UNT Libraries Government Documents Department - 36,741 Matching Results

Search Results

open access

0.25mm-Thick CCD Packaging for the Dark Energy Survey Camera Array

Description: Abstract: The Dark Energy Survey Camera focal plane array will consist of 62 2k x 4k CCDs with a pixel size of 15 microns and a silicon thickness of 250 microns for use at wavelengths between 400 and 1000 nm. Bare CCD die will be received from the Lawrence Berkeley National Laboratory (LBNL). At the Fermi National Accelerator Laboratory, the bare die will be packaged into a custom back-side-illuminated module design. Cold probe data from LBNL will be used to select the CCDs to be packaged. The … more
Date: 2006-06~
Creator: Derylo, Greg; Diehl, H. Thomas & Estrada, Juan
open access

0.52eV Quaternary InGaAsSb Thermophotovoltaic Diode Technology

Description: Thermophotovoltaic (TPV) diodes fabricated from 0.52eV lattice-matched InGaAsSb alloys are grown by Metal Organic Vapor Phase Epitaxy (MOVPE) on GaSb substrates. 4cm{sup 2} multi-chip diode modules with front-surface spectral filters were tested in a vacuum cavity and attained measured efficiency and power density of 19% and 0.58 W/cm{sup 2} respectively at operating at temperatures of T{sub radiator} = 950 C and T{sub diode} = 27 C. Device modeling and minority carrier lifetime measurements of… more
Date: June 9, 2004
Creator: Dashiell, M. W.; Beausang, J. F.; Nichols, G.; Depoy, D. M.; Danielson, L. R.; Ehsani, H. et al.
open access

A 1 MEGAWATT POLYPHASE BOOST CONVERTER-MODULATOR FOR KLYSTRON PULSE APPLICATION

Description: This paper describes electrical design criteria and first operational results a 140 kV, 1 MW average, 11 MW peak, zero-voltage-switching 20 kHz polyphase bridge, boost converter/modulator for klystron pulse application. The DC-DC converter derives the buss voltages from a standard 13.8 kV to 2300 Y substation cast-core transformer. Energy storage and filtering is provided by self-clearing metallized hazy polypropylene traction capacitors. Three ''H-Bridge'' Insulated Gate Bipolar Transistor (IG… more
Date: June 1, 2001
Creator: Reass, W. A.; Doss, J. D. & Gribble, R. F.
open access

1 nA beam position monitoring system

Description: A system has been developed at Jefferson Lab for measuring transverse position of very low current beams delivered to the Experimental Hall B of the Continuous Electron Beam Accelerator Facility (CEBAF). At the heart of the system is a position sensitive cavity operating at 1497 MHz. The cavity utilizes a unique design which achieves a high sensitivity to beam position at a relatively low cavity Q. The cavity output RF signal is processed using a down-converter and a commercial lock-in amplifie… more
Date: June 1, 1997
Creator: Ursic, R.; Flood, R. & Piller, C.
open access

A 1- to 5-MW, RCS-based, short-pulse spallation neutron source

Description: Two accelerator configurations, the linac/compressor ring scheme and the linac/RCS scheme, are commonly used to provide the proton beam power for a short-pulse spallation neutron source. In one configuration, a full-power linac provides the beam power and a compressor ring shortens the pulse length from 1-ms down to 1 {micro}s. In the other, rapid cycling synchrotrons (RCSs) provide the beam power and also shorten the pulse length. A feasibility study of a staged approach to a 5-MW proton sourc… more
Date: June 1997
Creator: Cho, Y.; Chae, Y.-C. & Crosbie, E.
open access

2.1 Pan-WCRP Monsoon Modelling Workshop Summary

Description: Ken Sperber led a discussion of the outcome of the Pan-WCRP Monsoon Modelling Workshop that was held at the University of California at Irvine from 15-17 June 2005. At the workshop presentations from key CLIVAR and GEWEX panels were presented to highlight the outstanding problems in modelling the Earth's monsoons. Additionally, presentations from invited experts were given to highlight important aspects of monsoon phenomena and processes, such as low-level jets, air-sea interaction, predictabil… more
Date: June 28, 2005
Creator: Sperber, K R
open access

2-D or not 2-D, that is the question: A Northern California test

Description: Reliable estimates of the seismic source spectrum are necessary for accurate magnitude, yield, and energy estimation. In particular, how seismic radiated energy scales with increasing earthquake size has been the focus of recent debate within the community and has direct implications on earthquake source physics studies as well as hazard mitigation. The 1-D coda methodology of Mayeda et al. has provided the lowest variance estimate of the source spectrum when compared against traditional approa… more
Date: June 6, 2005
Creator: Mayeda, K; Malagnini, L; Phillips, W S; Walter, W R & Dreger, D
open access

A 2-D Self-Consistent DSMC Model for Chemically Reacting Low Pressure Plasma Reactors

Description: This paper will focus on the methodology of using a 2D plasma Direct Simulation Monte Carlo technique to simulate the species transport in an inductively coupled, low pressure, chemically reacting plasma system. The pressure in these systems is typically less than 20 mtorr with plasma densities of approximately 10{sup 17} {number_sign}/m{sup 3} and an ionization level of only 0.1%. This low ionization level tightly couples the neutral, ion, and electron chemistries and interactions in a system … more
Date: June 17, 1999
Creator: Bartel, Timothy J.; Economou, Demetre & Johannes, Justine E.
open access

A 2-Megawatt load for testing high voltage dc power supplies

Description: A high power water-cooled resistive load, capable of dissipating 2 Megawatts at 95 kilovolts is being designed and built. The load utilizes wirewound resistor elements suspended inside insulating tubing contained within a pressure vessel which is supplied a continuous flow of deionized water for coolant. A sub-system of the load is composed of non-inductive resistor elements in an oil tank. Power tests conducted on various resistor types indicate that dissipation levels as high as 22 times the … more
Date: June 1, 1993
Creator: Horan, D.; Kustom, R.; Ferguson, M. & Primdahl, K.
open access

A 2-MV multi-beam injector for heavy ion fusion

Description: Construction of a sixteen beam (0.5 A per beam) injector for use in scaled heavy ion fusion experiments is underway at LBL. The machine was designed and partially constructed at LANL. The injector is designed to use carbon arc sources which will provide 25 mA/cm/sup 2/ of extractable current density. The plasma from the arcs is confined electrostatically from drifting into the ion gun before firing the extraction pulse. The acceleration column consists of a set of aperture lenses which both tra… more
Date: June 1, 1988
Creator: Rutkowski, H. L.; Faltens, A.; Vanecek, D.; Pike, C.; Humphries, S., Jr. & Meyer, E. A.
open access

2 MW upgrade of the Fermilab Main Injector

Description: In January 2002, the Fermilab Director initiated a design study for a high average power, modest energy proton facility. An intensity upgrade to Fermilab's 120-GeV Main Injector (MI) represents an attractive concept for such a facility, which would leverage existing beam lines and experimental areas and would greatly enhance physics opportunities at Fermilab and in the U.S. With a Proton Driver replacing the present Booster, the beam intensity of the MI is expected to be increased by a factor o… more
Date: June 4, 2003
Creator: Chou, Weiren
open access

2, Pulse-mode expansions and refractive indices in plane-wave propagation

Description: This memo presents basic background theory for treating simultaneous propagation of electromagnetic pulses of various colors, directed along a common ray, through a molecular vapor. The memo discusses some techniques for expanding the positive frequency part of the transverse electric field into pulse modes, characterized by carrier frequencies within a modulated envelope. We discuss, in the approximation of plane waves with slowly varying envelopes, a set of uncoupled envelope equations in whi… more
Date: June 20, 1987
Creator: Shore, B. W.; Sacks, R.; Karr, T.; Morris, J. & Paisner, J. A.
open access

3.9 GHz superconducting accelerating 9-cell cavity vertical test results

Description: The 3rd harmonic 3.9GHz accelerating cavity was proposed to improve the beam performance of the FLASH (TTF/DESY) facility [1]. In the frame of a collaborative agreement, Fermilab will provide DESY with a cryomodule containing a string of four cavities. In addition, a second cryomodule with one cavity will be fabricated for installation in the Fermilab photo-injector, which will be upgraded for the ILC accelerator test facility. The first 9-cell Nb cavities were tested in a vertical setup and th… more
Date: June 1, 2007
Creator: Khabiboulline, Timergali; Cooper, Charles; Dhanaraj, Nandhini; Edwards, Helen; Foley, Mike; Harms, Elvin et al.
open access

3-D hybrid PIC code to model the tilt mode in FRCs

Description: The results from QN3D are presented. QN3D is a 3-dimensional hybrid particle-in-cell code designed to run efficiently on the Cray-2 Multiprocessor. The chief application has been to the tilt mode instability in FRCs. QN3D accepts as input, the magnetic field, the ion particle density and the ion temperature on a two-dimensional r-z grid. These quantities are interpolated to the rest of the cartesian grid under the assumption of azimuthal symmetry. The particles are initialized with random numbe… more
Date: June 1, 1987
Creator: Horowitz, E. J. & Shumaker, D. E.
open access

3-D Seismic Experimentation and Advanced Processing/Inversion Development for Investigations of the Shallow Subsurface

Description: Gian Fradelizio, a Rice Ph.D. student has completed reprocessing the 3D seismic reflection data acquired at Hill AFB through post-stack depth migration for comparison to the traveltime and waveform tomography results. Zelt, Levander, Fradelizio, and 5 others spent a week at Hill AFB in September 2005, acquiring an elastic wave data set along 2 profiles. We used 60 3-component Galperin mounted 40 Hz geophones recorded by 3 GEOMETRICS Stratavision systems. The seismic source employed was a sledge… more
Date: June 1, 2005
Creator: Levander, Alan R.
open access

3-D Spectral Induced Polarization (IP) Imaging: Non-Invasive Characterization Of Contaminant Plumes

Description: The overall objective of this project is to develop the scientific basis for characterizing contaminant plumes in the earth's subsurface using field measurements of induced polarization (IP) effects. Three specific objectives towards this end are 1. 2. 3. Understanding IP at the laboratory level through measurements of complex resistivity as a function of frequency in rock and soil samples with varying pore geometries, pore fluid conductivities and saturations, and contaminant chemistries and c… more
Date: June 1, 1997
Creator: Morgan, Dale F.; Lesmes, David P.; Rodi, William; Shi, Weiqun; Frye, Kevin, M. & Sturrock, John
open access

3-D Spectral IP Imaging: Non-Invasive Characterization DE FG02 96ER 14714

Description: The Earth Resources Laboratory (ERL) performed a broad foundational study of spectral induced polarization (SIP) for site characterization. The project encompassed laboratory studies of microgeometry and chemistry effects on Induced Polarization (IP), an investigation of electromagnetic coupling (emc) noise, and development of 3D modeling and inversion codes. The major finding of the project is that emc noise presents a critical limitation for field implementation of SIP and conventional correc… more
Date: June 1, 2000
Creator: Morgan, F. Dale; Rodi, William & Lesmes, David
open access

3-D Spectral IP Imaging: Non-Invasive Characterization of Contaminant Plumes

Description: The overall objective of this project is to develop the scientific basis for characterizing contaminant plumes in the earth's subsurface using field measurements of induced polarization (IP) effects. Three specific objectives towards this end are: (1) Understanding IP at the laboratory level through measurements of complex resistivity as a function of frequency in rock and soil samples with varying pore geometries, pore fluid conductivities and saturations, and contaminant chemistries and conce… more
Date: June 1, 1998
Creator: Morgan, F. Dale; Rodi, William & Lesmes, David
open access

3-D Spectral IP Imaging: Non-Invasive Characterization of Contaminant Plumes. 1998 Annual Progress Report

Description: 'The overall objective of this project is to develop the scientific basis for characterizing contaminant plumes in the earth''s subsurface using field measurements of induced polarization (IP) effects. Three specific objectives towards this end are: (1) understanding IP at the laboratory level through measurements of complex resistivity as a function of frequency in rock and soil samples with varying pore geometries, pore fluid conductivities and saturations, and contaminant chemistries and con… more
Date: June 1, 1998
Creator: Morgan, F. D.; Rodi, W. & Lesmes, D.
open access

3 GeV Booster Synchrotron Conceptual Design Report

Description: Synchrotron light cna be produced from a relativistic particle beam circulating in a storage ring at extremely high intensity and brilliance over a large spectral region reaching from the far infrared regime to hard x-rays. The particles, either electrons or positrons, radiate as they are deflected in the fields of the storage ring bending magnets or of magnets specially optimized for the production of synchrotron light. The synchrotron light being very intense and well collimated in the forwar… more
Date: June 2, 2009
Creator: Wiedemann, Helmut
open access

3-megajoule heavy-ion fusion driver

Description: The initiation of inertial confinement fusion reactions with a heavy ion particle beam has been under intensive study since 1976, and the progress of this study is principally documented in the proceedings of annual workshops held by US National Laboratories. At this time a 3MJ, 150 TW, ion beam is a good choice to initiate microexplosions with energy gain of 100. The Lawrence Berkeley Laboratory has made systems studies based on a Linear Induction Accelerator to meet the beam requirements. The… more
Date: June 1, 1981
Creator: Faltens, A.; Hoyer, E. & Keefe, D.
Back to Top of Screen