Evaluate and compare the physical properties of the fluorescent dyed MCU solvents to the baseline Oak Ridge CSSX solvent. Based on the data, use the dyed MCU solvent that best approximates the physical properties. (2) Use approximately a 1/6th linear scale of the SEFT to replicate the internal configuration for DWPF mixing. (3) Determine agitator speed(s) for scaled testing based on the DWPF SEFT mixing speed. (4) Perform mixing tests using the 1/6th SEFT and determine any mixing issues (entrainment/dispersion, accumulation, adhesion) through visual observations and by pulling samples to assess uniformity. The mixing tests used MCU solvent fabricated at SRNL blended with Risk Reactor DFSB-K43 fluorescent dye. This dyed SRNL MCU solvent had equivalent physical properties important to mixing as compared to the Oak Ridge baseline solvent, …
Date: February 1, 2006
Creator: Hansen, E.
open access

1+ -n+ ECR Ion Source Development Test Stand

Description: A test stand for the investigation of 1+-n+ charge boosting using an ECR ion sources is currently being assembled at the Texas A&M Cyclotron Institute. The ultimate goal is to relate the charge-boosting of ions of stable species to possible charge-boosting of ions of radioactive species extracted from the diverse, low-charge-state ion sources developed for radioactive ion beams.
Date: April 7, 2006
Creator: May, Donald P.
open access

3.1.1.2 Feed Processing and Handling DL2 Final Report

Description: This milestone report is the deliverable for our Feed Processing and Handling project. It includes results of wet biomass feedstock analysis, slurry pumping information, fungal processing to produce a lignin-rich biorefinery residue and two subcontracted efforts to quantify the amount of wet biomass feedstocks currently available within the corn processing and paper processing industries.
Date: September 30, 2006
Creator: Elliott, Douglas C.; Magnuson, Jon K. & Wend, Christopher F.
open access

4-D High-Resolution Seismic Reflection Monitoring of Miscible CO2 Injected into a Carbonate Reservoir

Description: The objective of this research project is to acquire, process, and interpret multiple high-resolution 3-D compressional wave and 2-D, 2-C shear wave seismic data in an attempt to observe changes in fluid characteristics in an oil field before, during, and after the miscible carbon dioxide (CO{sub 2}) flood that began around December 1, 2003, as part of the DOE-sponsored Class Revisit Project (DOE DE-AC26-00BC15124). Unique and key to this imaging activity is the high-resolution nature of the seismic data, minimal deployment design, and the temporal sampling throughout the flood. The 900-m-deep test reservoir is located in central Kansas oomoldic limestones of the Lansing-Kansas City Group, deposited on a shallow marine shelf in Pennsylvanian time. After 30 months of seismic monitoring, one baseline and eight monitor surveys clearly detected changes that appear consistent with movement of CO{sub 2} as modeled with fluid simulators and observed in production data.
Date: August 31, 2006
Creator: Miller, Richard D.; Raef, Abdelmoneam E.; Byrnes, Alan P. & Harrison, William E.
open access

9/11 Commission Recommendations: Implementation Status

Description: From Introduction: "This report provides a review of the 9/11 Commission recommendations and the status of their implementation at the end of the 109th Congress. The discussions herein are organized on the basis of policy themes that are core of the 9/11 Commission's recommendations, rather than a review of every numbered item set out in the Commission's final report."
Date: December 4, 2006
Creator: Grimmett, Richard F.
open access

10 kW SOFC Power System Commercialization

Description: Cummins Power Generation (CPG) as the prime contractor and SOFCo-EFS Holdings LLC (SOFCo), as their subcontractor, teamed under the Solid-state Energy Conversion Alliance (SECA) program to develop 3-10kW solid oxide fuel cell systems for use in recreational vehicles, commercial work trucks and stand-by telecommunications applications. The program goal is demonstration of power systems that meet commercial performance requirements and can be produced in volume at a cost of $400/kW. This report summarizes the team's activities during the seventh six-month period (July-December 2005) of the four-year Phase I effort. While there has been significant progress in the development of the SOFC subsystems that can support meeting the program Phase 1 goals, the SOFCo ceramic stack technology has progressed significantly slower than plan and CPG consider it unlikely that the systemic problems encountered will be overcome in the near term. SOFCo has struggled with a series of problems associated with inconsistent manufacturing, inadequate cell performance, and the achievement of consistent, durable, low resistance inter-cell connections with reduced or no precious materials. A myriad of factors have contributed to these problems, but the fact remains that progress has not kept pace with the SECA program. A contributing factor in SOFCo's technical difficulties is attributed to their significantly below plan industry cost share spending over the last four years. This has resulted in a much smaller SOFC stack development program, has contributed to SOFCo not being able to aggressively resolve core issues, and clouds their ability to continue into a commercialization phase. In view of this situation, CPG has conducted an independent assessment of the state-of-the-art in planar SOFC's stacks and have concluded that alternative technology exists offering the specific performance, durability, and low cost needed to meet the SECA objectives. We have further concluded that there is insufficient evidence to reliably predict that …
Date: February 1, 2006
Creator: Norrick, Dan; Palmer, Brad; Vesely, Charles; Barringer, Eric; Budge, John; DeBellis, Cris et al.
open access

20-MW Magnicon for ILC

Description: The 1.3 GHz RF power to drive ILC is now planned to be supplied by 600-1200, 10-MW peak power multi-beam klystrons. In this project, a conceptual design for 1.3 GHz magnicons with 20 MW peak power was developed as an alternative to the klystrons, with the possibility of cutting in half the numbers of high-power tubes and associated components. Design of a conventional magnicon is described, using TM110 modes in all cavities, as well as design of a modified magnicon with a TE111 mode output cavity. The latter has the advantage of much lower surface fields than the TM110 mode, with no loss of output power or electronic efficiency.
Date: November 29, 2006
Creator: Hirshfield, Jay L.
open access

A 50-100 kWe gas-cooled reactor for use on Mars.

Description: In the space exploration field there is a general consensus that nuclear reactor powered systems will be extremely desirable for future missions to the outer solar system. Solar systems suffer from the decreasing intensity of solar radiation and relatively low power density. Radioisotope Thermoelectric Generators are limited to generating a few kilowatts electric (kWe). Chemical systems are short-lived due to prodigious fuel use. A well designed 50-100 kWe nuclear reactor power system would provide sufficient power for a variety of long term missions. This thesis will present basic work done on a 50-100 kWe reactor power system that has a reasonable lifespan and would function in an extraterrestrial environment. The system will use a Gas-Cooled Reactor that is directly coupled to a Closed Brayton Cycle (GCR-CBC) power system. Also included will be some variations on the primary design and their effects on the characteristics of the primary design. This thesis also presents a variety of neutronics related calculations, an examination of the reactor's thermal characteristics, feasibility for use in an extraterrestrial environment, and the reactor's safety characteristics in several accident scenarios. While there has been past work for space reactors, the challenges introduced by thin atmospheres like those on Mars have rarely been considered.
Date: April 1, 2006
Creator: Peters, Curtis D. (.)
open access

81.114- University Reactor Infrastructure and Education Support / Prompt Gamma-ray Activation Analysis of Lithioum Ion Battery Cathodes

Description: This project focuses on the use of the Prompt Gamma-ray Activation Analysis (PGAA) technique available at the Nuclear Engineering Teaching Laboratory of the University of Texas at Austin to precisely determine the hydrogen (proton) contents in layered oxide cathode samples obtained by chemical lithium extraction in order to obtain a better understanding of the factors limiting the practical capacities and overall performance of lithium ion battery cathodes. The project takes careful precautionary experimental measures to avoid proton contamination both from solvents used in chemical delithiation and from ambient moisture. The results obtained from PGAA are complemented by the data obtained from other techniques such as thermogravimetric analysis, redox titration, atomic absorption spectroscopy, X-ray diffraction, and mass spectroscopic analysis of the evolved gas on heating. The research results broaden our understanding of the structure-property-performance relationships of lithium ion battery cathodes and could aid the design and development of new better performing lithium ion batteries for consumer (portable and electric vehicles), military, and space applications.
Date: November 11, 2006
Creator: Manthiram, Arumugam & Landsberger, S.
open access

100 Area and 300 Area Component of the RCBRA Fall 2005 Data Compilation

Description: The purpose of this report is to provide a brief description of the sampling approaches, a description of the samples collected, and the results for the Fall 2005 sampling event. This report presents the methods and results of the work to support the 100 Area and 300 Area Component of the River Corridor Baseline Risk Assessment.
Date: May 30, 2006
Creator: Queen, J.M.
open access

183-GHz Radiometer Handbook - November 2006

Description: The G-Band Vapor Radiometer (GVR) provides time-series measurements of brightness temperatures from four double sideband channels centered at ± 1, ± 3, ± 7, and ± 14 GHz around the 183.31-GHz water vapor line. Atmospheric emission in this spectral region is primarily due to water vapor, with some influence from liquid water. The 183.31 ± 14-GHz channel is particularly sensitive to the presence of liquid water. The sensitivity to water vapor of the 183.31-GHz line is approximately 30 times higher than at the frequencies of the two-channel microwave radiometer (MWR) for a precipitable water vapor (PWV) amount of less than 2.5 mm. Measurements from this nstrument are therefore especially useful during low-humidity conditions (PWV < 5 mm).
Date: November 30, 2006
Creator: Cadeddu, M. P.
open access

300 Area D4 Project 1st Quarter Fiscal Year 2006 Building Completion Report

Description: This report documents the deactivation, decontamination, decommissioning, and demolition of the MO-052, 3225, 334, 334A, and 334-TF Buildings in the 300 Area of the Hanford Site. The D4 of these facilities included characterization, engineering, removal of hazardous and radiologically contaminated materials, equipment removal, utility disconnection, deactivation, decontamination, demolition of the structure, and stabilization or removal of the remaining slab and foundation as appropriate.
Date: April 20, 2006
Creator: Smith, David S.
open access

300 Area D4 Project 2nd Quarter FY06 Building Completion Report

Description: This report documents the deactivation, decontamination, decommissioning, and demolition of 16 buildings in the 300 Area of the Hanford Site. The D4 of these facilities included characterization, engineering, removal of hazardous and radiologically contaminated materials, equipment removal, utility disconnection, deactivation, decontamination, demolition of the structure, and stabilization or removal of the remaining slab and foundation as appropriate.
Date: June 26, 2006
Creator: Smith, David S.
open access

300 Area D4 Project 3rd Quarter Fiscal Year 2006 Building Completion Report

Description: This report documents the deactivation, decontamination, decommissioning, and demolition of five buildings in the 300 Area of the Hanford Site. The D4 of these facilities included characterization, engineering, removal of hazardous and radiologically contaminated materials, equipment removal, utility disconnection, deactivation, decontamination, demolition of the structure, and stabilization or removal of the remaining slab and foundation as appropriate.
Date: September 25, 2006
Creator: Smith, D. S.
open access

317/319 phytoremediation site monitoring report - 2005 growing season.

Description: In 1999, Argonne National Laboratory (ANL) designed and installed a series of engineered plantings consisting of a vegetative cover system and approximately 800 hybrid poplars and willows rooting at various predetermined depths. The plants were installed using various methods including Applied Natural Science's TreeWell{reg_sign} system. The goal of the installation was to protect downgradient surface and groundwater by hydraulic control of the contaminated plume by intercepting the contaminated groundwater with the tree roots, removing moisture from the upgradient soil area, reducing water infiltration, preventing soil erosion, degrading and/or transpiring the residual volatile organic compounds (VOCs), and removing tritium from the subsoil and groundwater. This report presents the results of the monitoring activities conducted by Argonne's Energy Systems Division (ES) in the growing season of 2005. Monitoring of the planted trees began soon after the trees were installed in 1999 and has been conducted every summer since then. As the trees grew and consolidated their growth into the contaminated soil and groundwater, their exposure to the contaminants was progressively shown through tissue sampling. However, as trees grow larger, some of the findings obtained in the early years when trees were much smaller may not hold true now and need to be verified again. During the 2005 sampling campaign, data from the French Drain area confirmed the results obtained in 2004 and earlier, and the previously found correlation between soil and branch concentrations. During the 2005 summer, studies under controlled conditions (cartridges) have shown a generally linear dose response of PCE uptake, and have also shown that tree concentrations of PCE decrease after flushing with clean water in short times when trees are exposed to low levels of the contaminant. This data proves that tree concentrations are transient, and that with proper time levels can return close to background levels when exposure …
Date: March 31, 2006
Creator: Negri, M. C.; Gopalakrishnan, G. & Systems, Energy
open access

527 Political Organizations: Legislation in the 109th Congress

Description: The 109th Congress is examining the role of groups organized under section 527 of the Internal Revenue Code (IRC) that are involved in federal elections but are not operating under the requirements and restrictions of federal election law. Although such groups only recently emerged into public awareness, in 2004, they were widely seen as major players in the presidential election, with more than $400 million spent seeking to influence the outcome. Strictly speaking, the term “527” refers to a section of the Internal Revenue Code, which was added in 1975 to provide tax-exempt status to federal, state, and local political organizations, as defined in that statute. The controversy over these 527 groups arises from two factors: the different definitions used in federal election law and tax law as to what constitutes election-related activity and, further, the lack of certainty as to what election law itself regulates or may permissibly regulate. This report discusses these groups in detail, as well as related legislation.
Date: March 31, 2006
Creator: Cantor, Joseph E. & Lunder, Erika
open access

S. 852: The Fairness in Asbestos Injury Resolution Act of 2005

Description: This report provides an overview of S. 852, the Fairness in Asbestos Injury Resolution (FAIR) Act of 2005. The bill would establish the Office of Asbestos Disease Compensation to award damages to asbestos claimants from the Asbestos Injury Claims Resolution Fund.
Date: February 7, 2006
Creator: Cohen, Henry
open access

S. 852: The Fairness in Asbestos Injury Resolution Act of 2005

Description: From Summary: "This report provides an overview of S. 852, the Fairness in Asbestos Injury Resolution (FAIR) Act of 2005. The bill would largely remove asbestos claims from the courts in favor of the no-fault administrative process set out in the bill.
Date: September 20, 2006
Creator: Burrows, Vanessa K.
open access

100kW Energy Transfer Multiplexer Power Converter Prototype Development Project

Description: Project Final Report for "100kW Energy Transfer Multiplexer Power Converter Prototype Development Project" prepared under DOE grant number DE-FG36-03GO13138. This project relates to the further development and prototype construction/evaluation for the Energy Transfer Multiplexer (ETM) power converter topology concept. The ETM uses a series resonant link to transfer energy from any phase of a multiphase input to any phase of a multiphase output, converting any input voltage and frequency to any output voltage and frequency. The basic form of the ETM converter consists of an eight (8)-switch matrix (six phase power switches and two ground power switches) and a series L-C resonant circuit. Electronic control of the switches allows energy to be transferred in the proper amount from any phase to any other phase. Depending upon the final circuit application, the switches may be either SCRs or IGBTs. The inherent characteristics of the ETM converter include the following: Power processing in either direction (bidirectional); Large voltage gain without the need of low frequency magnetics; High efficiency independent of output load and frequency; Wide bandwidth with fast transient response and; Operation as a current source. The ETM is able to synthesize true sinusoidal waveforms with low harmonic distortions. For a low power PM wind generation system, the ETM has the following characteristics and advantages: It provides voltage gain without the need of low frequency magnetics (DC inductors) and; It has constant high efficiency independent of the load. The ETM converter can be implemented into a PM wind power system with smaller size, reduced weight and lower cost. As a result of our analyses, the ETM offers wind power generation technology for the reduction of the cost and size as well as the increase in performance of low power, low wind speed power generation. This project is the further theoretical/analytical exploration of …
Date: March 21, 2006
Creator: Skeist, S. Merrill; Baker, Richard H.; Marini, Anthony G. P. & Bennett, Keith
open access

1958-2006 Precipitation Climatology for Lawrence Livermore National Laboratory Livermore Site and Site 300

Description: This report contains rainfall climatology and analyses during the period from 1958 to 2006 for the two sites of Lawrence Livermore National Laboratory: the Livermore site and Site 300. The measurement sites are described, a regional climatology overview is provided, and the effect of topography on regional precipitation is discussed. Rainfall statistics are presented including monthly normals (30-year means) and medians; percentages of time that rainfall is less than or equal to specified amounts for given months, years, and seasons; and mean, median, and maximum numbers of days of precipitation for specified amounts by month, year, and season. The rainfall pattern is demonstrated to be typical of Mediterranean climates, with most rain falling during the cold season. Nearly 80% of seasonal rainfall occurs during November through March, with the average annual rainfall equaling 13.62 and 10.64 inches at the Livermore site and Site 300, respectively. Precipitation frequency and extreme value analyses for durations ranging from 15 minutes to 24 hours, month, and rainfall season are shown in order to estimate rainfall amounts for return periods of two to 100 years at both sites. This analysis determined 100-year return periods for largest 24-hour rainfalls of 2.49 and 2.22 inches at the Livermore site and Site 300, respectively. Historical analysis of seasonal rainfall data indicates that the wettest rainfall seasons at both sites typically occurred during strong El Ninos.
Date: December 19, 2006
Creator: Bowen, B M
open access

1996-2004 Trends in the Single-Family Housing Market: Spatial Analysis of the Residential Sector

Description: This report provides a detailed geographic analysis of two specific topics affecting the residential sector. First, we performed an analysis of new construction market trends using annual building permit data. We report summarized tables and national maps to help illustrate market conditions. Second, we performed a detailed geographic analysis of the housing finance market. We analyzed mortgage application data to provide citable statistics and detailed geographic summarization of the residential housing picture in the US for each year in the 1996-2004 period. The databases were linked to geographic information system tools to provide various map series detailing the results geographically. Looking at these results geographically may suggest potential new markets for TD programs addressing the residential sector that have not been considered previously. For example, we show which lenders affect which regions and which income or mortgage product classes. These results also highlight the issue of housing affordability. Energy efficiency R&D programs focused on developing new technology for the residential sector must be conscious of the costs of products resulting from research that will eventually impact the home owner or new home buyer. Results indicate that home values as a proportion of median family income in Building America communities are closely aligned with the national average of home value as a proportion of median income. Other key findings: • The share of home building and home buying activity continues to rise steadily in the Hot-Dry and Hot-Humid climate zones, while the Mixed-Humid and Cold climate zone shares continue to decline. Other zones remain relatively stable in terms of share of housing activity. • The proportion of home buyers having three times the median family income for their geography has been steadily increasing during the study period. • Growth in the Hispanic/Latino population and to a lesser degree in the Asian …
Date: September 5, 2006
Creator: Anderson, Dave M. & Elliott, Douglas B.
Back to Top of Screen