UNT Libraries Government Documents Department - 8,715 Matching Results

Search Results

1994 Activity Report, National Synchrotron Light Source. Annual report, October 1, 1993-September 30, 1994

Description: This report is a summary of activities carried out at the National Synchrotron Light Source during 1994. It consists of sections which summarize the work carried out in differing scientific disciplines, meetings and workshops, operations experience of the facility, projects undertaken for upgrades, administrative reports, and collections of abstracts and publications generated from work done at the facility.
Date: May 1995
Creator: Rothman, E. Z.

1994 INEL site-specific plan

Description: This report presents plans for environmental restoration and waste management activities at the Idaho National Engineering Laboratory for fiscal year 1994. This years`s plan focuses on issues affecting the Environmental Restoration and Waste Management Programs. The Environmental Restoration Program is concerned with all aspects of assessment and cleanup of inactive operations. It involves assessing and cleaning up (where necessary) inactive INEL waste areas that could release harmful substances into the environment, as well as safely managing surplus nuclear facilities. The Waste Management program involves treatment, storage, and disposal of radioactive, hazardous, mixed, and industrial waste by DOE activities. This program is designed to protect the safety of INEL employees, the public, and the environment in the design, construction, maintenance, and operation of INEL treatment, storage, and disposal facilities. It operates facilities in a cost-effective, environmentally sound, regulatory compliant, and publicly acceptable manner.
Date: May 1, 1994
Creator: Couch, B.

1994 Site Environmental Report

Description: The 1994 Site Environmental Report summarizes environmental activities at Lawrence Berkeley Laboratory (LBL) for the calendar year (CY) 1994. The report strives to present environmental data in a manner that characterizes the performance and compliance status of the Laboratory`s environmental management programs when measured against regulatory standards and DOE requirements. The report also discusses significant highlight and planning efforts of these programs. The format and content of the report are consistent with the requirements of the US Department of Energy (DOE) Order 5400.1, General Environmental Protection Program.
Date: May 1, 1995

1995 Bird survey Foothills parkway section 8B National Park Service, Tennessee

Description: The Foothills Parkway Section 8B right-of-way (ROW) is a stretch of land between Pittman Center and Cosby, Tennessee that is approximately 14.2 miles long and 1,000 ft wide, with a considerably wider section on Webb Mountain. A breeding bird survey was conducted at selected sample points along the ROW. The intent of the survey was to identify bird communities, area sensitive species (birds dependent on extensive forest systems for all their needs) and endangered, threatened, federal candidate, and state `in need of management` species now using the ROW. The survey also provides baseline data to assess future habitat impacts as well as cumulative impacts of the project.
Date: May 1, 1996
Creator: Wade, M. C.; Giffen, N. R. & Wade, B. A.

The 1997 NRC IST workshops and the status of questions and issues directed to the ASME O and M committee

Description: This paper describes the results of the four NRC Inservice Testing (IST) Workshops which were held in early 1997 pertaining to NRC Inspection Procedure P 73756, Inservice Testing of Pumps and Valves. It also presents the status of the ASME code committees` resolution of certain questions forwarded to the ASME by the NRC. These questions relate to code interpretations, inconsistencies in the code, and industry concerns that are most appropriately resolved through the ASME consensus process. The ASME committees reviewed the questions at their December 1997 and March 1998 code meetings. Of particular interest are those questions for which the ASME code committees did not agree with the NRC response. These questions, as well as those which the committees provided some additional insight or input, are presented in this paper.
Date: May 1, 1998
Creator: DiBiasio, A. M.

1st-Principles Step- and Kink-Formation Energies on Cu(111)

Description: In rough agreement with experimental values derived from Cu island shapes vs. temperature, ab-initio calculations yield formation energies of 0.27 and 0.26 eV/ step-edge-atom for (100)- and (111)-micro facet steps on Cu(lll), and 0.09 and 0.12 eV per kink in those steps. Comparison to ab-initio results for Al and Pt shows that as a rule, the average formation energy of straight steps on a close-packed metal surface equals -7% of the metal's cohesive energy.
Date: May 26, 1999
Creator: Feibelman, Peter J.

2607-W6 sanitary drainfield replacement

Description: The septic 2607-W6 which supports the 222-S complex is operating at 200% capacity. The septic tank has been inspected and found to be sound. Test hole excavations of the existing drainfield indicate that it is disposing of the current waste water effluent load as opposed to treating it. The system is over 40 years old and has not been approved by the Washington State Department of Health. Under the existing operating conditions it is subject to imminent failure. No additional tie-ins or increases in personnel are allowed which will increase the flow to the 2607-W6 system.
Date: May 1, 1994
Creator: Simmons, F. M.

3D-modeling for the LANL-APT RFQ

Description: An 8-m-long 4-vane radio frequency quadrupole (RFQ) has been proposed by LANL for use in high-current proton accelerators. This RFQ is made up of four 2-m-long coupled segments; the end regions and segment joints need full 3D modeling. In this paper, the strategies for piecewise treatment of the RFQ and results of the modeling are presented.
Date: May 1, 1996
Creator: Krawczyk, F.L. & Young, L.M.

3D numerical thermal stress analysis of the high power target for the SLC Positron Source

Description: The volumetrically nonuniform power deposition of the incident 33 GeV electron beam in the SLC Positron Source Target is hypothesized to be the most likely cause target failure. The resultant pulsed temperature distributions are known to generate complicated stress fields with no known closed-form analytical solution. 3D finite element analyses of these temperature distributions and associated thermal stress fields in the new High Power Target are described here. Operational guidelines based on the results of these analyses combined with assumptions made about the fatigue characteristics of the exotic target material are proposed. 6 refs., 4 figs.
Date: May 1, 1991
Creator: Reuter, E.M. & Hodgson, J.A.

3D particle simulations of space-charge-dominated beams in HIF accelerator experiments

Description: The development of a high current, heavy-ion beam for inertial confinement fusion requires a detailed understanding of the behavior of the beam, including effects of the large self-fields. This necessity makes particle-in-cell (PIC) simulation the appropriate tool, and for this reason, the three-dimensional PIC/accelerator code WARP3d is being developed. WARP3d has been used extensively to study the creation and propagation of ion beams both to support experiments and for the understanding of basic beam physics. An overview of the structure of the code is presented along with a discussion of features that make the code an effective tool in the understanding of space-charge dominated beam behavior. A number of applications where WARP3d has played an important role is discussed, emphasizing the need of three-dimensional, first principles simulations. Results and comparisons with experiment are presented.
Date: May 1, 1997
Creator: Grote, D.P.; Friedman, A.; Lund, S.M. & Haber, I.

3D unstructured mesh ALE hydrodynamics with the upwind discontinuous galerkin method

Description: The authors describe a numerical scheme to solve 3D Arbitrary Lagrangian-Eulerian (ALE) hydrodynamics on an unstructured mesh using a discontinuous Galerkin method (DGM) and an explicit Runge-Kutta time discretization. Upwinding is achieved through Roe's linearized Riemann solver with the Harten-Hyman entropy fix. For stabilization, a 3D quadratic programming generalization of van Leer's 1D minmod slope limiter is used along with a Lapidus type artificial viscosity. This DGM scheme has been tested on a variety of hydrodynamic test problems and appears to be robust making it the basis for the integrated 3D inertial confinement fusion modeling code (ICF3D). For efficient code development, they use C++ object oriented programming to easily separate the complexities of an unstructured mesh from the basic physics modules. ICF3D is fully parallelized using domain decomposition and the MPI message passing library. It is fully portable. It runs on uniprocessor workstations and massively parallel platforms with distributed and shared memory.
Date: May 7, 1999
Creator: Kershaw, D S; Milovich, J L; Prasad, M K; Shaw, M J & Shestakov, A I

A 3He{sup +}{sup +} RFQ accelerator for the production of PET isotopes

Description: Project status of the 3He{sup +}{sup +} 10.5 MeV RFQ Linear Accelerator for the production of PET isotopes will be presented. The accelerator design was begun in September of 1995 with a goal of completion and delivery of the accelerator to BRF in Shreveport, Louisiana by the summer of 1997. The design effort and construction is concentrated in Lab G on the Fermilab campus. Some of the high lights include a 25 mA peak current 3He` ion source, four RFQ accelerating stages that are powered by surplus Fermilab linac RF stations, a gas jet charge doubler, and a novel 540 degree bending Medium Energy Beam Transport (MEBT). The machine is designed to operate at 360 Hz repetition rate with a 2.5% duty cycle. The average beam current is expected to be 150-300 micro amperes electrical, 75- 150 micro amperes particle current.
Date: May 1, 1997
Creator: Pasquinelli, R.J. & Collaboration, E887

Ab initio molecular orbital calculations of molten salt vapor complexes using Gaussian-2 theory: LiAlF{sub 4} and NaAlF{sub 4}

Description: The structures and energies of the molten salt vapor complexes LiAlF{sub 4} and NaAlF{sub 4} are studied using new high level ab initio molecular orbital methods. The structures are determined using Moller-Plesset perturbation theory to second-order and the total energies are determined using a recently introduced modification of Gaussian-2 (G2) theory. The total energies are used to determine relative energies of the corner-, edge-, and face-bridged structures and accurate reaction energies. The results are compared to previous theoretical and experimental studies.
Date: May 1993
Creator: Curtiss, L. A.

Above Bonneville Passage and Propagation Cost Effectiveness Analysis.

Description: We have developed several models to evaluate the cost-effectiveness of alternative strategies to mitigate hydrosystem impacts on salmon and steelhead, and applied these models to areas of the Columbia River Basin. Our latest application evaluates the cost-effectiveness of proposed strategies that target mainstem survival (e.g., predator control, increases in water velocity) and subbasin propagation (e.g., habitat improvements, screening, hatchery production increases) for chinook salmon and steelhead stocks, in the portion of the Columbia Basin bounded by Bonneville, Chief Joseph, Dworshak, and Hells Canyon darns. At its core the analysis primarily considers financial cost and biological effectiveness, but we have included other attributes which may be of concern to the region.
Date: May 1, 1993
Creator: Paulsen, C. M.; Hyman, J. B. & Wernstedt, K.

Absolute, soft x-ray calorimetry on the Z facility at Sandia National Laboratories

Description: Simple and reliable x-ray fluence measurements, in addition to time-resolved diagnostics, are needed to understand the physics of hot Z-pinch plasmas. A commercially available laser calorimeter has been modified for measuring soft x-ray fluence from the Z facility at Sandia National Laboratories. The x-ray absorber of this calorimeter is an aluminum disk, attached to a two-dimensional thermopile and surrounded by an isoperibol shroud. The time-integral and the maximum of the thermopile voltage signal are both proportional to the x-ray energy deposited. Data are collected for 90 seconds, and the instrument has, thus far, been used in the 1--25 mJ range. A wider dynamic measuring range for x-ray fluence (energy/area) can be achieved by varying the area of the defining aperture. The calorimeter is calibrated by an electrical substitution method. Calibrations are performed before and after each x-ray experiment on the Z facility. The calibration of the time-integral of the thermopile voltage vs. energy deposited (or the peak of thermopile voltage vs. energy deposited) is linear with zero offset at the 95% confidence level. The irreproducibility of the calibration is <2%, and the imprecision in the measurement of the incident x-ray energy (inferred from signal noise and the calibration) is estimated to be {approximately}0.9 mJ (95% confidence level). The inaccuracy is estimated at {+-}10%, due to correctable systematic errors (e.g., baseline shifts). Comparisons have been made of the calorimeter to time-resolved x-ray diagnostics, e.g., bolometers and XRD (x-ray diode) arrays, by integrating the flux measured by these instruments over time.
Date: May 1, 1998
Creator: Fehl, D.L.; Muron, D.J.; Leeper, R.J.; Chandler, G.A.; Deeney, C. & Spielman, R.B.

Abstracts and parameter index database for reports pertaining to the unsaturated zone and surface water-ground water interactions at the Idaho National Engineering Laboratory

Description: This report is a product generated by faculty at the University of Idaho in support of research and development projects on Unsaturated Zone Contamination and Transport Processes, and on Surface Water-Groundwater Interactions and Regional Groundwater Flow at the Idaho National Engineering Laboratory. These projects are managed by the State of Idaho`s INEL Oversight Program under a grant from the US Department of Energy. In particular, this report meets project objectives to produce a site-wide summary of hydrological information based on a literature search and review of field, laboratory and modeling studies at INEL, including a cross-referenced index to site-specific physical, chemical, mineralogic, geologic and hydrologic parameters determined from these studies. This report includes abstracts of 149 reports with hydrological information. For reports which focus on hydrological issues, the abstracts are taken directly from those reports; for reports dealing with a variety of issues beside hydrology, the abstracts were generated by the University of Idaho authors concentrating on hydrology-related issues. Each abstract is followed by a ``Data`` section which identifies types of technical information included in a given report, such as information on parameters or chemistry, mineralogy, stream flows, water levels. The ``Data`` section does not include actual values or data.
Date: May 1, 1993
Creator: Bloomsburg, G.; Finnie, J.; Horn, D.; King, B. & Liou, J.

AC susceptibility and critical current in the organic superconductor {kappa}-(ET){sub 2}Cu(NCS){sub 2}

Description: The AC susceptibility (X{prime}, X{double_prime}) has bee measured in a single crystal of the organic superconductor K-(ET){sub 2}Cu(NCS){sub 2} ({Tc} = 9.5 K) as a function of the DC magnetic field, for several frequencies (10 {sup 2} Hz <f <10{sup 4} Hz) and different AC fields (l{mu}T <h{sub dc} <300{mu}T) at fixed temperatures.
Date: May 1, 1994
Creator: Gonzalez, M. A.; Velez, M.; Vicent, J. L.; Schleuter, J.; Williams, J. M. & Crabtree, G. W.

Accelerated aging studies and environmental stability of prototype tamper tapes

Description: This report describes the results of accelerated aging experiments (weathering) conducted on prototype tamper tapes bonded to a variety of surface materials. The prototype tamper tapes were based on the patented Confirm{reg_sign} tamper-indicating technology developed and produced by 3M Company. Tamper tapes bonded to surfaces using pressure sensitive adhesive (PSA) and four rapid-set adhesives were evaluated. The configurations of the PSA-bonded tamper tapes were 1.27-cm-wide Confirm{reg_sign} 1700 windows with vinyl underlay and 2.54-cm-wide Confirm{reg_sign} 1700 windows with vinyl and polyester underlays. The configurations of the rapid-set adhesive-bonded tamper tapes were 2.54-cm-wide Confirm{reg_sign} (1700, 1500 with and without primer, and 1300) windows with vinyl underlay. Surfaces used for bonding included aluminum, steel, stainless steel, Kevlar{reg_sign}, brass, copper, fiberglass/resin with and without gel coat, polyurethane-painted steel, acrylonitrile:butadiene:styrene plastic, polyester fiberglass board, Lexan polycarbonate, and cedar wood. Weathering conditions included a QUV cabinet (ultraviolet light at 60{degrees}C, condensing humidity at 40{degrees}C), a thermal cycling cabinet (-18{degrees}C to 46{degrees}C), a Weather-O-Meter (Xenon lamp), and exposure outdoors in Daytona Beach, Florida. Environmental aging exposures lasted from 7 weeks to 5 months. After exposure, the tamper tapes were visually examined and tested for transfer resistance. Tamper tapes were also exposed to a variety of chemical liquids (including organic solvents, acids, bases, and oxidizing liquids) to determine chemical resistance and to sand to determine abrasion resistance.
Date: May 1, 1995
Creator: Wright, B.W.; Wright, C.W. & Bunk, A.R.

Accelerated hygrothermal stabilization of composite materials

Description: Experimentation validated a simple moisture conditioning scheme to prepare Gr/Ep composite parts for precision applications by measuring dimensional changes over 90 days. It was shown that an elevated temperature moisture conditioning scheme produced a dimensionally stable part from which precision structures could be built/machined without significant moisture induced dimensional changes after fabrication. Conversely, that unconditioned Gr/Ep composite panels exhibited unacceptably large dimensional changes (i.e., greater than 125 ppM). It was also shown that time required to produce stable parts was shorter, by more than an order of magnitude, employing the conditioning scheme than using no conditioning scheme (46 days versus 1000+ days). Two final use environments were chosen for the experiments: 50% RH/21C and 0% RH/21C. Fiberite 3034K was chosen for its widespread use in aerospace applications. Two typical lay-ups were chosen, one with low sensitivity to hygrothermal distortions and the other high sensitivity: [0, {plus_minus} 45, 90]s, [0, {plus_minus} 15, 0]s. By employing an elevated temperature, constant humidity conditioning scheme, test panels achieved an equilibrium moisture content in less time, by more than an order of magnitude, than panels exposed to the same humidity environment and ambient temperature. Dimensional changes, over 90 days, were up to 4 times lower in the conditioned panels compared to unconditioned panels. Analysis of weight change versus time of test coupons concluded that the out-of-autoclave moisture content of Fiberite 3034K varied between 0.06 and 0.1%.
Date: May 1, 1994
Creator: Gale, J. A.

Accelerated test methods for life prediction of hermetic motor insulation systems exposed to alternative refrigerant/lubricant mixtures. Phase 3: Reproducibility and discrimination testing. Final report

Description: In 1992, the Air-Conditioning and Refrigeration Technology Institute, Inc. (ARTI) contracted Radian Corporation to ascertain whether an improved accelerated test method or procedure could be developed that would allow prediction of the life of motor insulation materials used in hermetic motors for air-conditioning and refrigeration equipment operated with alternative refrigerant/lubricant mixtures. This report presents the results of phase three concerning the reproducibility and discrimination testing.
Date: May 6, 1996
Creator: Ellis, P.F. II; Ferguson, A.F. & Fuentes, K.T.