Search Results

open access

Hazards Report for SM-1 Core Temperature and Flow Instrumentation (Task XIV) Covering Special Test Procedures.

Description: Abstract: Test procedures for special tests involving in-core SM-1 temperature and flow instrumentation are described (Task XIV Package Tests). These tests involve in-core steady state flow and temperature measurements, loss of flow transients, load transients, reduced primary system pressure operations and reduced element flow. The thermal and hydraulic conditions prevailing in these tests, including steady state and transient burnout rations, are developed. The effects of reduced system pres… more
Date: February 28, 1962
Creator: Bradley, P. L. & Coombe, J. R.
open access

Hazards Report for SM-1 Core II With the SM-1 Core II With the Silver-Cadmium-Indium Control Rod Absorber Section

Description: Abstract: In the March-April 1962 shutdown of SM-1 Core II, the SM-28 element will be re-inserted in SM-1 Core II and an SM-1 Core I element will be removed. An SM-1 Core II europium absorber will be replaced by a Ag-Cd-In absorber, and surveillance specimens will be inserted above the core support structure. Analysis of these changes concludes that re-insertion of the SM-2B stationary element and insertion of surveillance specimens do not affect hazards potential previously defined for SM-1.… more
Date: March 15, 1962
Creator: Stephenson, L. D.
open access

Preliminary Technical Report SM-1 Core III with Type 3 Elements

Description: Abstract: This preliminary technical report covers design of the SM Type 3 element, its use .in.. SM-1 Core III, and planned use in the Type 3 Core for PM-2A. The Type:3 element characteristics are compared with Type 1 (SM-1 Core I) element nuclear, metallurgical, thermal and hydraulic characteristics and fabrication. The effect of using the Type 3 element in SM-1 Core III and. its planned use in a Type 3 Core for PM-2A is discussed with regard to operation, shielding, reactor safety and all co… more
Date: March 30, 1962
Creator: Inglima, J. N.; Beam, R. H.; Davidson, S. L. & Edgar, E. C.
open access

BWR Reference Design for PL-3

Description: Abstract: The natural circulation, direct cycle, boiling water reactor reference design presented in this technical report is the alternate to the preferred preliminary design developed under Phase I of the PL-3 contract. The report presents plant design criteria, summary of plant selection, plant description, reactor and primary system description, thermal and hydraulic analysis, nuclear analysis, control and instrumentation description, shielding description, auxiliary systems, power plant eq… more
Date: February 28, 1962
Creator: Humphries, G. E.
open access

PWR Preliminary Design for PL-3

Description: Abstract: The pressurized water reactor preliminary design presented in this volume is the preferred design developed under Phase I of the PL-3 contact. This technical report presents plant design criteria, summary of plant selection, plant description, reactor and primary system description, thermal and hydraulic analysis, nuclear analysis, control and instrumentation description, shielding description, auxiliary systems, power plant equipment, waste disposal, buildings and tunnels, services, … more
Date: February 28, 1962
Creator: Humphries, G. E.
open access

PL-3 Phase I Task 3 Research and Development Report

Description: Abstract: This technical report summarizes the results of research and development tasks performed during Phase I of this contract and presents recommendations for future development work. Work is reported in the areas of plant assembly and relocation, housings and footings, waste heat dissipation, instrumentation, refueling systems, waste disposal, shielding, core nuclear thermal and hydraulic studies, gaseous waste processing (BWR), and critical experiments on a 5 x 5 array of Type 3 fuel ele… more
Date: March 12, 1962
Creator: Humphries, G. E.
open access

Silver - Cadmium - Indium Absorber Development

Description: Abstract: This technical report covers development of an AG-Cd-In alternate absorber section for Army Type SM reactors. It describes the absorber material composition and the geometric configuration. It gives the nuclear and thermal analyses supporting this configuration and a detailed description of the manufacturing practice employed in fabricating the final design component.
Date: June 13, 1962
Creator: Shaw, R. A. & Harris, R. L.
open access

Power Distributions for Type 3 Replacement Cores for SM-1, SM-1A and PM-2A

Description: Abstract: The most adverse power distribution and power peaking factors have been developed for Type 3 replacement cores for SM-1, SM-1A, and PM-2A. Also included is the 37 element Type 3 core for SM-1, which is known as SM-1 Core III and is a prototype of a Type 3 core for PM-2A. The power distributions were compared with measured distributions obtained on type 3 fuel elements in SM-1, SM-1A and PM-2A core configurations. Using the measured data as a standard, correction factors were obtained … more
Date: July 25, 1962
Creator: Oggerino, J. P.
open access

Hazards Report for PM-2A Core II

Description: Abstract: This technical report describes the changes incurred in the PM-2A by the planned insertion of PM-2A Core II and the replacement of the startup and check sources. PM-2A Core II components were fabricated to specifications very nearly identical to those of PM-2A Core I. The essential difference in the cores is the boron loading which permits PM-2A Core II to meet a "one-stuck rod criteria" at beginning of life. This core has been subjected to a zero power experiment and loading procedur… more
Date: June 21, 1962
Creator: Coombe, John R. & Stephenson, L. D.
open access

Startup Testing of the PM-2A Nuclear Power Plant

Description: Abstract: A detailed description of the PM-2A reactor, primary system and instrumentation is presented. A general description of the secondary system and plant arrangement at Camp Century, Greenland is included. The results of the startup physics, shielding, thermal and hydraulics and radiochemistry test are presented. the analysis performed on the shielding and thermal and hydraulic tests is included. The shielding problem at startup and the shielding modification made to the plant are describ… more
Date: March 31, 1962
Creator: McCool, W. J.; Ryan, R. M.; Richards, W. M. S.; Bradley, P. L.; Stephenson, L. D. & Cox, J. F.
open access

Nuclear Measurements for Type 3 Replacement Cores for SM-1, SM-1A and PM-2A CE 3

Description: Abstract: This technical report contains the description and results of an experimental program to evaluate the effect of utilizing Type 3 (SM-2) replacement cores in existing Army field plants SM-1, SM-1A and PM-2A. This program, conducted at the Alco Products Critical Facility, employed SM-2 mockup fuel elements similar in composition to Type 3 fuel elements to determine start-up characteristics of Type 3 cores in SM-1, SM-1A and PM-2A core configurations. measurements include comprehensive … more
Date: January 11, 1962
Creator: Raby, T. M.; Walthousen, L. D.; Kemp, S. N.; McCool, W. J.; Sontheimer, K. C. & Robinson, R. A.
open access

SM-1 Reactor Vessel Closure Stud Investigation

Description: Abstract: This report presents metallurgical .analyses and corrosion tests conducted to determine :causes of failure of two SM- 1 reactor vessel studs due to fracture in the threaded areas, after 23 months' operation (March 1959). Conclusions of corrosion tests are: (1) failure of the studs was caused by stress corrosion cracking, (2) contributing factors to failure of the studs were improper control of heat treatment of the studs and absence of treatment for stress relief after thread grindin… more
Date: March 23, 1962
Creator: Reali, D. L.
open access

Shielding Measurements at the SM-1 Reactor : June 1961

Description: Abstract: Neutron flux and gamma radiation measurements through the SM-1 primary shield were made at the startup of Core II in June 1961. They extend previous measurements (APAE-35) both vertically and horizontally in the primary shield and in the rod drive pit. Dose rate measurements on spent fuel elements under water are also reported.
Date: March 16, 1962
Creator: Moote, F. G. & Obrist, C. H.
open access

SM-1 Shielding Analyses

Description: Abstract: This technical report analyzes gamma dose rate and neutron measurements in their relation to the SM-1 shield design and is a continuation of previous shielding measurements and analyses reported in APAE-35 and APAE-35 Supplement 2. The data reported herein are spent fuel element and rod drive pit gamma dose rates. An analysis of gamma dose rates off the core midplane is presented and compared with test data.
Date: June 20, 1962
Creator: Stephenson, L. D.
open access

Thermal Analysis of SM-1 Core III

Description: Abstract This technical report covers the thermal analysis performed on the SM-1 Core III for both steady state and transient conditions is reported. SM-1 Core III will be used as a test for Type 3 elements in a PM-2A Core. The steady state analysis indicated minimum departure from nucleate boiling ratios (DNBR) for both design and scram conditions above the minimum criteria of 1.5. Local nucleate boiling was noted in the hot internal channels and lattice passage at scram power conditions. Loss… more
Date: June 29, 1962
Creator: Davidson, S. L.
Back to Top of Screen